The mechanism of the water-gas shift reaction on Cu/TiO2(110) elucidated from application of density-functional theory

The Cu/TiO(2)(110) surface displays a great catalytic activity toward the water-gas shift reaction (WGSR), for which Cu is considered to be the most active metal on a TiO(2)(110)-supported surface. Experiments revealed that Cu nanoparticles bind preferentially to the terrace and steps of the TiO(2)(110) surface, which would not only affect the growth mode of the surface cluster but also enhance the catalytic activity, unlike Au nanoparticles for which occupancy of surface vacancies is favored, resulting in poorer catalytic performance than Cu. With density-functional theory we calculated some possible potential-energy surfaces for the carboxyl and redox mechanisms of the WGSR at the interface between the Cu cluster and the TiO(2) support. Our results show that the redox mechanism would be the dominant path; the resident Cu clusters greatly diminish the barrier for CO oxidation (22.49 and 108.68 kJ mol(-1), with and without Cu clusters, respectively). When adsorbed CO is catalytically oxidized by the bridging oxygen of the Cu/TiO(2)(110) surface to form CO(2), the release of CO(2) from the surface would result in the formation of an oxygen vacancy on the surface to facilitate the ensuing water splitting (barrier 34.90 vs. 50.49 kJ mol(-1), with and without the aid of a surface vacancy).     

CO oxidation on Aun/TiO2 catalysts produced by size-selected cluster deposition

Planar model catalysts were prepared by deposition of size-selected gold clusters containing up to seven atoms on rutile TiO2 (110). Molecular oxygen is observed to bind inefficiently to the surface, probably at oxygen vacancies, and some oxygen also appears to bind to the gold clusters. Stable CO binding is observed atop gold for catalysts prepared by Au and Au2 deposition, but not for larger Aun. CO oxidation activity is strongly dependent on cluster size, with Au7-prepared samples >50 times more reactive than samples prepared by Au or Au2 deposition     

Intact size-selected Au(n) clusters on a TiO2(110)-(1 x 1) surface at room temperature

Experiments in which mass-selected gold clusters were deposited on a surface have found that the catalytic properties depend strongly on cluster size. However, these experiments have not established definitively that the clusters maintain their size after deposition. We report here work in which we deposit low kinetic energy, mass-selected Aun+ (n = 1-8) clusters on a rutile TiO2(1 x 1) surface and use ultrahigh vacuum scanning tunneling microscopy (UHV-STM) to determine their size and shape.     

Density functional study of the interaction between small Au clusters, Au(n) (n=1-7) and the rutile TiO2 surface. II. Adsorption on a partially reduced surface

We use density functional theory to examine the electronic structure of small Au(n) (n=1-7) clusters, supported on a rutile TiO(2)(110) surface having oxygen vacancies on the surface (a partially reduced surface). Except for the monomer, the binding energy of all Au clusters to the partially reduced surface is larger by approximately 0.25 eV than the binding energy to a stoichiometric surface. The bonding site and the orientation of the cluster are controlled by the shape of the highest occupied molecular orbitals (HOMOs) of the free cluster (free cluster means a gas-phase cluster with the same geometry as the supported one). The bond is strong when the lobes of the HOMOs overlap with those of the high-energy states of the clean oxide surface (i.e., with no gold) that have lobes on the bridging and the in-plane oxygen atoms. In other words, the cluster takes a shape and a location that optimizes the contact of its HOMOs with the oxygen atoms. Fivefold coordinated Ti atoms located at a defect site (5c-Ti(*)) participate in the binding only when a protruding lobe of the singly occupied molecular orbital (for odd n) or the lowest unoccupied molecular orbital (for even n) of the free Au(n) cluster points toward a 5c-Ti(*) atom. The oxygen vacancy influences the binding energy of the clusters (except for Au(1)) only when they are in direct contact with the defect. The desorption energy and the total charge on clusters that are close to, but do not overlap with, the vacancy differ little from the values they have when the cluster is adsorbed on a stoichiometric surface. The behavior of Au(1) is rather remarkable. The atom prefers to bind directly to the vacancy site with a binding energy of 1.81 eV. However, it also makes a strong bond (1.21 eV) with any 5c-Ti atom even if that atom is far from the vacancy site. In contrast, the binding of a Au monomer to the 5c-Ti atom of a surface without vacancies is weak (0.45 eV). The presence of the vacancy activates the 5c-Ti atoms by populating states at the bottom of the conduction band. These states are delocalized and have lobes protruding out of the surface at the location of the 5c-Ti atoms. It is the overlap of these lobes with the highest orbital of the Au atom that is the major reason for the bonding to the 5c-Ti atom, no matter how far the latter is from the vacancy. The energy for breaking an adsorbed cluster into two adsorbed fragments is smaller than the kinetic energy of the mass-selected clusters deposited on the surface in experiments. However, this is not sufficient for breaking the cluster upon impact with the surface, since only a fraction of the available energy will go into the reaction coordinate for breakup.     

