中性富勒烯分子的直接电喷雾质谱分析

电喷雾电离是新近发展的一种质谱技术, 适用于分析在溶液中呈离子状态的物质, 具有无碎片的特点。本文根据富勒烯分子的电子亲和性能, 将富勒烯混合物的甲苯溶液直接进行电喷雾质谱分析, 检出了C60, C70, C76, C80, C82, C84, C86,C88, C90, C92, C94和C96等的负离子峰。并用萘钾作还原剂,将富勒烯混合物预先还原, 制得富勒烯负离子溶液后再作电喷雾质谱分析, 得到相同的结果。表明各类富勒烯分子在电喷雾过程中俘获电子的能力与被萘钾还原的能力相一致。     

Ruthenium(II)‐Catalyzed C−C Arylations and Alkylations: Decarbamoylative C−C Functionalizations

Ruthenium(II)biscarboxylate catalysis enabled selective C−C functionalizations by means of decarbamoylative C−C arylations. The versatility of the ruthenium(II) catalysis was reflected by widely applicable C−C arylations and C−C alkylations of aryl amides, as well as acids with modifiable pyrazoles, through facile organometallic C−C activation.     

Effect of surfactant structure on the stability of carbon nanotubes in aqueous solution

The suspending behaviors of multiple-wall carbon nanotubes (MWNTs), including pristine MWNTs (p-MWNTs) and acid-mixture-treated MWNTs (MWNTCOOH), stabilized by cationic single-chain surfactant, dodecyltrimethylammonium bromide (DTAB), and cationic gemini surfactant hexyl-alpha,beta-bis(dodecyldimethylammonium bromide) (C 12C 6C 12Br 2) were studied systematically. The surfactant structure influences the suspendability of MWNTs dramatically as well as the surfactant adsorption behavior on the nanotubes. Although both the surfactants can disperse the MWNTs effectively, they actually show different stabilizing ability. DTAB is not capable of stabilizing these two MWNTs below critical micelle concentration (CMC). However, C 12C 6C 12Br 2 can suspend both the nanotubes effectively even well below its CMC. Moreover, the adsorption of these two surfactants reaches equilibrium at twice the CMC with the original MWNT concentration of 2 mg/mL, 2 mM for C 12C 6C 12Br 2, and 30 mM for DTAB. After the adsorption equilibrium, the maximum amounts of the two suspended MWNTs in C 12C 6C 12Br 2 solution are about twice as much as those in DTAB solution. The strong hydrophobic interaction among the C 12C 6C 12Br 2 molecules and between the C 12C 6C 12Br 2 molecules and the nanotubes as well as the high charge capacity of C 12C 6C 12Br 2 lead to its much stronger adsorption ability on the MWNTs and result in its superior stabilizing ability for the MWNTs in aqueous phase. The gemini surfactant provides a possibility to effectively stabilize the MWNTs in aqueous solutions even at very low surfactant concentration well below its CMC.     

Pd-Catalyzed [3+2]-Dehydrogenative Annulation Reactions

The significance of cross dehydrogenative couplings has increased considerably in recent years. This article revisits the [3+2] C−C/N−C, C−C/O−C and C−C/C−C annulation strategy, recently reported by our group, according to a Pd(II) catalyzed dehydrogenative variant. Our original report relied on Pd(0) catalysis, using α,β-unsaturated-γ-oxy carbonyls as bis-electrophiles and resonance-stabilized acetamides or 3-oxoglutarates as C/N and O/C or C/C bis-nucleophiles, respectively. In this more modern and straightforward Pd(II)-catalyzed dehydrogenative approach, β,γ-unsaturated carbonyl derivatives replace α,β-unsaturated-γ-oxy carbonyls as bis-electrophiles. Our study includes experimental optimization and showcases the synthetic versatility in the formation of diverse heterocyclic structures, such as bicyclic lactams, furo-cycloalkanones and bicycloalkane-diones. Furthermore, a mechanism is proposed to elucidate the underlying processes involved in these reactions.     

