Interaction of carbon monoxide with In<Subscript>2</Subscript>O<Subscript>3</Subscript> and In<Subscript>2</Subscript>O<Subscript>3</Subscript>-Au nanocomposite

This is an IR spectroscopic study of the interaction of CO with In₂O₃ and the nanocomposite In₂O₃-Au. A mechanism for low-temperature detection of CO on nanocomposite In₂O₃-Au can be determined from these data. This process includes catalytic oxidation of CO through formation of intermediate complexes involving hydroxyl groups of In₂O₃.     

One-step synthesis of colloidal Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles at room temperature

A facile room-temperature synthesis has been developed to prepare colloidal Mn₃O₄ and γ-Fe₂O₃ nanoparticles (5 to 25 nm) by an ultrasonic-assisted method in the absence of any additional nucleation and surfactant. The morphology of the as-prepared samples was observed by transmission electron microscopy. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The magnetic properties of the samples were investigated with a superconducting quantum interference device magnetometer. The possible formation process has been proposed.     

Structural investigation on PEO-based polymer electrolytes dispersed with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

Thin solid polymer electrolytes based on polyethylene oxide (PEO) and silver triflate (AgCF₃SO₃) dispersed with various concentrations of aluminum oxide (Al₂O₃) nanoparticles have been prepared by solution casting technique. These thin polymer films are found to have thickness of the order of 30 to 100 μm. The X-ray diffraction (XRD) patterns have indicated the amorphous nature of the polymer electrolyte. The differential scanning calorimeter (DSC) traces showed slight change in the glass transition temperature (T _g) whereas the degree of crystallization (X _c) decreases markedly due to the addition of alumina nanoparticles. Fourier transform infrared (FTIR) spectral analysis of all these samples has revealed the presence of absorption bands around 1,000 cm⁻¹; thus indicating the complexation of silver ions with oxygen in PEO. Employing the Wagner’s polarization technique as the standard method, the total ionic transference number for the complexed polymer electrolyte was found to be approximately unity thereby revealing that the significant contribution to electrical conduction was due to ions only. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006     

Gas sensor based on nanosize In<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> film

Nanosize films of In₂O₃:Ga₂O₃ (96:4 weight %) have been deposited on a glassceramic substrate by the method of rf magnetron sputtering. The surfaces of fabricated films were studied with use of a scanning electron microscope; sizes of grains were determined and the thicknesses of films were measured. In order to prepare a gas-sensitive structure, a thin catalytic palladium layer and ohmic comb contacts were deposited on the In₂O₃:Ga₂O₃ film surface by the method of ion-plasma sputtering. The sensitivity of sensors based on the glassceramic/In₂O₃:Ga₂O₃ (96:4 weight %)/Pd structure to different concentrations of propane and butane gas mixture, as well as to methane was investigated at temperatures of working substance from 250 to 300°C.     

Effect of thermal treatment on the electrotransport properties of thin-film In<Subscript>2</Subscript>O<Subscript>3</Subscript>, ZnO materials and the multilayer (In<Subscript>2</Subscript>O<Subscript>3</Subscript>/ZnO)<Subscript>83</Subscript> heterostructure

The effect heat treatment has on the electrotransport mechanisms in films of ZnO and In₂O₃, and in a multilayer (In₂O₃/ZnO)₈₃ structure obtained via ion-beam sputtering, is studied. It is shown that there is a mechanism of weak electron localization in the In₂O₃ and (In₂O₃/ZnO)₈₃ samples. The relaxation processes that occur during the heat treatment of In₂O₃ films are found to increase the length of elastic electron scattering, but to reduce this parameter in multilayer heterostructures.     

Tuning electronic properties of In<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires by doping control

We present two effective routes to tune the electronic properties of single-crystalline In₂O₃ nanowires by controlling the doping. The first method involves using different O₂ concentrations during the synthesis. Lightly (heavily) doped nanowires were produced by using high (low) O₂ concentrations, respectively, as revealed by the conductances and threshold voltages of nanowire-based field-effect transistors. Our second method exploits post-synthesis baking, as baking heavily doped nanowires in ambient air led to suppressed conduction and a positive shift of the threshold voltage, whereas baking lightly doped nanowires in vacuum displayed the opposite behavior. Our approaches offer viable ways to tune the electronic properties of many nonstoichiometric metal oxide systems such as In₂O₃, SnO₂, and ZnO nanowires for various applications. PACS 85.35.-p     

Methane sensor based on SnO<Subscript>2</Subscript>/In<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> nanostructure

Two sets of samples of SnO₂/In₂O₃/TiO₂ system have been fabricated with different concentrations of component materials. In the first set TiO₂ with rutile structure was used, while in the second set it has the structure of anatase. Thin films (up to 50 nm) of obtained mixtures were deposited. Their sensitivity and selectivity with respect to methane (CH4) were studied. Nanostructure on the basis of 70%SnO₂ — 10%In₂O₃ — 20%TiO₂(anatase) exhibits sufficient sensitivity to methane.     

