A europium(III) complex as an efficient singlet oxygen luminescence probe

A new europium(III) complex, [4'-(10-methyl-9-anthryl)-2,2':6',2"-terpyridine-6,6"-diyl]bis(methylenenitrilo) tetrakis(acetate)-Eu(3+), was designed and synthesized as a highly sensitive and selective time-gated luminescence probe for singlet oxygen ((1)O2). The new probe is highly water soluble with a large stability constant of approximately 10(21) and a wide pH available range (pH 3-10), and can specifically react with (1)O2 to form its endoperoxide (EP-MTTA-Eu(3+)) with a high reaction rate constant at 10(10) M(-1) s(-1), accompanied by the remarkable increases of luminescence quantum yield from 0.90% to 13.8% and lifetime from 0.80 to 1.29 ms, respectively. The wide applicability of the probe was demonstrated by detection of (1)O2 generated from a MoO(4)(2-)/H(2)O2 system, a photosensitization system of 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin tetra(p-toluenesulfonate) (TMPyP), and a horseradish peroxidase catalyzed aerobic oxidation system of indole-3-acetic acid (IAA). In addition, it was found that the new probe could be easily transferred into living HeLa cells by incubation with TMPyP. A time-gated luminescence imaging technique that can fully eliminate the short-lived background fluorescence from TMPyP and cell components has been successfully developed for monitoring the time-dependent generation of (1)O2 in living cells.     

Rose Bengal derivatives as singlet oxygen sensitizers

Derivatives of Rose Bengal are reported and the relationships between subtle structural and dramatic changes in photophysical properties pointed out.     

Visible-light harvesting iridium complexes as singlet oxygen sensitizers for photooxidation of 1,5-dihydroxynaphthalene

Visible-light harvesting cyclometalated Ir(III) complexes were used as (1)O(2) sensitizers for the photooxidation of 1,5-dihydroxynaphthalene (DHN) and substantially improved photooxidation capability was observed compared to the conventional Ir(III) complex sensitizers that show no visible light-harvesting capabilities.     

Theoretical investigation on quinoline-based platinum (II) complexes as efficient singlet oxygen photosensitizers in photodynamic therapy

Geometry optimizations of the quinoline-based platinum (II) complexes (1-R, 2-R) and their related calculations on excited state energies, electronic absorption spectra and orbital populations have been carried out by the hybrid density functional theory (DFT) and its time-dependent approach (TD-DFT). The solvent effects on excitation energies are taken into account using the conductor-like polarizable continuum model (C-PCM). The red-shifted level of absorption bands, energy gaps between the singlet ground state (S₁) and the first triplet excited state (T₁) for each examined complex have been elaborated thoroughly as well. We find that the quinoline-8-thoil (ligand 2) induces much more significant red-shifted level than 8-hydroxyquinoline (ligand 1), and singlet-triplet splitting energy gaps of all examined complexes are bigger than threshold energy to yield singlet oxygen. It is revealed that the electronic red-shifted absorption bands originate from metal-to-ligand charge transfer (MLCT) transitions, and also shown that the quinoline-based Pt (II) complexes with strong donor groups could be considered as potential candidates for unearthing of novel photosensitizers in photodynamic therapy (PDT).     

Photosensitized generation of singlet oxygen from rhenium(I) and iridium(III) complexes

Photophysical properties in dilute acetonitrile solution are reported for a number of iridium(III) and rhenium(I) complexes. The nature of the lowest excited state of the complexes under investigation is either metal-to-ligand charge transfer ((3)MLCT) or a ligand centred ((3)LC) state. Rate constants, k(q), for quenching of the lowest excited states by molecular oxygen are in the range 1.5 x 10(8) to 1.4 x 10(10) M(-1) s(-1). Efficiency of singlet oxygen production, f(Delta)(T), following oxygen quenching of the lowest excited states of these complexes, are in the range of 0.27-1.00. The rate constants and the efficiency of singlet oxygen formation are quantitatively reproduced by a model that assumes the competition between a non-charge transfer (nCT) and a CT deactivation channel. The balance between CT and nCT deactivation channels, which is described by the relative contribution p(CT) of CT induced deactivation, is discussed. The kinetic model is found to be successfully applied in the case of quenching of the excited triplet states of coordination compounds by oxygen in acetonitrile, as was proposed for the quenching of pi-pi* triplet states by oxygen.     

