Vibrational spectra and normal coordinate calculations for trimethylselenonium-d0 and -d9 ions and dimethyl selenide-d0, -d6

The i.r. (4000-30 cm⁻¹) and Raman (4000-0 cm⁻¹) spectra of trimethylselenonium iodide and dimethyl selenide have been obtained, together with those of their deuterated analogues. All the active fundamentals of the trimethylselenonium ion have been assigned, assuming C_3ν molecular symmetry. Normal coordinate calculations have been carried out for the trimethyl-selenonium ion and dimethyl selenide and the SeC force constants of both the compounds are compared, including those of other corresponding chalcogenides.     

Magnetic double resonance studies of trimethyltin chalcogenides

NMR parameters for bis(trimethyltin) oxide, sulphide, selenide and telluride have been measured by ¹H{¹³C}, ¹H{⁷⁷Se}, ¹H{¹¹⁹Sn}, ¹H{¹²⁵Te}, and ¹H{¹¹⁷Sn} double resonance. Theories of ¹¹⁹Sn magnetic shielding and one-bond coupling constants are summarised and discussed in terms of the measured parameters. It is concluded that theoretical approximate expressions often used to estimate these parameters are inadequate when the tin atom is bound to selenium or tellurium.     

Reactions of triads Se8KOHDMSO,Se8KOHDMSO,TeKOHHMPA with acetylenes

A new general approach to anionic transformations of acetylenes using superbasic media has been developed. It allows series of new reactions which are not undergone by acetylene under conventional conditions. The triads Se₈KOHdimethylsulfoxide (DMSO), Se₈KOHDMSO, TeKOH-hexamethyl-phosphorictriamide (HMPA) are proposed as new effective reagents for the preparation of unsaturated compounds of sulfur, selenium and tellerium. A series of reactions of acetylene with sulfur, selenium and tellerium proceeding in DMSO or HMPA in the presence of alkali and water at 80–120° leading to divinyl sulfide, divinyl selenide and divinyl teluride in 25–80% yields have been found. Thiophen, di-1-(1,3-butadienyl) sulfide, 1-vinyl-2-thiabicyclo[3.2.0]hept-3-ene, and dihydrothiophen have been obtained by the reaction of vinylacetate with sulfur. The reaction of vinylacetylene with selenium affords selenophen, di-1-(1,3-butadienyl) selenide, 1-vinyl-2-selenabicyclo[3.2.0]hept-3-ene, methyl (1-(1,3-butadienyl) sulfide, and methylthiomethyl 1-(1,4-butadienyl) selenide, vinyl 1-(1,3-butadienyl) sulfide, and methylthiomethyl 1-(1,3-butadienyl) selenide (the latter two with DMSO participation). The reaction of vinylacetate with tellerium gives mainly di-1-(1,3-butadienyl) telluride. A series of reactions between DMSO and selenium leading to dimethyl sulfide, dimethyl sulfoselenide, and methylthiomethyl selenide have been observed.     

Interface characterization of nickel contacts to bulk bismuth tellurium selenide

Transmission electron microscopy (TEM) characterization of nickel contacts to bulk bismuth tellurium selenide [Bi₂(Te,Se)₃] is reported. Samples were prepared in a dual column focused ion beam/scanning electron microscope (FIB/SEM) system using a lift‐out technique, with ion beam energy and exposure times carefully optimized to minimize sample damage. Diffusion of Ni into Bi₂(Te,Se)₃ was observed and the formation of a nickel telluride (NiTe) interfacial region confirmed after heat treatment at 200 °C. Selected area diffraction patterns provided evidence of a modified bismuth telluride–like structure at the interface, identified by analytical electron microscopy to be composed of Ni and Bi₂(Te,Se)₃. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterisation and structural aspects of some symmetrical organotellurium halides based on Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride

Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (2) has been synthesised in good yield by reacting 1-(2-chloroethyl)-3,5-dimethylpyrazole with in situ prepared sodium telluride, Na₂Te in an aqueous solution. A number of new organotellurium halides from bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride have been synthesised by using different halogenating reagents. Reaction of 2 with bromine gave bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5a) in addition to unexpected product bis(2-(4-bromo-3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5b). All compounds were characterized by different spectroscopic techniques viz., ¹H, ¹³C, ¹²⁵Te NMR, Mass spectroscopy, IR and CHN analysis. EDXRF studies have also been employed to confirm the identity of 5a and 5b. Thermal gravimetric analysis of bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) chloride (4) and bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) iodide (5c) reveals the thermal stability of these molecules above 100°C. The X-ray studies of 5c shows trigonal bipyramidal geometry around tellurium atom and intermolecular secondary interaction viz., C-H π stacking between H23A and C22 showing a supramolecular packing between two molecules.     