Magnetic State of Iron Impurity Ions in In<Subscript>2</Subscript>O<Subscript>3</Subscript>

X-ray photoelectron spectroscopy and electronic structure calculations in the framework of the coherent potential approach show that impurity Fe³⁺ ions substituting In in iron-doped In₂O₃ indium oxide(III) are in a paramagnetic state in the absence of oxygen vacancies.     

Vibrational dynamics of the organometallic compound triarylorganoantimony (V) SbPh<Subscript>3</Subscript>[O<Subscript>2</Subscript>CC(OH)Ph<Subscript>2</Subscript>]<Subscript>2</Subscript>

A complete normal coordinate analysis was performed for five-coordinate non-rigid triarylantimony diester SbPh₃(O₂CR)₂, known to be a bioactive molecule, using Wilson G-F matrix method and Urey Bradley force field. The study of vibrational dynamics was performed using the concept of group frequencies and band intensities.      

Preparation and investigation of composite SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> films

SiO₂-TiO₂ films [Si:Ti = 1:(0.06–2.3)] are obtained by the sol-gel method. The structural and photoluminescent properties of the films and powders heat-treated at different temperatures are studied. It is shown that after 700°C the composite consists of TiO₂ crystallites that are structurally similar to anatase and distributed in an amorphous SiO₂ matrix. The photoluminescence spectra have maxima at 450–500 nm. The photoluminescence intensity depends on the treatment temperature and TiO₂ content. __________ Translated from Zhurnal Prikladnoi Spektroskopii Vol. 74, No. 3, pp. 357–361, May–June, 2007.     

Sinter-active nanocrystalline CeO<Subscript>2</Subscript> powder prepared by a mixed fuel process: Effect of fuel on particle agglomeration

A modified combustion process, namely a mixed fuel process making use of a mixture of two fuels, such as citric acid and glycine has been developed to prepare nanocrystalline ceria powders. The effect of the mixed fuel and the different fuel to oxidant ratios on the decomposition characteristics of the gels were investigated by simultaneous thermal analysis experiments. It was established from various characterization techniques that the ceria powder prepared through the mixed fuel process has got the optimum powder characteristics, namely, a surface area of 33.33 m²/g and a crystallite size of 14 nm compared to the powders produced through the combustion process using a single fuel like glycine or citric acid. Such powders when sintered at 1250°C resulted in pellets with densities in the range of 94–96% of theoretical density. In this paper, we have carried out systematic studies on the sintering of ceria powders prepared by different approaches. The sintered ceramic from mixed fuel batch, exhibited and retained relative density more than 95% up to 1250°C and this data clearly underscores the ability of this process in developing ceria ceramics with increased stability against reduction.     

Synthesis and characterization of hollow nanoparticles of crystalline Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>

Although Gd₂O₃ (gadolinia) nanoparticle is the subject of intense research interest due to its magnetic property as well as controllable emission wavelengths by doping of various lanthanide ions, it is known to be difficult to prepare monodisperse crystalline gadolinia nanoparticles because it requires high temperature thermal annealing process to enhance the crystallinity. In this article, we demonstrate the synthesis of hollow nanoparticles of crystalline Gd₂O₃ by employing poly(N-vinylpyrrolidone) (PVP) to stabilize the surface of Gd(OH)CO₃·H₂O nanoparticles and to successively form SiO₂ shell as a protecting layer to prevent aggregation during calcinations processes. Silica shells could be selectively removed after calcinations by a treatment with basic solution to give hollow nanoparticles of crystalline Gd₂O₃. The formation mechanism of hollow nanoparticles could be suggested based on several characterization results of the size and shape, and crystallinity of Gd₂O₃ nanoparticles by TEM, SEM, and XRD.     

Mechanism of thermal decomposition of the nonstoichiometric compound YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6.8</Subscript>

Thermal decomposition of the nonstoichiometric high-temperature superconductor YBa₂Cu₃O_6.8 at a temperature of 200°C in air has been investigated using the full-profile analysis of X-ray diffraction lines. Two mechanisms of decomposition are revealed. The first mechanism, i.e., separation into two phases with a different oxygen content, occurs continuously. The second mechanism, i.e., disordering of the heavy atoms Y, Ba, Ba, Y along the crystallographic axis c, begins to occur after a 20- to 35-h annealing and progresses with a further annealing.     

