Anomalous fluorescent responses of 9-fluorenecarboxamide derivatives possessing benzo-15-crown-5.

A new fluorescent ionophore for alkaline earth metal ions, 4'-(9-fluorenecarboxamido)benzo-15-crown-5 (3), was synthesized; its photochemical behavior was investigated using UV, fluorescence, (1)H NMR, and (13)C NMR spectrometry. In the absence of a metal ion, the fluorene moiety showed weak fluorescence emission (fluorescence "Off" state). However, complexation with metal ions greatly enhanced the fluorescence intensity (fluorescence "On" state).     

Study of the absorption and emission spectroscopy of "A-B" type photosensitive compounds including two-photon chromophore and benzophenone moiety

"A-B" type photosensitive compounds including two-photon chromophore and benzophenone moiety have been designed, synthesized and characterized. The UV-vis absorption and fluorescence emission of the compounds have been extensively studied in various solvents. The results show that the absorption of "A-B" type compounds displays obvious double absorption bands, one of which at short-wavelength is related to the benzophenone moiety, the other at long-wavelength is mainly contributed by chromophore. The emission of "A-B" type compounds at 500-700nm shows an "unexpected" blue-shift comparing with that of the sole chromophore. The photosensitive compounds with amino group display strong emission in apolar solvents and have a low fluorescence quantum yields in polar solvents. In contrast, the compounds without amino group exhibit strong fluorescence emission in polar solvents, and low fluorescence quantum yields in apolar solvents. The fluorescence quantum yields of "A-B" type compounds are higher than those of the sole chromophore. The discoveries suggest that charge redistribution induced by the introduction of benzophenone moiety plays a key role on the absorption and emission spectroscopy.     

Some effects of temperature on fluorescence for pure toluene and liquid scintillator

The fluorescence maxima of pure toluene shift to longer wavelengths at lower temperatures. At room temperature the wavelength of the fluorescence maximum of pure toluene is longer than that in hexane. The red shift suggests that the fluorescence emission from excimer of toluene is promoted at lower temperatures. The fluorescence intensity from pure toluene and PPO solution in toluene increases with decreasing temperature. The differential pulse-height distributions from - and -particles shift to higher pulse-height with decreasing temperature. It is proposed that the phenomena are explained by the promoted solvent excimer fluorescence at lower temperatures.     

The "off-on" fluorescence detection of alkaline earth metal ions by using 1-naphthylacetanilide derivatives: new cation sensors based on oligo-ethylene oxides connecting 1-naphthylacetanilide at its terminals.

New fluorescent ionophores containing the 1-naphthylacetanilide moiety based on oligo-ethylene oxide (1(4) and 1(5)) have been synthesized, and their photochemical behaviors have been studied. In the absence of a metal ion, the 1-naphthylacetanilide moiety showed a weak fluorescence emission (fluorescence "off state"). However, complexation with Ca(2+) induced a large enhancement effect on the fluorescence intensity of 1(4) and 1(5) from the naphthalene ring (fluorescence "on" state). This behavior can be explained in terms of a similar twisted intramolecular charge-transfer relaxation mechanism. Such "off-on" fluorescence responses of 1(4) and 1(5) provide the digital detection of alkaline earth metal ions.     

Solvent effect of fluorescence on/off switching of diarylethene linked to excited-state intramolecular proton transfer fluorophore

Efficient fluorescence on/off switching of a dyad consisting of a photochromic diarylethene and a fluorescence dye based on excited state intramolecular proton transfer (ESIPT) was designed and demonstrated. Diarylethenes linked to (2-(2-methoxy-5-methylphenyl)benzothiazol-6-yl)- and (2-(2-hydroxy-5-methylphenyl)benzothiazol-6-yl)-9,9-dioctylfluorene moieties (1a and 2a, respectively) exhibited fluorescence on/off switching upon alternating irradiation with ultraviolet and visible light in various solvents. The fluorescence on/off contrast of 2a was found to be higher than that of 1a in n-hexane because the overlap integral between the absorption spectrum of the diarylethene closed-ring form and the fluorescence spectrum of 2a is larger than that of 1a. Diarylethene 2a exhibited green fluorescence with large Stokes shift in n-hexane, which is ascribed to the ESIPT process from the enol form to the keto form. In contrast, the fluorescence of 2a in N,N-dimethylsulfoxide (DMSO) was mainly observed as blue fluorescence from enol form, while diarylethene 1a exhibited blue fluorescence in n-hexane and DMSO. The fluorescence on/off contrast of 2a in n-hexane was higher than that in DMSO because of the difference in the spectral overlaps in n-hexane and DMSO.     