Synthesis and characterization of some α-naphthyl selenium/tellurium derivatives: X-ray crystal structure of benzyl-1-naphthyl selenide and diphenylmethyl-1-naphthyl selenide

A large number of α-naphthyl selenium and tellurium compounds (1-14) have been prepared through two different methods. The first method involves the alkylation of sodium 1-naphthylselenolate/tellurolate, generated in situ using hydrazine hydrate as reducing agent while the second method involves the reaction of in situ generated α-naphthylseleno/telluromagnesium bromide with an appropriate electrophile. The synthesized alkyl-1-naphthyl selenides/tellurides and some α,ω-bis(1-naphthylseleno)alkanes have been characterized with the help of elemental analysis and using various spectroscopic techniques viz., NMR (¹H, ¹³C, ⁷⁷Se and ¹²⁵Te), IR, UV/vis spectroscopy and mass spectrometry (only in few representative cases). Interpretation of ¹H, ¹³C NMR spectra and assignment of individual resonances for tris(1-naphthylseleno)methane have been done with the help of [¹H-¹H] and [¹H-¹³C] correlation spectroscopy (COSY). X-ray crystallographic results and molecular geometry of benzyl-1-naphthyl selenide, 2 and diphenylmethyl-1-naphthyl selenide, 3 have also been illustrated.     

Synthesis and some transformations of dimethyl anabasylethynephosphonate

A new phosphorylated ynamine, dimethyl anabasylethynephosphonate, was synthesized by reaction of dimethyl chloroacetylenephosphonate with anabasine. Anabasylethynephosphonate obtained was shown to react under mild conditions with primary aromatic amines like p-chloroaniline, p-anisidine, and p-aminoacetophenone, whose pK _b values are in the range of 9–13, to form new asymmetrical phosphorylated acetamidines in high yields. Structure of the compounds obtained was proved by ¹H, ¹³C, and ³¹P NMR spectroscopy.     

Low-temperature 1H, 13C, 77Se,and 125Te NMR studies on the apical-apical ligand exchange via the hypervalent tellurium and selenium ate complexes [10-M-3(C3); M = Se,Te] in the reactions of diaryl tellurides and selenides with aryllithium reagents

Pentafluorophenyl phenyl telluride ( 1 ) and 3,5-dichloro-2,4,6-trifluorophenyl phenyl telluride ( 2 ) react with pentafluorophenyllithium or 3,5-dichloro-2,4,6-trifluorophenyllithium in THF at low temperatures to form the corresponding tellurium ate complexes ( A ) and ( B ) as sole intermediates in the ligand exchange on the hypervalent tellurium atom. The corresponding selenides ( 3 ) and ( 4 ) also react with identical aryllithium reagents in THF to form the discrete intermediates, selenium ate complexes ( C ) and ( D ), in the exchange reactions. In these ligand exchange reactions of tellurides and selenides, electron-withdrawing ligands occupy the apical positions and the exchange takes place between these apical-oriented groups. The low-temperature ¹H, ¹³C, ⁷⁷Se, and ¹²⁵Te NMR spectroscopic techniques are effective methods for detection of unstable tellurium and selenium ate complexes.     

13C?C13 coupling constants in dimethyl phthalate and phthalic anhydride. Determination of signs—III

Relative signs of ¹³C? ¹³C coupling constants between ring carbons and carbonyl carbons in dimethyl phthalate and phthalic anhydride, ¹³C-labelled in both carbonyl groups, have been determined. The two-and three-bond coupling constants are shown to be positive, whereas four-bond coupling constants are negative. Substituent effects on carbon-carbon couplings due to a carboxyl group have been determined and effects of 5-membered ring formation in phthalic anhydride have been observed.     

