Stable single-longitudinal-mode fiber laser using PM FBG F-P etalon and PM fiber saturable absorber

we present a stable and high efficiency single-longitudinal-mode (SLM) fiber ring laser by using polarization-maintaining fiber Bragg grating Fabry-Perot (PM FBG F-P) etalon combining PM fiber saturable absorber. The PM FBG F-P etalon, which is directly fabricated in hydrogen-loaded PM fiber, is used as reflector and mode-selecting component to reduce the longitudinal-mode density greatly. Meanwhile, a segment un-pumped PM Er³⁺-doped fiber (EDF) serves as saturable absorber to suppress mode hopping and ensure the stable SLM operation. Stable SLM laser output at 1550.4 nm with linewidth of 2.0 kHz is observed. Laser output power is 43.7 mW for a pump power of 148 mW, optical-optical efficiency is 29.5% and signal-to-noise ratio (SNR) is larger than 55 dB.     

Switchable single-longitudinal-mode dual-wavelength erbium-doped fiber ring laser based on one polarization-maintaining fiber Bragg grating incorporating saturable absorber and feedback fiber loop

Switchable single-longitudinal-mode (SLM) dual-wavelength erbium-doped fiber ring laser based on one polarization-maintaining fiber Bragg grating (PMFBG) is demonstrated. Due to the enhancement of the polarization hole burning (PHB) by the PMFBG, the laser can be designed to operate in stable dual-wavelength or wavelength-switching modes with a wavelength spacing of 0.336 nm at room temperature by adjusting a polarization controller (PC). The stable SLM operation is guaranteed by a compound-ring cavity and a saturable absorber (SA). The optical signal-to-noise ratio (OSNR) is over 45 dB. The amplitude variation in nearly one and half an hour is less than 0.2 dB.     

Stable single longitudinal mode erbium-doped silica fiber laser based on asymmetric linear three-cavity structure

We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. In laboratory condition, the performance of power fluctuation of less than 0.05 dB observed from the power meter for 6 h and wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.     

Stable single longitudinal mode erbium-doped silica fiber laser based on an asymmetric linear three-cavity structure

We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.     

Tunable single-longitudinal-mode Ytterbium all fiber laser with saturable-absorber-based auto-tracking filter

A broadband tunable, single-longitudinal-mode (SLM) Ytterbium fiber laser with unpumped Ytterbium-doped Sagnac loop is proposed and demonstrated experimentally. The unpumped Ytterbium-doped Sagnac loop is employed as a saturable absorber based auto-tracking filter to ensure single-longitudinal-mode oscillation. And a tunable band pass optical filter with large tuning range is applied to achieve broadband tuning ability. With 1-m Ytterbium-doped fiber as the gain medium, the SLM operation is achieved with over 60-nm wavelength tuning range at 160-mW pump power. The laser is very stable with output power of about 3 dBm and optical signal to noise ratio of higher than 50 dB in all the 60-nm tuning range.     

Tunable single-longitudinal-mode SOA-based fiber laser based on the spectral narrowing effect in a dispersion-shifted fiber

A tunable single-longitudinal-mode(SLM) semiconductor optical amplifier(SOA)-based fiber laser based on a dispersion-shifted fiber(DSF) is proposed and successfully demonstrated. SLM operation is obtained due to the spectral narrowing effect resulting from inverse four-wave mixing in a DSF. A tunable optical filter performs wavelength selection function. By inserting a length of DSF in the laser cavity, SLM lasing can possibly be obtained when laser oscillation is stably established after traveling through the DSF many roundtrips. Stable tunable SLM oscillation with a signal-to-noise ratio as high as 65 dB over a wavelength range of about 35 nm is achieved experimentally, and each spectral linewidth is less than 6.5 kHz.     

Tunable single- and dual-wavelength erbium-doped fiber laser based on Sagnac filter with a high-birefringence photonic crystal fiber

In this paper, we observed and experimentally investigated a high-performance single- and dual-wavelength erbium-doped fiber ring laser based on a Sagnac filter which contains a section of high-birefringence photonic crystal fiber (HB-PCF) and a polarization controller. Incorporation of the high-birefringence photonic crystal fiber can suppress multimode oscillation, improve power stability and increase the optical signal-to-noise ratio (SNR). Wavelength tunable was achieved by using a polarization controller in the Sagnac filter. Highly stable single-, dual-wavelength oscillations are tunable within a wavelength range from 1550 to 1562 nm and SNR as high as 57 dB with narrow line width about 0.011 nm, is experimentally demonstrated.     

A tunable narrow-line-width multi-wavelength Er-doped fiber laser based on a high birefringence fiber ring mirror and an auto-tracking filter

A novel multi-wavelength erbium-doped fiber laser operating in C-band is proposed and successfully demonstrated. The wavelength interval between the wavelengths is about 0.22 nm. The 3 dB bandwidth of the laser is about 0.012 nm, and the output power reaches 4.8 mW. By using a high birefringence fiber ring mirror (HiBi-FLM) and a tunable FBG, the laser realizes switchable and tunable characteristic. The mode hopping can be effectively prevented. Moreover, this laser can improve wavelength stability significantly by taking advantage of an un-pumped Er³⁺-doped fiber at the standing-wave section. The laser can operate in stable narrow-line-width with single-, dual-wavelength, and unstable triple-wavelength output at room temperature.     

