Structure and dynamics of liquid-crystalline polymers with different molecular architectures

The structure and dynamics of liquid-crystalline polymers with different molecular architectures as revealed by multidimensional NMR Is described. Specific examples discussed Include semiflexible, rigid-rod, calamitic, and discotic systems. Structural aspects addressed are the determination of high rank order parameters, the micro-order in frozen liquid crystals and the packing of flexible side chains. Local dynamics In the glassy state, conformational dynamics and collective phenomena such as the development of convective director structures are discussed. It is demonstrated that advanced NMR spectroscopy yields highly specific information not available from conventional scattering, microscopic and relaxation techniques.     

Electron-nuclear correlations for photo-induced dynamics in molecular dimers

Ultrafast photoinduced dynamics of electronic excitation in molecular dimers is drastically affected by the dynamic reorganization of inter- and intra- molecular nuclear configuration modeled by a quantized nuclear degree of freedom. The dynamics of the electronic population and nuclear coherence is analyzed by solving the chain of coupled differential equations for population inversion, electron-vibrational correlation, etc. Intriguing results are obtained in the approximation of a small change of the nuclear equilibrium upon photoexcitation. In the limiting case of resonance between the electronic energy gap and the frequency of the nuclear mode these results are justified by comparison to the exactly solvable Jaynes-Cummings model. It is found that the photoinduced processes in the model dimer are arranged according to their time scales: (i) Fast scale of nuclear motion, (ii) intermediate scale of dynamical redistribution of electronic population between excited states as well as growth and dynamics of electron-nuclear correlation, (iii) slow scale of electronic population approach to the quasi-equilibrium distribution, decay of electron-nuclear correlation, and decrease of the amplitude of mean coordinate oscillation. The latter processes are accompanied by a noticeable growth of the nuclear coordinate dispersion associated with the overall nuclear wave packet width. The demonstrated quantum relaxation features of the photoinduced vibronic dynamics in molecular dimers are obtained by a simple method, applicable to systems with many degrees of freedom.     

Interactions between polymers and carbon nanotubes: a molecular dynamics study

We used force-field-based molecular dynamics to study the interaction between polymers and carbon nanotubes (CNTs). The intermolecular interaction energy between single-walled carbon nanotubes and polymers was computed, and the morphology of polymers adsorbed to the surface of nanotubes was investigated. Furthermore, the "wrapping" of nanotubes by polymer chains was examined. It was found that the specific monomer structure plays a very important role in determining the strength of interaction between nanotubes and polymers. The results of our study suggest that polymers with a backbone containing aromatic rings are promising candidates for the noncovalent binding of carbon nanotubes into composite structures. Such polymers can be used as building blocks in amphiphilic copolymers to promote increased interfacial binding between the CNT and a polymeric matrix.     

Chromophore localization in conjugated polymers: molecular dynamics simulation

Quantum chemical calculations of undistorted poly(phenylene vinylene) chains at zero temperature exhibit chromophores which are delocalized over the whole polymer. We demonstrate with molecular dynamics simulations that chromophore localization in agreement with experiment can be obtained if the system is simulated at finite temperature. The dependence of the chromophore localization on the temperature is investigated.     

A molecular dynamics study of epoxidized oligobutadienes with different microstructures

The thermal behavior of epoxidized oligobutadienes with cis and trans microstructures was studied and their comparative analysis was performed by means of molecular dynamics simulation. The extended conformation is retained in the epoxidized trans-isomer, whereas molecules with the cis arrangement of epoxide units acquire the random-coil conformation. The reasons behind the fact that the activity of the cis bond in cis-blocks is lower than in mixed or trans-blocks, although the oligomer with the cis microstructure has a higher reactivity, are discussed.     

Temperature-induced crystallization in concentrated suspensions of multiarm star polymers: a molecular dynamics study

In this work, we study temperature-induced crystallization in dense suspensions of multiarm star polymers. This is a continuation of a previous study, which identified and studied the emergence of "glassy" amorphous states, in accordance with experimental observations. We performed molecular dynamics simulations on two types of star polymers: 128-arm stars and 64-arm stars dissolved in n-decane in the temperature range of 20-60 degrees C. These supramolecules are modeled as "soft spheres" interacting via a theoretically developed potential of mean field. Both systems attain a crystalline structure with the characteristics of a face-centered-cubic (fcc) crystal beyond a certain temperature. Kinetics is sensitive on initial configuration. Interestingly, kinetic trapping in "temporary" energy wells leads to highly crystalline structures, yet less ordered than their genuine equilibrium fcc structure. This complication illustrates the difficulty in reaching the equilibrium state, which is crystalline at high temperatures. A structural analysis of the final conformations is presented. The effect of size dispersity and star functionality of soft spheres on microstructure is also examined. Both factors influence crystallization and their effect is quantified by our study.     

