High-accuracy extrapolated ab initio thermochemistry of the vinyl, allyl, and vinoxy radicals

Enthalpies of formation at both 0 and 298 K were calculated according to the HEAT (High-accuracy Extrapolated Ab initio Thermochemistry) protocol for the title molecules, all of which play important roles in combustion chemistry. At the HEAT345-(Q) level of theory, recommended enthalpies of formation at 0 K are 301.5 ± 1.3, 180.3 ± 1.8, and 23.4 ± 1.5 kJ mol(-1) for vinyl, allyl, and vinoxy, respectively. At 298 K, the corresponding values are 297.3, 168.6, and 16.1 kJ mol(-1), with the same uncertainties. The calculated values for the three radicals are in excellent agreement with the corresponding experimental values, but the uncertainties associated with the HEAT values for vinoxy are considerably smaller than those based on experimental studies.     

High-accuracy extrapolated ab initio thermochemistry of vinyl chloride

Applying a modified "high accuracy extrapolated ab initio thermochemistry" (HEAT) scheme, the standard heat of formation of vinyl chloride at 0 K is computed to be 29.79 +/- 1 kJ/mol and at 298.15 K to be 20.9 +/- 2 kJ/mol, thus resolving earlier discrepancies among the available experimental values, which span a range from 21 up to 38 kJ/mol. The enthalpies of the reactions C2H4 + Cl2 --> CH2CHCl + HCl and C2H2 + HCl --> CH2CHCl at 298.15 K are determined to be -123.0 and -113.9 +/- 2 kJ/mol, respectively.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

Heats of formation of C(6)H(5)(•), C(6)H(5)(+), and C(6)H(5)NO by threshold photoelectron photoion coincidence and active thermochemical tables analysis

Threshold photoelectron photoion coincidence has been used to prepare selected internal energy distributions of nitrosobenzene ions [C(6)H(5)NO(+)]. Dissociation to C(6)H(5)(+) + NO products was measured over a range of internal energies and rate constants from 10(3) to 10(7) s(-1) and fitted with the statistical theory of unimolecular decay. A 0 K dissociative photoionization onset energy of 10.607 ± 0.020 eV was derived by using the simplified statistical adiabatic channel model. The thermochemical network of Active Thermochemical Tables (ATcT) was expanded to include phenyl and phenylium, as well as nitrosobenzene. The current ATcT heats of formation of these three species at 0 K (298.15 K) are 350.6 (337.3) ± 0.6, 1148.7 (1136.8) ± 1.0, and 215.6 (198.6) ± 1.5 kJ mol(-1), respectively. The resulting adiabatic ionization energy of phenyl is 8.272 ± 0.010 eV. The new ATcT thermochemistry for phenyl entails a 0 K (298.15 K) C-H bond dissociation enthalpy of benzene of 465.9 (472.1) ± 0.6 kJ mol(-1). Several related thermochemical quantities from ATcT, including the current enthalpies of formation of benzene, monohalobenzenes, and their ions, as well as interim ATcT values for the constituent atoms, are also given.     

Enthalpy of formation of the cyclopentadienyl radical: photoacoustic calorimetry and ab initio studies

The gas-phase C-H bond dissociation enthalpy (BDE) in 1,3-cyclopentadiene has been determined by time-resolved photoacoustic calorimetry (TR-PAC) as 358 +/- 7 kJ mol(-1). Theoretical results from ab initio complete basis-set approaches, including the composite CBS-Q and CBS-QB3 procedures, and basis-set extrapolated coupled-cluster calculations (CCSD(T)) are reported. The CCSD(T) prediction for the C-H BDE of 1,3-cyclopentadiene (353.3 kJ mol(-1)) is in good agreement with the TR-PAC result. On the basis of the experimental and the theoretical values obtained, we recommend 355 +/- 8 kJ mol(-1) for the C-H BDE of 1,3-cyclopentadiene and 271 +/- 8 kJ mol(-1) for the enthalpy of formation of cyclopentadienyl radical.     