Bis-cyclometalated iridium(III) complexes bearing ancillary guanidinate ligands. Synthesis, structure, and highly efficient electroluminescence

We report the synthesis, structure, and photophysical and electroluminescent (EL) properties of a series of heteroleptic bis(pyridylphenyl)iridium(III) complexes with various ancillary guanidinate ligands. The reaction of the bis(pyridylphenyl)iridium(III) chloride [(ppy)(2)Ir(μ-Cl)](2) with the lithium salt of various guanidine ligands Li{(N(i)Pr)(2)C(NR(1)R(2))} at 80 °C gave in 60-80% yield the corresponding heteroleptic bis(pyridylphenyl)/guanidinate iridium(III) complexes having a general formula of [(ppy)(2)Ir{(N(i)Pr)(2)C(NR(1)R(2))}], where NR(1)R(2) = NPh(2) (1), N(C(6)H(4)(t)Bu-4)(2) (2), carbazolyl (3), 3,6-bis(tert-butyl)carbazolyl (4), N(C(6)H(4))(2)S (5), N(C(6)H(4))(2)O (6), indolyl (7), NEt(2) (8), N(i)Pr(2) (9), N(i)Bu(2) (10), and N(SiMe(3))(2) (11). These heteroleptic cyclometalated (C^N) iridium(III) complexes showed intense absorption bands in the UV region assignable to π-π* transitions and weaker metal-to-ligand charge-transfer transitions extending to the visible region. These complexes also showed intense emissions at room temperature. Their photoluminescence spectra were influenced to some extent by the ancillary guanidinate ligands, giving λ(max) values in the range of 528-560 nm with quantum yields (Φ) of 0.16-0.37 and lifetimes of 0.61-1.43 μs. Organic light-emitting diodes were fabricated by the use of these complexes as dopants in various concentrations (5-100%) in a N,N'-dicarbazolylbiphenyl host. High current efficiency (η(c); up to 137.4 cd/A) and power efficiency (η(p); up to 45.7 lm/W) were observed under appropriate conditions. Their high EL efficiency may result from efficient trapping and radiative relaxation of the excitons formed in the EL process. Because of the steric hindrance of the guanidinate ligands, no significant intermolecular interaction was observed in these complexes, thus leading to the reduction of self-quenching and triplet-triplet annihilation at high currents. The EL emission color could be changed in the range of green to yellow by choosing appropriate guanidinate ligands.     

Iridium(III) complexes as polymer bound oxygen sensors

New luminescent oxygen sensors have been prepared by covalent attachment of iridium complex luminophores to a silicone polymer. The oxygen sensor properties of these novel materials were compared to related sensors in which the luminophore is dispersed within the polymer matrix. Covalently bound luminophore materials showed increased sensitivity to oxygen over dispersions in pure silicone polymer as well as in blends with polystyrene, which was added to improve the mechanical properties of the material.     

Reaction of singlet oxygen with Ir(I) and Rh(I) thiolato complexes: oxidative addition vs. S-oxidation

Singlet oxygen reacts with Ir(I) and Rh(I) thiolato complexes to form the corresponding Ir(III) and Rh(III) peroxo thiolato complexes which do not undergo intramolecular oxidation of the thiolate moiety.     

