Kinetic study on reactive extraction for chiral separation of phenylsuccinic acid enantiomers

The kinetics of the extraction of phenylsuccinic acid (PSA) enantiomers by hydroxypropyl-β-cyclodextrin (HP-β-CD) in a modified Lewis cell was studied, in which HP-β-CD dissolved in 0.1 mol L^?1 NaH₂PO₄/H₃PO₄ buffer solution (pH = 2.5) was selected as the chiral extractant. PSA enantiomers were extracted from organic phase to aqueous phase in the extraction module. The theory of extraction accompanied by a chemical reaction has been used to obtain the intrinsic kinetics of this extraction module. The different parameters affecting the extraction rate such as agitation speed, interfacial area, initial concentration of PSA enantiomers in organic phase as well as HP-β-CD concentration in aqueous phase were separately studied. The experimental results demonstrate that the extraction reactions are fast. The reactions were found to be first order with respect to PSA and second order with respect to HP-β-CD with forward rate constants of 3.4 × 10^?2 m⁶ mol^?2 s^?1 for R-PSA and 9.96 × 10^?3 m⁶ mol^?2 s^?1 for S-PSA. These data will be useful in the design of extraction processes.     

A study of the solubility of yttrium,praseodymium, neodymium,and gadolinium sulfates in the presence of sodium and potassium in sulfuric-phosphoric acid solutions at 20°C

Solubility of yttrium, praseodymium, neodymium, and gadolinium sulfates in the presence of sodium and potassium ions and the composition of solid phases were studied at 20°C in relation to the concentration of acids in sulfuric acid, phosphoric acid, and sulfuric-phosphoric acid solutions containing up to 36 wt % H₂SO₄ and 33.12 g 1^?1 H₃PO₄.     

Complexation of the [Rh(NH3)5H2O]3+ ion in aqueous solutions of H3PO4 based on 31P NMR data

The kinetics of the reaction between the [Rh(NH₃)₅H₂O]³⁺ ion and H₃PO₄ was studied by ³¹P NMR at 323?C343 K (E _a = 100.9 ± 0.3 kJ/mol, lnA = 35.7 ± 0.1). An empirical dependence of the ³¹P chemical shift on the equilibrium pH was found. The acid dissociation constants of the coordinated H₂PO ₄ ^? (3.9) and H PO ₄ ^2? ions (9.1) were estimated. The chemical shifts of the [Rh(NH₃)₅H₂PO₄]²⁺, [Rh(NH₃)₅HPO₄]⁺, and [Rh(NH₃)₅PO₄]⁰ complex ions were 8.38 ± 0.03, 10.76 ± 0.05, and 13.63 ± 0.05 ppm, respectively.     

Complexation of the [Rh(H2O)6]3+ ion with phosphoric acid as probed by 31P NMR

The kinetics of the reaction [Rh(H₂O)₆]³⁺ + H₃PO₄ ? [Rh(H₂O)₅H₂PO₄]²⁺ + H₃O⁺ has been studied by ³¹P NMR; E _a = 142 ± 12 kJ/mol, logA = 17 ± 2. An empirical dependence of the ³¹P NMR chemical shift on the equilibrium pH value has been found. The acid dissociation constant of the coordinated ion has been evaluated: pK = 1.5. The ³¹P NMR chemical shifts of individual [Rh(H₂O)₅H₂PO₄]²⁺ and [Rh(H₂O)₅HPO₄]⁺ complex ions are, respectively, 14.5 and 15.8 ppm at 323 K.     

