Domino 6pi-electrocyclization/Diels-Alder reactions on 1,6-disubstituted (E,Z,E)-1,3,5-hexatrienes: versatile access to highly substituted tri- and tetracyclic systems

The (E,Z,E)-1,3,5-hexatrienes 1a, 2a,b and 3b undergo 6pi-electrocyclization within 15-30 min upon heating to 200-215 degrees C. While the cyclohexene-annelated products 8a,b were stable, the analogous cyclopentene- and cycloheptene-annelated derivatives 7a and 9b easily underwent dehydrogenation to the corresponding aromatic compounds 10a and 12b during the work-up. The cyclohexadiene derivatives 8a,b were employed in thermal Diels-Alder reactions with 4-phenyl-3H-1,2,4-triazoline-3,5-dione (PTAD) and tetracyanoethylene (TCNE) to give the expected [4+2] cycloadducts 13a and 14a in good yields (60 and 78%). The initially formed cycloadduct of 8a and dimethyl acetylenedicarboxylate (DMAD) underwent a subsequent retro-Diels-Alder reaction to give the tetrahydronaphthalene 11b (47%). Under high pressure (10 kbar), the cycloadduct 15a was formed at room temperature and could be isolated in 44% yield. TCNE and N-phenylmaleimide with 8a under high pressure also led to the [4+2] cycloadducts 14a and 16a in good yields (60 and 77%). The 6pi-electrocyclization and subsequent Diels-Alder reaction, when performed as a one-pot domino process, provided direct access to Diels-Alder products of intermediately formed 6pi-electrocyclization products, for example from the 1,3,5-hexatrienes 1a,b, 2a,b, 3b and TCNE to the corresponding tricyclic products 17a,b, 14a,b, 18b in moderate to good yields (27-80%) depending on the nature of the alkoxycarbonyl group. Such sequential reactions with N-phenylmaleimide, maleic anhydride, dimethyl maleate and fumarodinitrile, the latter two under high pressure (10 kbar), worked as well to yield 16b (70%), 19a,b (19, 32%) and 20b (39%) and 21b (76%), respectively. With PTAD, however, the hexatrienes 2a,b reacted at ambient temperature without 6pi-electrocyclization to give the formal [4+2] cycloadducts 27a,b (48 and 46%), most probably via zwitterionic intermediates 23a,b and 25a,b.     

An efficient access to novel enantiomerically pure steroidal delta-amino acids

A highly chemoselective sequence of Stille and Heck couplings on the heterocyclic bromoenol triflates 2 a-c with the bicycloalkenylstannanes cis-3 and trans-3 furnished the intermediate bromobutadienes 4 a-c in good yields ranging from 73-94 %. A modified Heck coupling protocol employing the palladacycle 8 and an additional bidentate ligand such as 1,4-bis(diphenylphosphinyl)butane allowed a significant reduction in catalyst loading while still obtaining the heterocyclic 1,3,5-hexatrienes 5 a-c in good yields (71-94 %). The unsymmetrically substituted 1,3,5-hexatrienes 5 a-c in solution underwent 6pi-electrocyclizations following an optimized microwave-heating protocol to yield the steroidal tetracycles cis-7 a-c and trans-7 b (59-69 %). Tetracycles cis-7 a-c are the products of a subsequent 1,5-hydrogen shift to the thermodynamically more stable, more highly substituted diene units. Removal of the tert-butyl groups provided the novel steroidal delta-amino acid 9 a and the delta-amino acid derivatives 9 b, c in good yields (76-86 %).     

Crystalline-state Z,E-photoisomerization of a series of (Z,E,Z)-1,6-diphenylhexa-1,3,5-triene 4,4'-dicarboxylic acid dialkyl esters. Chain length effects on the crystal structure and photoreactivity

[reaction: see text] Crystalline-state Z,E-photoisomerization of a series of (Z,E,Z)-1,6-diphenylhexa-1,3,5-triene 4,4'-dicarboxylic acid dialkyl (R) esters [(Z,E,Z)-1a, R = Me; (Z,E,Z)-1b, R = Et; (Z,E,Z)-1c, R = n-Pr; (Z,E,Z)-1d, R = n-Bu] was investigated. All Z,E,Z isomers underwent one-way isomerization to the corresponding E,E,E isomers. The reaction efficiency was strongly enhanced as the length of the alkyl chain increased. Single-crystal X-ray analyses of (Z,E,Z)-1a-d showed that the alkyl chain part of the crystals became larger as the chain length increased. The conformational flexibility of the alkyl chains made the large change in the triene geometry in the lattice possible, leading to the enhancement of the photoreactivity in the crystalline state.     

