Low loss liquid crystals for infrared applications

Seven fluorinated and chlorinated terphenyl compounds intended for mid-wave infrared (MWIR) applications are synthesised and two eutectic mixtures formulated, and their physical properties evaluated. In addition to low absorption, some desirable properties for MWIR applications include wide nematic range, high birefringence, large dielectric anisotropy and low viscosity. The fluorinated terphenyl mixture exhibits a relatively low absorption in the vicinities of λ ~ 3 μm, but a fairly strong overtone appears in the 4–5 μm region. To suppress these overtone absorptions, short-chain chlorinated terphenyl compounds are proven to be useful.     

Development of ferroelectric liquid crystals with low birefringence

We propose an approach for development of ferroelectric liquid crystals (FLC) with low birefringence Δn. Two basic principles have been used to get lowering of Δn: selection of molecules with short chains of conjugation as components for achiral matrix and averaging of local refractive indices by FLC helical structure. FLC mixtures with low birefringence (0.07 < Δn < 0.10 at wavelength 589.3 nm of sodium line) were elaborated and investigated. They consist of an achiral matrix including both nematic and smectic liquid crystal components and of phenylpyrimidine derivatives as chiral dopants. The materials developed can be used for all basic electro-optical FLC modes such as surface stabilised FLC (SSFLC), deformed helix ferroelectrics (DHF) and electrically suppressed helix (ESH). The mixtures developed allow to reduce the FLC cells chromatic retardance variation due to the weaker birefringence dispersion as compared with the known FLC materials to date.     

Thermotropic liquid crystals based on ferrocenylbiphenyl and ferrocenylterphenyl

4′‐Ferrocenyl‐1,1′‐biphenyl‐4‐yl 4‐alkoxybenzoates Fc–(C₆H₄)₂–OC(O)–C₆H₄–O–C _n H_2n+1 (n = 8, 10, 12) (3a–c), representing a new class of ferrocene‐containing thermotropic mesogens with nematogenic properties, were prepared. Two approaches were used for the construction of these mesogens: (i) reaction of 4′‐ferrocenyl‐1,1′‐biphenyl‐4‐ol with 4‐alkoxybenzoylchlorides, and (ii) crosscoupling of tris(4‐ferrocenylphenyl)boroxine with the corresponding halobenzenes. Crosscoupling was also applied for the synthesis of terphenyl‐containing mesogens Fc–(C₆H₄)₃–OC(O)–C₆H₄–O–C _n H_2n+1 (n = 10, 12) (6a,b) and (RC₅H₄)Fe‐[C₅H₄–(C₆H₄)₃–OC(O)–C₆H₄–O–C₁₀H₂₁] (11a, R = Et; 11b, R = n?Bu). The latter compounds also form nematic phases. Mesogens 6a,b form mesophases with wider temperature ranges than their biphenyl‐containing counterparts 3b,c. The most pronounced mesomorphism was displayed by compounds 11a and 11b, which have mesophases in the ranges 141–253°C and 120–238°C, respectively. The purity of compounds was established by ¹H NMR spectra and elemental analysis. Mesophases were identified by polarizing optical microscopy and differential scanning calorimetry.     

Columnar liquid crystals based on amino-1,3,4-thiadiazole derivatives

Novel liquid crystal materials base on amino-thiadiazoles, specifically 5-(3,4-di-, and/or 3,4,5-tri-n-alkoxy)phenyl-2-amino-1,3,4-thiadiazoles (3a–f, n?=?10, 12, 14) and 5-(3,4-di- and/or 3,4,5-tri-n-alkoxy)phenyl-2-(4-amino)phenyl-1,3,4-thiadiazoles (6a–f, n?=?10, 12, 14) were synthesised. The mesomorphic properties of these compounds were studied by differential scanning calorimetry and polarising optical microscopy. All the compounds in series 3a–f and series 6a–f display an enantiotropic columnar phase. The mesomorphic properties were found to be dependent on the number of the side alkoxy chains, and on the length of the rigid core, and on the position of the thiadiazole ring. The best results were obtained with compounds of series 3a–f.     

