Conformational studies by far infrared and Raman spectra of gases

One of the major goals of conformational analysis is the calculation of the energy difference between two or more conformers, ΔE, as well as the energy necessary for interconversion. The calculation of these energy quantities is facilitated by using a potential function which describes the vibrational motion, or internal rotation (torsion), as a function of the dihedral angle, α. The potential function is called asymmetric because both the frame and top portions of the molecule have no symmetry element higher than a plane. The most common type of potential function where at least one of the minima coincides with the plane of symmetry is of the type: V(α) = $\text{1}\text{2}$ΣV_i(1 - cos iα). The kinetic energy term, F(α), is extremely complicated. In general, if the only data being used to calculate the potential function are torsional transitions, and if one continues within the boundary conditions of a one-dimensional problem, then a cosine expansion of F(α) should be adequate: F(α) = F₀ + ΣF_i cos iα. For those systems where there is an equilibrium between a planar form and two non-planar forms, V₃ is usually the predominant term. This is because V₃ represents a three maxima/three minima potential per 2π (360°) internal rotation. In a similar fashion, V₂ is found to be the predominant term in the potential function for a system consisting of two equivalent non-planar conformers. Several examples of our most recent studies are given where the potential function for interconversion of two conformers has been determined.     

N-halogeno-compounds. Part 9 [1]. Azoxy- and azo-arenes derived from 4-(dichloroamino)tetrafluoropyridine; crystal structure of trans-2,3,5,6-tetrafluoro-4-(2,4,6-trimethylphenyl-onn-azoxy)pyridine

The nitrosoarenes ArNO (Ar = C₆H₅, 2-MeC₆H₄, 2,4,6- Me₃C₆H₂ and C₆F₅) have been condensed with 4-(dichloroamino)- tetrafluoropyridine to provide the azoxy-compounds py_FN$\text{N}\text{+}$($\text{N}\text{-}$)Ar (py_F = 2,3,5,6-tetrafluoro-4-pyridyl); de-oxygenation of the first three with triphenylphosphine or triethyl phosphite gave the corresponding azo-compounds, and the reverse reaction was achieved in the case of py_FNNC₆H₂Me₃-2,4,6 using peroxytrifluoroacetic acid. Thermolysis of 4-azidotetrafluoropyridine in the presence of pentafluoronitrosobenzene provided the perfluorinated azoxy-compound py_FN$\text{N}\text{+}$($\text{O}\text{-}$)C₆F₅. X-Ray methods have been used to determine the molecular geometry of py_FN$\text{N}\text{+}$($\text{O}\text{-}$)C₆H₂Me₃-2,4,6.     

Potential function of the internal rotation of a methacrolein molecule in the ground (<Emphasis Type="Italic">S</Emphasis> <Subscript>0</Subscript>) electronic state

The structural parameters of s-trans- and s-cis-isomers of a methacrolein molecule in the ground (S₀) electronic state are determined by means of MP2 method with the cc-pVTZ basis set. Kinematic factor F(φ) is expanded in a Fourier series. The potential function of internal rotation (PFIR) of methacrolein in this state is built using experimental frequencies of transitions of the torsional vibration of both isomers, obtained from an analysis of the vibrational structure of the high-resolution UV spectrum with allowance for the geometry and difference between the energy (ΔH) of the isomers. It is shown that the V_n parameters of the potential function of internal rotation of the molecule, built using the frequencies of the transition of the torsional vibrations of s-trans- and s-cis-isomers of the methacrolein molecule, determined from vibrational structure of the high-resolution UV spectrum and the FTIR spectrum, are close.     

Coordination chemistry of higher oxidation states. 10 [1]. Oxofluoroanions of osmium(VIII) [OsO4F2]2− and [OsO3F3]−

Trioxotrifluoroosmates(VIII) M[OsO₃F₃] (M = Cs, Rb, K) have been prepared by direct combination of OsO₃F₂ and the appropriate alkali fluoride MF. The reaction of OsO₄ with M′F (M′ = Cs, Rb) in aqueous solution produces the tetraoxodifluoroosmates(VIII) M′₂[OsO₄F₂]. On the basis of their vibrational spectra the assignment of a $\text{fac}$ (C_3v) structure to [OsO₃F₃]^? and a $\text{cis}$ (C_2v) to [OsO₄F₂]^2? is proposed. The electronic spectra of the anions have been recorded and are interpreted using the optical electronegativity concept.     