Hydrothermal synthesis and magnetic properties of CuSb<Subscript>2</Subscript>O<Subscript>6</Subscript> nanoparticles and nanorods

Nanoparticles and nanorods of CuSb₂O₆ are prepared by hydrothermal method and its high temperature α-phase is stabilized at room temperature. The average size of the nanoparticles is ca. 13.7 nm. The nanorods, with a width of ca. 20 nm and an aspect ratio of ca. 5, are the agglomerates composing of smaller nanoparticles with an average size of ca. 8.3 nm. Compared with the high temperature α-phase of bulk sample at 400 K, the lattice of nanophases elongated in ab plane and compressed along c direction. The CuSb₂O₆ nanoparticles exhibit predominant paramagnetic phenomenon. The difference in magnetic properties of the nanoparticles and nanorods indicates the interfacial interaction of agglomerated nanoparticles.     

Evolution in shapes of a series of (111)-based In<Subscript>2</Subscript>O<Subscript>3</Subscript> particles

In₂O₃ particles with different morphology were controllably synthesized on silicon substrates by thermal evaporation of In grains at 900 °C. The structure and morphology of the In₂O₃ particles were evaluated using X-ray diffraction, and scanning and transmission electron microscopies. The evolution in shapes as the ratio of {100} relative to {111} increases is clearly observed. The photoluminescence spectrum of the obtained In₂O₃ structures exhibits UV emission centered at about 378 nm and wide-band emission covering the green and orange regions with three peaks around 525, 572, and 604 nm. PACS 81.05.Hd; 81.07.Bc; 81.16.-c; 61.46.-w; 81.40.Gh     

Holographic recording media based on polymer compositions with Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>, ZnO,and CdS nanoparticles

We investigated the influence of additions of Fe₂O₃, ZnO, and CdS nanoparticles in films of holographic recording media based on photosemiconductors (oligomers and co-oligomers of glycidyl carbazole) and a dielectric (copolymer of styrol with octylmethacrylate) that contain an organic compound with intramolecular charge transfer as a sensitizer of photoconductivity in the visible and near-IR regimes on their photoconducting and thermoplastic properties. The photoconduction current for light wavelengths larger than the red boundary of absorption of the nanoparticles is determined by the photogeneration of charge carriers from the sensitizer molecules and by their transport inside and between nanoparticles. The increase in the photosensitivity of films on addition of nanoparticles is attributed to the appearance of an additional channel for the transport of the electrons generated from the photogeneration centers. A new difference between the rheological properties of the films based on organic photosemiconductors and dielectrics has been revealed. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 6, pp. 815–820, November–December, 2005.     

Radiation-induced synthesis of RuO2 nanoparticles by thermal decomposition of Ru-tris-acetylacetonate

Pure-phase RuO₂ nanoparticles were obtained by thermal decomposition of unirradiated and γ-irradiated Ru-tris-acetylacetonate precursors. Several influencing factors including absorbed dose, calcination times and temperatures and addition of surfactants were thoroughly investigated. The newly synthesized RuO₂ nanoparticles were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The results showed that the best conditions for the preparation of mono-dispersed RuO₂ nanoparticles were achieved by calcinations of unirradiated Ru-tris-acetylacetonate for 6 h at 600°C. For γ-irradiated Ru-tris-acetylacetonate with 10² Gy total γ-ray doses, the optimal conditions for RuO₂ preparation were calcination for 2 h at 200°C. Thermal stability of RuO₂ nanoparticles was studied using thermogravimetric (TG) and differential thermal analysis (DTA) techniques, and the results were evaluated and discussed.     

Influence of heat treatment process in In<Subscript>2</Subscript>O<Subscript>3</Subscript>-MWCNTs as photoanode in DSSCs

Indium oxide-multi-walled carbon nanotubes (In₂O₃-MWCNTs) were prepared by sol-gel method for DSSCs. The synthesis of indium oxide (In₂O₃) was carried out by dissolving indium chloride (InCl₃) in a solvent of 2-methoxyethanol. Different annealing temperatures of 400, 450, 500, 550, and 600 °C were proposed in this study. The changes in the structural properties were analyzed by means of X-ray diffraction (XRD) and atomic force microscopy (AFM) analysis. The XRD spectrum estimated the average crystallite sizes of 3 nm for each sample. AFM results indicated very rough surface area of the films where it increased linearly from 1.8 to 11 nm as the annealing temperature increases. The In₂O₃-MWCNTs-based DSSC exhibited good photovoltaic performance with power conversion efficiency (η), photocurrent density (J _sc ), open circuit voltage (V _oc ), and fill factor (FF) of 1.13 %, 5.5 mA/cm², 0.53 V, and 0.42, respectively. Even though the film annealed at 450 °C exhibited low τ _eff, it achieved the greatest D _eff of 29.67 cm² s^?1 which provides an efficient pathway for the photogenerated electrons with minimum electron recombination loss that increased the J _sc and V _oc in the DSSC. The obtained structural and electron transport analysis was proposed as a suitable benchmark for In₂O₃-MWCNTs-based dye-sensitized solar cell (DSSCs) application. Hence, this study suggests that the optimum temperature for In₂O₃-MWCNTs is at annealing temperature of 450 °C prepared via sol-gel method.     

Synthesis of In2O3nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.