A reversible fluorescent chemosensor for Fe~(3+) and H_2PO_4~- with “on-off-on” switching in aqueous media

To realize highly selective relay recognition of Fe3+ and H2PO4- ions, a simple benzimidazole-based fluorescent chemosensor(L) was designed and synthesized. Sensor L displays rapid, highly selective, and sensitive recognition to Fe3+ in H2O/DMSO(1:1, v/v) solutions. The in situ-generated L-Fe3+ complex solution exhibits a fast response and high selectivity toward dihydrogen phosphate anion via the Fe3+ displacement approach. The detection limits of sensor L to Fe3+ and L-Fe3+complex to H2PO4- anion were estimated to be 1.0 × 10-9 mol/L. Notably, the sensor was retrievable to indicate dihydrogen phosphate anions with Fe3+, and H2PO4-, in turn, increased. This successive recognition feature of sensor L makes it a potential utility for Fe3+ and H2PO4- anion detection in aqueous media.     

Kinetics and mechanism of oxidation of hydrazinium ion with peroxomonophosphoric acid in acid perchlorate solutions and role of trace iodide ions

The reaction of peroxomonophosphoric acid and hydrazinium ion in acid perchlorate solutions occurs as per stoichiometry (i), and the rate law (ii) at large [N₂H₅ ⁺], where K′_d is the first acid dissociation constant of H₃PO₅ and k ₁ and k ₂ are rate constants found to be 2.6 × 10^?4 s^?1 and 5.0 × 10^?2 M^?1 s^?1, respectively, at 35°. The reaction is greatly catalyzed by iodide ions. The mechanism involves a redox cycle I^?/I₂ and the rate is independent of [N₂H₅ ⁺] in the presence of iodide ions. K′_d was found to be 0.55 M^?1 and independent of temperature.     

Effect of inorganic ions on the photocatalytic degradation of humic acid

The article studies on the effects of six inorganic ions (Ca²⁺, Mg²⁺, Cl^?, SO ₄ ^2? , H₂PO ₄ ^? , and HCO ₃ ^? ) on titanium dioxide (TiO₂)-based photocatalytic degradation of humic acid (HA). We focus on the effects of the inorganic ions on HA characters, adsorption of HA on TiO₂ and photocatalytic degradation of HA. The results indicate that Ca²⁺ and Mg²⁺ with HA can form complexes which can decrease the solubility of HA, and then increase the HA adsorbed on TiO₂. However, the complex is more difficult to be degraded than HA. The effects of Cl^? and SO ₄ ^2? are closely related to their influences on HA solubility. The solubility changes of HA to some extent can enhance the adsorption of HA on TiO₂, and promote the photocatalytic degradation. Nevertheless, great solubility decreasing of HA can weaken the photocatalytic degradation. HCO ₃ ^? and H₂PO ₄ ^? can inhibit the photocatalytic degradation process seriously, because HCO ₃ ^? and H₂PO ₄ ^? are the strong scavengers of hydroxyl radicals, and can weaken the adsorption of HA on TiO₂ due to adsorption competition.     

Removal of uranium(VI) from aqueous solutions by new phosphorus-containing carbon spheres synthesized via one-step hydrothermal carbonization of glucose in the presence of phosphoric acid

The novel phosphorus-rich hydrothermal carbon spheres (HCSs–PO₄) have been synthesized via one-step hydrothermal carbonization of glucose in the presence of phosphoric acid. The textural and surface chemistry properties were characterized using Boehm titrations, scanning electron microscopy and Fourier transform infrared spectrometer. The content of oxygen-containing functional groups on the surface of HCSs increased from 0.053 to 1.009 mmol g^?1 by phosphate group modification. The adsorption ability of HCSs–PO₄ has been explored for the removal of uranium from aqueous solutions. The adsorption kinetic data were best described by the pseudo-second-order equation. Adsorption process could be well defined by the Langmuir isotherm, the adsorption capacity of HCSs increased from 80.00 to 285.70 mg g^?1 after phosphate group modification. And thermodynamic parameters indicated the adsorption process was feasible,endothermic and spontaneous. Selective adsorption studies showed that the HCSs–PO₄ could selectively remove U(VI), and the selectivity coefficients had been improved in the presence of co-existing ions, Na(I), Ni(II), Sr(II), Mn(II), Mg(II) and Zn(II). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 12.0 g HCSs–PO₄.     

