Pyrolysis of vinyl and vinylidene fluoride polymers: Influence of prior γ-irradiation

Quantitative comparisons were made between the rates of thermal volatilization of several fluoropolymers before and after exposure to γ-radiation. The effects of γ-irradiation on poly(vinyl fluoride) and poly(vinylidene fluoride) were also investigated by swelling and sol-gel ratios. With both polymers as well as with polytrifluoroethylene, crosslinks occur predominantly, though there is an appreciable number of scissions. The rates of volatilization and char formation were enhanced by γ-radiation, whereas the previously studied polytrifluoroethylene did not produce more char upon irradiation, although radiation did accelerate its volatilization. It is believed that in polytrifluoroethylene the enhanced rates of volatilization occur by a different mechanism than in the case of the vinyl and vinylidene fluoride polymers.     

ESCA study of the surface photo-oxidation of some non-aromatic polymers

Changes in the surface composition and structure of a number of non-aromatic polymers subjected to ultraviolet irradiation in oxygen (～ 1 atm., 20°C) have been studied. No changes in surface composition were detected after photo-oxidation of poly(vinylidene fluoride) (12 h of irradiation), low density polyethylene (7·5 h) or high density polyethylene (22·3 h). This reflects the absence in these polymers of an efficient ultraviolet absorber to initiate the photo-oxidation. The surfaces of poly(methyl methacrylate) and nylon 66 show an increase in oxygen content following irradiation. In these polymers this added oxygen is present principally as carboxyl groups and, in the case of poly(methyl methacrylate), as carbonyl groups. In nylon, there is no evidence for changes in the amide group and no oxidation of the nitrogen is detected.     

Piezoelectricity,pyroelectricity, and the electrostriction constant of poly(vinylidene fluoride)

A new device for measuring the electrostriction constant of polymer films is described. Observed values for various polymers except poly(vinylidene fluoride) and poly(methyl methacrylate) agree well with those calculated from the Clausius-Mosotti equation. Elongational piezoelectricity, the pyroelectric current, and the electrostriction constant are measured for undrawn and roll-drawn poly(vinylidene fluoride) films. The piezoelectricity and pyroelectric current are attributed to space charges antisymmetrically distributed along thickness direction of the film for two reasons: (1) the polarity coincides between these two phenomena for all specimens, and (2) the piezoelectricity and the electrostriction constant have the same anisotropy for drawn films. Similarity of signs between piezoelectricity and pyroelectric current is observed also in poly(vinyl chloride) films. The electrical behavior of poly(vinylidene fluoride) is interpreted in terms of the ferroelectric nature of the β-form crystal.     

聚偏氟乙烯的辐射交联及其交联度的XPS表征

本文首次用XPS研究了聚偏氟乙烯的辐射交联机理,交联度的XPS表征。计算出聚偏氟乙烯的β值为0.7,发现聚偏氟乙烯的辐射交联的溶胶分数与辐照剂量的关系符合我们提出的通式^[1]。用XPS方法求得聚偏氟乙烯的凝胶化剂量为1.59mrad。     

Analysis of the hysteresis curve of ferroelectric polymers by a phenomenological relaxation theory

A simple relaxation theory for the displacement versus electric field hysteresis of ferroelectric polymers is developed in which the relaxation time is assumed to be a function of electric field, as has been experimentally evidenced by polarization-reversal switching. The theory gives an analytical expression for the hysteresis curve. The coercive field E_c predicted by the theory agrees well with data on E_c as a function of temperature for poly(vinylidene fluoride) from ?60 to 20°C and with data on E_c as a function of frequency for vinylidene fluoride/trifluoroethylene copolymer (73/27 molar ratio) at 20°C over the range 0.01–0.7 Hz.     

Microhardness measurements of poly(methyl methacrylate) and poly(vinylidene fluoride) polyblends

The preparation of polymer blends of poly(methyl methacrylate) and poly(vinylidene fluoride) in different weight percentages is described. Vickers microhardness measurements have been made to study the effects of load and compositional ratio of the two polymers in polyblend. It is observed that poly(vinylidene fluoride) acts as a plasticizer for poly(methyl methacrylate). Evidence of increasing and decreasing strength of polyblends has been obtained for different compositional ratios of the two polymers.     