The mechanism of emerging catalytic activity of gold nano-clusters on rutile TiO2(110) in CO oxidation reaction

This paper reveals the fact that the O adatoms (O(ad)) adsorbed on the 5-fold Ti rows of rutile TiO(2)(110) react with CO to form CO(2) at room temperature and the oxidation reaction is pronouncedly enhanced by Au nano-clusters deposited on the above O-rich TiO(2)(110) surfaces. The optimum activity is obtained for 2D clusters with a lateral size of ～1.5 nm and two-atomic layer height corresponding to ～50 Au atoms∕cluster. This strong activity emerging is attributed to an electronic charge transfer from Au clusters to O-rich TiO(2)(110) supports observed clearly by work function measurement, which results in an interface dipole. The interface dipoles lower the potential barrier for dissociative O(2) adsorption on the surface and also enhance the reaction of CO with the O(ad) atoms to form CO(2) owing to the electric field of the interface dipoles, which generate an attractive force upon polar CO molecules and thus prolong the duration time on the Au nano-clusters. This electric field is screened by the valence electrons of Au clusters except near the perimeter interfaces, thereby the activity is diminished for three-dimensional clusters with a larger size.     

Density functional study of the charge on Aun clusters (n=1-7) supported on a partially reduced rutile TiO2(110): are all clusters negatively charged?

It is widely believed that small gold clusters supported on an oxide surface and adsorbed at the site of an oxygen vacancy are negatively charged. It has been suggested that this negative charge helps a gold cluster adsorb oxygen and weakens the O-O bond to make oxidation reactions more efficient. Given the fact that an oxygen vacancy is electron rich and that Au is a very electronegative element, the assumption that the Au cluster will take electron density from the vacancy is plausible. However, the density functional calculations presented here show that the situation is more complicated. The authors have used the Bader method to examine the charge redistribution when a Aun cluster (n=1-7) binds next to or at an oxygen vacancy on rutile TiO2(110). For the lowest energy isomers they find that Au1 and Au3 are negatively charged, Au5 and Au7 are positively charged, and Au2, Au4, and Au6 exchange practically no charge. The behavior of the Aun isomers having the second-lowest energy is also unexpected. Au2, Au3, Au5, and Au7 are negatively charged upon adsorption and very little charge is transferred when Au4 and Au6 are adsorbed. These observations can be explained in terms of the overlap between the frontier molecular orbitals of the gold cluster and the eigenstates of the support. Aun with even n becomes negatively charged when the lowest unoccupied molecular orbital has a lobe pointing in the direction of the oxygen vacancy or towards a fivefold coordinated Ti (5c-Ti) located in the surface layer; otherwise it stays neutral. Aun with odd n becomes negatively charged when the singly occupied molecular orbital has a lobe pointing in the direction of a 5c-Ti located at the vacancy site or in the surface layer, otherwise it donates electron density into the conduction band of rutile TiO2(110) becoming positively charged.     

Agglomeration, sputtering, and carbon monoxide adsorption behavior for Au/Al(2)O(3) prepared by Au(n)(+) deposition on Al(2)O(3)/NiAl(110)

Size-selected gold clusters, Au(n)(+) (n = 1, 3, 4), were deposited on an ordered Al(2)O(3) film grown on NiAl(110), and changes in morphology and electronic properties with deposition/annealing temperature and cluster size were investigated by X-ray photoelectron spectroscopy (XPS) and ion-scattering spectroscopy (ISS). Extensive agglomeration was observed by ISS for annealing temperatures above 300 K, accompanied by large shifts in the Au XPS binding energy. Agglomeration is more extensive in room-temperature deposition, compared to samples prepared by low-temperature deposition, then annealed to room temperature. Agglomeration is also observed to be dependent on deposited cluster size. CO adsorption was studied by ISS and temperature-programmed desorption, and we looked for CO oxidation under conditions where substantial activity is seen for Au(n)/TiO(2). No activity was observed for Au(n)/Al(2)O(3). The differences between the two systems are interpreted in terms of the nature of the metal-support interactions.     

