巯基钴卟啉自组装膜的表征及催化性能

用自制的新型尾式巯基钴（Ⅱ）卟啉在金电极上制成自组装单分子膜,并用ＸＰＳ,ＳＥＭ和电化学的方法进行了表征。该膜对抗坏血酸具有良好的催化作用,其氧化过电位较裸金电极上降低了１４０ ｍＶ,响应电流与抗坏血酸（ＡＡ）的浓度在 ７．８ × １０－５ｍｏｌ／Ｌ～１．０×１０－２ｍｏｌ／Ｌ的范围内具有良好的线性关系,相关系数为 ０．９９８１;检测下限为 １．３ × １０－８ｍｏｌ／Ｌ（富集 １０ｍｉｎ）。     

巯基卟啉自组装膜的制备及应用研究进展

详细介绍了巯基卟啉自组装膜的几种制备方法,评述了不同制备方法的优缺点;对卟啉自组装膜在电荷转移、分子氧电催化、分子光电器件等领域的研究进展进行了评述,引用文献54篇。     

不同类型卟啉自组装膜的制备及表征

制备了不同类型的巯基卟啉自组装膜,借助多种表征技术（紫外可见光谱、电化学和X射线光电子能谱）研究了不同类型卟啉自组装膜的结构特点;研究结果表明,卟啉分子中巯基取代基数目的不同（-[SH]n-,n=1,4）,导致了卟啉环在自组装膜表面的构型不同,从而表现出不同巯基卟啉自组装膜性能的差异。 在此基础上,提出了不同巯基卟啉自组装膜的结构模型。     

锌卟啉衍生物的自组装研究

合成了一种新型的带有腺嘌呤取代基的锌卟啉并对其进行了表征。结果表明,腺嘌呤取代基与中心金属锌的轴向配位驱动了自组装。紫外可见和荧光光谱实验结果证明了由自组装而产生的卟啉低聚物的存在。     

致密二茂铁硫醇自组装膜的电化学行为

合成了11-二茂铁基十一烷基-1-硫醇(HS-(CH₂)₁₁-Fc)，利用自组装膜的特点，通过分子设计将二茂铁基团引入到自组装膜中。在金电极表面构筑有序单分子膜，制备出具有电化学活性的修饰层，研究其电化学行为，作为考察复杂电化学动力学的理想模型。进一步探究其电子传递的特点与自组装膜表面覆盖度之间的联系，提出了一种新的电子传递模型，研究电子转移与膜结构的对应关系，为更深层次的分子设计和功能组装提供理论指导。     

络合Ca2+的Au/巯基环肽自组装单层膜的交流阻抗研究

环肽在自然界中分布广泛,植物、动物、低等海洋生物、微生物、细菌、病菌等都含有微量的环肽。这些环肽的含量虽然低,但其中不少具有明显的生理活性,因此受到国内外许多化学家、生物学家和药学家的重视[1-2]。自组装单分子层膜(Self-Assembled Monolayer,SAMs)是固液界面通过化     

硝酸还原酶在巯基自组装膜上的电化学性质

应用自组装技术将硝酸还原酶 (NR)构筑在硫醇自组装单分子膜上 ,研究了Au/半胱胺 /NR和Au/半胱胺 /NR/卵磷脂两种酶电极在磷酸缓冲液中的直接电化学行为     

卟啉类自组装膜在电分析化学中的应用

评述了卟啉及其金属配合物自组装膜在电分析化学领域的应用研究进展,并简要介绍了卟啉的结构及其金属配合物的特点。对卟啉类自组装膜在电分析化学领域内的应用作了展望。     

3-巯基丙酸自组装单分子膜的研究进展

自组装单层或单分子膜(Self-assembled monolayers)的研究十分活跃,尤其是硫-金体系的单层研究更是得到科学家们的青睐。3-巯基丙酸由于可以在金基底形成稳定有序的二维自组装单分子膜,从而显示出独特的结构和表面性质。该文着重从膜的制备、膜内分子的结构、单层膜的性质以及应用等方面综述金基底上3-巯基丙酸自组装单分子膜的研究进展,并对其前景进行了展望。     

含酰胺结构的巯基自组装膜的设计与结构表征

提出了一种简便通用的合成巯基化合物的途径，以分子中的羧基CO2H为起始基团，与2-流基乙胺的氨基选择性缩合；合成了一系列具有RC（O）NHCH2CH2SH（R分别为偶氯苯衍生物，双炔衍生物及直链烷基）结构的化合物，并用接触角测量，电化学和掠角反射红外光谱（GIR-IR）等手段对这些化合物在金表面形成的自组装单分子膜进行了表征。发现4-（N－（2‘-巯基已基））酰胺偶氮苯的自组装膜表现出良好的电活性，电化学测定表面浓度为4．21×10(－10)mol·cm(-2)．当R为烷基链时，随烷基链的增长，膜的致密度与有序度增加GIR-IR证明在自组装腹中CH3（CH2）6C（O）NHCH2CH2SH的C＝O和N－H键与Au表面平行，分子轴线与Au表面近似垂直．     