Thermal tuning band gap in cholesteric liquid crystals

The phase of a liquid crystal (LC) changing from a nematic phase to a cholesteric (Ch) mesophase is achieved by adding different ratios of chiral dopants S811. By studying the transmission spectrum, we are able to measure the helical pitch in cholesteric phase. The pitch in the mixtures of nematic E7 and chiral dopants S811 as a function of the concentration of the dopant and temperature is investigated. The sensitivity of the selective reflection notch of the cholesteric phase to the thermal tuning depends strongly on the ratios of the chiral dopants. It reveals that the influence of temperature is more profound for those cholesteric liquid crystals (CLCs) which exhibit smectic A (SmA) at lower temperatures. When fitted using Keating's formula, the helical pitch calculated from our experimental results lies on the predicted curve. Optimised ratios of the mixture CLCs for the optimised reflection band with the specified wavelength ranging from 467 nm to 2123 nm are suggested.     

Temperature calibration of an electrical compensation DSC on cooling using thermally stable high purity liquid crystals

Temperature calibration of DSCs is usually carried out on heating. In order to accurately control the temperature during cooling experiments, the calibration has to be carried out on cooling. Therefore, three high-purity, thermally stable liquid crystals were used to perform a temperature calibration of an electrcial compensation DSC on cooling. All three liquid crystals have several liquid crystalline phases, and they all were purified to a 99.9% lovel. Temoperatures of the isotropic to nematic or cholesteric and the mesophase to mesophase transitions were used. It was verified that these liquid crystals have sufficient thermal stability for carrying out the calibration on cooling. The dependence of the real temperature on the indicated temperature has been established for all the combinations of the heating and cooling rates of practical interest. It is also shown that the vant's Hoff equation can only be applied to the crystal to a liquid crystal transition, but not to the liquid crystal to liquid crystal or liquid crystal to isotropic transitions.     

An electrically light-transmittance-switchable film with a low driving voltage based on liquid crystal/polymer composites

ABSTRACT

As a typical class of electrically light-transmittance-switchable (ELTS) composites materials, polymer dispersed liquid crystal (PDLC) films have been widely used in displays, smart windows, light shutters, etc. However, the commercialised PDLC film still requires a comparatively high voltage to maintain its transparent state, leading to huge power consumption and even a potential safety risk. In this regard, we proposed a ‘heat followed UV’ stepwise polymerisation strategy for preparing a kind of ELTS film with a low driving voltage (~20.7 V) through constructing a coexistent system of polymer dispersed and polymer stabilised liquid crystal (PD&SLC). In this new PD&SLC system, vertically orientated polymer networks were formed within LC domains to induce the vertical alignment of LC, thereby reducing the driving voltage. Also, the as-made PD&SLC film exhibited good flexibility due to the high content of polymer. Moreover, the effects of the liquid crystalline polymerisable monomers content on the polymer morphologies as well as the electro-optical properties of the as-made PD&SLC films were elaborately investigated.     

The effects of some factors on the rheological properties of the lyotropic liquid crystals formed in Brij97/NaDC/IPM/water system: compositions,temperature and polyphenols

In this paper, interaction between Brij97 and NaDC in mixed micelles was studied by surface tension method. Phase behavior for Brij97/NaDC/IPM/H₂O system was investigated at the desire molar ratio of α_NaDC?=?0.42 and the human body temperature of 37?°C. Hexagonal and cubic liquid crystal were found in this system analyzed by small angle x-ray scattering (SAXS). some factors were changed to affect the rheological properties of liquid crystal. Rheological investigations showed: The higher content of water and lower experimental temperature favored the greater values of shear viscosity and viscoelastic modulus; The sample was closer to the plastic fluid and was more likely to recover from disturbed state to equilibrium state at lower ratio of NaDC; The curcumin and TP can influence the shear viscosity, viscoelastic properties and phase transition temperature, even change the structure of liquid crystal. This supplies a way to adjust rheological properties, structure and even phase transition by altering those factors.     

Rheological properties of lyotropic liquid crystals encapsulating curcumin

This study constructed new curcumin-loaded lyotropic liquid crystals containing pharmaceutically accepted oil, and ethyl oleate (EtOL). Three liquid crystalline phases including lamellar, hexagonal, and cubic phases were identified by means of the polarized optical microscopy and rheology method. By analyzing the shear viscosity (η_0.1), the viscosity of curcumin-liquid crystals is smaller than those without curcumin. Dynamic rheological results show that: Dissolved curcumin in EtOL can make the elastic modulus of hexagonal and cubic phase increase compared with that without curcumin, while the elastic modulus of lamellar phase decreases. Dissolved curcumin in Brij 97 can lead to the decreasing of the elastic modulus for cubic and lamellar phases, whereas it has little influence on hexagonal phase. When the curcumin is solubilized in both EtOL and Brij 97, the elastic modus of hexagonal phase increase, the elastic modus of lamellar and cubic phases decrease compared with that without curcumin. Furthermore, three temperature turning points were identified by the change in the slope of tanδ (G″/G′) for curcumin-hexagonal liquid crystal. These studies might be a help to study the storage of drug carrier and in vitro release properties of lyotropic liquid crystals containing curcumin.     