"Dimers" and "trimers" of tetrahydroindenes and hexahydroazulenes, respectively generated from [2-(1-cycloalkenyl)ethynyl]carbene complexes (M = W, Cr) by cascade cyclization/cycloaddition reactions

A cascade of cyclization/cycloaddition reactions was triggered by addition of protic oxygen nucleophiles ROH 2 (RO = CH3CO2, PhCO2, PhO) to [2-(1-cyclohexenyl)ethynyl]carbene complexes 1b and 1c (M=W, Cr, respectively), affording highly strained "dimers" 11/11' and "trimers" 12 of the carbene ligand. The first reaction step involved the formation of 1-metalla1,3,5-hexatrienes 7, which readily gave tetrahydroindenes 8 by pi cyclization and extrusion of the metal unit. "Dimers" 11/11' were generated from tetrahydroindenes 8 by a highly exo selective [4+2] cycloaddition of compounds 1b and 1c to afford 1-metalla-1,3,5-hexatriene intermediates 9, and a spontaneous pi cyclization of the latter compounds involving the disengagement of the metal unit. Propenylidene cyclohexenes 13/13' were formed in "ene"-type side reactions to the pi cyclization of 1-metalla-1,3,5-hexatrienes 7, by loss of the metal unit. "Dimers" 11 were transformed into "trimers" 12 by a [4+2] cycloaddition and subsequent pi-cyclization of the resulting 1-metalla-1,3,5-hexatriene system. The course of the reaction was elucidated by means of model reactions with (2-phenylethynyl)carbene complex 14, in which 1-metalla-1,3,5-hexatriene intermediates 16 and 17 were isolated and characterized. Alkynyl benzene derivatives 19 were obtained by an unprecedented ring-expansion of a cyclopentadiene unit of "dimers" 11a and 11c, involving the insertion of a carbene carbon atom of compound 14 into a C=C bond. A reaction cascade leading to "dimers" 24/24' could also be triggered by treatment of compounds 2 with [2-(1-cycloheptenyl)ethynyl]carbene tungsten complex 1d.     

Highly stereoselective 6pi electrocyclization of bridged bicyclic 1,3,5-trienes

Conjugated 1,3,5-hexatrienes encased in bridged bicyclic skeletons are prepared by cross-coupling followed by half-reduction of the resulting dienynes. The trienes undergo 6pi electrocyclization at an ambient or elevated temperature to furnish complex, polycyclic cyclohexadienes. In all cases, complete selectivity in favor of cyclization from the exo face of the bridged bicyclic system was seen, in contrast to the corresponding 4pi Nazarov cyclizations.     

Formal and standard ruthenium-catalyzed [2 + 2 + 2] cycloaddition reaction of 1,6-diynes to alkenes: a mechanistic density functional study

"Formal" and standard Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes 1 to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. The neutral Ru(II) catalyst was formed in situ by mixing equimolecular amounts of [Cp*Ru(CH3CN)3]PF6 and Et4NCl. Two isomeric bicyclic 1,3-cyclohexadienes 3 and 8 were obtained depending on the cyclic or acyclic nature of the alkene partner. Mechanistic studies on the Ru catalytic cycle revealed a clue for this difference: (a) when acyclic alkenes were used, linear coupling of 1,6-diynes with alkenes was observed giving 1,3,5-trienes 6 as the only initial reaction products, which after a thermal disrotatory 6e-pi electrocyclization led to the final 1,3-cyclohexadienes 3 as probed by NMR studies. This cascade process behaved as a formal Ru-catalyzed [2 + 2 + 2] cycloaddition. (b) With cyclic alkenes, the standard Ru-catalyzed [2 + 2 + 2] cycloaddition occurred, giving the bicyclic 1,3-cyclohexadienes 8 as reaction products. A complete catalytic cycle for the formal and standard Ru-catalyzed [2 + 2 + 2] cycloaddition of acetylene and cyclic and acyclic alkenes with the Cp*RuCl fragment has been proposed and discussed based on DFT/B3LYP calculations. The most likely mechanism for these processes would involve the formation of ruthenacycloheptadiene intermediates XXIII or XXVII depending on the alkene nature. From these complexes, two alternatives could be envisioned: (a) a reductive elimination in the case of cyclic alkenes 7 and (b) a beta-elimination followed by reductive elimination to give 1,3,5-hexatrienes 6 in the case of acyclic alkenes. Final 6e-pi electrocyclization of 6 gave 1,3-cyclohexadienes 3.     