Heat capacity of poly(vinylidene fluoride) and polytetrafluoroethylene between 5 and 200°K

Heat capacities of poly(vinylidene fluoride) (PVF₂) and polytetrafluoroethylene (PTFE) have been measured between 5 and 100°K with an accuracy of (1–5)% by adiabatic calorimetry. Calculations based on contributions from known optical lines and the Tarasov continuum model are in good agreement with experimental results down to 30°K for PVF₂ and 10°K for PTFE, and yield characteristic temperatures θ₁ and θ₃ which are consistent with previous values determined from high-temperature (100—350°K) data. At lower temperature the measured heat capacity is significantly higher [(30–100)%] than the model prediction, and can be satisfactorily accounted for by the introduction of localized vibrators at a concentration of about 1% as compared to acoustical oscillators and at a characteristic temperature of about 20°K. Using established data on polyethylene for comparison, the principle of additivity for heat capacities is found to be valid down to at least 20°K, convering the region (<60°K) where interchain vibrations contribute significantly to the heat capacity. Possible reasons for this unexpected behavior are discussed.     

Piezoelectricity of uniaxially stretched poly(vinylidene fluoride) corona poled at elevated temperature

X-ray diffraction, thermally stimulated depolarization, and piezoelectric current measurements have been carried out on uniaxially stretched poly(vinylidene fluoride) film, corona poled both negatively and positively at room temperature and at 90°C. Corona poling at elevated temperature considerably enhances the piezoelectric constant and is a more efficient way of charging the film than conventional thermal poling. Advantages over the latter are discussed.     

Negative thermal expansion of poly(vinylidene fluoride) and polyethylene tie molecules: A molecular dynamics study

The mechanism of thermal actuation for poly(vinylidene fluoride) (PVDF) and polyethylene (PE) tie molecules has been investigated using molecular dynamics simulations. Tie molecules are found in semicrystalline polymers and are polymer chains that link two (or more) crystalline lamellae, allowing for the transfer of force between these regions. A novel simulation technique has been developed to enable measurement of changes in the tie molecule length upon heating. We investigate the dependence of the percentage actuation observed upon heating, on the external applied force that stretches the tie molecules, the temperature range used for heating as well as the length and the number of tie molecules. Two molecular level mechanisms for actuation are identified. An entropically driven mechanism occurs at low applied forces and is applicable to all flexible polymers. A second mechanism due to conformational changes is observed for PVDF but not for PE at intermediate applied forces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2223–2232     

Sorption and swelling of semicrystalline polymers in supercritical CO2

The equilibrium sorption and swelling behavior of four different polymers—poly(methyl methacrylate), poly(tetrafluoroethylene), poly(vinylidene fluoride), and the random copolymer tetrafluoroethylene–perfluoromethylvinylether–in supercritical CO₂—are studied at different temperatures (from 40 to 80 °C) and pressures (up to 200 bar). Swelling is measured by visualization, and sorption through a gravimetric technique. From these data, the behavior of amorphous and semicrystalline polymers can be compared, particularly in terms of partial molar volume of CO₂ in the polymer matrix. Both poly(methyl methacrylate) and the copolymer of tetrafluoroethylene exhibit a behavior typical of rubbery systems. On the contrary, polymers with a considerable degree of crystallinity, such as poly(tetrafluoroethylene) and poly (vinylidene fluoride), show larger values of partial molar volume. These can be related to the limited mobility of the polymer chains in a semicrystalline matrix, which causes the structure to “freeze” during the sorption process into a nonequilibrium state that can differ significantly from the actual thermodynamic equilibrium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1531–1546, 2006     

Molecular interactions at the interface in blends of ester groups-functionalized polyolefins

Due to the apolarity of the aliphatic backbones, unmodified polyolefins are scarcely miscible with most of other polymers. The functionalization of preformed polyolefins is a way which has been successfully followed to improve the polymer miscibility. The functionalization of linear low density polyethylene (LLDPE) and ethylene-propylene copolymers (EP), with diethyl maleate (DEM) and dicumyl peroxide (DCP) as radical initiator, gives products containing up to 2–5 mol % of well defined functional groups (2-diethyl succinate). Intermolecular interactions of these functional groups are characterized by comparison with suitable low-molecular-weight structural models in the presence of different solvents containing acidic hydrogen atoms. On the basis of these indication evidences of interface molecular interactions in blends with halogenated polymers are described between the functionalized polyolefins and poly(vinyl chloride) (PVC), poly(vinylidene fluoride) (PVDF) or vinylidene fluoride-hexafluoropropene copolymer obtained in semiindustrial Brabender mixers. It is shown that a smooth functionalization of the polyolefins can modify the phase behaviour and structure of these systems. The FT-IR microanalysis supports the occurrence of partial miscibility phenomena which can be accounted for by specific intermolecular interactions involving the inserted functional groups and occurring mainly at the interfaces between domains of polyolefins and of the halogen-containing polymers.     