Ligandbewegungen in űbergangsmetallkomplexen XI 1H-NMR-spektroskopische untersuchungen an acetylacetonat-bis(olefin)-rhodium(I)-komplexen

The temperature-dependent ¹H NMR spectra of acetylacetonatebis(ethylene)-rhodium, (acac)Rh(C₂H₄)₂ (I), of some related complexes containing methoxy-substituted ethylenes have been measured in toluene-d₈ solution. Both monosubstituted [(acac)Rh(C₂H₄)(olefin), olefin = tetramethoxyethylene (II), $\text{cis}$- and $\text{trans}$-dimethoxyethylene (III and IV)] and disubstituted [(acac)Rh(olefin)₂, olefin = $\text{cis}$- and $\text{trans}$-dimethoxyethylene (V and VI), methyl vinyl ether (VII)] derivatives of I have been investigated with respect to hindered intramolecular movements of the ligands. The barriers of olefin rotation increase with an increasing number of methoxy substituents. When the olefin rotation is frozen out; the methoxy substituents of the olefins tend to be turned away from the acetylacetonate ligand unless steric interaction occurs between the two π-coordinated olefins. A hindered movement of the acetylacetonate ligand has been observed in II and V. For this movement which is independent of the olefin rotation, a degenerate rearrangement is proposed of the tetragonal-planar complexes via a tetrahedral transition state.     

The synthesis of a cationic ylide complex of platinum(II) by the reaction of tetrakis(triphenylphosphine)platinum(O) with choloroiodomethane.

The reaction of Pt(PPh₃)₄ with CH₂Cl1 in benzene yields the cationic ylide complex $\text{cis}$-[Pt(PPh₃)₂(CH₂PPh₃)Cl]I in high yield. This complex has been converted to $\text{cis}$-[(PPh₃)₂(CH₂PPh₃)X]X (X  Br or I) by reaction with LiBr or NaI. Reaction of $\text{cis}$-[Pt(PPH₃)I]I with iodine yields $\text{cis}$-[Pt(PPh₃)₂(CH₂PPh₃)I]I₃. Nmr data are given in support of the suggested structures.     

A study of the structure of fluoroethylenes ab-initio calculations on C2F4

Ab-initio calculations on C₂F₄, with full geometry optimization in a ($\text{7}\text{3}$) and a ($\text{9}\text{5}$) basis are reported. The predicted geometries, orbital energies and populations are discussed in view of the different basis sets and previous calculations of the other fluoroethylenes. The effects of substituting a hydrogen atom with a fluorine atom are rather local, the effects on the populations being additive in all fluoroethylenes except C₂F₄. A short comparison between the basis sets is presented.     

The Stereochemistry of simple enols in solution

On the basis of their ¹H n.m.r. spectra it is concluded that vinyl alcohol and $\text{trans}$-1-propenol exist mainly in the $\text{syn}$-conformation and that $\text{cis}$-1-propenol and 2-methyl-1-propenyl exist mainly in the $\text{anti}$ conformation.     

Model predictions of mean librational frequencies for rigid molecules in dilute decalin solution

The product of the reduced inertia J_r of a dipolar molecule and the square of the far infrared absorption maximum wave-number $\text{ν}$_max that it displays in dilute solution is shown, using a three-parameter Mori/itinerant oscillator model, to be related to the mean-square action on the molecule and hence by a simple argument to the solute volume of rotation V. Estimates of V have been made for seventeen rigid molecules (mainly substituted phenyls) and their $\text{ν}$_max values have been measured in decalin solution at 293 and 110 K. Provided allowance is made for translation—rotation coupling in four cases, the derived relation I_r$\text{ν}$²_max = (8a_a²c²kT)^?1V²P(0) is found to be approximately obeyed at both temperatures with P(0) (the solute-independent mean-square torque acting on a molecule of unit V) having a value of 4.0 × 10¹⁷ (N m^?2)² at both temperatures. It should now be possible to predict $\text{μ}$_max for other solutes in decalin if their structures are known.     

Thermodynamic parameters of some partially fluorinated and hydrogenated amphiphilic enantiomers and their racemates in aqueous solution