Addition of the phenoxathiin cation radical to alkenes and nonconjugated dienes. Formation of (E)- and (Z)-(10-phenoxathiiniumyl)alkenes and (E)- and (Z)-(10-phenoxathiiniumyl)dienes on basic alumina

Addition of phenoxathiin cation radical (PO*+) to acyclic alkenes in acetonitrile (MeCN) solution occurred stereospecifically to form bis(10-phenoxathiiniumyl)alkane adducts. Stereospecific trans addition is ascribed to the intermediacy of an episulfonium cation radical. The alkenes used were cis- and trans-2-butene, cis- and trans-2-pentene, cis- and trans-4-methyl-2-pentene, cis- and trans-4-octene, trans-3-hexene, trans-3-octene, trans-5-decene, cis-2-hexene, and cis-2-heptene. The erythro bisadducts (compounds 6) were obtained with trans-alkenes, while threo bisadducts (compounds 7) were obtained with cis-alkenes. The assigned structures of 6 and 7 were consistent with their NMR spectra and, in one case, 6c (the adduct of trans-4-methyl-2-pentene) was confirmed with X-ray crystallography. Additions of PO*+ to 1,4-hexa-, 1,5-hexa-, 1,6-hepta-, and 1,7-octadiene gave bis(10-phenoxathiiniumyl)alkenes (compounds 8), the assigned structures of which were consistent with their NMR spectra. Each of these adducts lost a proton and phenoxathiin (PO) when treated with basic alumina in MeCN solution. Compounds 6 (from trans-alkenes) gave mixtures of (Z)- (9) and (E)-(10-phenoxathiiniumyl)alkenes (10) in which the (Z)-isomers (9) were dominant. On the other hand, compounds 7 (from cis-alkenes) gave mixtures of 9 and 10 in which, with one exception (the adduct 7c of cis-4-methyl-2-pentene), compounds 10 were dominant. The path to elimination is discussed. The alkenes 9 and 10 were characterized with NMR spectroscopy and, in one case (9a), with X-ray crystallography. Reactions of 8b-d with basic alumina gave mixtures of (E)- (13) and (Z)-(10-phenoxathiiniumyl)dienes (14), in which compounds 13 were dominant. The configuration of the product from 8a (the adduct of 1,4-hexadiene) could not be settled. Noteworthy features in the coupling patterns and chemical shifts in the NMR spectra of some of the adducts and their products are discussed and related to adduct conformations.     

Diarylamino groups as photostable auxofluors in 2-benzoxazolylfluorene, 2,5-diphenyloxazoles, 1,3,5-hexatrienes, 1,4-distyrylbenzenes,and 2,7-distyrylfluorenes

The relationship of structure to optical spectral properties was determined for five types of fluors in a search for an optimum-wavelength shifter to be used as part of the detection systems for high-energy particles from accelerators. In a search for photostable fluors to serve as waveshifters in plastic fibers it was found that the wavelengths of interest, absorption max 410 +/- 10 nm and fluorescence emission max 480 +/- 20 nm, along with other properties, such as high solubility and short fluorescence decay time, could be obtained from fluorophors composed of aromatic rings and vinyl groups only by using amino groups as auxochromes to give bathochromic shifts of wavelengths. Since primary, monoalkyl, and dialkylamino groups were not sufficiently photostable, a number of fluorophores bearing diarylamino groups were investigated. Syntheses of the fluors made use of the Buchwald amination, an improved version of the Emmons-Horner reaction, and other common reactions. The fluor types were the following: a 2-benzoxazolyl-7-(4-diarylamino)fluorene 7, 2-(4-cyanophenyl)-5-(4-aminophenyl)oxazoles 14 and 20, 1,3,5-hexatrienes 24a-d and 26a-c, 1,4-distyrylbenzenes 31d-g and 32a-e, and 2,7-distyrylfluorenes 40a,d-e. The unsymmetrical fluors 7, 14, and 20 were not as bright as the best hexatrienes, distyrylbenzenes, and distyrylfluorenes, which were all symmetrical. Where the 1,6-diaryl-1,3,5-hexatrienes 24a-d had high fluorescence quantum yield (Phi(f)), the 1,1,6,6-tetraryl-1,3,5-hexatrienes 26a-c had both lower epsilon and Phi(f). Where the 1,4-distyrylbenzenes 31d-g had high Phi(f), the 1,4-bis(2-phenylstyryl)benzenes 32a-e had Phi(f) = 0. Diarylamino groups as auxofluors conferred higher photochemical stability than dialkylamino groups on similar fluorophores. The 1,4-distyrylbenzenes 31d,e and the 2,7-distyrylfluorenes 40d,ehad the most desirable properties overall, which included fast decay times of 2 ns. Computer simulations predicted absorption and emission wavelengths fairly well, but were of little help for the prediction of brightness, stability, Phi(f), or decay time.     