Gaseous vanadium molybdate and tungstates: thermodynamic properties and structures

The stability of gaseous vanadium molybdate and vanadium tungstates was confirmed by high-temperature mass spectrometry. A number of gas-phase reactions involving vanadium-containing salts were studied. On the basis of equilibrium constants, the standard formation enthalpies of gaseous VMoO(4) (-676 ± 27 kJ/mol), VWO(3) (-331 ± 29 kJ/mol), and VWO(4) (-706 ± 23 kJ/mol) at 298 K were determined. A theoretical study of these salts revealed the structure with bidentate binding of the vanadium cation to the anion part to be the lowest-lying isomer, with a quartet spin state for VMoO(4) and VWO(4) molecules as well as a sextet spin state for the VWO(3) molecule. On the basis of critical analysis of the literature data concerning standard formation enthalpies of gaseous VO and VO(2), we adopted new values of Δ(f)H°(298) = 135 ± 10 kJ/mol for VO(g) and -185 ± 15.0 kJ/mol for VO(2)(g). Overall, the results obtained allowed us to estimate the standard formation enthalpy of VMoO(3) to be -318 kJ/mol with an accuracy near 40 kJ/mol.     

An experimental and computational study of the reaction of ground-state sulfur atoms with carbon disulfide

The pulsed laser photolysis/resonance fluorescence technique was used to study the reaction of S((3)P(J)) with CS(2) in an Ar bath gas. Over 290-770 K pressure-dependent kinetics were observed and low- and high-pressure limiting rate constants were derived as k(0) = (11.5-0.0133 T/K) × 10(-31) cm(6) molecule(-2) s(-1) (error limits ± 20%) and k(∞) = (2.2 ± 0.6) × 10(-12) cm(3) molecule(-1) s(-1). Equilibration observed at 690-770 K yields a CS(2)-S bond dissociation enthalpy of 131.7 ± 4.0 kJ mol(-1) at 298 K. This agrees with computed thermochemistry for a spin-forbidden C(2V) adduct, estimated at the coupled-cluster single double triple level extrapolated to the infinite basis set limit. A pressure-independent pathway, assigned to abstraction, was observed from 690 to 1040 K and can be summarized as 1.14 × 10(-10) exp(-37.0 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) with error limits of ± 40%. The results are rationalized in terms of a computed potential energy surface and transition state theory and Troe's unimolecular formalism.     

Dissociative photoionization mechanism of methanol isotopologues (CH3OH, CD3OH, CH3OD and CD3OD) by iPEPICO: energetics, statistical and non-statistical kinetics and isotope effects

The dissociative photoionization of energy selected methanol isotopologue (CH(3)OH, CD(3)OH, CH(3)OD and CD(3)OD) cations was investigated using imaging Photoelectron Photoion Coincidence (iPEPICO) spectroscopy. The first dissociation is an H/D-atom loss from the carbon, also confirmed by partial deuteration. Somewhat above 12 eV, a parallel H(2)-loss channel weakly asserts itself. At photon energies above 15 eV, in a consecutive hydrogen molecule loss to the first H-atom loss, the formation of CHO(+)/CDO(+) dominates as opposed to COH(+)/COD(+) formation. We see little evidence for H-atom scrambling in these processes. In the photon energy range corresponding to the B[combining tilde] and C[combining tilde] ion states, a hydroxyl radical loss appears yielding CH(3)(+)/CD(3)(+). Based on the branching ratios, statistical considerations and ab initio calculations, this process is confirmed to take place on the first electronically excited ?(2)A' ion state. Uncharacteristically, internal conversion is outcompeted by unimolecular dissociation due to the apparently weak Renner-Teller-like coupling between the X[combining tilde] and the ? ion states. The experimental 0 K appearance energies of the ions CH(2)OH(+), CD(2)OH(+), CH(2)OD(+) and CD(2)OD(+) are measured to be 11.646 ± 0.003 eV, 11.739 ± 0.003 eV, 11.642 ± 0.003 eV and 11.737 ± 0.003 eV, respectively. The E(0)(CH(2)OH(+)) = 11.6454 ± 0.0017 eV was obtained based on the independently measured isotopologue results and calculated zero point effects. The 0 K heat of formation of CH(2)OH(+), protonated formaldehyde, was determined to be 717.7 ± 0.7 kJ mol(-1). This yields a 0 K heat of formation of CH(2)OH of -11.1 ± 0.9 kJ mol(-1) and an experimental 298 K proton affinity of formaldehyde of 711.6 ± 0.8 kJ mol(-1). The reverse barrier to homonuclear H(2)-loss from CH(3)OH(+) is determined to be 36 kJ mol(-1), whereas for heteronuclear H(2)-loss from CH(2)OH(+) it is found to be 210 kJ mol(-1).     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Conformational and thermodynamic properties of gaseous levulinic acid

Molecular modeling is used to determine low-energy conformational structures and thermodynamic properties of levulinic acid in the gas phase. Structure and IR vibrational frequencies are obtained using density functional and M?ller-Plesset perturbation theories. Electronic energies are computed using G3//B3LYP and CBS-QB3 model chemistries. Computed anharmonic frequencies are consistent with reported experimental data. Population analysis shows a boat- and a chainlike structure to be most abundant at 298 K, with increasing proportions of two other conformers at higher temperatures. Population mean distribution values for thermodynamic quantities are derived. At 298 K and 1 atm, the enthalpy of formation, entropy, and heat capacity are -613.1 ± 1.0 kJ·mol(-1), 407.4 J·mol(-1)·K(-1), and 132.3 J·mol(-1)·K(-1), respectively.     