A highly stereocontrolled total synthesis of the polyether antibiotic salinomycin. Crucial role of the 40-metoxybenzyl; (mpm) protecting group for hydroxy functions

Salinomycin was synthesized from D-glucose, D-mannitol, and ethyl L-lactate via coupling of C1–C9, C10–C17, and C18–C30 segments. Benzyl-type protecting groups as well as regio and stereoselective reactions played a crucial role.     

两种含大吸电子取代基的SnR_2Cl_2化合物的合成和晶体结构

以SnCl4和2,4,6-(CF3)3C6H2Li、2,6-(CF3)2C6H3Li为原料合成了两种含大吸电子取代基的化合物Sn[2,4,6-(CF3)3C6H2]2Cl2(缩写为SnAr2Cl2)和Sn[2,6-(CF3)2C6H3]2Cl2(缩写为Sn Ar′2Cl2),利用X射线衍射仪和核磁共振谱仪(19F NMR)表征了产物SnAr2Cl2和SnAr′2Cl2的晶体结构.     

Mass spectroscopic study of halocyanoacetylenes: Appearance energies and thermochemical data

The mass spectra of the cyanoacetylenes X? C?C? C?N, X ? H, F, CI, Br, I, are reported, together with electron impact appearance energies as determined using a modified second derivative method. From these data the enthalpies of formation and the C? X as well as the C?C bond energies are deduced. These bond energies are discussed in comparison with values of corresponding saturated and acetylenic compounds.     

Metal‐Free Cross‐Dehydrogenative Coupling (CDC): Molecular Iodine as a Versatile Catalyst/Reagent for CDC Reactions

The development of ecofriendly methods for carbon–carbon (C?C) and carbon–heteroatom (C?Het) bond formation is of great significance in modern‐day research. Metal‐free cross‐dehydrogenative coupling (CDC) has emerged as an important tool for organic and medicinal chemists as a means to form C?C and C?Het bonds, as it is atom economical and more efficient and greener than transition‐metal catalyzed CDC reactions. Molecular iodine (I₂) is recognized as an inexpensive, environmentally benign, and easy‐to‐handle catalyst or reagent to pursue CDCs under mild reaction conditions, with good regioselectivities and broad substrate compatibility. This review presents the recent developments of I₂‐catalyzed C?C, C?N, C?O, and C?S/C?Se bond‐forming reactions for the synthesis of various important organic molecules by cross‐dehydrogenative coupling.     

An entrant of smaller fullerene: C56 captured by chlorines and aligned in linear chains

A smaller fullerene C56 (#913) is stabilized, isolated, and crystallographically characterized as C56Cl10. The geometric parameters of C56Cl10 imply the otherwise unstable cage of C56 can be stabilized by chlorination through releasing its surface strains and maintaining fragmental aromaticity. An unexpected C Cl...ClC short contact, as well as the linear alignment with pearl-necklace-shaped, is revealed in C56Cl10 crystal.     

大功率LiFePO4/C复合材料的简易合成

本文采用碳热还原法,以廉价的FeCl3.6H2O、LiOH.H2O和NH4H2PO4为原料,以淀粉为还原剂和碳源,经600℃烧结制备了LiFePO4/C复合材料,方法重现性好且易规模化生产.采用X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)测试材料结构,观察材料形貌.结果表明,经600℃烧结10 h所得产物具有纯相的橄榄石型晶体结构,良好的结晶性和规整的球状形貌,粒径为60～100 nm.包覆LiFePO4晶粒的碳层厚度为2 nm左右,碳含量为5%(by mass).材料的振实密度高达1.3 g·cm-3,在0.2C倍率下首次放电比容量为162 mAh·g-1,在0.5C、1C、2C、5C和10C倍率下首次放电比容量分别为143、135、127、116和105 mAh·g-1,10C倍率下500周期循环,其比容量仍有81 mAh·g-1.     