共轭三烯及Galbanolenes的立体选择性合成

通过修饰改造的Ramberg-Backlund反应,(E,E)-,(E,Z)-,(Z,Z)-二烯丙基砜(6)在CBr~2F~2存在下,用KOH/Al~2O~3处理,选择性地生成(E,E,E)-,(E,E,Z)-,(Z,E,Z)-1,3,5-己三烯(7),反应的立体选择性依赖于溶剂和温度,通常在0℃时用CH~2Cl~2作溶剂可达到良好的(E)-选择性,有些时候在-78℃以下,以V(t-BuOH):V(CBr~2F~2)=1:1作为混合溶剂时(E)-选择性更好,该新方法被用于天然产物Galbanolenes(7m)和(7n)的合成中。     

First synthesis and isolation of the E- and Z-isomers of some new Schiff bases. Reactions of 6-azido-5-formyl-2-pyridone with aromatic amines

Some novel Schiff bases have been prepared by reacting 6-azido-5-formyl-2-pyridone 1 with a series of aromatic amines 2a-f. 5-Arylaminomethylene-6-(E)-aryl-iminopyridones 3a-e were obtained by reaction of 1 with 2a-e at room temperature, whereas with 2f, the 6-azido-5-naphthalen-2-yl-iminomethylpyridone derivative 4 was formed. On the other hand, heating 1 with 2a-d at 140-150 degrees C yielded two sets of isomeric products, (E)-3a-d and (Z)-5a-d. Refluxing compounds (Z)-3a,c with hydroxyl-amine in methanol gave the corresponding hydroxyliminopyridones 8a,c. Heating of (E)-3a-d with excess POCl3 at reflux did not give the expected tricyclic compound 9, but rather the isomeric products (Z)-5a-d were obtained. The structures of all these products have been characterized using IR and 1H- and 13C-NMR spectroscopy.     

Fluorinated diphenylpolyenes: crystal structures and emission properties

(E,E,E)-1,6-Diaryl(Ar)-1,3,5-hexatrienes (2, Ar = 4-fluorophenyl; 3, Ar = 2,4-difluorophenyl; 4, Ar = 2,4,6-trifluorophenyl; 5, Ar = perfluorophenyl) and (E,E,E)-1-perfluorophenyl-6-phenyl-1,3,5-hexatriene (6) were prepared. The absorption and fluorescence spectra in methylcyclohexane solution showed only a small dependence on the fluorine ring substituent, and were similar to those of the unsubstituted parent compound (1, Ar = phenyl). The solid-state absorption and fluorescence spectra shifted to red relative to those in solution and strongly depended on the substituent. The emission from crystals 1-5 originated mainly from monomeric species with the maximum wavelength (lambda f(max)) of 440-465 nm, which overlapped the emission from molecular aggregates (1-4) or excimeric species (5) in the red region. Crystal 6 exhibited red-shifted (lambda f(max) = 530 nm) and structureless emission due to excimers. The cocrystal of 1 and 5 (1/5) showed red-shifted (lambda f(max) = 558 nm) and distinctly structured emission, not from exciplexes but from the excited states of molecular aggregates in which molecules 1 and 5 strongly interact already in the ground state. These assignments were confirmed by the results of fluorescence lifetime and quantum yield measurements in the solid state. Single-crystal X-ray structure analyses showed that the molecules were basically planar in each crystal, whereas the crystal packing was strongly substituent-dependent. Weak pi-pi interactions in the herringbone (1 and 2) and in the pi-stacked but largely offset structures (3 and 4) account for their predominantly monomeric origin of emission. The observation of excimer fluorescence from 5 was rather unexpected, since the molecules in this crystal were arranged in an offset stacking fashion due to perfluorophenyl-perfluorophenyl (C6F5...C6F5) interaction. The structures of 6 and 1/5 considerably resembled each other, in which molecules were pi-stacked with more face-to-face geometries than those in 5, as a result of strongly attractive perfluorophenyl-phenyl (C6F5...C6H5) interaction. Nevertheless, the fluorescence origin was clearly different for 6 and 1/5. This can be ascribed to the difference in the strength of orbital-orbital interaction between molecular pi-planes in the ground and excited states in crystals.     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

A new Ru-catalyzed cascade reaction forming polycyclic cyclohexadienes from 1,6-diynes and alkenes

Functionalized bicyclic 1,3-cyclohexadienes can be easily prepared by a new cascade reaction which involves the Ru-catalyzed addition of acyclic alkenes to 1,6-diynes to give (Z)-hexatrienes, followed by a pure thermal 6e-pi electrocyclization.     