同步辐射光电了能谱研究在团簇存金红石相TiO2-（1×1）表面的生长和稳定性

利用同步辐射高分辨光电子能谱研究了金团簇在部分还原TiO2-（1×1）表面的生长和稳定性．价带谱实验结果观察到非常少量金团簇的沉积导致了Ti^3＋的3d峰完全消失,表明金团簇成核在TiO2-（1×1）表面的氧缺陷位．Au4f芯电子光电子能谱实验结果证明了TiO2-（1×1）表面氧缺陷位向金团簇转移电荷．还对比研究了化学剂量比和部分还原的TiO2-（1×1）表面上金团簇的热稳定性．当金团簇尺寸相近时部分还原的TiO2-（1×1）表面上金团簇要比化学剂量比的TiO2-（1×1）面上金团簇稳定;在相同的表面上尺寸大的金团簇要比尺寸小的金团簇稳定．     

Dimethyl methylphosphonate decomposition on Cu surfaces: supported Cu nanoclusters and films on TiO2(110)

The thermal decomposition of dimethyl methylphosphonate (DMMP), which is a simulant molecule for organophosphorus nerve agents, has been investigated on Cu clusters as well as on Cu films deposited on a TiO(2)(110) surface. Scanning tunneling microscopy studies were conducted to characterize the cluster sizes and surface morphologies of the deposited Cu clusters and films. Temperature-programmed desorption experiments demonstrated that the surface chemistry of DMMP is not sensitive to the size of the Cu clusters over the range studied in this work. DMMP reaction on an annealed 40 monolayer Cu film resulted in the desorption of H(2), methane, methyl, formaldehyde, methanol, and molecular DMMP, and reaction on the small (4.4 +/- 0.9 nm diameter, 1.8 +/- 0.6 nm height) and large (10.7 +/- 1.9 nm diameter, 4.8 +/- 1.0 nm height) Cu clusters generated similar products. Formaldehyde and methane production is believed to occur via a methoxy intermediate on the Cu surface. These products are favored on the higher coverage Cu films that completely cover the TiO(2) surface since competing reaction pathways on TiO(2) are suppressed. X-ray photoelectron spectroscopy studies showed that DMMP begins to decompose on the Cu clusters upon adsorption at room temperature and that atomic carbon, atomic phosphorus, and PO(x) remain on the surface after DMMP decomposition.     

Helium mediated deposition: modeling the He-TiO2(110)-(1×1) interaction potential and application to the collision of a helium droplet from density functional calculations

This paper is the first of a two-part series dealing with quantum-mechanical (density-functional-based) studies of helium-mediated deposition of catalytic species on the rutile TiO(2)(110)-(1×1) surface. The interaction of helium with the TiO(2)(110)-(1×1) surface is first evaluated using the Perdew-Burke-Ernzerhof functional at a numerical grid dense enough to build an analytical three-dimensional potential energy surface. Three (two prototype) potential models for the He-surface interaction in helium scattering calculations are analyzed to build the analytical potential energy surface: (1) the hard-corrugated-wall potential model; (2) the corrugated-Morse potential model; and (3) the three-dimensional Morse potential model. Different model potentials are then used to study the dynamics upon collision of a (4)He(300) cluster with the TiO(2)(110) surface at zero temperature within the framework of a time-dependent density-functional approach for the quantum fluid [D. Mateo, D. Jin, M. Barranco, and M. Pi, J. Chem. Phys. 134, 044507 (2011)] and classical dynamics calculations. The laterally averaged density functional theory-based potential with an added long-range dispersion interaction term is further applied. At variance with classical dynamics calculations, showing helium droplet splashing out of the surface at impact, the time evolution of the macroscopic helium wave-function predicts that the helium droplet spreads on the rutile surface and leads to the formation of a thin film above the substrate. This work thus provides a basis for simulating helium mediated deposition of metallic clusters embedded within helium nanodroplets.     