NEW MATERIALS DERIVED FROM POLY(4-HYDROXYSTYRENE) AS LITHIUM BATTERY CELL COMPONENTS

A new class of polyethers has been prepared by the Mitsunobu coupling of poly(4-vinyl phenol), P4VP, with low molecular weight poly(ethylene glycol)methyl ether. These comb-like polymers, having ca. 20–30% residual phenols, were characterized by IR, DSC, and TGA. Results of thermal analysis on the polymers suggest thermal stability to at least 300°C and a glass transition temperature in the range ?30 to ?40°C. Complexes with LiPF₆ gave conductivities of ca. 1 × 10^?5 S/cm at room temperature. The polymers were blended with plasticized poly(vinylidene fluoride) (PVDF) to prepare porous films and subsequently infiltrated with lithium salts and ethylene and ethyl methyl carbonate. Ionic conductivities of these hybrid films were measured from ?20°C to 40°C. Conductivities as high as 2.4 × 10^?3 S/cm are observed at room temperature. The electrochemical stability of hybrid materials was studied by cyclic voltammetry.     

DFT study of ferroelectric properties of the copolymers: Poly(vinylideneflouride‐trifluoroethylene) and poly(vinylidene fluoride‐chlorotrifluoroethylene)

A theoretical study of poly(vinylidene flouride‐trifluoroethylene) and poly(vinylidene fluoride‐chlorotrifluoroethylene, is presented. By density functional theory calculations, some of the properties of these materials have been obtained. Among such properties, the dipolar moment and the energies associated to the structural changes. The B3LYP functional and 6311+G(d,p) bases set were used with Gaussian program. Calculations associated to different conformations were carried out to get insight about the involved phase changes. The energetic, charges, and dipole moment were calculated. The conformations, namely, I = T_p, II = TG_a, and III = TG_p, where T means trans and G means gauche, for the two polymers aforementioned were compared with the poly(vinilydene fluoride) studies previously obtained. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2411–2417, 2010     

Rotational isomerism and physical properties of long-chain molecules in solid states

Rotational isomerism occurring in solid state of organic long-chain compounds, including synthetic linear polymers, have been concerned in connection with the macroscopic physical properties of bulk materials. The conformational order in the non-crystalline part of polyethylene has been investigated by Raman spectra, and related to the elastic behaviors of bulk samples. In the solid-state phase transition induced by mechanical forces of poly(butylene terephthalate) the macroscopic strain has been related directly to the conformational conversion of the molecules. Concerning the piezoelectric and pyroelectric activities of poly(vinylidene fluoride), polymorphism, phase transition, and structural change on the poling process have been investigated. A ferroelectric-paraelectric phase transition has been found for a series of copolymers of vinylidene fluoride and trifluoroethylene. On the phase transition a great change in molecular conformation is accompanied with the scrambling of the dipolar orientation. This is the characteristic of polymer ferroelectrics in which the dipolar units are linked with each other by covalent bonds in a molecular chain. Spectroscopic evidences are presented indicating that the thermodynamic stability of polymorphs of n-fatty acids is closely related to the rotational isomerism occurring in the carboxyl groups.     

Étude thermodynamique du système compatible polyfluorure de vinylidène-polyméthacrylate d'éthyle par chromatographie gaz-liquide

The thermodynamics of interaction between poly(ethyl methacrylate) and poly(vinylidene fluoride) have been studied by gas-liquid chromatography on their homogeneous blends (40 < PVDF < 80% by weight) in the liquid state (t > 140°C) using a variety of probes covering a wide range of polarity and of affinity for the polymers. The average and most representative interaction parameter χ₂₃′ (Flory-Huggins) is estimated as −0.32 ± 0.09, showing only slight sensitivity to temperature between 160 and 200°C and composition of the blend. The purely interactional χ₂₃ parameter (Prigogine-Flory-Patterson) is strongly negative (χ₂₃ = −6.5 J/cm³) as a result of dipolar and hydrogen bond interactions between the polymers.     