Peri- and enantioselectivity of thermal, scandium-, and [pybox/scandium]-catalyzed Diels-Alder and hetero-Diels-Alder reactions of methyl (E)-2-oxo-4-aryl-butenoates with cyclopentadiene

The cycloaddition between methyl (E)-2-oxo-4-aryl-3-butenoates (2 a-d) and cyclopentadiene, in addition to the expected normal Diels-Alder (DA) adducts endo-3 a-d and exo-4 a-d, gives the less expected endo-5 a-d products of the [4+2] hetero-Diels-Alder (HDA) reaction in which the alpha-ketoester behaves as a heterodiene. If a comparison is made between the thermal and the scandium(III) triflate-catalyzed conditions, the periselectivity changes and whereas under thermal conditions the main products are those from the DA reaction (3 a-d), in the presence of Sc(OTf)3 (OTf=triflate), the HDA products 5 a-d become largely predominant. The reactions are enantioselectively catalyzed by the scandium(III) triflate complex of (4'S,5'S)-2,6-bis[4'-(triisopropylsilyl)oxymethyl-5'-phenyl-1',3'-oxazolin-2'-yl]pyridine (1) and both the DA and the HDA products are obtained with excellent enantiomeric excess, up to >99% ee. The X-ray crystallographic structure determination of 5 c assigns it the 4R,4aS,7aR absolute configuration. The thermal retro-Claisen rearrangement of 3 c into (4R,4aS,7aR)-5 c allows the correlation of their absolute configuration, and 3 c has therefore the 2R,3R configuration. By analogy the same absolute configuration can be assigned to 3 a,b,d and 5 a,b,d, and the stereospecific thermal Claisen rearrangement of the optically active 5 a,b,d into 3 a,b,d completes the correlation between their absolute configuration. The [3,3]-sigmatropic rearrangements can be easily carried out under catalytic conditions with scandium(III) triflate, which promotes the equilibration between 3 a-d and 5 a-d, with a different degree of enantioselectivity characterizing the process starting from 3 a-d or 5 a-d. The unambiguous attributions of the configuration to the products allows us to propose a rationale of the stereochemical outcome of the catalyzed cycloaddition and to investigate the reaction mechanism of the competing DA and HDA reactions and shifts in products distribution by acid catalysis.     

Concise syntheses of cystothiazoles A, C, D, and melithiazol B

A convergent synthesis of cystothiazoles C 1 and D 3 was achieved based on Julia coupling between the functionalized aldehyde 5b, corresponding to left half of the final molecule, and aryl sulfone 6 or 7, bearing a bithiazole moiety, corresponding to right half. Methylation of 1 and 3 gave cystothiazole A 2 and melithiazol B 4, respectively. The overall yield (5 steps from (2R,3S)-3-methylpent-4-yne-1,2-diol 10; 57%) of 5b via the present route was improved in comparison to that of the previously reported functionalized aldehyde 5a (7 steps from 10; 13%). By applying the modified Julia coupling method, selectivity (6E/6Z=20 : 1-26 : 1) toward the (6E)-form of the coupled products (15 or 19) against the corresponding (6Z)-form was improved in comparison to the Wittig method (6E/6Z=4 : 1-6.9 : 1).     

Synthesis of (Z)- and (E)-3,4-Dimethyl-hex-3-ene-1,6-diols

(Z)- and (E)-3,4-dimethyl-hex-3-ene-1,6-diols (1 and 2) have been synthesized in 23% and 68% yields by a three step sequence requiring only one purification at the end. The steps are a) coupling of 2-lithio-1,3-dithiane with (Z)- or (E)-1,4-dibromo-2,3-dimethyl-but-2-ene (3 or 4), b) hydrolysis of the thioketals (8 and 9) with methyl iodide in a mixture of acetonitrile, acetone and water to give the 3,4-dimethyl-hex-3-ene-1,6-diols (10 and 11) and c) reduction with diisobutylaluminum hydride to provide the (Z)- and (E)-diols.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.     

