Binuclear ruthenium complexes of fluorous phosphine ligands: Synthesis, properties, and biphasic catalytic activity. Crystal structure of [Ru(μ-O2CMe)(CO)2P(CH2CH2(CF2)5CF3)3]2

The fluorocarbon soluble, binuclear ruthenium(I) complexes [Ru(μ-O₂CMe)(CO)₂L^F]₂, where L^F is the perfluoroalkyl substituted tertiary phosphine, P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃, or P(CH₂CH₂(CF₂)₅CF₃)₃, were synthesized and partition coefficients for the complexes in fluorocarbon/hydrocarbon biphases were determined. Catalytic hydrogenation of acetophenone to 1-phenylethanol in benzotrifluoride at 105 °C occured in the presence of either [Ru(μ-O₂CMe)(CO)₂P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃]₂ (1) or [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ (2). The X-ray crystal structure of [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ was determined. The compound exhibited discrete regions of fluorous and non-fluorous packing.     

Structure and properties of the dinuclear complex [Co2(μ-OAc)2(OAc)2(μ-H2O)(phen)2]

The dinuclear complex [Co₂(μ-OAc)₂(OAc)₂(μ-H₂O)(phen)₂] has been prepared and its structure was determined. The compound crystallizes in the monoclinic space group P2(1)/c. The Co–Co distance is 3.574 Å and is similar to the Fe–Fe distance in the reduced methane monooxygenase hydroxylase. The electronic and IR spectra of the complex confirm octahedral coordination of the cobalt atoms and formation of strong O–HO hydrogen bonds in the solid state. The dependence of the magnetic susceptibility of the complex on temperature indicates an antiferromagnetic interaction, the value of the isotropic exchange parameter J was estimated to be −2.1 cm⁻¹. The ¹H NMR spectra show that in organic solvents the structure of compound is the same as in the solid state, however, in water solution the complex dissociates giving compounds with different Co:phen ratios.     

Yb[N(SO2C8F17)2]3-catalyzed allylation of 1,3-dicarbonyl compounds with allylic alcohols in a fluorous biphase system

Allylation of 1,3-dicarbonyl compounds with allylic alcohols was successfully accomplished using rare earth metal (III) bis(perfluorooctanesulfonyl)imide [RE(NPf₂)₃, RE = La∼Lu] as catalysts in fluorous solvents. Ytterbium bis(perfluorooctanesulfonyl)imide [Yb(NPf₂)₃] catalyzes the high efficient reaction of allylation in fluorous solvents. By simple separation, fluorous phase containing only catalyst can be reused several times.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

Solubility of trans-Co2(CO)6 [3,5-bis(CF3)C6H3P(i-C3H7)2] in dense carbon dioxide

The title compound (1) was prepared by the reaction of 3,5-bis(CF₃)C₆H₃P(i-C₃H₇)₂ (L1) and Co₂(CO)₈. Its solubility in supercritical carbon dioxide was measured at varying temperatures and pressures using a modified analytical extraction device. Solubility data were determined in the temperature and pressure ranges between 40 and 70 °C and between 100 and 300 bar, respectively. The solubility of 1 is lower compared to (p-CF₃C₆H₄)₃P, but much higher than for transition metal complexes bearing phosphines without fluorinated substituents.     

Rhodium(I) carbonyl complexes of tetradentate chalcogen functionalized phosphines, [P(X)(CH2CH2P(X)Ph2)3] {X = O, S, Se}: Synthesis, reactivity and catalytic carbonylation reaction