偶氮苯衍生物自组装膜特征电化学的模拟

讨论了偶氮苯衍生物自组装膜的电极反应速率常数对其表面覆盖度的依赖关系的机理,建立了相应的数学模型,进一步编写计算程序对这种电化学行为做了模拟讨论。     

Preparation,Characterization, and Electrochemical Behaviors of Self-Assembled Monolayer on Gold Electrode Surface with Mercapto-Derivatized Cobaltous Porphyrin

Abstract

5-[4-(3-Mercaptopropyloxy)phenyl]-10,15,20-tris (2-chlorphenyl) porphyrin was utilized for fabricating a self-assembled monolayer (SAM) on a gold electrode. Then cobalt(II) was inserted into the the monolayer by refluxing the cobalt(II) solution in which the pre-assembled porphyrin-modified electrode was immersed. The monolayers were characterized by cyclic voltammetry (CV). Oxidation and catalytic mechanisms of dopamine on the modified electrode were also investigated and elucited respectively. Catalytic currents increased linearly with dopamine (DA) concentration in the range of 1.0 × 10^?9 to 2.0 × 10^?3 mol/L with the correlation coefficient of 0.9989. The modified electrode can be help develop a simple, quick, sensitive, and accurate method for the determination of the biomolecules such as dopamine.     

Electrochemical Characterization of the Self-Assembled Monolayer of 8-Mercaptoquinoline on Polycrystalline Gold Electrode

Self-assembled monolayer of 8-mercaptoquinoline (MQ) on the surface of gold from MQ dilute ethanolic solutions is investigated by electrochemical methods. Some aqueous redox probes, such as ferrocene carboxylic acid and Fe(CN)₆ ^4–/3– can sufficiently diffuse into the monolayer because significant diffusion-limited current peaks are observed when the redox reactions take place, showing that the monolayer is very loosely packed or dominated by defects. However, the study on the electron transfer of other aqueous probes, such as Cu²⁺ and Ru(NH₃)₆ ^3+/2+, confirm that the monolayer can block the electron transfer on the gold electrode surface rather effectively for its low ratio of pinhole defects. These studies show that the MQ monolayer on the electrode can provide an excellent barrier for penetration of some probes but cannot resist the penetration of other probes effectively. The unusual properties of the self-assembled monolayers are attributed to the entity of the very large heterocyclic moiety.     

取代苯基硫脲在Au表面的自组装

制备了对甲苯基硫脲、对氯苯基硫脲和2，4，6-三溴苯基硫脲在Au表面的自组装单分子膜（SAMs），用润湿角测量仪、椭圆偏振仪、X-射线光电子能谱仪（XPS）和原子力显微镜（AFM）对单分子膜进行了分析表征。结果表明取代苯基硫脲分子的S原子与Au形成Au-S键而诱导吸附分子形成取向排列的单分子膜。由于Au表面本身具有一定的缺陷和吸附的可逆性，使得所形成的单分子膜具有一定的缺陷。     

Fabrication of Nanostructured Surfaces Using Self-Assembled Monolayers

 We describe a new method for 3 dimensional nanostructuring on silicon surfaces using self-assembled monolayers. Partial multilayers were formed by repeated deposition of trichlorosilylheptadecanoic acid methyl ester (TSHEME) and subsequent reduction to yield a hydroxylic surface. These structures were afterwards oxidised using UV/ozone, yielding silicon oxide features. In this way both organic multilayered structures as well as ones comprised of silicon oxide have been produced with precise control of the height and invariant lateral shape of these structures. We have tried to apply samples prepared in this fashion to the calibration of AFM-scanners in vertical direction. Due to height artefacts caused by the tip-sample interaction a general calibration is not possible on the molecular scale. However, the structures produced can be used as model systems for the investigation of various sources of height artefacts and also for calibration purposes as long as samples with similar chemical and mechanical properties are to be investigated.     

Self-Assembled Monolayers of Molecular Conductors with Terpyridine-Metal Redox Switching Elements: A Combined AFM,STM and Electrochemical Study

Self-assembled monolayers (SAMs) of terpyridine-based transition metal (ruthenium and osmium) complexes, anchored to gold substrate via tripodal anchoring groups, have been investigated as possible redox switching elements for molecular electronics. An electrochemical study was complemented by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) methods. STM was used for determination of the SAM conductance values, and computation of the attenuation factor β from tunneling current–distance curves. We have shown that SAMs of Os-tripod molecules contain larger adlayer structures compared with SAMs of Ru-tripod molecules, which are characterized by a large number of almost evenly distributed small islands. Furthermore, upon cyclic voltammetric experimentation, Os-tripod films rearrange to form a smaller number of even larger islands, reminiscent of the Ostwald ripening process. Os-tripod SAMs displayed a higher surface concentration of molecules and lower conductance compared with Ru-tripod SAMs. The attenuation factor of Os-tripod films changed dramatically, upon electrochemical cycling, to a higher value. These observations are in accordance with previously reported electron transfer kinetics studies.     

邻氨基硫酚自组装膜修饰电极测定多巴胺

邻氨基硫酚自组装膜修饰电极测定多巴胺;多巴胺;邻氨基硫酚;自组装膜;金电极;方波伏安法     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.