An infrared spectroscopic study of photo-induced reorientation in dye containing liquid-crystalline polymers

Infrared spectroscopy is used to study simultaneously the orientational behaviour of different segments of dye containing liquid-crystalline side group copolymers in sandwich type films of about 2 μm thickness. Under continuous irradiation with polarized light above and below T_g of the polymers both azobenzene and phenyl benzoate side groups reorient preferentially normal to the film plane leading to a strongly biaxial orientation distribution. The analysis of the kinetics reveals that the reorientation is essentially a mono-exponential process with an additional faster process only found for the azobenzene dye and assigned to the initial trans to cis isomerization step. Investigation of an isotropic copolymer system containing azobenzene in the side groups shows that an anisotropy can be induced through irradiation with polarized light that is strongly dependent on temperature.     

Structural properties of polystyrene oligomers in different environments: a molecular dynamics study

We have performed detailed molecular dynamics simulations to investigate the effects of solvation and confinement on the structure of polystyrene (PS) oligomers in four different environments, melt, concentrated solution, dilute solution and confined concentrated solution at 450 K and 1 bar, respectively. Local packing of the monomers and the solvent (toluene, good solvent) molecules were monitored by means of radial distribution functions (RDFs). We have also investigated bond, angle, and dihedral angle distributions of the monomers. End-to-end distances, radii of gyration and persistence lengths were calculated to characterize the static properties. The chain in the dilute solution was found to exhibit more stretched conformations. Dilution effect of the solvent was observed in the RDFs between the monomer centers. Only slight conformational changes in the polymers were observed by solvation. The effect of confinement was mainly seen in the density profiles, which showed an oscillatory behavior in the confined system.     

Photosensitive cholesteric polymers with azobenzene-containing chiral groups and mixtures of cholesteric copolymer with chiral-photochromic dopants

New chiral photochromic cholesteric comb-shaped acrylic copolymers and low molecular mass dopants containing azobenzene photosensitive fragments and chiral groups based on menthol and menthone were synthesized. For the copolymers and their mixtures with low molecular mass dopants, the phase behaviour and optical properties were studied. Under irradiation with UV and visible light, the untwisting of cholesteric helix takes place, and the selective light reflection maximum is shifted to the long wavelength spectral region. This shift is related to the E-Z isomerization of the azobenzene chiral groups. For the copolymers and mixtures of the cholesteric polymer with the menthyl-containing dopant, this process is thermally reversible. The specific features of the kinetics of the forward and the reverse thermal processes were characterized. It was demonstrated, that the copolymers and mixtures of the cholesteric copolymer with the menthyl-containing dopant may be used for coloured reversible recording of optical information. For such materials, their resistance with respect to the repeated 'recording-erasing' cycles was tested, and the fatigue resistance was shown to be rather high.     

Photosensitive cholesteric polymers with azobenzene-containing chiral groups and mixtures of cholesteric copolymer with chiral-photochromic dopants

New chiral photochromic cholesteric comb-shaped acrylic copolymers and low molecular mass dopants containing azobenzene photosensitive fragments and chiral groups based on menthol and menthone were synthesized. For the copolymers and their mixtures with low molecular mass dopants, the phase behaviour and optical properties were studied. Under irradiation with UV and visible light, the untwisting of cholesteric helix takes place, and the selective light reflection maximum is shifted to the long wavelength spectral region. This shift is related to the E-Z isomerization of the azobenzene chiral groups. For the copolymers and mixtures of the cholesteric polymer with the menthyl-containing dopant, this process is thermally reversible. The specific features of the kinetics of the forward and the reverse thermal processes were characterized. It was demonstrated, that the copolymers and mixtures of the cholesteric copolymer with the menthyl-containing dopant may be used for coloured reversible recording of optical information. For such materials, their resistance with respect to the repeated 'recording-erasing' cycles was tested, and the fatigue resistance was shown to be rather high.     