The reaction of [Rh(CO)₂Cl]₂ with 0.5 mol equivalent of the ligands [P^′(X)(CH₂-CH₂P(X)Ph₂)₃](P^′P₃X₄) {where X = O(a), S(b) and Se(c)} affords tetranuclear complexes of the type [Rh₄(CO)₈Cl₄(P^′P₃X₄)] (1a-1c). The complexes 1a-1c have been characterized by elemental analyses, mass spectrometry, IR and multinuclear NMR spectroscopy, and the ligands b and c are structurally determined by single crystal X-ray diffraction. 1a-1c undergo oxidative addition (OA) reactions with CH₃I to generate Rh(III) oxidised products. Kinetic data for the reaction of 1a and 1b with excess CH₃I indicate a pseudo first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester show a higher Turn Over Frequency (TOF = 1349-1748 h⁻¹) compared to the well-known species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the similar experimental conditions. However, 1b and 1c exhibit lower TOF than 1a, which may be due to the desulfurization and deselinization of the ligands in the respective complexes under the reaction conditions.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC≈ 150° ((CF₃SO₂)₂CF₂ are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O₂ possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC ≈ 150° ((CF₃SO₂)₂CF₂) are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

双(1-甲基咪唑-2-基)甲酮、双(1-甲基咪唑-2-基)甲烷及双(1-甲基咪唑-2-基)乙烯与第六族羰基金属化合物的反应研究(英文)

本文研究了羰基钼(钨)与双(1-甲基咪唑-2-基)甲酮和双(1-甲基咪唑-2-基)甲烷以及双(1-甲基咪唑-2-基)乙烯的反应,获得了6个双齿螯合的双(1-甲基咪唑-2-基)甲酮,双(1-甲基咪唑-2-基)甲烷和双(1-甲基咪唑-2-基)乙烯四羰基金属衍生物,以及1个单齿配位的双(1-甲基咪唑-2-基)乙烯五羰基钨化合物。它们的结构通过红外,核磁以及X-射线单晶衍射分析得到确证。所有这些新化合物的电化学测试表明,它们只存在一个不可逆的氧化过程。     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

4-羧基苯氧乙酸锰配位聚合物[Mn(p-CPOA)(H2O)3]n的合成与晶体结构

The coordination polymer of [Mn(p-CPOA)(H₂O)₃]_n (p-CPOA=4-carboxylphenoxyacetate) was synthesized and characterized by elemental analysis, IR， X-ray single crystal diffraction. The title complex crystallizes in mono-clinic with space group P2₁/c, a=0.699 8(1) nm, b=1.6235(3) nm, c=1.014 3(2) nm, β=99.55(3)°. V=1.136 5(4) nm³, Z=4, D_c=1.772 g·cm^-3, μ=1.193mm^-1, F(000)=620, R=0.026 8, wR=0.074 5. The manganese atom is seven-coordinate involving four oxygen atoms of different p-CPOA^2- ligands and three coordinated water, forming a distorted pentagonal bipyramindal environment. Two manganese atoms are bridged by p-CPOA^2- ligand, forming a one-dimensional zigzag chain structure along p axis. The adjacent distance of Mn…Mn atoms is 1.021 0 nm. The three-dimensional hydrogen bonding network was formed by the intermolecular hydrogen bonds. CCDC: 219358.     

Symmetrization of methylmercury(II) and phenylmercury(II) salts induced by the tripodal ligand N(CH2CH2PPh2)3

Both ionic [HgR(DMSO)][CF₃SO₃] (R = Me or Ph) and covalent HgMeI organomercury(II) compounds react with the tripodal ligand N(CH₂CH₂PPh₂)₃ (np₃) to yield as ultimate products Hg(II) complexes, the new five-coordinated [Hg(OSO₂CF₃)(np₃)]⁺ or the known tetrahedral [HgI(np₃)]⁺ and symmetric diorganomercurials respectively. Monitoring of the reactions by ¹H, ³¹P and ¹³C NMR spectroscopy has shown that the mechanistic pathways depend on the nature of the reagents.     