Strongly photoluminescent Eu(III) tetrazolate ternary complexes with phosphine oxides as powerful sensitizers

The Eu(III) cation forms electrically neutral photoluminescent complex with 5-(2-pyridyl-1-oxide)tetrazolate (PTO) anion. Although the photoluminescence properties of such tertiary Eu(III) and Tb(III) complexes were not as high (13 and 31% photoluminescence quantum yield, respectively) as reported for other diketonate lanthanide complexes probably because of high number of nitrogen atoms involved in PTO which leads to attachment of water molecules, reducing the luminescence quantum yield with vibrational and rotational quenching. Here, we report the removal of quencher molecules from the coordination sphere of tris–europium tetrazolate oxide complex by replacing them with various phosphine oxides which leads to improved photoluminescence quantum yield for the complexes by acting as auxiliary co-ligands with that of the main antenna 5-(2-pyridyl-1-oxide)tetrazolate. The coordination sphere in these complexes can be complemented by aromatic phosphine oxides to provide highly photoluminescent Eu(III) complexes. The highest quantum yield was 38% in 3 [Eu(PTO)₃·DPEPO](H₂O)₅ containing bis(2-(diphenylphosphino)phenyl) ether oxide (DPEPO) as compared to tris–europium complex with 5-(2-pyridyl-1-oxide)tetrazolate.     

Formation and reactivity of Ir(III) hydroxycarbonyl complexes

Kinetic studies show that the reaction of [TpIr(CO)2] (1, Tp = hydrotris(pyrazolyl)borate) with water to give [TpIr(CO2H)(CO)H] (2) is second order (k = 1.65 x 10(-4) dm(3) mol(-1) s(-1), 25 degrees C, MeCN) with activation parameters DeltaH++= 46+/-2 kJ mol(-1) and DeltaS++ = -162+/-5 J K(-1) mol(-1). A kinetic isotope effect of k(H2O)/k(D2O) = 1.40 at 20 degrees C indicates that O-H/D bond cleavage is involved in the rate-determining step. Despite being more electron rich than 1, [Tp*Ir(CO)2] (1*, Tp* = hydrotris(3,5-dimethylpyrazolyl)borate) reacts rapidly with adventitious water to give [Tp*Ir(CO2H)(CO)H] (2*). A proposed mechanism consistent with the relative reactivity of 1 and 1* involves initial protonation of Ir(I) followed by nucleophilic attack on a carbonyl ligand. An X-ray crystal structure of 2* shows dimer formation via pairwise H-bonding interactions of hydroxycarbonyl ligands (r(O...O) 2.65 A). Complex 2* is thermally stable but (like 2) is amphoteric, undergoing dehydroxylation with acid to give [Tp*Ir(CO)2H]+ (3*) and decarboxylation with OH- to give [TpIr(CO)H2] (4*). Complex 2 undergoes thermal decarboxylation above ca. 50 degrees C to give [TpIr(CO)H2] (4) in a first-order process with activation parameters DeltaH++ = 115+/-4 kJ mol(-1) and DeltaS++ = 60+/-10 J K(-1) mol(-1).     

Luminescence mechanochromism in cyclometallated Ir(III) complexes containing picolylamine

The synthesis, crystal structure and luminescence properties of three cyclometalated Ir(III) complexes of general formula [(ppy)(2)Ir(pam)]X, where X = Cl(-) (1), PF(6)(-) (2), ClO(4)(-)(3), and pam = 2-picolylamine, are described. While 2 and 3 crystallize in a unique form, two pseudo-polymorphs, a solvated (1a) and a non-solvated (1b) species, have been observed for compound 1. 1a crystallizes in the monoclinic centrosymmetric space group P2(1)/c. On the contrary, 1b, 2 and 3 crystallize in the non-centrosymmetric space group P2(1)2(1)2(1) (1b) and Pca2(1) (2 and 3), respectively. All the crystalline supramolecular materials have been fully photophysically characterized. While 1 shows a bright blue-green emission in both solution and solvated crystalline state 1a, crystals of 1b, 2 and 3 show a significantly red shifted emission with respect to solution. Unexpectedly, and differently from 1a, mechanical stimuli-responsive colour and luminescence changes have been observed for 1b, 2 and 3. Upon mechanical grinding the colour of the crystalline solids changes from orange to yellow while the emission energy is partially (2 and 3) or completely (1b) converted from orange to green. The grinding-triggered colour and luminescence changes have been attributed to a crystal-to-amorphous phase conversion for all crystalline solids.     

