2种三聚茚基三芳胺染料的合成及其光伏性能

以三聚茚基三芳胺为给电子单元,以绕单宁-3-乙酸为受电子单元,设计合成了2种三聚茚基三芳胺染料六乙基三聚茚胺饶丹宁乙酸(MXD8)和六乙基三聚茚胺环氧噻吩饶丹宁乙酸(MXD9)。 光学测试表明,该类染料光谱响应范围宽,摩尔吸光系数高。 结合2种染料的紫外-可见光谱和循环伏安曲线,确定了染料的电子基态和激发态能级位置。 结果表明,2种染料的能级位置符合染料敏化太阳能电池的要求。 将它们用作染料敏化太阳能电池中的光敏化剂,在AM1.5-100×10-3 W/cm2的光强下,MXD8敏化电池的开路电压(VOC)为614 mV,短路电流密度(JSC)为5.76×10-3 A/cm2,填充因子(FF)为0.66,总光电转换效率为2.33%。 尽管MXD9引入3,4乙撑二氧噻吩作为共轭桥,其光电转换效率却较MXD8低（1.27%）。 阻抗测试表明,MXD9光电转换效率较低的原因主要是电子更容易复合。 该结果表明,电子复合可能与分子共轭体系增大导致极化率增加有关。     

二氢吲哚类染料用于染料敏化太阳能电池光敏剂的比较

采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对四种二氢吲哚染料进行研究, 从中筛选出相对优秀的染料敏化太阳能电池光敏剂. 对前线分子轨道的计算表明, 二氢吲哚染料的前线分子轨道结构非常有利于染料激发态向TiO2电极的电子注入. 对真空中的紫外和可见光吸收光谱的计算表明, 二氢吲哚染料的吸收光谱与太阳辐射光谱匹配较好. 对染料分子的能级计算表明, 二氢吲哚染料的能级结构比较适合于I-/I-3作电解液的TiO2纳米晶太阳能电池的光敏剂. 二氢吲哚染料最低未占据分子轨道(LUMO) 能级均比TiO2晶体导带边能级高, 能够保证激发态染料分子高效地向TiO2电极转移电子. 二氢吲哚染料最高占据分子轨道(HOMO)的能级比I-/I-3能级低, 保证了失去电子的染料分子能够顺利地从电解液中得到电子. 与实验数据比较, 得出在提高染料敏化太阳能电池转换效率方面, 对染料的关键要求是LUMO能级的位置. 染料分子的稳定性是染料敏化太阳能电池使用寿命的关键因素. 通过对化学键键长的比较表明, 二氢吲哚染料的分子稳定性基本相同. 对计算结果的分析表明, 二氢吲哚染料1(ID1)的LUMO能级最高, 分子稳定性最好, 在酒精溶液中的吸收光谱与太阳辐射光谱匹配很好, 在同类染料中是较好的染料敏化太阳能电池光敏剂.     

双链结构有机光敏染料的合成及性能

设计合成了2个含双D-π-A结构的新型有机光敏染料DP1和DP2,利用高分辨质谱(HRMS)、核磁共振氢谱及核磁共振碳谱对其结构进行了表征。 研究了2个染料的光物理和电化学性质,并将其应用于染料敏化太阳能电池(DSSCs)的制作中。 在100×10-3 W/cm2(AM 1.5) 模拟太阳光的照射下,由染料DP2所制备的敏化太阳能电池的光电转化效率为4.10%;开路电压(Voc)、短路电流密度(Jsc)和填充因子(FF)分别为0.63 V、8.59×10-3 A/cm2和0.76。 而在同等条件下,由染料DP1所制作的染料敏化电池光电转化效率为3.83%。     

基于p型光电极的染料敏化太阳能电池研究进展

基于p型光电极的染料敏化太阳能电池是一种受到广泛关注的新型太阳能电池。根据电池的结构不同可以将其分为p型和p-n叠层型染料敏化太阳能电池。其中p-n型叠层染料敏化太阳能电池的理论光电效率可以达到43%,高于传统的基于n型TiO_2光阳极的染料敏化太阳能电池理论效率(30%),引起了科学界的高度关注。本文将总结基于p型光电极染料敏化太阳能电池(p型和p-n型叠层器件)的研究成果,重点介绍用于p型和p-n型叠层染料敏化太阳能电池的电极材料,染料及电解质的研究进展;同时总结目前该类电池发展中亟需解决的问题以及进一步提高器件效率的途径。     

染料敏化太阳能电池用敏化剂

染料敏化太阳能电池是太阳能电池的重要发展方向之一,染料敏化剂是影响电池光电转换效率的重要组分,也一直是太阳能电池材料的研究热点.经过20多年的研究,现已开发的光敏染料主要有金属配合物染料和纯有机染料两大类.本文依据染料结构特征,将金属配合物染料分为钌的多吡啶配合物、其它金属(如Os、Pt)的多吡啶配合物、卟啉及酞菁类配...     

