Characteristics analysis of hybrid plasmonic waveguide for low-loss lightwave guiding

It has been experimentally demonstrated that a low-loss guided hybrid mode is supported if a metal strip is embedded in a low index polymer layer surrounded by two high index slabs. In this paper, further numerical analyses on the guided hybrid modes are reported to fully elucidate the characteristics of the hybrid plasmonic waveguide. For a one-dimensional slab structure with a metal film of infinite width, simulation results exhibit that low-loss guided hybrid modes are associated with surface plasmon modes and dual dielectric slab modes. The optical properties of the guided modes are improved by increasing the field intensity which is confined into lossless dielectric layers by decreasing the metal film thickness and increasing the refractive index and thickness of the high-index slabs. The finite element method is used to investigate the lateral mode confinement of the optical guided modes by the corresponding metal strip. By reducing the metal film width, the guided modes are confined in the plane transverse to the direction of propagation and the characteristics are significantly improved. The hybrid plasmonic waveguide can be exploited for long-range propagation-based application such as optical interconnection.     

Guided modes in asymmetric metal-cladding left-handed material waveguides

We investigate guided modes in the asymmetric waveguide structure with a left-handed material (LHM) layer surrounded by air and metal. A graphical method is proposed to determine the guided modes. New properties of the oscillating and surface guided modes, such as absence of the fundamental mode, coexistence of the oscillating and surface guided modes, fast attenuation of the surface guided modes, and mode degeneracy, are analyzed in detail. We also investigate dispersive characteristics of the metal-LHM- air optical waveguide. The propagation constant increases with decreasing slab thickness for the first-order oscillating mode, which is different from that in traditional metal-cladding waveguides.     

Finite element beam propagation method for analysis of plasmonic waveguide

The basic idea of the finite element beam propagation method (FE-BPM) is described. It is applied to calculate the fundamental mode of a channel plasmonic polariton (CPP) waveguide to confirm its validity. Both the field distribution and the effective index of the fundamental mode are given by the method. The convergence speed shows the advantage and stability of this method. Then a plasmonic waveguide with a dielectric strip deposited on a metal substrate is investigated, and the group velocity is negative for the fundamental mode of this kind of waveguide. The numerical result shows that the power flow direction is reverse to that of phase velocity.     

电磁波在负折射材料填充的3层平板波导中的传播特性

从电磁场理论出发对负折射材料填充的3层平板波导的传播特性进行研究,并进行了数值计算,分析TE和TM波在平板中传播的性质,得到了电磁波的模式方程,与电磁波在右手材料填充的平板波导中的传播特性做了对比,考察了TE模式的能流密度,进行了归一化计算。结果分析表明：基模、一阶模不存在,且任何模式都存在一个截止厚度,随着厚度的增大,模式数量也增多;在一定的入射频率下,平板薄膜厚度趋向一定数值时,可以同时传播多种模式的波,并且入射波频率越高,波导同时存在多种模式的可能性越大;与右手材料相比,左手材料填充相同尺寸的3层平板波导可以传播更高能量的电磁波,导波效果更好。     

含左手材料对称三层平板空气波导的模式特性

研究了左手材料作为衬底及覆盖层的对称三层平板空气波导的传输特性.快波和慢波都可以在这种波导中传播.快波不存在基模模式,只有0阶和1阶的TE或TM模才会出现慢波.当左手材料的相对介电常量和相对磁导率相等时,TE、TM模式完全简并,当其相异时简并消除.可以存在同阶模式的双传播模.     

Guided and semileaky modes in anisotropic optical waveguides of the LiNbO3 type

Light propagation in anisotropic optical waveguides formed by an isotropic or a uniaxial layer onto a uniaxial substrate is studied theoretically. Special attention is paid to semileaky modes which are lossy due to the radiation of energy into the substrate. Both their propagation constants and loss coefficients are calculated numerically for waveguide parameters close to As-S glass layer onto LiNbO₃ substrate and to LiNbO₃ out-diffused and in-diffused waveguides.     

Electromagnetic waves in uniaxial anisotropic chiral waveguides in magnetized plasma

The characteristics of guided modes in circular waveguides of a uniaxial anisotropic chiral core and a cladding filled with anisotropic plasma are presented. The cladding region is assumed to be infinitely extended with an external applied magnetic field oriented along the direction of propagation in the waveguide. The characteristics equation for the modes in this waveguide are obtained. The variations of the propagation properties with the plasma parameters, chiral parameters, and the cyclotron frequency of plasma have been investigated. Particularly, the effects of the chirality and the cyclotron frequency of plasma on the magnitude and orientation of the energy flux of the guided modes for three kinds of uniaxial anisotropic chiral media have been numerically investigated. Comparisons of the computed results of the presented formulations with published results for some special cases confirm the accuracy of the presented analyses.     