Multiple BODIPY derivatives with 1,3,5-triazine as core: balance between fluorescence and numbers of BODIPY units

The multiple BODIPY derivatives could exhibit higher fluorescence than mono-BODIPY derivatives but also might produce the stronger aggregation-induced quenching effect. It is important to investigate the relationship between fluorescence and numbers of BODIPY units. In this work, series of multiple BODIPY derivatives 2–5 with 1,3,5-triazine as core were designed and synthesized in high yields. A subtle balance between the fluorescence enhancement of multiple BODIPY units and fluorescence quenching based on H-aggregation of multiple BODIPY units was observed for these multiple BODIPY derivatives. Compound 3 bearing two BODIPY units with triazine as core presented the strongest fluorescence emission and highest fluorescence quantum yield. Compound 3 was successfully applied in viscosity measurement, exhibiting the linear relationship between fluorescence intensity (or steady-state emission anisotropy) and viscosity.     

Fluorescence emission control and switching of oxymethylcrowned spirobenzopyrans by metal ion

Oxymethylcrowned spirobenzopyran 1 and pyrenylspirobenzopyran 2 were synthesized, and fluorescence emission of their corresponding merocyanine form was examined in the presence of metal ions. For 2, fluorescence emission derived from the pyrene moiety was completely quenched by photoinduced electron transfer (PET) of the nitrogen atom when the merocyanine form was not produced, namely, without metal ions. However, when 2 was converted to the merocyanine form by the complexation of its crown ether with a metal ion, fluorescence resonance energy transfer (FRET) from the pyrene to the merocyanine moieties took place to produce fluorescence emission. This result demonstrates that the spirobenzopyran isomerization can function as a fluorescence emission switch. Fluorescence quantum yield measurement for 1 and 2 showed that fluorescence emission depends on the binding metal ion in which the fluorescence quantum yield generally increased with the increase of metal ion radius.     

7-Deazapurine and 8-aza-7-deazapurine nucleoside and oligonucleotide pyrene "click" conjugates: synthesis, nucleobase controlled fluorescence quenching, and duplex stability

7-Deazapurine and 8-aza-7-deazapurine nucleosides related to dA and dG bearing 7-octadiynyl or 7-tripropargylamine side chains as well as corresponding oligonucleotides were synthesized. "Click" conjugation with 1-azidomethyl pyrene (10) resulted in fluorescent derivatives. Octadiynyl conjugates show only monomer fluorescence, while the proximal alignment of pyrene residues in the tripropargylamine derivatives causes excimer emission. 8-Aza-7-deazapurine pyrene "click" conjugates exhibit fluorescence emission much higher than that of 7-deazapurine derivatives. They are quenched by intramolecular charge transfer between the nucleobase and the dye. Oligonucleotide single strands decorated with two "double clicked" pyrenes show weak or no excimer fluorescence. However, when duplexes carry proximal pyrenes in complementary strands, strong excimer fluorescence is observed. A single replacement of a canonical nucleoside by a pyrene conjugate stabilizes the duplex substantially, most likely by stacking interactions: 6-12 °C for duplexes with a modified "adenine" base and 2-6 °C for a modified "guanine" base. The favorable photophysical properties of 8-aza-7-deazapurine pyrene conjugates improve the utility of pyrene fluorescence reporters in oligonucleotide sensing as these nucleoside conjugates are not affected by nucleobase induced quenching.     

Selective and sensitive fluorescence "turn-on" Zn~(2+) probes based on combination of anthracene,diphenylamine and dipyrrin

Two fluorescence "turn-on" Zn~(2+) probes were developed by introducing an anthracenyl fluorophore through the linkage of a diphenylamino moiety at the 5-position of a dipyrrin moiety.Thus,two compounds with weak fluorescence were designed,synthesized,and employed as CHEF(chelation enhanced fluorescence) type fluorescence "turn-on" Zn~(2+) probes,which exhibit dramatic fluorescence enhancement upon addition of Zn~(2+),showing high sensitivities and impressive detection limits of 13 and12 nM,respectively,better than their analogues containing simple aryl substituents at the 5 positions of a di-or tripyrrin moiety.In addition,both of the probes exhibit good selectivity,short response time of less than 10 s and wide applicable pH ranges.Furthermore,the weak fluorescence nature of the probes was rationalized based on viscosity dependence measurements and theoretical calculations.These results provide further insight into the development of selective and sensitive zinc probes.     