基于p型光电极的染料敏化太阳能电池研究进展

基于p型光电极的染料敏化太阳能电池是一种受到广泛关注的新型太阳能电池。根据电池的结构不同可以将其分为p型和p-n叠层型染料敏化太阳能电池。其中p-n型叠层染料敏化太阳能电池的理论光电效率可以达到43%,高于传统的基于n型TiO₂光阳极的染料敏化太阳能电池理论效率（30%）,引起了科学界的高度关注。本文将总结基于p型光电极染料敏化太阳能电池（p型和p-n型叠层器件）的研究成果,重点介绍用于p型和p-n型叠层染料敏化太阳能电池的电极材料,染料及电解质的研究进展;同时总结目前该类电池发展中亟需解决的问题以及进一步提高器件效率的途径。     

染料敏化太阳能电池中meso-D-π-A卟啉分子设计的最新研究进展

与已经商业化的硅太阳能电池相比,染料敏化太阳能电池(Dye-sensitized solar cells, DSC)因制备工艺简单、成本低和较高的光电转换效率而成为研究的热点。本文从设计D-π-A卟啉染料的思路出发,阐述了DSC中meso-卟啉染料的给体、取代基、π桥及受体对其性能的影响。     

两种锌卟啉聚合物自组装染料敏化太阳能电池

合成了2种新型锌卟啉并与金属Mn构建配位聚合物(CPsx,x=1,2)。2种配位聚合物与锚定卟啉(ZnPA)通过金属-配体轴向配位自组装染料敏化太阳能电池(DSSC)。测试结果表明自组装电池具有较好的光电转换效率,特别是基于CPs2的装置具有较高的短路电流和转换效率。我们还对其光学、电化学及光电性能进行了研究,并通过透射电镜(TEM)对自组装体有效敏化在TiO_2电极上进行验证。     

半菁类染料敏化太阳能电池的光电化学性能研究

研究了三种不同长度碳链取代的半菁类染料2-[4-(N,N-二羧乙基)氨基]苯乙烯基-1,3,3-三甲基苯并吲哚鎓碘(BIDC1)、2-[4-(N,N-二羧乙基)氨基]苯乙烯基-1-丁基-3,3-二甲基苯并吲哚鎓碘(BIDC2)和2-[4-(N,N-二羧乙基)氨基]苯乙烯基-1-辛基-3,3-二甲基苯并吲哚鎓碘(BIDC3)敏化太阳能电池的光电化学性能。其中BIDC1的敏化效果最好,在100mW/cm2氙灯光源下,开路电压、短路电流、填充因子和转换效率分别是430mV、1.31mA/cm2、0.52、0.29%。研究表明,随着半菁染料碳链取代基的增长,光电转换效率逐渐降低。     

不同受体结构染料共敏化对染料敏化太阳电池性能的影响

为了拓宽染料敏化太阳电池对太阳光谱的响应范围,提高电池的光电转换效率,将两种含有不同受体结构（绕丹宁-3-乙酸基（RA）和氰基丙烯酸基（CA））的三苯胺染料（TR1和TC1）进行共敏化。TR1染料平伏吸附在TiO₂表面,而TC1染料直立吸附在TiO₂表面。将两种染料按照不同摩尔比共敏化TiO₂后,TC1占据TR1的部分位置,拓展光谱的同时也抑制了电荷复合,电子寿命较TR1敏化的太阳电池长。在TR1与TC1摩尔比为5：5的共敏剂溶液敏化的共敏电池器件中,短路光电流密度（J_sc）为11.7 mA/cm²,开路电压（V_oc）为704 mV,填充因子（FF）为0.73,光电转换效率（η）为6.03%。该结果明显优于单一染料敏化的电池器件。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.