Stable dual-wavelength single-longitudinal-mode ring erbium-doped fiber laser for optical generation of microwave frequency

We demonstrate a simple dual-wavelength ring erbium-doped fiber laser operating in single-longitudinal-mode (SLM) at room temperature. A pair of reflection type short-period fiber Bragg gratings (FBGs), which have two different center wavelengths of 1545.072 and 1545.284 nm, are used as the wavelength-selective component of the laser. A segment of unpumped polarization maintaining erbium-doped fiber (PM-EDF) is acted as a narrow multiband filter. By turning the polarization controller (PC) to enhance the polarization hole burning (PHB), the single-wavelength and dual-wavelength laser oscillations are observed at 1545.072 and 1545.284 nm. The output power variation is less than 0.6 dB for both wavelengths over a five-minute period and the optical signal to noise ratio (OSNR) is greater than 50 dB. By beating the dual-wavelengths at a photodetector (PD), a microwave signal at 26.44 GHz is demonstrated.     

Linearly-polarized Tm-doped double-clad fiber laser

We report a linearly polarized Tm doped fiber laser. The fiber laser was set up by using a piece of polarization maintaining Tm doped double clad fiber of 5 m length as gain medium and a polarization beam splitter as a polarization selector. The fiber laser was pumped by a fiber pigtailed laser diode working at 790 nm with a maximum output power of 90 W. The linearly polarized Tm laser operated at wavelength around 2030 nm. A maximum output power up to 21.9 W was achieved when the pump power was 63.27 W with a threshold of 11.92 W, a slope efficiency of about 43.7%, and a polarization extinction ratio of 92.7% (11.37 dB). In addition to the blue fluorescence, we also observed the violet fluorescence under high pump power level. The up-conversion fluorescence was considered to be attributed to the ¹ G ₄ → ³ H ₆, and ¹ D ₂ → ³ F ₄ transitions of Tm ions, respectively.     

双包层大模场面积保偏掺镱光子晶体光纤研究

采用改进的化学气相沉积法和溶液掺杂法制备出掺镱石英光纤预制棒,以该预制棒为有源纤芯制备芯区直径约为30μm的双包层保偏掺镱光子晶体光纤.模拟计算得到该保偏光纤的模场面积约232μm2,双折射系数B为5×10-5.利用该光纤分别进行了脉冲激光和连续激光的放大测试实验,在国内首次实现了高效率的飞秒激光放大,2 m长的光子晶体光纤可得到1.64 W的激光输出,激光放大斜率效率为49.8%.同时5 m长的光纤还能够实现8.12 W的连续激光放大输出,斜率效率达到55.9%,具有较高的斜率效率.此外,该光纤消光比约10 dB,具有良好的保偏特性.     

基于Bi3+Ga3+Al3+共掺高掺铒光纤的短线腔激光器

短线腔掺铒光纤激光器由环形器(OC)、自制的Bi3+Ga3+Al3+共掺高浓度掺铒光纤(BiGaAl-EDF)、均匀光纤布拉格光栅(UFBG)和波分复用器(WDM)组成.以OC作为全反射腔镜,UFBG为波长选择性部分反射腔镜,利用1 530 nm处吸收系数为84.253 dB/m的BiGaAl-EDF为增益介质,室温下...     

Erbium-doped fiber ring laser sensor for high temperature measurements based on a regenerated fiber Bragg grating

This article presents an erbium-doped fiber ring laser for high temperature measurement with high accuracy. The proposed laser sensor employs a regenerated fiber Bragg grating (RFBG) as a sensor element. Through thermal treatments, the RFBG with enhanced thermal resistance was obtained. The laser emission optical spectrum presents good performance with a high optical signal-to-noise ratio of 58dB. Experimental results demonstrate a wavelength sensitivity to the temperature is 15.5 pm/ºC with the temperature range from 300ºC to 900ºC, and the correlation coefficient is 0.999. The results prove it is able to provide potential applications in high temperature measurement.     