Regioselective reactions of sulfur, selenium and tellurium chlorides with allyl trimethyl silane

Electrophilic addition of SCl₂, SeCl₂ and SeCl₄ to 2 equivalents of allyl trimethyl silane proceeds regioselectively to give bis[2-chloro-3-(trimethylsilyl)propyl] sulfide, selenide and selenium dichloride, respectively. The reaction with TeCl₄ affords only diallyl tellurium dichloride. The structures of the compounds were confirmed by ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR techniques.     

Preparation and properties of dimethyl phosphonomethyl methylsiloxane dimethylsiloxane copolymers

Dimethyl phosphonomethylheptamethylcyclotetrasiloxane (II) and 1, 3-bis(dimethyl phosphonomethyl)tetramethyldisiloxane (III) have been prepared by Arbuzov reaction of trimethyl phosphite with bromomethylheptamethylcyclotetrasiloxane (I) and 1, 3-bis(bromomethyl)tetramethyldisiloxane, respectively. Dimethyl phosphonomethylmethylsiloxane dimethylsiloxane copolymers have been prepared by acid-catalyzed ring-opening polymerization of II with hexamethyldisiloxane (MM) as an end-capping reagent and by reaction of II with III as an end-capping reagent. Dimethylsiloxane polymers with dimethyl phosphonomethyldimethylsiloxy end groups have been prepared by acid-catalyzed polymerization of octamethylcyclotetrasiloxane (D₄) and III. Under these conditions hydrolysis of the dimethyl phosphonate ester groups was a problem. On the other hand Arbuzov reaction of trimethyl phosphite with bromomethylmethylsiloxane dimethylsiloxane copolymer gave a dimethyl phosphonomethylmethylsiloxane dimethylsiloxane copolymer with uniform properties. These polymers have been characterized by ¹H-, ¹³C-, ²⁹Si-, and ³¹P-NMR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography (GPC) and their thermal stability measured by TGA.     

Study of the reactions of dimethyl hydrogen phosphonate with urethane and acetanilide

In this article, a new reactivity of dimethyl hydrogen phosphonate is described. It was established that the reaction between dimethyl hydrogen phosphonate and urethane encompasses two simultaneous processes: an exchange reaction between the methoxy groups of the phosphonate and urethane groups and alkylation of the urethane. The reaction of dimethyl hydrogen phosphonate with acetanilide represents an alkylation of the amido group. The structure of the resulting products was studied by means of ¹H, ³¹P, and ¹³C NMR spectroscopy. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:205–208, 2000     

Novel route to the synthesis of chalcogenolanes, chalcogenanes, and 1,2-dichalcogenaepanes*

The saturated heterocyclic compounds C₄H₈Y, C₅H₁₀Y, and C₅H₁₀Y₂ (Y = Se or Te) have been prepared by the reaction of 1,4-dibromobutane or 1,5-dibromopentane with potassium chalcogenides. The novelty of the route consists of the use of the hydrazine hydrate–KOH system for the reductive generation of potassium selenide, telluride, diselenide or ditelluride from elemental chalcogens.     

Synthesis of new functionalized organoselenium compounds by heterocyclization of selenium dihalides with pent-4-en-1-ol

The reaction of selenium dihalides with pent-4-en-1-ol has been carried out for the first time. Efficient procedures for the synthesis of previously unknown bis(tetrahydrofuran-2-ylmethyl) selenide, dihalobis( tetrahydrofuran-2-ylmethyl)-λ⁴-selanes, and bis(tetrahydrofuran-2-ylmethyl) selenoxide have been developed on the basis of this reaction. The product structures have been studied by ¹H, ¹³C, and ⁷⁷Se NMR. Bis(tetrahydrofuran-2-ylmethyl) selenide and dihalobis(tetrahydrofuran-2-ylmethyl)-λ⁴-selanes represent equimolar mixtures of two diastereoisomers which display different signals in the ¹³C and ⁷⁷Se NMR spectra. The oxidation of bis(tetrahydrofuran-2-ylmethyl) selenide with sodium periodate in methanol leads to the corresponding selenoxide consisting of 4 diastereoisomers.     

The carbon-13 NMR spectrum of dimethoxybilirubin dimethyl ester

The ¹³C NMR spectrum of dimethoxybilirubin dimethyl ester (1) is reported. Methoxyvinylneoxanthobilirubinic acid methyl ester, a compound containing one endo-vinylpyrromethene unit, was prepared and used in the assignment of the spectrum of 1.     