Nature of polarographic catalytic current in the indium-acetylsalicylic acid system

The dependence of the limiting catalytic current in the system of In(III)-acetylsalycilic acid on the concentration of indium ions and the ligand anions was described theoretically. Dissociation and protonation constants of acetylsalycilic acid molecular form and kinetic parameter connected with the rate constant of formation of polarographically active complex {K _a = 3.59×10^?3, mol dm^?3; K _H = 0.12 mol dm^?3; k = 4.0×10², A (mol/dm^?3)²} were calculated.     

Analytical applications of the reaction of thorium with benzenephosphonic acid

Benzenephosphonic acid quantitatively precipitates thorium as Th(C₆H₅PO₃)₂·3H₂O at pH values as low as 0.5. The compound may be dried at 140° to 180° C and weighed, as a gravimetric means of determining thorium. On ignition, Th (C₂H₅PO₃)₂ 3 H₂O undergoes decomposition at 240° to 300° C to form Th(C₆H₅PO₃)₂·2H₂O, at 450° to 650° C to form Th(HPO₄)₂·2H₂O and finally at 800° to 1000° C to form Th(HPO₄)₂. The latter compound is stable to 1200° C.Potentiometrically (pK₁' = 0.91, pK₂' = 6.41) and spectrophotometrically (pK₁' = 0.96, pK₂' = 6.51) determined pK' values are reported. Absorption spectra of C₆H₅PO₃H₂, C₆H₅PO₃H^- and C₆H₅PO₃^-2 are reported. The solubility of Th (C₆H₅PO₃)₂·3H₂O was studied as a function of pH and the average value of the solubility product (K_sp = 4s³) was found to be 3.24·10^-31.     

Desorption chemical ionization tandem mass spectrometry of polyprenyl and dolichyl phosphates

Negative-ion desorption chemical ionization (DCI) tandem mass spectrometry was applied to the analysis of nanomole quantities of semisynthetic polyisoprenyl phosphates, the chain length of which ranged from 7 to 20 isoprene units. The DCI spectrum of all the compounds tested show the presence of independently generated ions [M-HPO₃-H]^?, [M-H₃PO₂-H]^? and [M-H₃PO₄-H]^? resulting from the loss of a part of or the entire phosphate group of a polyisoprenyl-P. In tandem mass spectrometry, the [M-H₃PO₄-H]^? fragment produces series of ions 68 mass units apart, indicative of the polyisoprenoid nature of a compound. Studies with deuterated and α-saturated polyisoprenyl phosphates demonstrated that fragmentations of the [M-H₃PO₄-H]^? ion proceed from both ends (α and ω) of a polyisoprenoid chain and may occur at either allylic (A) or vinylic (V) sites. Fragments of masses equal to [n×68 ? 1] and [n×68 ? 13] (where n is the number of isoprene units and 3≤n is less than the total number of isoprene residues within a polyisoprenoid chain) comprise the αA and ωV series, respectively, and represent the most abundant ions in tandem mass spectra of the [M-H₃PO₄-H]^? fragment of polyprenyl phosphates, α-Saturated dolichyl phosphates can be distinguished easily from corresponding polyprenyl phosphates not only on the basis of a 2-u shift of the [M-H₃PO₄-H]^? ion and the α series of fragments, but also because of the presence of an additional (A+14) series of ions 14 u heavier than fragments resulting from the allylic cleavages of an α-saturated polyisoprenoid chain. Possible mechanisms of the collision-induced dissociation reactions of polyprenyl phosphates are discussed.     