Quantum effects in molecular dynamics and fracture kinetics of polymers

Molecular dynamics in crystallites of a number of polymers, such as polyethylene, nylon-6, poly-(vinyl alcohol), was studied at temperatures ranging from 4.2 to 400 K using the X-ray diffraction technique. Thermal expansion of the lattice was measured by the temperature-induced displacements of diffraction maxima. The thermal expansion coefficient was found to grow from 0 to ∼10⁻⁴ K⁻¹, this fact being the evidence of the quantum statistics in the vibrational dynamics of straightened molecules over the whole temperature range. Characteristic temperatures of vibrations were estimated. The kinetics of fracture was studied using highly - oriented nylon-6 and KEVLAR-49 fibers. Tensile strength (σ_r) was measured as a function of loading rate σ and temperature (T) in the range from 4.2 to 400–600 K. The observed specific features of the σ_r(σ) and σ_r(T) curves at low temperatures correspond to tunnel scission of stressed chain molecules.     

H-Bond in methanol: a molecular dynamics study

A set of molecular dynamics (MD) simulations of methanol-d₄ at three temperatures in the liquid range (200, 250 and 300K) have been carried out. The equations of motion of 256 molecules interacting through a potential model due to Haughney et al. [J. Phys. Chem., 91 (1987) 4934] were solved using the velocity version of the Verlet algorithm. This rather large number of molecules was required for studying the behaviour of the system at momentum transfers as low as 0.25 Å⁻¹. It was found that the system experiences long period fluctuations, and therefore very long MD runs (of the order of 100 ps) are necessary in order to obtain accurate statistical averages. Computed static properties are in good agreement with those reported by Haughney et al. and the neutron weighted g(r) and the static structure factor compare favourably with available neutron diffraction data. The study of time-dependent properties through centre-of-mass autocorrelation functions (VACF, F_s(Q,t) and F(Q,t)) and their memory functions reveals features unknown in simple liquids and very similar to those found in liquid water. A close agreement between centre-of-mass single-particle autocorrelation functions and the translational part of QENS data is also observed. The dynamic structure factor for the centres of mass show distinctive side peaks in the same region of the (Q,ω) plane where recently collective excitations have been studied using coherent neutron scattering thus establishing the presence of propagating short wavelength modes. fa]Presented at the International Symposium on Hydrogen Bond Physics held at Il Ciocco, Barga, Italy, 11–14 September 1990.     

Microscopic wetting of self-assembled monolayers with different surfaces: a combined molecular dynamics and quantum mechanics study

Molecular dynamics simulations are used to study the micronature of the organization of water molecules on the flat surface of well-ordered self-assembled monolayers (SAMs) of 18-carbon alkanethiolate chains bound to a silicon (111) substrate. Six different headgroups (-CH(3), -C═C, -OCH(3), -CN, -NH(2), -COOH) are used to tune the character of the surface from hydrophobic to hydrophilic, while the level of hydration is consistent on all six SAM surfaces. Quantum mechanics calculations are employed to optimize each alkyl chain of the different SAMs with one water molecule and to investigate changes in the configuration of each headgroup under hydration. We report the changes of the structure of the six SAMs with different surfaces in the presence of water, and the area of the wetted surface of each SAM, depending on the terminal group. Our results suggest that a corrugated and hydrophobic surface will be formed if the headgroups of SAM surface are not able to form H-bonds either with water molecules or between adjacent groups. In contrast, the formation of hydrogen bonds not only among polar heads but also between polar heads and water may enhance the SAM surface hydrophilicity and corrugation. We explicitly discuss the micromechanisms for the hydration of three hydrophilic SAM (CN-, NH(2)- and COOH-terminated) surfaces, which is helpful to superhydrophilic surface design of SAM in biomimetic materials.     