一个新颖的三核镍配合物[Ni3(C13H9N2O)5(CH3OH)(CH3CH2OH)]Cl的合成、晶体结构及性质研究

在甲醇-乙醇混合溶剂中, 含有N, O给体的二齿配体2-(2-羟苯基)苯并咪唑与NiCl2•6H2O在常温下反应合成得到标题化合物, 采用元素分析、红外光谱、紫外光谱、热分析以及X射线单晶衍射法对其进行了组成和结构表征. 结果表明该化合物为三斜晶系, 空间群P-1, 晶胞参数: a＝1.2046(2) nm, b＝1.4891(3) nm, c＝2.1342(4) nm, α＝96.787(3)°, β＝104.862(3)°, γ＝99.993(3)°, V＝3.5904(12) nm3, Z＝2, Dc＝1.349 g/cm3, F(000)＝1516, GOF＝1.008, R1＝0.0583, wR2＝0.1455 [I＞2σ(I)]. 在标题化合物的晶体结构中, 晶体学不对称的三个配位中心Ni(II)原子配位环境各不相同, 五个配体提供的五个氧配位基中有四个起着桥联的作用, 形成了一个新颖的V型金属簇状化合物. 变温磁化率研究表明标题化合物在整体上表现为弱的反铁磁性耦合作用.     

Polyvinylidenefluoride-hexafluoropropylene based nanocomposite polymer electrolytes (NCPE) complexed with LiPF3(CF3CF2)3

Merck KGaA, Germany recently tested a new electrolyte salt LiPF₃(CF₃CF₂)₃ (lithium fluoroalkyl phosphate (LiFAP)) for lithium ion power packs and suggested that it can be replaced with commercially used LiPF₆. LiFAP, for the first of its kind, was incorporated into polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP) matrix with ethylene carbonate and diethyl carbonate mixtures as plasticizing agents and SiO₂ nanoparticles as filler. Nanocomposite polymer electrolyte (NCPE) membranes were prepared by solvent casting technique. All NCPE membranes were subjected to a.c. impedance, fluorescence and morphological studies. NCPE membranes containing 2.5 wt% of SiO₂ exhibited enhanced conductivity of 1.13 mS cm⁻¹ at ambient temperature. Molecular motion in the polymeric media was supported by fluorescence studies. The percentage of crystallinity and activation energy has also been calculated.     

配合物[Cd(NIT4Py)2][Au(CN)2]2的合成与晶体结构

A Cd(II)-nitronyl nitroxide radical complex with dicyanoaurate(I) bridges [Cd(NIT4Py)₂][Au(CN)₂]₂, was synthesized and characterized by elemental analyses, IR spectrum and X-ray diffraction single-crystal structure analysis. Crystal data for the complex: triclinic, space group P1, a=0.720 9(11) nm, b=0.960 3(15) nm, c=1.284(2) nm, α=75.38(2)°, β=85.46(2)°, γ=68.38(2)°, V=0.800(2) nm³, Z=1, and R₁ [I>2σ(I)]=0.055 8. The title complex consists of infinite one-dimensional chains of [Cd(NIT4Py)₂][Au(CN)₂]₂, in which [Cd(NIT4Py)₂] moieties are conne-cted by [Au(CN)₂]^- μ₂-bridging ligands. Each cadmium(II) ion is six-coordinated in a distorted and centrosymmetric octahedral environment. CCDC: 258357.     

Synthesis,characterization and antimicrobial studies of mixed ligand silver(I) complexes of thioureas and triphenylphosphine; crystal structure of {[Ag(PPh3)(thiourea)(NO3)]2·[Ag(PPh3)(thiourea)]2(NO3)2}

Mixed ligand silver(I) complexes of triphenylphosphine and thioureas (thiourea (Tu), N-methylthiourea (Metu), N,N′-dimethylthiourea (Dmtu) and N,N′-diethylthiourea (Detu)) with the general formulae, [(Ph₃P)₂Ag(thione)]NO₃ and [(Ph₃P)Ag(thione)₂]NO₃, have been prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. The crystal structure of one of them has been determined by X-ray crystallography. The spectral data of the complexes are consistent with sulfur coordination of the thiones to silver(I). The single crystal X-ray structure of complex 1, {[Ag(PPh₃)(thiourea)(NO₃)]₂·[Ag(PPh₃)(thiourea)]₂(NO₃)₂}, shows that the complex consists of two independent centrosymmetric binuclear units, each having the silver atoms coordinated to one PPh₃ and two bridging thiourea molecules. In one of the independent units the silver atom is additionally bound to a nitrate ion, leading to a tetrahedral geometry, while in the other unit the silver atom adopts a trigonal planar environment. Antimicrobial activities of the complexes were evaluated by their minimum inhibitory concentration and the results showed that the complexes show a wide range of activity against two gram-negative bacteria (Escherichiacoli, Pseudomonasaeruginosa) and molds (Aspergillusniger, Penicilliumcitrinum), while the activities were poor against yeasts (Candidaalbicans, Saccharomycescerevisiae). However, the title complex did not show activity against any tested microorganism.     