Spectrofluorimetric determination of phenyl-<Emphasis Type="Italic">β</Emphasis>-naphthylamine used as rubber antioxidant

Phenyl--naphthylamine (PBN) used as rubber antioxidant was found to have native fluorescence. A spectrofluorimetric method for determination of PBN in multicomponent mixtures of polymer additives is described. The apparent excitation and fluorescence wavelengths used are 348 and 413.5 nm, respectively. Maximum fluorescence intensity is obtained by irradiating PBN dissolved in ethanol, at room temperature. The fluorescence varies linearly with the concentration of PBN in the range of 0.04–4 g mL^–1. The accuracy and precision of the method are reported.     

Fluorescence blinking, exciton dynamics, and energy transfer domains in single conjugated polymer chains

In order to understand exciton migration and fluorescence intensity fluctuation mechanisms in conjugated polymer single molecules, we studied fluorescence decay dynamics at "on" and "off" fluorescence intensity levels with 20 ps time resolution using MEH-PPV [poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] dispersed in PMMA. Two types of intensity fluctuations were distinguished for single chains of conjugated polymers. Abrupt intensity fluctuations (blinking) were found to be always accompanied by corresponding changes in fluorescence lifetime. On the contrary, during "smooth" intensity fluctuations no lifetime change was observed. Time-resolved data in combination with data on fluorescence emission and excitation anisotropy lead to a picture where a single polymer molecule is seen as consisting of several energy transfer domains. Exciton migration is efficient within a domain and not efficient between domains. Each domain can have several emitting low-energy sites over which the exciton continuously migrates until it decays. Emission of individual domains is often highly polarized. Fluorescence from a domain can be strongly quenched by Forster energy transfer to a quencher (hole polaron) if the domain overlaps with the quenching sphere.     

Detection of cyanide via extended π-conjugation-induced fluorescence enhancement of a metal organic framework composed of terbium(III), bipyridyl and adenosine diphosphate

A metal-organic framework (MOF) was designed and prepared from luminescent Tb(III), adenosine diphosphate (ADP) and bipyridyl (Bipy). Its green fluorescence at 545 nm is shown to enable the fluorometric detection of cyanide ion based on the principle of π-conjugation-induced fluorescence enhancement. The fluorescence of the probe is strongly increased by cyanide due to extended π-conjugation between probe MOF and cyanide which sensitizes the fluorescence of Tb(III). This effect can be used to quantify cyanide at levels as low as 30 nM in aqueous solution. The method was applied to the determination of cyanide in saliva samples. The lack of interference by acetate and fluoride is a specific feature of this method. The method based on the principle of π-conjugation-induced fluorescence enhancement provides a new sensing way for widely used fluorescence assays.

Open image in new window

Graphical abstract A cyanide-selective Tb-ADP-Bipy MOF was designed and synthesized for the detection of cyanide based on the principle of π-conjugation-induced fluorescence enhancement.

     

Investigation of nitroxoline-human serum albumin interactions by spectroscopic methods

Nitroxoline is a wide spectrum antibacterial and is one of the most important urinary antiseptics.The interaction between nitroxoline and human serum albumin(HSA)has been investigated systematically by fluorescence spectroscopy,synchronous fluorescence,three-dimensional fluorescence,CD spectroscopy and UV-Vis absorption spectroscopy.The results indicated that the quenching of HSA by nitroxoline was static.The corresponding thermodynamic parameters △H,△S and △G calculated according to van’t Hoff equation revealed that the intermolecular forces acting between nitroxoline and HSA were mainly hydrogen bonding and van der Waals forces.The conformational changes in the interaction were studied by synchronous fluorescence,CD spectroscopy and three-dimensional fluorescence spectra which showed changes in the microenvironment and conformation of HSA.     

Nondestructive X-ray Fluorescence Determination of Some Elements in Plant Materials

Possible matrix effects in the direct x-ray fluorescence determination of Na, Mg, Al, Si, P, K, Ca, Mn, Fe, S, Sr, and Cl in powdered plant materials were considered; their contributions were evaluated, and dominant effects were estimated that should be taken into account to ensure the required accuracy of the analytical results. It was shown that the main matrix effects are the absorption and scattering of the incident and fluorescence x-rays by the sample as well as the additional excitation of the analyte fluorescence by the fluorescence of heavier elements. The efficiency of correction with theoretical coefficients for their account was shown.     