基于包层旋转折变型光纤光栅的动态增益均衡器

提出并利用高频CO₂激光脉冲在普通单模通信光纤上写出了包层旋转折变型长周期光纤光栅(R-LPFG). 在分析R-LPFG波导结构和双折射特性的基础上，对光栅周期数和折变旋转度分别为50和7.2°/周期的R-LPFG进行了实验研究.结果表明，这种类型的光栅可极大地降低其谐振波长对横向负荷不同作用方向所表现出的方向相关性，并且其谐振峰幅度横向负荷灵敏度在任意方向下均高达0.37dB/(g·mm^-1) ，是普通LPFG横向负荷灵敏度的9倍左右.利用R-LPFG的温度线性响应特性和独特的横向负荷特性，设计并实验研究了一种动态增益均衡器，用其平坦掺铒光纤放大器增益谱，在C波段32nm范围内，其平坦度小于±0.5dB，可满足实际环境对通信系统的平坦应用要求. 关键词： 光纤通信技术 长周期光纤光栅 动态增益均衡 旋转折变     

近椭圆内包层高双折射偏振稳定光子晶体光纤设计及特性分析

设计了一种新型近椭圆内包层(NEIC)结构的高双折射偏振保持光子晶体光纤(PCF),并利用带有各向异性完全匹配层吸收边界条件的全矢量有限元法(FEM)对这种光纤的特性参数进行了数值分析.结果表明这种结构的光子晶体光纤在1.55μm的双折射系数高达2.0×10^-3,在长轴和短轴方向上的模场直径分别为9.2μm和2.4μm.同时当短轴方向最内层空气孔的孔径在1.30—1.18μm范围内变化时(孔径变化范围～10%),其双折射系数的劣化小于1.2×10^-5,表明这种结 关键词： 光子晶体光纤 双折射 近椭圆内包层 偏振稳定性     

新型抗弯曲大模场面积光子晶体光纤

研制出一种新型抗弯曲大模场面积石英光子晶体光纤. 利用光子晶体光纤结构设计的灵活性, 通过规划缺陷的位置及空气孔的尺寸, 实现了大模场面积单模及低弯曲损耗特性.应用建立的实际光子晶体光纤特性分析模型, 研究了研制光纤的模式特性和弯曲特性, 在波长1064 nm处, 平直状态下光纤的模场面积可以达到2812 μm², 基模限制损耗为0.00024 dB/m, 高阶模限制损耗高于1.248 dB/m. 基模和高阶模之间的高传输损耗差, 保证了在获得大模场面积的同时实现单模传输. 弯曲半径和弯曲方向角所带来弯曲损耗变化的研究结果显示, 即使在弯曲半径小到5 cm时, 弯曲损耗也在10^-3 dB/m量级以下, 而且在弯曲半径为30 cm时光纤可承受的弯曲方向角范围扩展至-60°–60°. 研制的光纤具有良好的低弯曲损耗特性, 可有效解决非对称结构所带来的光纤弯曲特性对弯曲方向角敏感的问题. 该光纤在高功率光纤激光器、放大器及高功率传输等技术领域具有重要的应用价值. 关键词： 光子晶体光纤 大模场面积 低弯曲损耗 弯曲方向角     

石英基掺Yb3+光纤中Al3+共掺特性的研究

基于实验测试结果分析了用于大功率光纤激光器的石英基包层抽运掺Yb³⁺光纤中Al³⁺共掺的特性.揭示出在高掺Yb³⁺的石英基光纤中,共掺Al³⁺的摩尔浓度为Yb³⁺摩尔浓度的9—11倍时既可以减小Yb³⁺的浓度猝灭概率,又可以获得高吸收系数,同时还可更好地满足数值孔径的要求的结论.在此基础上利用MCVD设备并结合湿法掺杂工艺制作出多根石英基掺Yb³⁺光纤预制棒,对拉丝后光纤的相关参数测试表明,通过精确控制疏松层的沉积温度,掺Yb³⁺光纤在976 nm波长的吸收系数可高达620 dB/m,且重复性好.这一结论为共掺Al³⁺的掺Yb³⁺光纤制作提供了良好的借鉴作用. 关键词： 3+光纤')" href="#">石英基掺Yb³⁺光纤 3+共掺')" href="#">Al³⁺共掺 吸收系数 浓度猝灭     

Photonic generation of microwave signal using a dual-wavelength single-longitudinal-mode distributed Bragg reflector fiber laser

In this paper, a novel all-optical microwave generation technique based on a dual-wavelength single-longitudinal-mode (SLM) distributed Bragg reflector (DBR) fiber laser is proposed and demonstrated. By exploiting spatial hole burning (SHB) effect, this laser could provide stable dual-wavelength SLM operation with a wavelength separation of 0.088 nm corresponding to the microwave signal at 10.484 GHz with a 3 dB bandwidth of 28 kHz. By appropriately adjusting the pump power, dual-wavelength oscillation could be maintained at different temperatures. We have theoretically analyzed the mechanism for microwave generation of the proposed DBR laser, and the calculated microwave frequency is in good agreement with our experimental results. Furthermore, experimental observation shows both of the laser wavelengths and generated microwave signals have good stability at room temperature.     

Single-longitudinal-mode erbium-doped fiber laser with novel scheme utilizing fiber Bragg grating inside ring cavity

In this paper, we experimentally investigate a single-longitudinal-mode (SLM) S-band erbiumdoped fiber (EDF) laser with dualring scheme using a S-band fiber Bragg grating (FBG) inside the gain cavity to restrict the lasing mode. The proposed laser is constructed by two-ring cavities serving as the mode filters. The FBG inside the proposed laser scheme can retrieve the SLM operation. Moreover, the output performance of the proposed fiber laser is also analyzed and discussed.