Energy concentration at the center of large aspect ratio rectangular waveguides at high frequencies

Waveguides in non-destructive evaluation (NDE) applications are commonly of a regular geometry (e.g., circular and ring cross section) for which analytical solutions exist. In this paper, wave propagation in infinitely long strips of large rectangular aspect ratio is discussed. Due to the finite width of strips, a large number of modes exist within the structure. This complicates the analysis and usually discourages the use of strip waveguides in NDE sensors. However, it is shown that among the many modes of a strip, there are some with very desirable properties. This is highlighted by the example of two guided wave modes of a large aspect ratio rectangular strip whose dispersion characteristics approach those of the fundamental modes of an infinitely wide plate at high frequencies. The energy of these modes concentrates in the central region of the strip and decays toward the edges so that the strip waveguide can easily be mechanically attached to other components without influencing the wave propagation. Dispersion curves and mode shapes were derived by using a semianalytical finite element technique and are presented over a range of frequencies. It is shown that selective excitation of both modes is possible in practice and the experimental setup is described.     

Propagation of surface plasmon polaritons in anisotropic MIM and IMI structures

Electromagnetic wave propagation through waveguide structures consisting of anisotropic dielectric layers, assisted by surface plasmon-polaritons (SPPs) is theoretically studied. Dispersion relations corresponding to both short range and long range coupled SPP modes in metal/insulator/metal (MIM) and insulator/metal/insulator (IMI) structures, taking into consideration the anisotropy of the insulator, are derived and numerically solved. The dispersion has a prominent dependence on the anisotropy of the dielectric environment. The dependence of propagation on the misalignments of the optic axes of the insulator has also been investigated.     

Investigation of THz Sommerfeld wave propagation on single-wire at different temperature

In this paper, THz Sommerfeld wave propagation on dielectrically coated cylindrical metal wire and conical metal wire is presented. The propagation characteristics of single wire are largely related to the characteristics of material being used, which may change significantly with the temperature variation. Then, the surface wave propagation along the THz wire waveguide is investigated by the numerical calculation from 0.1 to 1 THz at different temperature. The influences of different conductivity and different temperature on the propagation characteristics of the dielectrically coated cylindrical metal wire and conical metal wire are discussed, including electric field distribution, propagation loss and energy coupling characteristic. The analysis results release a fundamental characteristic for describing the THz surface wave propagation on single wire at different temperature, and moreover, the analysis results also suggest that the single wire is a promising THz waveguide and very useful for the space sensing at cryogenic temperature in future.     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

金属包层对称平面单轴晶体波导的模式场(Ⅱ)

对于晶体光轴平行于波导界面的结构,讨论了光在金属包层对称平面单轴晶体波导(波导层是单轴晶体,两个波导界面均为金属)内的传输特性.解析地得到了这种结构下波导模式场的精确解.模式场的性质因单轴晶体的性质不同而异.对于正单轴晶体,波导的主模是横电波,任何频率的光波均可激励该模式;当频率满足一定条件时,波导内传输单模,否则,将激励起高阶模式.高阶模既非TE波,也非TM波,而是两者耦合而成的混合模.对于负单轴晶体,波导的主模是一种混合模,该模式同样可被任何频率的光波所激励;当频率满足一定条件时,波导内传输单模,否则 关键词： 平面金属波导 单轴晶体 模式场 混合模     

Accurate Analysis of Microstrip Lines on Lossy Biaxial Anisotropic Substrates

We have studied the behavior of the microstrip lines on lossy biaxial anisotropic dielectric substrates. A spectral-domain moment method is used with the Galerkin testing procedure to determine the dispersion characteristics of single and coupled lines. Modes of both even and odd symmetries are included. It is found that the anisotropy of the substrate has a significant influence on the propagation characteristics. The theory is verified by comparison with previously published data.     

Investigation of the guided modes in anisotropic diffused slab waveguide with embedded metal layer

Abstract

The optical characteristics of the TE and TM guided modes of a multilayer anisotropic two-dimensional waveguide are investigated by using the field component transformation matrix, and also taking into account the substrate intrinsic dispersion. The embedded thin metal layer effects on the propagation constant for both lossless approximated and exact solutions are presented. The lossless approach is accurate enough for the TE waves, but it is not for the TM ones, which exhibit changes of about 10^?6 for the equivalent index. The TM modes also present attenuation constant changes between the lossy and weakly-lossy solutions of the order of 9 dB/cm. Several complex field component mappings are drawn, and the surface plasma waves are also examined.     