Fluorescence of 3,5-diethoxycarbonyl-1,4-dihydropyridine derivatives and their anions

The fluorescence spectra of a group of 3,5-diethoxycarbonyl-1,4-dihydropyridine (1,4-DHP) derivatives were investigated. The introduction of electron-acceptor N-substituents and 2,6-methyl groups decreases Q markedly. The fluorescence spectra of 1,4-DHP anions are shifted bathofluorically, and the Q values are higher than for the corresponding 1,4-DHP. The fluorescence spectra have large Stokesian shifts, which are decreased for 1,4-DHP anions. A good correlation exists between the _max values of the fluorescence bands of 1,4-DHP anions and the Hammett _p ⁺ constants of the 4-R-aryl substituents.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 67–70, January, 1988.     

A new tetrathiafulvalene-anthracence dyad fusion with the crown ether group: fluorescence modulation with Na+ and C60, mimicking the performance of an "AND" logic gate

In this Note, we describe a new TTF-anthracene dyad fusion with the crown ether unit. It is interesting to find that the fluorescence of this new dyad can be modulated with Na+ and C60, and its fluorescence intensity can be largely enhanced only in the presence of both Na+ and C60. Such fluorescence modulation behavior mimics the performance of a two-input "AND" logic gate.     

Strong Fluorescence of Poly(N‐vinylpyrrolidone) and Its Oxidized Hydrolyzate

Discovering fluorescence of existing compounds, which are generally regarded as non‐fluorescent, is of important academic and technical significance. This article reports the fluorescence of common compounds containing pyrrolidone ring(s) and their oxidized hydrolyzates. Poly(N‐vinylpyrrolidone) (PVP), polymerized from a very weak fluorescent monomer N‐vinyl‐2‐pyrrolidone (NVP), exhibits strong intrinsic fluorescence. Moreover, the fluorescence of its “hydrolyzate” is dramatically enhanced by about 1000 times. The “hydrolyzate” of N‐methyl‐pyrrolidone (NMP) also exhibits significantly enhanced fluorescence. By studying the chemical structures and fluorescence of the hydrolyzates, the enhanced fluorescence is attributed to the formation of secondary amine oxide. The much stronger fluorescence of the polymers compared to the corresponding small molecular compounds is ascribed to the “aggregation‐induced emission” (AIE) effect of the luminophores. PVP and its oxidized hydrolyzate also show some phenomena different to the common AIE effect. The fluorescence of PVP and its oxidized hydrolyzate shows stimuli response to metal ions and pH values. This study introduces novel fluorescent materials for various potential applications.

     

Spectral luminescence properties of 1- and 2-alkyl(cycloalkyl) derivatives of benzo[f]quinoline

The absorption and fluorescence spectra of alcohol solutions of 3-aryl-substituted benzo[f]-quinolines were investigated, and the fluorescence quantum yields were measured. It was established that the indicated compounds have intense absorption in the UV region and fluorescence at 350–450 nm. The fluorescence quantum yields range from 5 to 70%, depending on the substituents. The introduction of aromatic substituents in the 1 and 3 positions of benzo-[f]quinoline ring raises the fluorescence quantum yields. A methyl group in the 2 position of the molecule leads to a decrease in the fluorescence quantum yield. Benzo[f]quinoline derivatives that contain a cyclopentene ring in the 1 and 2 positions fluoresce intensely (=40–60%), while cyclohexene and cycloheptene condensed in the same positions cause a decrease in the fluorescence yield to 7–13%; this is associated with the three-dimensional structure of these molecules.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1237–1240, September, 1977.     

The Interactions Between Nonionic Surfactants and Cyclodextrins Studied by Fluorescence Measurements

The complex formation between some nonionic surfactants and -, - and -cyclodextrin was studied by fluorescence measurements. The relative fluorescence intensity of a solute containing a nonionic surfactant at a constant concentration far below the critical micelle concentration (CMC) are enhanced by the addition of cyclodextrins. Non linear type equations were derived to obtain stability constants by fluorescence measurements for inclusion complexes formed between cyclodextrins and the nonionic surfactants. In most cases 1 : 1- and 2 : 1-complexes (ratio of cyclodextrin to surfactant) are formed.     

Ultra narrow PbS nanorods with intense fluorescence

We report on the narrowest "free" quantum rods of PbS with 1.7 nm diameter produced in a single step under bench-top reaction conditions. The nanorods exhibit molecule-like discrete narrow optical behavior with high fluorescence quantum yield. We propose a new macroscopic vortex assembly formation by simple spin casting route. Interestingly, the pattern generates fluorescence along its line from the nanorod domains. The ultra narrow nanorods with strong discrete fluorescence and robust stability could be useful in biological labeling, fluorescence resonance energy transfer, and optoelectronics applications, as well as to verify the theories in the very strong confinement regime.