Ir(III) complexes of diamine ligands for asymmetric ketone hydrogenation

The use of a combination of IrCl₃ with a series of ligands derived from the C2-symmetric diamine diphenylethanediamine (DPEN) forms a catalyst capable of the asymmetric hydrogenation of ketones in up to 85% ee.     

2-mercapto-5-methyl-1,3,4-thiadiazole as a ligand in Ru(III), Rh(III), Os(III) and Ir(III) trichloride complexes

Some 2-mercapto-5-methyl-1,3,4-thiadiazole complexes of Rh(III), Ir(III), Ru(III) and Os(III) have been prepared and characterized by chemical-analysis, conductometric, room-temperature magnetic-moment, electronic, IR, EPR and thermogravimetric measurements. From the magnetic properties it was derived that the above ligand forms low-spin complexes with all the metal ions. The position and multiplicity of the metal-halogen stretching modes in the far-IR region have been investigated. The wavelengths of the principal electronic absorption peaks have been accounted for in terms of the crystal field theory and the various parameters have been calculated.     

Photophysical and electrochemical properties of heteroleptic tris-cyclometallated Ir(III) complexes

Some new heteroleptic tris-cyclometallated iridium(III) complexes have been synthesized and fully characterized. Among these iridium(III) complexes, bis(1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (3) and bis(3-methyl-1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (4) show excellent quantum yields at room temperature, the electron density being perturbed by introducing the pyridyltetrazole ligand, making k_r > k_nr. This destroys the concept of phenylpyrazole based iridium complexes.     

Two-photon photosensitized production of singlet oxygen: sensitizers with phenylene-ethynylene-based chromophores

[reaction: see text] Singlet molecular oxygen (a(1)Delta(g)) has been produced and optically monitored in time-resolved experiments upon nonlinear two-photon excitation of photosensitizers that contain triple bonds as an integral part of the chromophore. Both experiments and ab initio computations indicate that the photophysical properties of alkyne-containing sensitizers are similar to those in the alkene-containing analogues. Most importantly, however, in comparison to the analogue that contains double bonds, the sensitizer containing alkyne moieties is more stable against singlet-oxygen-mediated photooxygenation reactions. This increased stability can be advantageous, particularly with respect to two-photon singlet oxygen imaging experiments in which data are collected over comparatively long time periods.     

Synthesis and characterization of Ru(III), Rh(III), Pt(IV) and Ir(III) thiosemicarbazone complexes

Ru(III), Rh(III), Pt(IV) and Ir(III) complexes of 2-furfural thiosemicarbazone as ligand have been synthesised. These complexes have the composition [M(ligand)₂X₂]X (M = Ru(III) Rh(III) and Ir(III) X = Cl and Br) and [Pt(ligand)₂ X₂] X₂ (X = Cl, Br and 1/2SO₄). The deprotonated ligand forms the complexes of the formulae M(ligand-H)₃ and Pt(ligand-H)₃Cl. All these complexes have been characterized by elemental analysis, magnetic measurements, electronic and infrared spectral studies. All the complexes are six-coordinate octahedral.     

Half‐sandwich Ir (III) and Rh (III) complexes as catalysts for water oxidation with double‐site

A series of neutral binuclear iridium and rhodium complexes were synthesized based on bis‐imine ligands under mild conditions. These half‐sandwich late transition metal complexes were isolated in good yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, HR‐MS, and FT‐IR spectroscopies, and the solid state structure of complexes 1 and 2 were further confirmed by single‐crystal X‐ray diffraction. Cyclic voltammetry (CV) characterization indicated that the complex 1 has the best catalyst for water oxidation process with TOF of 0.8 s^?1 at low overpotential of 0.325 V in methanol‐phosphate buffer. The proposed double‐site water oxidation mechanism had been also speculated .     