Experimental and computational thermochemical study of barbituric acids: structure-energy relationship in 1,3-dimethylbarbituric acid

This paper reports an experimental and computational thermochemical study on 1,3-dimethylbarbituric acid. The value of the standard (p° = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by static bomb combustion calorimetry, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -639.6 ± 1.9 kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as 92.3 ± 0.6 kJ·mol(-1). From these results a value of -547.3 ± 2.0 kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study on molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

Predicted thermochemistry and unimolecular kinetics of nitrous sulfide

The geometry of N(2)S was obtained at the CCSD(T)/aug-cc-pV(T + d)Z level of theory and energies with coupled-cluster single double triple (CCSD(T)) and basis sets up to aug-cc-pV(6 + d)Z. After correction for anharmonic zero-point energy, core-valence correlation, correlation up to CCSDT(Q) and relativistic effects, D(0) for the N-S bond is estimated as 71.9 kJ mol(-1), and the corresponding thermochemistry for N(2)S is Δ(f)H(0)(°)=205.4 kJ mol(-1) and Δ(f)H(298)(°)=202.6 kJ mol(-1) with an uncertainty of ±2.5 kJ mol(-1). Using CCSD(T)/aug-cc-pV(T + d) theory the minimum energy crossing point between singlet and triplet potential energy curves is found at r(N-N) ≈ 1.105 ? and r(N-S) ≈ 2.232 ?, with an energy 72 kJ mol(-1) above N(2) + S((3)P). Application of Troe's unimolecular formalism yields the low-pressure-limiting rate constant for dissociation of N(2)S k(0) = 7.6 × 10(-10) exp(-126 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 700-2000 K. The estimated uncertainty is a factor of 4 arising from unknown parameters for energy transfer between N(2)S and Ar or N(2) bath gas. The thermochemistry and kinetics were included in a mechanism for CO/H(2)/H(2)S oxidation and the conclusion is that little NO is produced via subsequent chemistry of NNS.     

Experimental and computational thermochemical study of 2-thiobarbituric acid: structure-energy relationship

This paper reports an experimental and computational thermochemical study on 2-thiobarbituric acid (2-thioxodihydropyrimidine-4,6(1H,5H)-dione), [CAS 504-17-6]. The value of the standard (p(0) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by bomb combustion calorimetry, using a rotatory bomb, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -(396.8 ± 0.9) kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as (118.3 ± 2.2) kJ·mol(-1). From these results a value of -(278.5 ± 2.4) kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study of the molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

Thermodynamic properties of the aqueous solution of potassium salts of some 4-((alkylcarbonyl)amino)-2-hydroxybenzoic acids at 298 and 313 K

To understand the aggregation behavior of surface-active ligands with a salycilic polar head, we undertook a systematic study of some classes of anionic surfactants where the presence and the position of the -OH and the carboxylic group differ. This paper reports the dilution heats at 298 and 313 K of aqueous solutions of potassium 4-((alkylcarbonyl)amino)-2-hydroxybenzoate (KPAS-C(n) where n stands for the number of carbon atoms in the chain) in KOH at 0.1 m, measured as a function of concentration. From the experimental data, apparent and partial molar enthalpies vs concentration were obtained. By using a pseudo-phase-transition approach, the enthalpy changes upon micelle formation (DeltaH(m)) and assuming that in the restricted range of temperature examined heat capacities are constant, the heat capacity changes have been obtained. Micelle formation enthalpies are seen to be additive with a group contribution for the methylene group of -1.5+/-0.1 kJ mol(-1) per group at 298 K and -2.3+/-0.1 kJ mol(-1) per group at 313 K, comparable with that obtained for similar anionic compounds in the same experimental conditions and for N-alkylnicotinamide chlorides (cationic surfactants). The -CH(2)- group contribution to the micelle formation heat capacities is -53+/-1 J K(-1) mol(-1).     