Activation of gold on titania: adsorption and reaction of SO(2) on Au/TiO(2)(110)

Synchrotron-based high-resolution photoemission and first-principles density-functional slab calculations were used to study the interaction of gold with titania and the chemistry of SO(2) on Au/TiO(2)(110) surfaces. The deposition of Au nanoparticles on TiO(2)(110) produces a system with an extraordinary ability to adsorb and dissociate SO(2). In this respect, Au/TiO(2) is much more chemically active than metallic gold or stoichiometric titania. On Au(111) and rough polycrystalline surfaces of gold, SO(2) bonds weakly and desorbs intact at temperatures below 200 K. For the adsorption of SO(2) on TiO(2)(110) at 300 K, SO(4) is the only product (SO(2) + O(oxide) --> SO(4,ads)). In contrast, Au/TiO(2)(110) surfaces (theta;(Au) < or = 0.5 ML) fully dissociate the SO(2) molecule under identical reaction conditions. Interactions with titania electronically perturb gold, making it more chemically active. Furthermore, our experimental and theoretical results show quite clearly that not only gold is perturbed when gold and titania interact. The adsorbed gold, on its part, enhances the reactivity of titania by facilitating the migration of O vacancies from the bulk to the surface of the oxide. In general, the complex coupling of these phenomena must be taken into consideration when trying to explain the unusual chemical and catalytic activity of Au/TiO(2). In many situations, the oxide support can be much more than a simple spectator.     

SO2 on TiO2(110) and Ti2O3(102) nonpolar surfaces: a DFT study

Density functional molecular cluster calculations have been used to investigate the interaction of SO(2) with defect-free TiO(2)(110) and Ti(2)O(3)(102) surfaces. Adsorbate geometries and chemisorption enthalpies have been computed and discussed. Several local minima have been found for TiO(2)(110), but only one seems to be relevant for the catalytic conversion of SO(2) to S. In agreement with experiment, the bonding of SO(2) to Ti(2)O(3)(102) is much stronger than that on TiO(2)(110). Moreover, our results are consistent with the surface oxidation and the formation of strong Ti-O and Ti-S bonds. On both substrates, the bonding is characterized by a two-way electron flow involving a donation from the SO(2) HOMO into virtual orbitals of surface Lewis acid sites (), assisted by a back-donation from surface states into the SO(2) LUMO. However, the localization of surface states and the strength of back-donation are very different on the two surfaces. On TiO(2)(110), back-donation is weaker, and it involves unsaturated bridging O atoms, while on Ti(2)O(3)(102), it implies the -based valence band maximum and significantly weakens the S-O bond.     

Enhanced adsorption energy of Au1 and O2 on the stoichiometric TiO2(110) surface by coadsorption with other molecules

During heterogeneous catalysis the surface is simultaneously covered by several adsorbed molecules. The manner in which the presence of one kind of molecule affects the adsorption of a molecule of another kind has been of interest for a long time. In most cases the presence of one adsorbate does not change substantially the binding energy of another adsorbate. The calculations presented here show that the stoichiometric rutile TiO(2)(110) surface, on which one of the compounds -OH, Au(3), Au(5), Au(7), Na, K, or Cs or two different gold strips was preadsorbed, behaves differently: the binding energy of Au(1) or O(2) to such a surface is much stronger than the binding to the clean stoichiometric TiO(2)(110) surface. Moreover, the binding energy of Au(1) or O(2) and the amount of charge they take from the surface when they adsorb are the same, regardless of which of the above species is preadsorbed. The preadsorbed species donate electrons to the conduction band of the oxide, and these electrons are used by Au(1) or O(2) to make stronger bonds with the surface. This suggests that adding an electron to the conduction band of the clean stoichiometric TiO(2)(110) slab used in the calculation will affect similarly the adsorption energy of Au(1) or O(2). Our calculations show that it does. We have also studied how the preadsorption of Au(4) or Au(6) affects the binding of Au(1) or O(2) to the surface. These two gold clusters do not donate electrons to the surface when they bind to it and therefore should not influence substantially the binding energy of Au(1) or O(2) to the surface. However, adsorbing O(2) or Au(1) on the surface forces the clusters to change their structure into that of isomers that donate charge to the oxide. This charge is used by Au(1) or O(2) to bind to the surface and the energy of this bond exceeds the isomerization energy. As a result the surface with the isomerized cluster is the lowest energy state of the system. We believe that these results can be generalized as follows. The molecules that we coadsorbed with Au(1) or O(2) donate electrons to the oxide and are Lewis bases. By giving the surface high energy electrons, they turn it into a Lewis base and this increases its ability to bind strong Lewis acids such as Au(1) and O(2). We speculate that this kind of interaction is general and may be observed for other oxides and for other coadsorbed Lewis base-Lewis acid pairs.     