Micellization properties of aqueous solutions of four enantiomeric/racemic pairs obtained from partially fluorinated octylesters (PFOEs) and hydrogenated dodecylesters (DDEs) of alanine and serine were investigated by electrical conductivity, surface tension and density measurements over the temperature range of (15 to 35) °C. The Krafft temperatures (T_Ks) of most of the esters were found to be below or near zero temperature. The critical micelle concentrations (cmcs) of the PFOEs were found to be larger than those of the DDEs from which it was calculated that a CF₂ group in the partially fluorinated chain is approximately equivalent to 1.8 CH₂ group in the hydrogenated dodecyl chain and there were no noteworthy differences in the cmcs of the L- and DL-forms of the studied amphiphiles. The thermodynamic quantities of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and adsorption (ΔG_ad), and the adsorption parameters at the air/water interface, the surface excess concentration (Γ_max), the minimum area per head group of a molecule (A_min) and the efficiency in the surface tension reduction (pC₂₀), were also calculated. It was found that the micellization for DDE of alanine and the adsorption for PFOE of serine were more favoured than the other L-and DL-forms where the latter was in part as dimer at the air/water interface. Furthermore, except for the ΔH_mic values, there were no significant differences in these quantities for the L-and DL-forms of the studied systems. The mass density measurements showed that the apparent molal volumes ($V_{\phi }^{\text{cmc}}\text{,}{V}_{\phi }^{\text{mic}}$) of the hydrogenated esters were strikingly larger than those of the partially fluorinated ones, whereas the change of the apparent molal volume upon micellization ($\mathrm{\Delta }{V}_{\phi }^{\text{mic}}$) exhibited reverse behaviour, from which it was concluded that the micelles of the partially fluorinated esters were larger than those of the hydrogenated ones.     

Synthesis and crystal structure of a π-allyl iron carbonyl complex derived from a fluorocarbon containing ligand by loss of fluorine

The β-chlorovinylphosphines R₂P$\text{C  CCl(C}$F₂)₃ (R = C₆H₅, C₆H₁₁) react with Fe(CO)₅ yielding compounds of stoichiometry

. The crystal structure of one of these (R = C₆H₁₁) has been determined from X-ray diffraction data and refined by least-squares to $\text{R}$ = 0.037 (2313 reflections with $\text{I}$ > 2.3σ_$\text{I}$). Crystals are triclinic, space group $\text{P}$$\text{1}$, $\text{a}$ = 10.253(5), $\text{b}$ = 15.590(7), $\text{c}$ = 9.390(4)Å, α = 99.88(3), β = 103.21(2), γ = 92.02(2)°, $\text{Z}$ = 2. The fluorinated π-allyl group is σ-bonded to one Fe atom and π-bonded to the other.     

Stereospecific 2-vinylcyclohexanol formation via internal attack of an allylsilane moiety on an aldehyde group

Acid catalyzed cyclization of ($\text{E}$)-HCO-(CH₂)-₄-CH=C(Me)-CH(SPh)SiMe₃ affords $\text{cis}$-2-substituted cyclohexanol, while ($\text{Z}$) compound affords the $\text{trans}$ isomer. Those cyclized products are transformed to the corresponding α-methyl γ-lactones.     

Preparation of fluoroalkylated benzoheterocycles using F-2-methylpropene

Several benzoheterocyclic compounds carrying a CH(CF₃)₂ group were prepared by the reactions of $\text{F}$-2-methylpropene with ortho-bifunctional benzenes. The reactivity and reaction mode of $\text{F}$-2-methylpropene in these reactions were compared with those of $\text{F}$-propene.     

Mechanistic Aspects of Inorganic Reactions. ACS Symposium Series 198 : (Ed. D.B. Rorabacher and J.F. Endicott), American Chemical Society,Washington DC, 1982, x + 486 pages, $ 58.95 ($ 48.95, U.S.A. and Canada). ISBN 0-5412-0734-8.

Norbornadiene (NBD) is more easily displaced from PtMe₂ (NBD) by other ligands than is cyclooctadiene (COD) from PtMe₂ (COD). cis-PtMe₂L₂ (L = py, $\text{1}\text{2}$tmen, $\text{1}\text{2}$en, NH₃, DMSO) have been prepared in this way. cis-PtMe₂py₂ is very reactive toward oxidative addition. Pyridine can usually be removed from the platinum(IV) products using acid. NBD is even more readily displaced from Pt(CF₃)₂ (NBD), giving cis-Pt(CF₃)₂L₂ (L = py, $\text{1}\text{2}$tmen, $\text{1}\text{2}$en, NH₃, DMSO, NCR, DMF, CN^?, I^?, acac^?). cis-Pt(CF₃)₂py₂ with CF₂I gives fac-Pt(CF₃)₃py₂I.     