Thermochemistry of halomethanes CF(n)Br(4-n) (n = 0-3) based on iPEPICO experiments and quantum chemical computations

Internal energy selected bromofluoromethane cations were prepared and their internal energy dependent fragmentation pathways were recorded by imaging photoelectron photoion coincidence spectroscopy (iPEPICO). The first dissociation reaction is bromine atom loss, which is followed by fluorine atom loss in CF(3)Br and CF(2)Br(2) at higher energies. Accurate 0 K appearance energies have been obtained for these processes, which are complemented by ab initio isodesmic reaction energy calculations. A thermochemical network is set up to obtain updated heats of formation of the samples and their dissociative photoionization products. Several computational methods have been benchmarked against the well-known interhalogen heats of formation. As a corollary, we stumbled upon an assignment issue for the ClF heat of formation leading to a 5.7 kJ mol(-1) error, resolved some time ago, but still lacking closure because of outdated compilations. Our CF(3)(+) appearance energy from CF(3)Br confirms the measurements of Asher and Ruscic (J. Chem. Phys. 1997, 106, 210) and Garcia et al. (J. Phys. Chem. A 2001, 105, 8296) as opposed to the most recent result of Clay et al. (J. Phys. Chem. A 2005, 109, 1541). The ionization energy of CF(3) is determined to be 9.02-9.08 eV on the basis of a previous CF(3)-Br neutral bond energy and the CF(3) heat of formation, respectively. We also show that the breakdown diagram of CFBr(3)(+), a weakly bound parent ion, can be used to obtain the accurate adiabatic ionization energy of the neutral of 10.625 ± 0.010 eV. The updated 298 K enthalpies of formation Δ(f)H(o)(g) for CF(3)Br, CF(2)Br(2), CFBr(3), and CBr(4) are reported to be -647.0 ± 3.5, -361.0 ± 7.4, -111.6 ± 7.7, and 113.7 ± 4 kJ mol(-1), respectively.     

TPEPICO spectroscopy of vinyl chloride and vinyl iodide: neutral and ionic heats of formation and bond energies

The 0 K dissociative ionization onsets of C2H3X --> C2H3(+) + X (X = Cl, I) are measured by threshold photoelectron-photoion coincidence spectroscopy. The heats of formation of C2H3Cl (Delta H(f,0K)(0) = 30.2 +/- 3.2 kJ mol(-1) and Delta(H f,298K)(0) = 22.6 +/- 3.2 kJ mol(-1)) and C2H3I (Delta(H f,0K)(0) = 140.2 +/- 3.2 kJ mol(-1) and Delta(H f,298K)(0) = 131.2 +/- 3.2 kJ mol(-1)) and C- X bond dissociation enthalpies as well as those of their ions are determined. The data help resolve a longstanding discrepancy among experimental values of the vinyl chloride heat of formation, which now agrees with the latest theoretical determination. The reported vinyl iodide heat of formation is the first reliable experimental determination. Additionally, the adiabatic ionization energy of C2H3I (9.32 +/- 0.01 eV) is measured by threshold photoelectron spectroscopy.     

Photoion photoelectron coincidence spectroscopy of primary amines RCH2NH2 (R = H, CH3, C2H5, C3H7, i-C3H7): alkylamine and alkyl radical heats of formation by isodesmic reaction networks