Growth mechanism of palladium clusters on rutile TiO2 （110） surface

Oxide-supported transition metal systems have been the subject of enormous interest due to the improvement of catalytic properties relative to the separate metal.Thus in this paper,we embark on a systematic study for Pd n (n=1-5) clusters adsorbed on TiO2 (110) surface based on DFT-GGA calculations utilizing periodic supercell models.A single Pd adatom on the defect-free surface prefers to adsorb at a hollow site bridging a protruded oxygen and a five-fold titanium atom along the [110] direction,while Pd dimer is located on the channels with the Pd-Pd bond parallel to the surface.According to the transition states (TSs) search,the adsorbed Pd trimer tends to triangular growth mode,rather than linear mode,while the Pd4 and Pd5 clusters prefer three-dimensional (3D) models.However,the oxygen vacancy has almost no influence on the promotion of Pd n cluster nucleation.Additionally,of particular significance is that the Pd-TiO2 interaction is the main driving force at the beginning of Pd nucleation,whereas the Pd-Pd interaction gets down to control the growth process of Pd cluster as the cluster gets larger.It is hoped that our theoretical study would shed light on further designing high-performance TiO2 supported Pd-based catalysts.     

Two-dimensional to three-dimensional structural transition of gold cluster Au10 during soft landing on TiO2 surface and its effect on CO oxidation

We investigate the possible structural transition of a planar Au(10) cluster during its soft landing on a TiO(2) (110) surface with or with no oxygen defects. The collision between the gold cluster and the oxide surface is simulated using the Car-Parrinello quantum molecular dynamics method. Both high-speed and low-speed conditions typically implemented in soft-landing experiments are simulated. It is found that under a high-speed condition, the gold cluster Au(10) can undergo a sequence of structural transitions after colliding with a defect-free TiO(2) (110) surface. When the TiO(2) (110) surface possesses oxygen vacancies, however, chemical bonds can form between gold and Ti atoms if gold atoms contact directly with the vacancies. As a consequence, one oxygen vacancy is capable of trapping one Au atom, and thus can split the Au(10) into two parts while bouncing back from the surface. In addition, we study reaction pathways for the CO oxidation based on three isomer structures of Au(10) observed in the soft-landing simulation: (1) the precollision two-dimensional structure, (2) a postcollision three-dimensional (3D) structure, and (3) an intermediate (transient) 3D structure that appeared in the midst of the collision. This study allows us to examine the structure-activity relationship using the Au(10) as a prototype model catalyst.     

金属簇X (X=Pt-Au,Au-Au)负载在(3×2) TiO2(110)完整表面上的覆盖度效应

采用自旋极化密度泛函和广义梯度近似的方法并结合周期平板模型, 探讨了不同覆盖度(θ)下双金 属簇X (X=Pt-Au, Au-Au)在(3×2)TiO₂(110)完整表面上的吸附行为. 另外, 在本文给出的所有覆盖度模式下(θ= 1/6-1 ML), 我们仅研究其基态构型. 计算结果表明: 当θ<1/2 ML时, 金属簇X在TiO₂(110)表面上吸附能随覆盖 度的增加而增加; 当θ>1/2 ML时, 除了饱和覆盖度下, 吸附能随覆盖度的增加而减小; 当θ=1/2 ML时, 吸附能最 大. 即使Pt-Au/TiO₂体系的吸附能比Au-Au/TiO₂体系的小, 但相对于Au-Au 簇, Pt-Au 簇更容易在TiO₂(110)表 面上形成双金属单分子层. 在半覆盖和全覆盖下, X簇的峰与TiO₂的峰在-3.0 eV到费米能级之间产生明显重 叠, 表明簇与底物之间存在化学作用. 且当覆盖度小时, X-TiO₂相互作用是成簇的主要因素; 随着覆盖度的增 大, X-X原子间相互作用就逐渐变成了成簇的主要动力.     