Synthesis of cationic dialkylgold(III) complexes: nature of the facile reductive elimination of alkane

A series of gold(III) cations of the type cis-[CH₃)₂AuL₂]⁺ X^? where L  Ph₃, PMePh₂, PMe₂Ph, PMe₃, AsPh₃, AsPh₃, SbPh₃, $\text{1}\text{2}$H₂NCH₂CH₂NH₂, $\text{1}\text{2}$ Ph₂PCH₂CH₂-PPh₂, $\text{1}\text{2}$ Ph₂AsCH₂CH₂AsPh₂, and $\text{1}\text{2}$o-C₆H₄(AsMe₂)₂ and X  BF₄^?, PF₆^?, ClO₄^?, and F₃CSO₃^? has been prepared. In addition, the cis complexes [(CH₃)(CD₃)-Au(PPh₃)₂]F₃CSO₃, [(C₂H₅)₂Au(PPh₃)₂]F₃CSO and [(n-C₄H₉)₂Au(PPh₃)₂]F₃-CSO₃ have been synthesized. All have been characterized by PMR, Raman and infrared spectroscopy. These [R₂AuL₂]X compounds yield only ethane, butane, or octane via reductive elimination, and no disproportionation is observed. The alkane eliminations have been studied in CHCl₃, CH₃Cl₂, and CH₃COCH₃ solution as a function of temperature, concentration of the complex, and concentration of added ligand L. Elimination is fastest when L is bulky (PPh₃ > PMePh₂ > PMe₂Ph > PMe₃), decreases in the sequence SbPh₃ > AsPh₃ > PPh₃, is slow with chelating ligands, is inhibited by excess ligand, and there is small anion effect as X is varied. As R is varied, the rate of elimination decreases Bu ? Et > Me. An intramolecular dissociative mechanism is proposed which involves rapid elimination of alkane from an electron deficient dialkylgold(III) complex with nonequivalent gold—carbon bonds and produces the corresponding [AuL₂]X complex.     

Synthesis of 26,26,26-trifluoro-25-hydroxy and 27-nor-26,26,26-trifluoro-25-hydroxyvitamin D3

Two new fluorinated 25-hydroxyvitamin D₃ analogs, 26,26,26-trifluoro- 25-hydroxy ($\text{1}$) and 27-nor-26,26,26-trifluoro-25-hydroxyvitamin D₃ ($\text{2}$), were prepared from 24-phenylsulfonyl 25,26,27-triorcholest-5-en-3β-yl tetrahydropyranyl ether ($\text{3}$).     

Cross-conjugated biradicals: Kinetics and kinetic isotope effects in the thermal isomerizations of cis- and trans-2,3-dimethylemethylnecyclopropane,cis- and trans-3,4-dimethyl-1,2-dimethylenecyclobutane,and of 1,2,8,9-decatetraene

cis- and trans - 2,3 - Dimethylenemethylenecyclopropane ($\text{C}$ and $\text{T}$) interconvert at 160.0° with a small normal kinetic isotope effect (KIE) when the exo-methylene is deuterated, but the 1,3-shift products, 2-methylethylidenecyclopropane, show a large normal KIE, 1.35 and 1.31, when formed from $\text{C}$ and $\text{T}$, respectively. This data can be interpreted in terms of either parallel reactions or a common trimethylenemethane diradical intermediate formed with a normal KIE of 1.11 and closing to 1,3-shift product with a normal KIE of 1.29 due to the effect of deuterium in the required 90° rotation of the exo-methylene carbon.The kinetics of the thermal 1,3- and 3,3-shifts of cis- and rans-3,4-dimethyl-1,2-dimethylenecyclobutane ($\text{CB}$ and $\text{TB}$) were determined in a flow reactor. The first order rate constants are log k_CB (sec^?1) = 13.7 ? 42,200/2.3 RT and log k_TB (sec^?1) = 13.6 ? 41,900/2.3 RT (E_a in kcal/m) which compare favorably to that from the parent hydrocarbon. 1,2-dimethylenecyclobutane, after reasonable correction for dimethyl substitution.Rearrangement of $\text{TB}$ and its bis(dideuteriomethylene) derivative at 230.0° revealed a normal KIE of 1.08. This KIE could be interpreted in terms of either a methylene rotational isotope effect in a concerted reaction or formation of a bisallyl diradical with the expected normal rotational IE on closure to the 1,3-shift product of 1.12 with no IE in the ring opening when the result is corrected for return of the biradical to starting material.The kinetics of intramolecular 2 + 2 cycloaddition of 1,2,8,9-decatetraene were determined in a flow reactor. The first order rate constant is log k(sec^?1) = 9.4 ? 30,800/2.3 RT (E_a in kcal/m). These energetics are compared with those of other 2 + 2 cycloadditions. The major product is 3,4-dimethylenecyclooctene ($\text{DC}$) which is also found from the minor product, cis-7,8-dimethylenebicvyclo[4.2.0]octane ($\text{CO}$), at higher temperatures. The trans isomer, $\text{TO}$, also gives $\text{DC}$ at about the same rate as $\text{CO}$.     