C60 and C70 fullerene isomers generated in flames. Detection and verification by liquid chromatography/mass spectrometry analyses.

Fullerenes C60 and C70, generated by combustion, have been shown previously to be produced in controlled laminar flames accompanied by other compounds having fullerene-like characteristics. Analysis of these additional compounds by high-performance liquid chromatography, coupled on-line with mass spectrometry has identified them as isomers of the C60 and C70 fullerenes. The newly observed isomers have characteristic UV spectra and are thermally unstable, undergoing conversion to the more stable fullerenes with a half-life of about 1 h in boiling toluene (111 degrees C). Isomers of C60 and C70 fullerenes previously have been studied theoretically, but not observed experimentally. The flame-generated material also contains C60O and C70O compounds, as well as C76 and higher carbon clusters.     

Sterically Frustrated Aromatic Enes with Various Colors Originating from Multiple Folded and Twisted Conformations in Crystal Polymorphs**

Overcrowded ethylenes composed of 10-methyleneanthrone and two bulky aromatic rings contain a twisted carbon–carbon double (C=C) bond as well as a folded anthrone unit. As such, they are unique frustrated aromatic enes (FAEs). Various colored crystals of these FAEs, obtained in different solvents, correspond to multiple metastable conformations of the FAEs with various twist and fold angles of the C=C bond, as well as various dihedral angles of attached aryl units with respect to the C=C bond. The relationships between color and these parameters associated with conformational features around the C=C bond were elucidated in experimental and computational studies. Owing to the fact that they are separated by small energy barriers, the variously colored conformations in the FAE crystal change in response to various external stimuli, such as mechanical grinding, hydrostatic pressure and thermal heating.     

Fullerenes制备中C60和C70含量不同的热力学解释

本文计算了不同温度下气相反应7/6 C60=C70的热力学函数, 讨论了C60与C70之间相互转化的热力学条件。结果表明, 温度高于2828K时气相中C60比C70稳定, 温度低于2828K时气相中C70比C60稳定, 解释了由石墨制备Fullerenes时, C60和C70含量不同的原因。     

Site‐Selective Remote Radical C−H Functionalization of Unactivated C−H Bonds in Amides Using Sulfone Reagents

A general and practical strategy for remote site‐selective functionalization of unactivated aliphatic C?H bonds in various amides by radical chemistry is introduced. C?H bond functionalization is achieved by using the readily installed N‐allylsulfonyl moiety as an N‐radical precursor. The in situ generated N‐radical engages in intramolecular 1,5‐hydrogen atom transfer to generate a translocated C radical which is subsequently trapped with various sulfone reagents to afford the corresponding C?H functionalized amides. The generality of the approach is documented by the successful remote C?N₃, C?Cl, C?Br, C?SCF₃, C?SPh, and C?C bond formation. Unactivated tertiary and secondary C?H bonds, as well as activated primary C?H bonds, can be readily functionalized by this method.     

Advances in Copper‐Catalyzed C?C Coupling Reactions and Related Domino Reactions Based on Active Methylene Compounds

Active methylene compounds are a major class of reaction partners for C? C bond formation with sp² C? X (X=halide) fragments. As one of the most‐classical versions of the Ullmann‐type coupling reaction, activated‐methylene‐based C? C coupling reactions have been efficiently employed in a large number of syntheses. Although this type of reaction has long relied on noble‐metal catalysis, the renaissance of copper catalysis at the end of last century has led to dramatic developments in Ullmann C? C coupling reactions. Owing to its low cost, abundance, as well as excellent catalytic activity, the exceptional atom economy of copper catalysis is gaining widespread attention in various organic synthesis. This review summarizes the advances in copper‐catalyzed intermolecular and intramolecular C? C coupling reactions that use activated methylene species as well as in tandem reactions that are initiated by this transformation.     