Landing of size-selected Agn+ clusters on single crystal TiO2 (110)-(1x1) surfaces at room temperature

Mass-selected Ag(n) (+) (n=1,2,3) clusters with impact energy less than 2 eV per atom were deposited from the gas phase onto rutile titania (110)-(1x1) single crystal surfaces at room temperature and imaged using ultra-high vacuum scanning tunneling microscopy. Upon reaching the surface, Ag monomers sintered to form three-dimensional islands of approximately 50 atoms in size, with an average measured height of 7.5 A and diameter of 42 A. This suggests that the monomers are highly mobile on the titania surface at room temperature. Dimers also sintered to form large clusters upon deposition, approximately 30 atoms in size, with an average height of 6.2 A and diameter of 33 A. Clusters formed from monomer deposition appeared approximately three times more frequently at step edges than clusters formed from dimer deposition, indicating that the surface mobility of deposited monomers is higher than that of deposited dimers. In sharp contrast to the deposition of monomers and dimers, the deposition of trimers resulted in a high density of very small clusters on the order of a few atoms in size, indicative of intact trimers on the surface, implying that deposited trimers have very limited mobility on the surface at room temperature.     

Density functional study of the interaction between small Au clusters, Au(n) (n=1-7) and the rutile TiO(2) surface. I. Adsorption on the stoichiometric surface

This is the first paper in a series of four dealing with the adsorption site, electronic structure, and chemistry of small Au clusters, Au(n) (n=1-7), supported on stoichiometric, partially reduced, or partially hydroxylated rutile TiO(2)(110) surfaces. Analysis of the electronic structure reveals that the main contribution to the binding energy is the overlap between the highest occupied molecular orbitals of Au clusters and the Kohn-Sham orbitals localized on the bridging and the in-plane oxygen of the rutile TiO(2)(110) surface. The structure of adsorbed Au(n) differs from that in the gas phase mostly because the cluster wants to maximize this orbital overlap and to increase the number of Au-O bonds. For example, the equilibrium structures of Au(5) and Au(7) are planar in the gas phase, while the adsorbed Au(5) has a distorted two-dimensional structure and the adsorbed Au(7) is three-dimensional. The dissociation of an adsorbed cluster into two adsorbed fragments is endothermic, for all clusters, by at least 0.8 eV. This does not mean that the gas-phase clusters hitting the surface with kinetic energy greater than 0.8 eV will fragment. To place enough energy in the reaction coordinate for fragmentation, the impact kinetic energy needs to be substantially higher than 0.8 eV. We have also calculated the interaction energy between all pairs of Au clusters. These interactions are small except when a Au monomer is coadsorbed with a Au(n) with odd n. In this case the interaction energy is of the order of 0.7 eV and the two clusters interact through the support even when they are fairly far apart. This happens because the adsorption of a Au(n) cluster places electrons in the states of the bottom of the conduction band and these electrons help the Au monomer to bind to the five-coordinated Ti atoms on the surface.     

Oxidation of Au by surface OH: nucleation and electronic structure of gold on hydroxylated MgO(001)

The nucleation and electronic structure of vapor-deposited Au on hydroxylated MgO(001) surfaces has been investigated under ultrahigh vacuum conditions. Hydroxylated MgO(001) surfaces with two different hydroxyl coverages, 0.4 and 1 monolayer, respectively, were prepared by exposure to water (D(2)O) at room temperature. Scanning tunneling microscopy experiments show significantly higher gold particle densities and smaller particle sizes on the hydroxylated MgO surface as compared to gold deposited on clean MgO(001). Infrared spectroscopy and X-ray photoelectron spectroscopy experiments were performed to reveal details about the initial nucleation of gold. Gold atoms are found to chemically interact with a specific type of hydroxyl groups on the MgO surface, leading to the formation of oxidized gold particles. The enhanced adhesion of Au particles, which is due to the formation of strong Au-O interfacial bonds, is responsible for the observed higher stability of small Au clusters toward thermal sintering on hydroxylated MgO surfaces. The results are compared to similar studies on Au/TiO(2)(110) model systems and powder samples prepared by the deposition-precipitation route.