Synthesis of perfluorochemicals for use as blood substitutes,Part I. Electrochemical fluorination of N-methyldecahydroquinoline and N-methyldecahydroisoquinoline

Electrochemical fluorination of N-methyldecahydroquinoline afforded mainly a mixture of $\text{cis}$ and $\text{trans}$ N-(F-methyl)-F-decahydroquinoline, their rearranged isomers and F-propyl-F-cyclohexane arising from the cleavage at carbon-nitrogen bonds, in a ratio of approximately 2:4:6:3. N-Methyldecahydroisoquinoline was also fluorinated electrochemically to give a mixture of $\text{cis}$ and $\text{trans}$ N-(F-methyl)-F-decahydroisoquinoline, their rearranged isomers and 1-(F-ethyl)-2-(F-methyl)-F-cyclohexane in a ratio of approximately 4:4:6:1. No correlation was found between the $\text{cis}$ and $\text{trans}$ ratio of starting materials and that of the corresponding perfluorinated amines. Fluorination of N-methyl-1,2,3,4-tetrahydroquinoline gave much lower yields.     

The preparation and properties of perfluoro-N-heptylbromine(N) tetrafluoride

Reactions of $\text{n}$C₇F₁₅Br with elemental fluorine at 0°C have produced perfluoro-$\text{n}$-heptylbromine(V) tetrafluoride ($\text{n}$-C₇F₁₅BrF₄). This derivative of BrF₅ was characterized by IR, ¹⁹FNMR, mass spectroscopy and elemental analysis. The reactions of $\text{n}$C₇F₁₅BrF₄ with 1,2-dichlorohexafluorocyclopentene-1 (C₅F₆Cl₂) and 1,2-dichlorooctafluorocyclohexene-1 (C₆F₈Cl₂) were used to demonstrate in the fluorinating ability of $\text{n}$C₇F₁₅BrF₄.     

Fluorocarbon derivatives of nitrogen. Part 14. Studies on some (CF3)2 no-substituted fluoroaromatics; thermal rearrangement of 4-[bis(trifluoromethyl)amino-oxy]tetrafluoropyridine

The sodium salt (CF₃)₂ NO⁻Na⁺ (I) [from (CF₃)₂NOH + NaH in Et₂O], is an alternative bis(trifluoromethyl)amino-oxylating agent to the adduct (CF₃)₂NOH.CsF (III). With pentafluoropyridine it affords 4-X.C₅F₄N (II) + 2,4-X₂.C₅F₃N (IV), [X = (CF₃)₂NO]. It has been used to obtain a number of new bis(trifluoromethyl)amino-oxy-compounds; $\text{i.e.}$ the following conversions have been effected: perfluoro-(4-isopropylpyridine)→ 2-X.C₅F₃N.CF(CF₃)₂-4 (V) + 2,6-X₂.C₅F₂N.CF(CF₃)₂-4 (VI); 3-chlorotetrafluoropyridine → 4-X.C₅F₃N.Cl-3 (VII) and 2-X.C₅F₃N.Cl-5 (VIII) (not separated) + 2,4-X₂.C₅F₂N.Cl-5 (IX), 3,5-dichlorotrifluoropyridine → 2- (XI) and 4-X.C₅F₂N.Cl₂-3,5 (X) (not separated) + 2,4-X₂.C₅FN.Cl₂-3,5 (XII); and perfluorotoluene → 4-X.C₆F₄.CF₃-1 (XIII). Hexafluorobenzene resisted attack by (CF₃)₂NONa under the conditions used with these aromatic substrates ($\text{ca}$ 20 °C). Static pyrolysis (125 °C) of 4-[bis(trifluoromethyl)amino-oxy]tetrafluoropyridine (II) gave a mixture of 6-bis(trifluoromethyl)amino]tetrafluoro-4-azacyclohexa-2, 4-dienone (XV) and 4-[bis(trifluoromethyl)amino]tetrafluoro-4-azacyclohexa-2,5-dienone (XVI). The ¹³C chemical shifts, assigned by analysis of ¹⁹F-coupled and ¹⁹F broad-band decoupled ¹³C n.m.r. spectra, are in accord with a +M effect similar to that of fluorine for a (CF₃)₂NO- substituent in the 2- and 4- positions of a polyfluoropyridine and a slightly smaller -I effect; the steric effect of (CF₃)₂NO on the shifts is less than that of chlorine. In contrast, a ring carbon carrying a (CF₃)₂CF- substituent is markedly shielded compared with one carrying fluorine, presumably by a steric effect.