Synthesis and optical behaviour of hydrogen-bonded liquid crystals based on a chiral pyridine derivative

Three series of cholesteryl-containing supramolecular hydrogen-bonded (H-bonded) liquid crystal (LC) complexes with different number of fluoro-substituent were synthesised and characterised. Cholesteryl isonicotinate as proton acceptor and 4-n-alkoxybenzoic acids with or without fluoro-substituent as proton donor had been mixed in tetrahydrofuran to obtain H-bonded LC complexes. The effect of lateral substitution and the length of terminal chain in the H-bonded precursors on the formation of the supramolecular complexes had been examined. It was found that the introduction of fluoro substituent on the induced mesogens could widen the molecular width and thus reduce the molecular aspect ratio of the complexes, therefore it could lead to compress the formation of the LCs. However, the fluoro substituent played a positive role in enhancing the intermolecular interactions and stabilising the H-bond structure of the complexes. The influence of terminal length on the mesogenic behaviours is also discussed. On increasing the spacer length, the clear point and the thermal range of induced mesophase-like cholesteric phase decreased, and an induced chiral smectic phase began to appear in some complexes with long terminal tails.     

Exploitation of orientation of liquid crystals 5CB and DSCG near surfaces to detect low protein concentration

We report the alignment of 4-cyano-4-pentylbiphenyl (5CB), a thermotropic liquid crystal (LC), and disodium chromo glycate (DSCG), a lyotropic LC, on the hydrophobic head group containing dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DMOAP) and hydrophilic amine head group. Based on the texture observed using a polarised microscope for modified surfaces, we propose the alignment of the LCs on the modified surfaces. It is further supported by Fourier transform infra-red spectroscopy (FTIR) data of the corresponding system. Next, the texture under a polarised microscope for the LCs on protein bovine serum albumin adsorbed over the amine and DMOAP surfaces was observed. The difference in texture of LCs over the proteins depends on its concentration in solution. The difference is due to the amount of adsorbed proteins present on the surface. Above a critical amount of protein at the surface, the LCs show homeotropic arrangement.     

Synthesis of novel and regioselectively mesogen-incorporated thermotropic liquid crystals from cellulose derivatives

Regioselectively mesogen-incorporated cellulose derivatives, in which the hydroxy group at C-6 is displaced by a bulky and rigid mesogenic group such as {4-[(4-methoxyphenoxy)carbonyl]phenoxy}acetate or [(4′-cyanobiphenyl-4-yl)oxy]acetate, and the C-2 and C-3 groups are displaced by octanoyl or lauroyl groups, were synthesized. Thermogravimetric and differential scanning calorimetric analyses of the final products, along with polarized optical microscopic observations, revealed that the obtained cellulose derivatives have a thermotropic liquid-crystalline nature and transition from the mesomorphic to the isotropic phase over a wide range of temperatures. These derivatives could be considered to be main-chain liquid-crystalline cellulosic polymers.     

Dual frequency liquid crystals: a review

We review the recent progress in developing high performance dual frequency liquid crystal (DFLC) materials. A new figure of merit is derived for evaluating the DFLC performance. The dielectric relaxation and electro-optical properties of several high performance compounds, which possess a positive dielectric anisotropy at low frequencies and a relaxation frequency in the kilohertz region, are presented. Potential applications of these compounds are discussed. Compounds with a negative dielectric anisotropy were also compared and discussed. Two experimental DFLC mixtures were demonstrated with one intended for room temperature operation and another for elevated temperature operation.     

Syntheses of new diluents for medium birefringence liquid crystals materials

New liquid crystals of 3HEHV ((4-trans-propyl-cyclohexyl-1), (4?-vinyl-cyclohexyl-1?)-ethane-1,2) and 3HB2V ((4-trans-propyl-cyclohexyl-1), (4-butenyl-3,4)-benzene) were synthesised and evaluated as the diluents for medium birefringence liquid crystal mixtures. The procedures transferring cis-isomers into trans-isomers of the cyclohexane were described. The results showed that both 3HEHV and 3HB2V decrease the crystallisation temperature and the viscosities by doping them with the medium birefringence mixtures in a fraction of 15%. The characteristics of the structures are correlated with the properties of the mixtures.     