Cobalt‐Mediated Linear 2:1 Co‐oligomerization of Alkynes with Enol Ethers to Give 1‐Alkoxy‐1,3,5‐Trienes: A Missing Mode of Reactivity

A variety of 1,6‐heptadiynes and certain borylalkynes co‐oligomerize with enol ethers in the presence of [CpCo(C₂H₄)₂] (Cp=cyclopentadienyl) to furnish the hitherto elusive acyclic 2:1 products, 1,3,5‐trien‐1‐ol ethers, in preference to or in competition with the alternative pathway that leads to the standard [2+2+2] cycloadducts, 5‐alkoxy‐1,3‐cyclohexadienes. Minor variations, such as lengthening the diyne tether, cause reversion to the standard mechanism. The trienes, including synthetically potent borylated derivatives, are generated with excellent levels of chemo‐, regio‐, and diastereoselectivity, and are obtained directly by decomplexation of the crude mixtures during chromatography. The cyclohexadienes are isolated as the corresponding dehydroalkoxylated arenes. In one example, even ethene functions as a linear cotrimerization partner. The alkoxytrienes are thermally labile with respect to 6π‐electrocyclization–elimination to give the same arenes that are the products of cycloaddition. The latter, regardless of the mechanism of their formation, can be viewed as the result of a formal [2+2+2] cyclization of the starting alkynes with acetylene. One‐pot conditions for the exclusive formation of arenes are developed. DFT computations indicate that cyclohexadiene and triene formation share a common intermediate, a cobaltacycloheptadiene, from which reductive elimination and β‐hydride elimination compete.     

Synthesis, Crystal Structure and Fungicidal Activity of 3- ( 4- Chloro- 3- ethyl- 1 -methyl- 1 H- pyrazol- 5-yl ) - 6- (E) phenylvinyltriazolo [ 3, 4-b ] - 1,3, 4-thiadiazole

1　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｒｅｃｅｎｔｙｅａｒｓ ,ｔｒｉａｚｏｌｏ[3,4, ｂ] 1 ,3,4 ｔｈｉａｄｉａｚｏｌｅｄｅｒｉｖａｔｉｖｅｓｈａｖｅｂｅｅｎａｔ ｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎｆｒｏｍｃｈｅｍｉｓｔｓａｎｄｐｈａｒｍａｃｏｌｏｇｉｓｔｓｂｅｃａｕｓｅｔｈｅｙｓｈｏｗｂｒｏａｄｓｐｅｃｔｒａｏｆｂｉｏｌｏｇｉｃａｌａｃｔｉｖｉｔｉｅｓ,ｓｕｃｈａｓｉｎｓｅｃｔｉｃｉｄａｌ[1 ] ,ａｎｔｉｆｕｎｇａｌ[2 ] ,ｈｅｒｂｉｃｉｄａｌ[3] ,ａｎ ｔｉｂａｃｔｅｒｉａｌ[4] ,ｈｙｐｏｔｅｎｓｉｖ…     

Macrocycles with 1,2-dicyano-1,2-dithioethene units

Abstract

The new unsaturated macrocyclic tetrathioethers (Z,Z)-4 (n = 0), (Z,Z)-5 (n = 1), (Z,Z)-6 (n = 2) and (Z,Z)-7 (n = 3) were synthesized by the cyclization of (Z)-disodium-1,2-dicyanoethene-1,2-dithiolate (Z)-3 with ω,ω'-dibromoalkanes BrCH₂CH₂(CH₂)nCH₂Br (n = 0;1;2;3) on refluxing in dioxane in yields up to 15%. By reaction of the dithiolate (Z)-3 with 1,3-dibromopropane the unsaturated hexathioether (Z,Z,Z)-6 was also obtained. By the cyclization of dithiolate (Z)-3 with 1,5-dibromopentane and 1,6-dibromohexane the (Z,E)- and (E,E)-isomers, respectively, were formed in addition to the (Z,Z)-isomers. The (E,E)- and (Z,E)-isomers are photochemically convertable to the corresponding themodynamically more stable (Z,Z)-isomers by irradiation with UV-light. The (E,E)-isomers can be synthesized in a straightforward manner using the (E)-disodium-1,2-dicyanoethene-1,2-dithiolate (E)-3. Crystal structures of (Z,Z)-5, (Z,Z)-6, (E,E)-6, (Z,E)-7 and (E,E)-7 are reported.