Alkylamines (RCH(2)NH(2), R = H, CH(3), C(2)H(5), C(3)H(7), i-C(3)H(7)) have been investigated by dissociative photoionization by threshold photoelectron photoion coincidence spectroscopy (TPEPICO). The 0 K dissociation limits (9.754 +/- 0.008, 9.721 +/- 0.008, 9.702 +/- 0.012, and 9.668 +/- 0.012 eV for R = CH(3), C(2)H(5), C(3)H(7), i-C(3)H(7), respectively) have been determined by preparing energy-selected ions and collecting the fractional abundances of parent and daughter ions. All alkylamine cations produce the methylenimmonium ion, CH(2)NH(2)+, and the corresponding alkyl free radical. Two isodesmic reaction networks have also been constructed. The first one consists of the alkylamine parent molecules, and the other of the alkyl radical photofragments. Reaction heats within the isodesmic networks have been calculated at the CBS-APNO and W1U levels of theory. The two networks are connected by the TPEPICO dissociation energies. The heats of formation of the amines and the alkyl free radicals are then obtained by a modified least-squares fit to minimize the discrepancy between the TPEPICO and the ab initio values. The analysis of the fit reveals that the previous experimental heats of formation are largely accurate, but certain revisions are suggested. Thus, Delta(f)Ho(298K)[CH(3)NH(2)(g)] = -21.8 +/- 1.5 kJ mol-1, Delta(f)Ho(298K)[C(2)H(5)NH(2)(g)] = -50.1 +/- 1.5 kJ mol(-1), Delta(f)Ho(298K)[C(3)H(7)NH(2)(g)] = -70.8 +/- 1.5 kJ mol(-1), Delta(f)Ho(298K)[C(3)H(7)*] = 101.3 +/- 1 kJ mol(-1), and Delta(f)Ho(298K)[i-C(3)H(7)*] = 88.5 +/- 1 kJ mol(-1). The TPEPICO and the ab initio results for butylamine do not agree within 1 kJ mol-1; therefore, no new heat of formation is proposed for butylamine. It is nevertheless indicated that the previous experimental heats of formation of methylamine, propylamine, butylamine, and isobutylamine may have been systematically underestimated. On the other hand, the error in the ethyl radical heat of formation is found to be overestimated and can be decreased to +/- 1 kJ mol(-1); thus, Delta(f)Ho(298K)[C(2)H(5).] = 120.7 +/- 1 kJ mol(-1). On the basis of the data analysis, the heat of formation of the methylenimmonium ion is confirmed to be Delta(f)Ho(298K)[CH(2)NH(2)+] = 750.3 +/- 1 kJ mol(-1).     

Heats of formation of triplet ethylene, ethylidene, and acetylene

Heats of formation of the lowest triplet state of ethylene and the ground triplet state of ethylidene have been predicted by high level electronic structure calculations. Total atomization energies obtained from coupled-cluster CCSD(T) energies extrapolated to the complete basis set limit using correlation consistent basis sets (CBS), plus additional corrections predict the following heats of formation in kcal/mol: DeltaH0r(C2H4,3A1) = 80.1 at 0 K and 78.5 at 298 K, and DeltaH0t(CH3CH,3A' ') = 86.8 at 0 K and 85.1 at 298 K, with an error of less than +/-1.0 kcal/mol. The vertical and adiabatic singlet-triplet separation energies of ethylene were calculated as DeltaES-T,vert = 104.1 and DeltaES-T,adia = 65.8 kcal/mol. These results are in excellent agreement with recent quantum Monte Carlo (DMC) values of 103.5 +/- 0.3 and 66.4 +/- 0.3 kcal/mol. Both sets of computational values differ from the experimental estimate of 58 +/- 3 kcal/mol for the adiabatic splitting. The computed singlet-triplet gap at 0 K for acetylene is DeltaES-T,adia(C2H2) = 90.5 kcal/mol, which is in notable disagreement with the experimental value of 82.6 kcal/mol. The heat of formation of the triplet is DeltaH0tC2H2,3B2) = 145.3 kcal/mol. There is a systematic underestimation of the singlet-triplet gaps in recent photodecomposition experiments by approximately 7 to 8 kcal/mol. For vinylidene, we predict DeltaH0t(H2CC,1A1) = 98.8 kcal/mol at 298 K (exptl. 100.3 +/- 4.0), DeltaH0t(H2CC,3B2) = 146.2 at 298 K, and an energy gap DeltaES-T-adia(H2CC) = 47.7 kcal/mol.     

Heat of adsorption of naphthalene on Pt(111) measured by adsorption calorimetry

The heat of adsorption of naphthalene on Pt(111) at 300 K was measured with single-crystal adsorption calorimetry. The heat of adsorption on the ideal, defect-free surface is estimated to be (300 - 34 - 199(2)) kJ/mol. From this, a C-Pt bond energy for aromatic hydrocarbons on Pt(111) of approximately 30 kJ/mol is estimated, consistent with earlier results for benzene on Pt(111). There is higher heat of adsorption at very low coverage, attributed to step sites where the adsorption heat is >/=330 kJ/mol. Saturation coverage, = 1 ML, corresponds to 1.55 x 10(14) molecules/cm(2). Sticking probability measurements of naphthalene on Pt(111) give a high initial value of 1.0 and a Kisliuk-type coverage dependence that implies precursor-mediated sticking. The ratio of the hopping rate to the desorption rate of this precursor is approximately 51. Naphthalene adsorbs transiently on top of chemisorbed naphthalene molecules with a heat of adsorption of 83-87 kJ/mol.