Synthesis and properties of new ionic liquid crystals based on para-nitroazobenzene with substitution vinylimidazolium ion group

A new series of ionic liquid crystals (ILCs), 1-(4-(4-nitrophenylazo)phenyloxy) vinyl-3-methyl-1H-imidazol-3-ium bromide salts (C _n , n?=?6, 10) were synthesised. Their chemical structures were determined by ¹H NMR, ¹³C NMR, UV spectroscopy and elemental analysis. The liquid crystalline properties were investigated by differential scanning calorimetry, polarising optical microscopy, and powder X-ray diffraction. These measurements showed that C _n (n?=?6, 10) exhibit smectic liquid crystalline phases with focal-conic fan-shaped textures. The introduction of vinylimidazolium group onto the azobenzene enhances the thermal stability of the smectic state, which play an important role in forming the smectic layer structure.     

Chiral banana liquid crystals derived from sugars

This paper describes the synthesis and physical properties of a chiral bent-core liquid crystal containing the chiral non-aromatic central ring system 1,5-anhydro-2-desoxy-D-arabino-hexitol. The preparation involved a stepwise construction of the mesogenic side chains via a selective diesterification of glucal at positions three and six with 4-O-acetylbenzoyl chloride followed by selective deacetylation. Repeated esterification of the aromatic hydroxy group with a substituted benzoic acid and hydrogenation of the double bond resulted in the desired product. To our knowledge, this is the first banana shaped liquid crystal synthesized containing a sugar derivative as a chiral core. Investigation of the mesogenic properties and electro-optic experiments showed traditional calamitic phases along with banana phases.     

The effect of mono-sized liquid crystal domains on electro-optical properties in a polymer dispersed liquid crystal prepared by using monodisperse poly(methylmethacrylate)/liquid crystal microcapsules

Highly mono-sized poly(methyl methacrylate) (PMMA)/liquid crystal (LC) microcapsules having a mono-sized single LC domain were prepared by the solute codiffusion method and solvent evaporation. The size of the LC domain in the microcapsules could be controlled by the amount of LC introduced during the swelling stage. The electro-optical properties of the polymer dispersed liquid crystal (PDLC) prepared by using the microcapsules was highly improved. In particular, the threshold voltage was lowered and the switching behaviour with an applied electric field was sharpened drastically compared with PDLC prepared simply by solvent evaporation-induced phase separation.     

凝结热对低阶煤低温氧化过程的影响

选用Pulse Calorimeter仪器,研究了低阶煤在干燥氧气下低温氧化过程的反应热和相对湿度为80％的氮气下凝结热与温度的变化,以研究凝结热对低阶煤低温氧化过程的影响。结果表明,随着温度的上升体系的反应热增加,而凝结热减少。在26℃~60℃的低温下,体系的凝结热明显高于反应热。因此,低温下凝结热是影响低阶煤的低温氧化过程的重要因素。研究还得到了低阶煤在干燥氧气下低温氧化过程的动力学方程及活化能。     

Digital optical memory devices based on polymer-dispersed liquid crystals films: appropriate polymer matrix morphology

ABSTRACT

Permanent memory effect (PME) in polymer dispersed liquid crystal (PDLC) allows a greater applicability range than traditional PDLCs. One of the most interesting application could be the possible storing of optical information, the so-called Digital Optical Memory (DOM) devices. To test this application it would be required a display structure having an array of pixels addresses. Each pixel was filled with PDLC film with PME and electric field can be independently applied to different PDLC elements to define on/off pixel states (transparent or scattering states).PDLC films were obtained from a mixture of E7 nematic liquid crystal and poly(ethylene glycol) dimethacrylate with 875 g mol^-1oligomer as precursor of the polymeric matrix. The effect of the curing temperature and the UV light intensity as well time exposure during the polymerisations on the electro-optical performance of PDLC films were investigated. In this way, a high transparency state (T_OFF=55%) for a long period of time at room temperature even after the applied voltage has been switched off were obtained, started from an opaque state (T₀=0%) and after reaching a transparent state (T_MAX=75%), which causes 73% PME. The application to an 8x8 passive matrix using PDLC with PME is also demonstrated as proof-of-principle.