Correlation of thermal degradation mechanisms: Polyacetylene and vinyl and vinylidene polymers

The thermal degradation of poly(vinyl bromide) (PVB), poly(vinyl chloride) (PVC), poly(vinyl alcohol) (PVA), poly(vinyl acetate) (PVAc), poly(vinyl fluoride) (PVF), poly(vinylidene chloride) (PVC₂), and poly(vinylidene fluoride) (PVF₂) has been studied by direct pyrolysis–mass spectrometry (DP-MS) and flash pyrolysis–gas chromatography–mass spectrometry techniques. Vinyl and vinylidene polymers exhibit two competitive thermal degradation processes: (1) HX elimination with formation of polyene sequences which undergo further moleculaar rearrangements, and (2) main-chain cleavage with formation of halogenated or oxigenated compounds. The overall thermal degradation process depends on the prevailing decomposition reaction in each polymer; therefore, different behaviors are observed. The thermal degradation of polyacetylene (PA) has also been studied and found important for the elucidation of the thermal decomposition mechanism of the title polymers.     

Crystallization of poly(vinylidene fluoride): Equilibrium melting point and heat of fusion of the α-polymorph

Samples of poly(vinylidene fluoride) were crystallized either (a) isothermally at a series of temperatures, or (b) in the presence of varying amounts of diluent (dimethylphthalate or dimethylacetamide). The α-polymorph was the only crystalline form present in these samples. Melting points of the first series (a) were determined by DSC and of the second (b) by dilatometry. The same equilibrium melting point for the α-polymorph (178°C) was obtained from analysis of the two sets of data. A value of 1425 cal mole^?1 (5.96 kJ mole^?1) for the heat of fusion of this polymorph was obtained from analysis of the polymer–diluent melting data. The heat of fusion and the entropy of fusion calculated therefrom correlated well with corresponding values for other fluoroethylene polymers. Thus, the equilibrium melting point and the heat of fusion could be predicted for a fluoropolymer for which data have not yet been reported–poly(trifluoroethylene). The melting point predicted, 222°C, agreed remarkably well with that determined here for an experimental sample, thereby lending support to the empirical correlations. The heat of fusion of poly(trifluoroethylene) is, therefore, expected to be approximately 1300 cal mole^?1.     

Processing of semicrystalline polymers by high-stress extrusion

A study has been conducted on the solid-state extrusion of three semicrystalline polymers:poly-propylene (PP), poly(vinylidene fluoride) (PVDF), and high-density polyethylene (HDPE). HDPE has been extruded in continuous lengths with area reductions up to 25× at temperatures substantially below the melting region. Such extrusion has been identified as a solid-state process, since measurements of the temperature of the polymer during extrusion indicate the absence of significant heating due to deformation. In contrast, continuous lengths of PP and PVDF could not be obtained substantially below their melting temperatures, indicating that crystallization during extrusion is an important process for these polymers. Under severe extrusion conditions (low temperatures, high area reductions. etc.), all three polymers failed within the tapered region of the extrusion die. Two modes of failure have been identified, brittle fracture and, surprisingly, necking. Grid-line distortion patterns and a highly simplified upper-bound plasticity analysis both indicate that shear deformations are a major factor during high-stress extrusion.     

Electron spin resonance spectra of polymers during fluorination

ESR spectra characteristic of peroxy radicals appeared rapidly in all of eleven hydrogen-containing polymers examined when treated with dilute fluorine. These radicals presumably result from the reaction of hydrocarbon and fluorocarbon radicals, existing at undetectably low steady-state concentrations, with the oxygen impurity content of commercial fluorine. In poly(vinylidene fluoride) films of thickness 11 and 58 μm the radical contents were nearly proportional to surface area rather than volume, in agreement with earlier reports of a shallow depth of penetration. Some polymers exhibited also or exclusively a broad spectral component, varying in character with the polymer; examples are polystyrene, polyethylene, poly (vinyl chloride), poly(vinylidene chloride), polyoctafluoropentadiene, polyhexafluoropropene, and a fluorinated graphite. The broad spectral component did not react with ordinary radical scavengers such as propylene and oxygen, and is probably not due to a fluorocarbon radical but to unknown transition metal fluorides.     

Thermal Characterization of Polybutadiyne

Butadiyne was thermally polymerized from the vapor phase onto substrate polyethylene, poly(vinylidene fluoride), polytetrafluoro-ethylene, and fluorinated ethylene propylene films at 20°C. The reaction is characterized as an initial absorption of monomer into the film followed by polymerization in the condensed state. A postpolymerization thermal reaction of the polybutadiyne pendant ethynyl groups was conducted over a 120 to 470°C temperature range with a subsequent surface electrical resistivity decrease to 7 × 10¹¹ ohm/square. The reaction of the pendant acetylenic groups was monitored by DSC and IR spectroscopy and found to be more complex than an intramolecular conversion of an acetylenic polyene to a polyacene structure.