Nonlinear shear of entangled polymers from nonequilibrium molecular dynamics

This study aims to use molecular dynamics (MD) simulations of Kremer–Grest (KG) chains to inform future developments of models of entangled polymer dynamics. We perform nonequilibrium MD simulations, under shear flow, for well‐entangled KG chains. We study chains of 512 and 1000 KG beads, corresponding to 8 and 15 entanglements, respectively. We compute the linear rheological properties from equilibrium simulations of the stress autocorrelation and obtain from these data the tube model parameters. Under nonlinear shear flow, we compute the shear viscosity, the first and second normal stress differences, and chain contour length. For chains of 512 monomers, we obtain agreement with the results of Cao and Likhtman (ACS Macro. Lett. 2015, 4, 1376). We also compare our nonlinear results with the Graham, Likhtman and Milner‐McLeish (GLaMM) model. We identify some systematic disagreement that becomes larger for the longer chains. We made a comparison of the transient shear stress maximum from our simulations, two nonlinear models and experiments on a wide range of melts and solutions, including polystyrene (PS), polybutadiene, and styrene–butadiene rubber. This comparison establishes that the PS melt data show markedly different behavior to all other melts and solutions and KG simulations reproduce the PS data more closely than either the GLaMM or Xie and Schweizer models. We discuss the performance of these models against the data and simulations. Finally, by imposing a rapid reversing flow, we produce a method to extract the recoverable strain from MD simulations, valid for sufficiently entangled monodisperse polymers. We explore how the resulting data can probe the melt state just before the reversing flow. © 2019 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1692–1704     

Hydration of hydrogentungstate anions at different ph conditions: a car-parrinello molecular dynamics study

Standard density functional theory calculations with a continuous model of solvation as well as Car-Parrinello molecular dynamics simulations with explicit solvent molecules are carried out to analyze the effect of the pH of the solution on the coordination sphere of the W (VI) ion. Both methodologies agree in predicting an expansion of the coordination sphere of the W (VI) ion upon a decrease in the pH. Continuous solvation models, however, are unable to predict as stable some structural isomers of a hydrated hydrogentungstate anion and tungstic acid.     

Influence of the molecular architecture on the adsorption onto solid surfaces: comb-like polymers

The processes of adsorption of grafted copolymers onto negatively charged surfaces were studied using a dissipative quartz crystal microbalance (D-QCM) and ellipsometry. The control parameters in the study of the adsorption are the existence or absence on the molecular architecture of grafted polyethyleneglycol (PEG) chains with different lengths and the chemical nature of the main chain, poly(allylamine) (PAH) or poly(L-lysine) (PLL). It was found out that the adsorption kinetics of the polymers showed a complex behavior. The total adsorbed amount depends on the architecture of the polymer chains (length of the PEG chains), on the polymer concentration and on the chemical nature of the main chain. The comparison of the thicknesses of the adsorbed layers obtained from D-QCM and from ellipsometry allowed calculation of the water content of the layers that is intimately related to the grafting length. The analysis of D-QCM results also provides information about the shear modulus of the layers, whose values have been found to be typical of a rubber-like polymer system. It is shown that the adsorption of polymers with a charged backbone is not driven exclusively by the electrostatic interactions, but the entropic contributions as a result of the trapping of water in the layer structure are of fundamental importance.     

Spreading dynamics of chain-like monolayers: a molecular dynamics study

Using large-scale molecular dynamics simulations, we have shown previously that the spreading dynamics of sessile drops on solid surfaces can be described in detail using the molecular-kinetic theory of dynamic wetting. Here we present our first steps in extending this approach to investigate the spreading dynamics of Langmuir-Blodgett monolayers. We make use of a monolayer model originally developed by Karaborni and Toxvaerd, but somewhat simplified to facilitate large-scale simulations. Our preliminary results are in good agreement with recent experimental observations and also support a molecular-kinetic interpretation in which the driving force for spreading is the lateral pressure in the monolayer. Away from equilibrium, initial spreading rates are constant and logarithmically dependent on pressure. However, near equilibrium, spreading is pseudo-diffusive and follows the square root of time. In both regimes the controlling factor is the equilibrium frequency of molecular displacements within the monolayer.     

Thermophoresis in liquids: a molecular dynamics simulation study

Thermophoresis in liquids is studied by molecular dynamics simulation (MD). A theory is developed that divides the problem in the way consistent with the characteristic scales. MD is then conducted to obtain the solution of each problem, which is to be all combined for macroscopic predictions. It is shown that when the temperature gradient is applied to the nonconducting liquid bath that contains neutral particles, there occurs a pressure gradient tangential to the particle surface at the particle-liquid interface. This may induce the flow in the interfacial region and eventually the particle to move. This applies to the material system that interacts through van der Waals forces and may be a general source of the thermophoresis phenomenon in liquids. The particle velocity is linearly proportional to the temperature gradient. And, in a large part of the given temperature range, the particle motion is in the direction toward the cold end and decreases with respect to the temperature. It is also shown that the particle velocity decreases or even reverses its sign in the lowest limit of the temperature range or with a particle of relatively weak molecular interactions with the liquid. The characteristics of the phenomenon are analyzed in molecular details.