Fluorometric Investigation of the Acid-Base and Complexation Behaviour of Tetracycline and Oxytetracycline

The widely used antibiotics tetracyclines have been effectively used for ailing heart attack, ulcer cure and gene therapy. The actual mechanism of their activity has been proposed to link with the complexes with many metal ions.However, the sites at which complex formation takes place are not well established. In the present work, the deprotonation sequence of tetracycline (TC) and oxytetracycline (OTC), and their specific group used to bind europium ion were investigated by examining the character of fluorescence of TC and OTC as well as that of their complexes.It was concluded that the site of complexation is coordinated with the deprotonation sequence changing with the acidity/basicity of the solution. And it was inferred that five hydrogens in TC and OTC could be dissociated. The deprotonation sequence is as follows: C(3) hydroxy, C(10) phenol, C(4) dimethylamine, C(12) hydroxy and C(12a) hydroxy. The corresponding complexation site changed with pH increase in solution as follows: C(2) acylamino and C(3) hydroxy moiety, C(10)-C(11) ketophenol moiety, C(4) dimethylamine and C(3) hydroxy moiety,C(11)-C(12)β-diketone moiety, C(12) hydroxy and C(12a) hydroxy moiety, and C(12) hydroxy and C(1) ketonemoiety respectively.     

气相反应76/70C_(70)=C_(76)(D_2)热力学函数的计算

采用统计热力学方法计算了气相C76（D2）的标准热力学函数，在此基础上计算了不同温度下气相反应76／70C70＝C76（D2）的热力学函数，讨论了C70与C76（D2）之间相互转化的热力学条件．结果表明，气相中温度低于536K时C70转化为C76（D2），温度高于536K时气相中C76（D2）转化为C70。     

Iodine and Iodide in Reductive Transformations

This review provides a comprehensive overview of strategies and methodologies for reducing C−O and heteroatomic−oxygen bonds (N−O, S−O, P−O) using I₂/I⁻, as well as other synthetically relevant bonds such as C−C, N−N, C−N, C−X, C−S. It highlights and discusses most of the mechanistic details provided by the original authors. Selected examples of other halides (Br and Cl) as reductants are also covered.     

Raman spectral changes during the solid-state polymerization of diacetylenes

Raman spectral changes resulting from the solid-state 1,4-addition polymerization of conjugated diacetylenes are reported. The monomers show an intense C?C stretching frequency near 2260 cm^?1, where as the polymers showed two strong bands, a C?C vibration near 2100 cm^?1 and a C?C vibration near 1500 cm^?1. The presence of both double and triple bonds in the polymers suggests the backbone structure (?C? C?C? C?)_n. The alternate mesomeric structure (? C?C?C?C? )_n can be eliminated as a possibility by the presence of the strong C?C vibration in the polymer. Sequential Raman spectra obtained during radiation-induced polymerization revealed intermediate spectral states between the initial monomer and final polymer. Intermediate-state vibrations first increase and then decrease in intensity as polymerization proceeds. However, the observed vibtrational frequencies of intermediate states were not dependent upon the extent of polymerization. Whether polymerization occurred thermally or as a result of radiation did not appear to influence the spectrum of the final polymer, but the observed number of intermediate states differed. Polymerization mechanisms, required molecular motions, and resulting structural changes are discussed.     

An improved synthesis of the C42–C52 segment of ciguatoxin 3C

In our previously reported method for the construction of the IJKLM-ring of ciguatoxin 3C (CTX3C), the lengthy synthetic process for the intermediate C42–C52 (L-ring) segment was problematic. Therefore, a new and improved procedure for the C42–C52 segment, having modified protecting groups, was developed. The new route includes a chirality transferring Ireland-Claisen rearrangement for the construction of the vicinal dimethyl branching at C47–48, a one-pot cyclization process for the establishment of the stereocenters at C45 and C46 as well as the γ-hydroxy δ-lactone framework corresponding to the L-ring, and Brown’s asymmetric crotylboration for the installation of the stereocenters at C43 and C44. The new C42–C52 segment was successfully coupled with the previously reported C32–C41 (I-ring) segment to produce the IJKLM-ring.