Heteroleptic half-sandwich Ru(II), Rh(III) and Ir(III) complexes based on 5-ferrocenyldipyrromethene

The synthesis and characterization of heteroleptic complexes with the formulations [(η⁶-arene)RuCl(fcdpm)] (η⁶-arene = C₆H₆, C₁₀H₁₄) and [(η⁵-C₅Me₅)MCl(fcdpm)] (M = Rh, Ir; fcdpm = 5-ferrocenyldipyrromethene) have been reported. All the complexes have been characterized by elemental analyses, IR, ¹H NMR and electronic spectral studies. Structures of [(η⁶-C₆H₆)RuCl(fcdpm)] and [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] have been determined crystallographically. Chelating monoanionic linkage of fcdpm to the respective metal centres has been supported by spectral and structural studies. Further, reactivity of the representative complex [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] with ammonium thiocyanate (NH₄SCN) and triphenylphosphine (PPh₃) have been examined.     

Cyclometalated Ir(III) complexes containing N-aryl picolinamide ancillary ligands

The reaction of the cyclometalated chloro-bridged iridium(III) dimer, [(ppy)₂ Ir(μ-Cl)]₂ (ppy - 2-phenyl pyridine) with N-aryl picolinamides (LH, LH-NO₂, LH-CH₃, LH-l, LH-F) resulted in the formation of neutral heteroleptic complexes [Ir(ppy)₂L] (1), [Ir(ppy)₂L-NO₂](2), [Ir(ppy)₂L-CH₃](3), [Ir(ppy)₂L-Cl](4) and [Ir(ppy)₂L-F] (5). These complexes contain a six-coordinate iridium with a 2C, 4N coordination environment. The N-aryl picolinamide ligands are deprotonated during complexation and the resulting amidates bind to iridium in a chelating manner (N, N). Optical spectroscopic studies revealed that the complexes 1-5 exhibited intense π→π^∗ absorptions in the ultraviolet region. In addition low energy transitions due to ¹MLCT, ¹LLCT and ³MLCT are also seen. The emission spectra of 1-5, upon excitation at 450 nm, show a single emission with a λ_max around 513 nm. The lifetimes of this emission are in between 7.4 and 9.6 μs while the quantum yields are quite high and range from 0.2 to 0.5. Based on density functional theory (DFT) calculations on 1 and 3, the three highest occupied orbitals are composed of ligand π orbitals mixed with Ir-d orbitals while the three lowest unoccupied orbitals are mostly π orbitals of the ligands. From the time dependent DFT calculations it is revealed that the lowest energy electronic singlet and triplet excitations are a mixture of MLCT and LLCT.     

Synthesis and characterization of water-soluble phenylene-vinylene-based singlet oxygen sensitizers for two-photon excitation

[reaction: see text] The synthesis and characterization of water-soluble singlet oxygen sensitizers with a phenylene-vinylene motif is presented. The principal motivation for this study was to better understand specific features of a water-soluble molecule that influence the photosensitized production of singlet oxygen upon nonlinear, two-photon excitation of that molecule. To achieve water solubility, sensitizers were synthesized with ionic as well as nonionic substituents. In the ionic approach, salts of N-methylated pyridine, benzothiazole, and 1-methyl-piperazine moieties were used, as were aryl-substituted sulfonic acid moieties. In the nonionic approach, aryl-substituted triethylene glycol moieties were used. Selected photophysical properties of the compounds synthesized were determined, including singlet oxygen quantum yields. Of the molecules examined, the most efficient singlet oxygen sensitizers had triethylene glycol units as the functional group that imparted water solubility. Molecules containing the ionic moieties did not make singlet oxygen in appreciable yield nor did they efficiently fluoresce. Rather, for these latter molecules, rapid charge-transfer-mediated non-radiative processes appear to dominate excited state deactivation.