On the propagation characteristics of metal clad waveguides with a quantum well

The electromagnetic modes of planar metal clad dielectric waveguides containing an n-doped quantum well (QW) are studied theoretically. Special attention is paid on the coupling between metal surface plasmons and intersubband plasmons and the manifestation of this coupling in the propagation characteristics of metal/QW/dielectric and multimode metal/QW/dielectric/metal waveguide structures. The results obtained indicate that the modification of the propagation characteristic induced by the above-mentioned coupling is substantial only in the case of metal/QW/dielectric waveguide structures.     

Active modulation of plasmonic signal with a subwavelength metal/nonlinear dielectric material/metal structure

<正>Light propagation through a metal/nonlinear dielectric material/metal(M-NL-M) structure is numerically studied.The design parameters of the M-NL-M structure are found with the waveguide theory so that the structure only supports the symmetric surface plasmon polaritons(SPP(0)) mode and the antisymmetric surface plasmon polaritons(SPP(1)) mode.The coupling between the two modes within the M-NL-M structure is exploited.Through controlling the propagation constants of the two modes with the intensity-dependent dielectric constant of the nonlinear Kerr material,an effective all-optical control of plasmonic signal modulator can be realized with this M-NL-M structure.     

Frequency response of metal clad planar optical waveguides

The propagation characteristics of metal clad planar optical waveguide as a function of wavelength are investigated theoretically for Al, Ag, and Au. The results obtained show that attenuation of the propagation modes in these guides is highly dependent on wavelength, which can be used to design an efficient integrated optical waveguide polarizer with high extinction ratios, or to select the wavelength for the surface plasmon based metal clad optical waveguide sensors. It is observed that Al is the only metal that still supports the surface plasmons in the UV region.     

Theory of absorption integrated optical sensor of gaseous materials

The eigen and noneigen (leaky) modes of a three-layer planar integrated optical waveguide are described. The dispersion relation of a three-layer planar waveguide and other dependences are derived, and the cutoff conditions are analyzed. The diagram of propagation constants of the guided and radiation modes of an irregular asymmetric three-layer waveguide and the dependence of the electric field amplitudes of radiation modes of substrate on vertical coordinate in a tantalum integrated optical waveguide are presented. The operating principles of an absorption integrated optical waveguide sensor are investigated. The dependences of sensitivity of an integrated optical waveguide sensor on the sensory cell length, the coupling efficiency of the laser radiation into the waveguide, the absorption cross-section of the studied material, and the level of additive statistical noise are investigated. Some of the prospective areas of application of integrated-optical waveguide sensors are outlined.     

Guided modes in slab waveguides with a left handed material cover or substrate

We study guided modes propagating along a dielectric slab waveguide with a left handed material (LHM) cover or substrate. The dispersion relation is derived by using normalized waveguide parameters. An analytical method is then proposed to calculate the universal dispersion curves. Different from a slab waveguide with a LHM core, we find that guidance properties are strongly dependent on dielectric permittivity ε and magnetic permeability μ of the substrate and cover layers. For oscillating guided modes, fundamental zero order mode is not always absence, sometimes it exists in a restricted range of normalized propagation constant. First order mode behaves as other higher order modes and exists up to infinite high frequency. Higher order modes have no double degeneracy in the case of LHM cover layer. For surface guided modes, the existence and the type of the mode solutions with respect to different parameters are classified systematically and discussed in detail. Unlike a slab waveguide with a LHM core where the dispersion curve of TE₁ surface mode continues with that of oscillating TE₁ mode, the dispersion curve of TE₁ surface mode continues with that of oscillating TE₀ mode. It seems that the two different kinds of modes compensate each other to form one whole mode. Both TE and TM guided modes are discussed.     

Transmission properties of asymmetric slab waveguides with left-handed materials

A new dielectric slab waveguide with a left-handed material (LHM) cover and substrate is proposed. The dispersion relations and normalized effective thickness of the asymmetric LHM slab waveguide are investigated, in view of the normalized parameters. A number of unusual properties are found, for example, the fundamental and first-order modes do not exist and higher-order modes have double degeneracy. The propagation modes are absent at the low normalized frequency, and the cutoff frequencies of some LHM slab waveguide modes decrease with increase in the asymmetry measure. Unlike traditional slab waveguides, the V –H curves of the LHM slab waveguides are in one-to-one correspondence. Both TE and TM modes are discussed; in addition, the dispersion relations and normalized effective thicknesses of the TM modes are discussed in detail, when the difference in refractive indices of the film and the substrate is small. The results show that the region of mode coexistence taking place near the cutoff frequency becomes narrower with increase in the difference in refractive indices of the film and the substrate. The influence of this difference on the normalized effective thickness curves is different, and becomes smaller and smaller with increase in the value of the asymmetry measure, if different values of the refractive indices are employed.