Synthesis and coordination chemistry of new tetradentate N2S2 donor Schiff-base ligand ca2-dapte: Mononuclear and dinuclear copper(I) complexes [Cu(ca2dapte)]ClO4 and [{Cu(PPh3)(X)}2(ca2dapte)] (X = I and Br)

A mononuclear copper(I) complex, [Cu(ca₂dapte)]ClO₄ (1), and two dinuclear copper(I) complexes, [{Cu(PPh₃)(X)}₂(ca₂dapte)] (X = I (2) and Br (3)), of a new tetradentate N₂S₂ donor Schiff-base ligand ca₂dapte have been prepared (ca₂dapte = N,N′-bis(trans-cinnamaldehyde)-1,2-di(o-iminophenylthio)ethane). These compounds have been characterized by elemental analyses (CHN), FT-IR, UV–Vis and ¹H NMR spectroscopy. The crystal structures of these copper(I) complexes have been determined by single-crystal X-ray diffraction. The coordination geometry around Cu(I) centers in these complexes is a distorted tetrahedron. The ca₂dapte is coordinated to Cu(I) as a tetradentate ligand in 1, while it acts as a bis-bidentate bridging ligand in 2 and 3.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Reaction of Ru3(CO)12 with but-2-yn-1,4-diol in CH3OH/KOH solution. Crystal structure of (μ-Cl)Ru3(CO)9[μ3-η-H2CCC(H)CH2]

The reaction of Ru₃(CO)₁₂ with but-2-yn-1,4-diol (HOCH₂CCCH₂OH, BUD) in CH₃OH/KOH followed by acidification with HCl leads to four products, one of which has been identified as the title complex (μ-Cl)Ru₃(CO)₉[μ₃-η⁴-H₂CCC(H)CH₂]. This is an open cluster containing a bridging Cl atom on the open side and a C₄H₅ moiety bound to all the metals. The structure of the complex has been determined by X-ray analysis.The thermal reaction of Ru₃(CO)₁₂ with BUD has been revisited for a comparison with the results in alkaline solution. The main product is the allylic derivative HRu₃(CO)₉[HCCHCCHO].     

Crystal structure and spectral characterization of hexanuclear oxo titanium(IV) clusters: [Ti6O6(OSi(CH3)3)6(OOCR)6] (R = Bu,CH2Bu,C(CH3)2Et)

Hexanuclear oxo titanium(IV) siloxo carboxylate complexes with the general formula [Ti₆O₆(OSi(CH₃)₃)₆(OOCR)₆] (R = Bu^t (1), CH₂Bu^t (2), C(CH₃)₂Et (3)) were synthesized in quantitative yield, by the reaction of Ti(OSiMe₃)₄ with the appropriate organic acid. Crystal structure determination revealed that molecules of 1–3 are composed of [Ti₆-(μ₃-O)₆] cores stabilized by six syn–syn carboxylato bridges and six terminal siloxide ligands. Each metal atom is surrounded by six oxo atoms, capping the triangular faces of the distorted octahedron. Spectral characterization (IR, NMR) of 1–3 revealed a significant non-equivalence of the carboxylate group interactions, resulting from the asymmetry of the Ti-μ-OOC bonds of the syn–syn bridges. The thermal stability of the studied compounds was determined from TGA/DTA analysis.