The unusual paramagnetic mixed-metal carbonyl chalcogenide clusters: [E(2)Cr(2)Fe(CO)(10)](2-) (E = Te,Se)

The rare examples of electron-rich mixed-metal carbonyl telluride and selenide clusters [E(2)Cr(2)Fe(CO)(10)](2-) (E = Te, Se) have been demonstrated. These two novel carbonyl complexes exhibit the unusual paramagnetic behavior.     

Thermolysis of dimethyl sulfoxide

The thermal decomposition of dimethyl sulfoxide at small extent of reaction has been studied at temperatures of 297-350°C and pressures of 10–400 Torr. The major products CH₄, C₂H₄, and SO₂ were shown to follow first-order kinetics. The activation energies for production of each was about 48 kcal·mole^?1. A chain mechanism has been postulated in the light of the results of isotopic substitution experiments.     

The reaction of hydrogen chloride with bis (p-ethoxyphenyl)telluride,a possible route to pure tellurium

The reaction of hydrogen chloride with bis(p-ethoxyphenyl)telluride is investigated and shown to give essentially phenetole (C₆H₅COEt), tellurium, and bis(p-ethoxyphenyl)tellurium dichloride. Spectroscopic methods (UV–visible, ¹²⁵Te NMR) show that some bis(p-ethoxyphenyl)ditelluride is produced. This is believed to arise from a side reaction of organic telluride with an intermediate organyltellurenyl chloride which is considered to arise from initial proton attack at the Te–C bond of the telluride. The ditelluride reacts with HCl to deposit 80% of its tellurium content as the element; phenetole is the other major product. Use of a spin-trap reagent gave no evidence of radical intermediates. An attempt to develop a reaction sequence to prepare high-purity tellurium is described. Although a purity of 99.985% could be achieved, overall yields are not economic, unless very highpurity tellurium is required. The method described is, however, very effective for the removal of traces of tin, lead, arsenic and antimony and can significantly reduce the copper, iron and selenium content; for example, one treatment of an alloy (Te, 75%; Se, 25%) gave a sample of tellurium containing 40 ppm selenium.     

New CF3 Substituted Phosphorus‐Tellurium Heterocycles

The reaction of trifluormethyl dichlorophosphine (CF₃PCl₂) with sodium telluride Na₂Te or bis(trimethylsilyl) telluride (Me₃Si)₂Te results in the formation of four new phosphorus tellurium heterocycles ( 1–4 ) with the electron withdrawing CF₃ substituent bonded to phosphorus. The telluratriphosphetane (CF₃P)₃Te ( 1 ), telluratetraphospholane (CF₃P)₄Te ( 2 ), telluradiphosphirane (CF₃P)₂Te ( 3 ) and ditelluratriphospholane (CF₃P)₃Te₂ ( 4 ) are characterized by multinuclear (³¹P, ¹⁹F and ¹²⁵Te) NMR spectroscopy. A full analysis of the ¹⁹F NMR spectrum of telluratriphosphetane (CF₃P)₃Te is presented. The new heterocycles are remarkably stable in solution and eliminate only slowly tellurium to form cyclophosphines (CF₃P)_n (n = 3–5).     

The ESR spectrum and structure of the dimer radical cation of dimethyl selenide (Me2Se-SeMe+2) in a γ-irradiated single crystal

The dimer radical cation of dimethyl selenide has been identified in a γ-irradiated single crystal of the parent compound, its main (^evenSe) ESR spectrum showing hyperfine coupling to twelve equivalent hydrogens. Also, the relative intensity of the naturally abundant⁷⁷Se satellite spectrum is in agreement with a hyperfine interaction involving two anisotropically equivalent selenium atoms. The principal values and direction cosines of the⁷⁷Se hyperfine andg tensors have been determined and are shown to be satisfactorily interpreted in terms of a centrosymmetric structure, the unpaired electron occupying an antibonding (σ^*) orbital built almost entirely from the p_σ orbitals of the two selenium atoms. Analysis of theg tensor components indicates that the CSeC planes are perpendicular to the direction of the Se-Se bond. It is also shown that the isotropic¹H splitting andg factor obtained previously from solution ESR studies of the dimethyl sulphide dimer cation are consistent with the structure advanced here for the selenium dimer. The results seem to rule out the possibility of any significant d orbital participation in the bonding.