Kinetics and mechanism of the reduction of diaquotetrakis (2,2′-bipyridine)-µ-oxodiruthenium(III) ion by hypophosphorous acid in acidic medium

The kinetics and mechanism of the reduction of diaquotetrakis(2,2′-bipyridine)-µ-oxodiruthenium(III), [(H₂O)₂(bipy)₄Ru₂O]⁴⁺, by H₃PO₂ has been studied in aqueous acid at ionic strength = 0.5 mol dm^?3 (NaClO₄), [H⁺] = 5.0 × 10^?2 mol dm^?3 and temperature = 31 ± 1 °C. Measurement of the stoichiometry showed that 1 mole of [(H₂O)₂(bipy)₄Ru₂O]⁴⁺ was reduced by 1 mole of H₃PO₂. The reaction was found to be first order with respect to both [(H₂O)₂(bipy)₄Ru₂O⁴⁺] and [H₃PO₂], hence second order overall. Variations in the ionic strength and dielectric constant of the reaction medium had no effect on the rate. Also, addition of various ions to the reaction medium did not significantly alter the rate. Free radicals were identified during the course of the reaction by a polymerisation test. Spectroscopic information and Michaelis–Menten plots suggested the absence of an intermediate complex prior to electron transfer. [(H₂O)₂(bipy)₂Ru]²⁺, the reduction product of [(H₂O)₂(bipy)₄Ru₂O]⁴⁺, plus H₃PO₃, the oxidation product of H₃PO₂, were identified in the product solutions. It is suggested that the reaction proceeds through the outer sphere pathway. A mechanism for the reaction is proposed.     

Application of Dipon, (1,4,8,11-Tetraazacyclotetradecane-4,11-bis(methylphosphonic acid) as Selective Complexing Agent for Determination of Copper(II)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid)(dipon), is selective complexing agent for copper(II) over other transition metal ions. The ligand was tested for analytical applications of copper(II) determination. Spectrophotometric determination under optimal experimental conditions (?log [H⁺]= 5.5, c _L≈ 5 × 10^?4 mol L^?1, λ= 310 nm) is valid in dynamic range (5–200)× 10^?6 mol L^?1 with detection limit 2.2 × 10^?6 mol L^?1, i.e. 0.14 μg ml^?1. Volumetric determination of copper(II) with standardized dipon solution was used for copper(II) determination at micromolar concentration level without any necessity to sequester interfering metal ions. A sharp end point of titration was detected by UV/VIS spectrophotometry. Both methods were tested on artificial and real samples (spiked mineral water, alloys) and gave satisfactory results without any systematic error. The advantage of both methods is their simplicity, rapidity and no sensitivity to the presence of other metal ions.     

Microdetermination of Molybdenum in Iron and Biological Samples by Adsorption Voltammetry

Abstract

Molybdenum has been determined by adsorption′voltammetry in a pH 2.40 buffer solution (0.005M N_aH₂PO₄-0.01M H₃PO₄). Utilizing the Strong adsorption of 12-molybdenum phosphate at a hanging mercury electrode, nanomole sensitivities are achieved. The derivative peak current is directly proportional to the concentration of molybdenum (VI) over the range of 5×10–9?2×10^?7M. The detection limit is 4×10^?9M.     

The effect of thallium ions on the gold dissolution rate in thiosulfate electrolytes

The effect of TlNO₃ additions in the concentration (c ₁) range from 5 × 10^?6 to 1 × 10^?4 M on the anodic dissolution of gold in sodium thiosulfate solutions with the concentration (c ₂) from 0.005 to 0.2 M is studied by voltammetry on the electrode surface renewed by cutting off a thin metal layer immediately in solution and also by the quartz-crystal microbalance method. For c ₂ = 0.2 M, as c ₁ increases from 5 × 10^?6 to 1 × 10^?4 M, the gold anodic dissolution rate is observed to increase from 0.02 (in the absence of TlNO₃) to 0.75 mA/cm² for c ₁ = 7.5 × 10^?5 M according to a nearly linear law. The dissolution accelerates because the effective values of the transfer coefficient and the exchange current density increase from 0.2 and 4 ??A/cm² (in the absence of TlNO₃ admixtures) to 0.47 and 35 ??A/cm² (for c ₁ = 1 × 10^?4), respectively. Experiments with the renewal of the electrode surface in the course of electrolysis suggest that the gold dissolution is catalyzed in the presence of thallium ions by the adsorption mechanism and also as the result of the mixed kinetics of their adsorption on the electrode surface.     

Effect of anions on supramolecular architecture of benzimidazole-based ionic salts

The reaction of N,N,N′,N′-tetrakis-(1H,benzimidazol-2ylmethyl) propane-1,3-diamine (L) with different inorganic acids affords salts viz., LH₄ ⁴⁺·4ClO₄ ^?·H₂O (1), LH₄ ⁴⁺·4Cl^?·2H₂O (2), LH₄ ⁴⁺·2H₂PO₄ ^?·H₇P₃O₁₂ ^2?·3H₃PO₄ (3), LH₄ ⁴⁺·4NO₃ ^? (4), and 2LH⁺·2CF₃COO^?·5H₂O (5). The X-ray crystallographic studies revealed that the proton transfer occurred from acid to the ligand. It also demonstrated that different type of hydrogen bond between protonated ligand and anions is responsible for the supramolecular framework. The colorimetric test showed color change upon the addition of acids in the solution of the ligand. The photo-physical experiments suggested the fluorescence properties of ligand in the presence of acids.     

Determination of sodium ion diffusion coefficients in sodium vanadium phosphate

Carbon-coated Na₃V₂(PO₄)₃ (NVP) was prepared by a standard sol–gel procedure. The apparent diffusion coefficients of sodium ions in the rhombohedral NVP have been determined by different techniques such as galvanostatic intermittent titration technique (GITT) and cyclic voltammetry (CV). It was found that the apparent diffusion coefficients range from 6?×?10^?13 cm² s^?1 to 2?×?10^?15 cm² s^-1. These sodium ion apparent diffusion coefficients follow a similar trend as observed for lithium ions in the closely related monoclinic modification of Li₃V₂(PO₄)₃, demonstrating a minimum at the potential where the ion extraction/insertion occurs.     

Selected rate constants for H,O, N,and Cl atoms with substrates at room temperatures

Rate constants for H + Cl₂, H + CH₃CHO, H + C₃H₄, O + C₃H₆, O + CH₃CHO, and Cl + CH₄ have been measured at room temperature by the discharge flow—resonance fluorescence technique. The results are (1.6 ± 0.1) × 10^?11, (9.8 ± 0.8) × 10 ^?14, (6.3 ± 0.4) × 10^{?13) (2.00 torr He), (3.95 ± 0.41) × 10?12, (4.9 ± 0.5) × 10|su?13} and (1.08 ± 0.07) × 10^?13, respectively, all in units of cm³ molecule^?1 s^?1. Also N atom reactions with C₂H₂, C₂H₄, C₃H₄, and C₃H₆ were studied but in no case was there an appreciable rate constant. These results are compared to previous studies.     

Iron(III) selective fluorescence probe based on perylene tetracarboxylic diimide

Responses of organic fluorophore, perylenediimide derivative N,N′-di[3-[2-(3-thienyl)ethyl]phenyl]perylene-3,4,9,10-bis-(dicarboxyimide) (PDI1) was investigated in polymer matrix of polyvinyl chloride (PVC) by emission spectrometry. Its response to Fe(III) ions was evaluated in terms of the effect of pH. The properties of time dependent response, reversibility, limit of detection, linear concentration range for the metal ion and repeatability characteristics of the sensing element also have been studied. The offered sensor exhibited remarkable fluorescence intensity quenching at pH 6.0 in the concentration range of 1 × 10^?6 to 2.5 × 10^?3 M Fe(III) ions. The reproducibility of the sensor membrane was investigated by alternately changing the solution between 1 × 10^?4 M Fe(III) in Na₂HPO₄ (4 × 10^?2 M) and NaH₂PO₄ buffer (2 × 10^?3 M).