Nickel complexes supported by quinoline-based ligands: synthesis, characterization and catalysis in the cross-coupling of arylzinc reagents and aryl chlorides or aryltrimethylammonium salts

Lithium and nickel complexes bearing quinoline-based ligands have been synthesized and characterized. Reaction of 8-azidoquinoline with Ph(2)PNHR (R = p-MeC(6)H(4), Bu(t)) affords N-(8-quinolyl)iminophosphoranes RNHP(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N) (1a, R = p-MeC(6)H(4); 1b, R = Bu(t). C(9)H(6)N = quinolyl)). Reaction of 1a with (DME)NiCl(2) generates a nickel complex [NiCl(2){N(8-C(9)H(6)N)[double bond, length as m-dash]P(Ph(2))NH(p-MeC(6)H(4))}] (2a). Treatment of 1b with (DME)NiCl(2) and following with NaH produces [NiCl{(1,2-C(6)H(4))P(Ph)(NHBu(t))[double bond, length as m-dash]N(8-C(9)H(6)N)}] (4). Complex 4 was also obtained by reaction of (DME)NiCl(2) with [Li{(1,2-C(6)H(4))P(Ph)(NHBu(t))[double bond, length as m-dash]N(8-C(9)H(6)N)}] (5) prepared through lithiation of 1b. Reaction of 2-PyCH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N) (6, Py = pyridyl) and PhN[double bond, length as m-dash]C(Ph)CH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N) (8), respectively, with (DME)NiCl(2) yields two five-coordinate N,N,N-chelate nickel complexes, [NiCl(2){2-PyCH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N)}] (7) and [NiCl(2){PhN[double bond, length as m-dash]C(Ph)CH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N)}] (9). Similar reaction between Ph(2)PCH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N) (10) and (DME)NiCl(2) results in five-coordinate N,N,P-chelate nickel complex [NiCl(2){Ph(2)PCH(2)P(Ph(2))[double bond, length as m-dash]N(8-C(9)H(6)N)}] (11). Treatment of [(8-C(9)H(6)N)N[double bond, length as m-dash]P(Ph(2))](2)CH(2) (12) [prepared from (Ph(2)P)(2)CH(2) and 2 equiv. of 8-azidoquinoline] with LiBu(n) and (DME)NiCl(2) successively affords [NiCl{(8-C(9)H(6)N)NP(Ph(2))}(2)CH] (13). The new compounds were characterized by (1)H, (13)C and (31)P NMR spectroscopy (for the diamagnetic compounds), IR spectroscopy (for the nickel complexes) and elemental analysis. Complexes 2a, 4, 7, 9, 11 and 13 were also characterized by single-crystal X-ray diffraction techniques. The nickel complexes were evaluated for the catalysis in the cross-coupling reactions of arylzinc reagents with aryl chlorides and aryltrimethylammonium salts. Complex 7 exhibits the highest activity among the complexes in catalyzing the reactions of arylzinc reagents with either aryl chlorides or aryltrimethylammonium bromides.     

Alkyne insertion into cyclometallated pyrazole and imine complexes of iridium, rhodium and ruthenium; relevance to catalytic formation of carbo- and heterocycles

The cyclometallated complexes [MCl(C^N)(ring)] (HC^N = 2-phenylpyrazole, M = Ir, Rh ring = Cp*; M = Ru, ring = p-cymene) readily undergo insertion reactions with RC≡CR (R = CO(2)Me, Ph) to give mono insertion products, the rhodium complex also reacts with PhC≡CH regiospecifically to give an analogous product. The products of the reactions of the cyclometallated imine complexes [MCl(C^N)Cp*] (HC^N = PhCH=NR, R = Ph, CH(2)CH(2)OMe, Me; M = Ir, Rh) with PhC≡CPh depend on the substituent R; when R = CH(2)CH(2)OMe a monoinsertion is observed, however for R = Me the initial insertion product is unstable, undergoing reductive elimination with loss of the organic fragment, and for R = Ph no metal-containing product is isolated. With PhC≡CH the cyclometallated imine complexes can give mono or di-insertion products. The implications for catalytic synthesis of carbo- and heterocycles by a tandem C-H activation, alkyne insertion mechanism are discussed.     

Zirconocene-mediated and/or catalyzed unprecedented coupling reactions of alkoxymethyl-substituted styrene derivatives

Reactions of o-(alkoxymethyl)styrene derivatives with a stoichiometric amount of zirconocene-butene complex (zirconocene equivalent, "Cp(2)Zr") brought about an insertion of the zirconocene species into a benzylic carbon-oxygen bond. The oxidative insertion of Cp(2)Zr to the benzylic carbon-oxygen bond is a result of sequential reactions: (i) formation of zirconacyclopropane by the ligand exchange with o-(alkoxymethyl)styrene, (ii) elimination of the alkoxy group through an aromatic conjugate system giving metalated o-quinodimethane species, and (iii) transfer of zirconium metal to the benzylic position. Through use of a catalytic amount of "Cp(2)Zr", however, unprecedented homo-coupling reactions (dimerization) of o-(alkoxymethyl)styrene derivatives occurred to give a tetracyclic compound. On the other hand, reactions of o-(1-alkoxyisopropyl)styrene derivatives gave rise to the analogous tetracyclic compounds regardless of the amount of "Cp(2)Zr" (stoichiometric or catalytic). Heterocoupling product between o-(1-alkoxyisopropyl)styrene and styrene congeners was obtained in high cis stereo- and regioselectivity by treating o-(1-alkoxyisopropyl)styrene derivatives with "Cp(2)Zr" in the presence of an excess amount of styrene derivatives.     

Cationic diiron and diruthenium μ-allenyl complexes: synthesis, X-ray structures and cyclization reactions with ethyldiazoacetate/amine affording unprecedented butenolide- and furaniminium-substituted bridging carbene ligands

The novel cationic diiron μ-allenyl complexes [Fe(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 4a; R = Ph, 4b) have been obtained in good yields by a two-step reaction starting from [Fe(2)Cp(2)(CO)(4)]. The solid state structures of [4a][CF(3)SO(3)] and of the diruthenium analogues [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}][BPh(4)] (R = Me, [2a][BPh(4)]; R = Ph, [2c][BPh(4)]) have been ascertained by X-ray diffraction studies. The reactions of 2c and 4a with Br?nsted bases result in formation of the μ-allenylidene compound [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(1)-C(α)=C(β)=C(γ)(Ph)(2)}] (5) and of the dimetallacyclopentenone [Fe(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)=C(β)(C(γ)(Me)CH(2))C(=O)}] (6), respectively. The nitrile adducts [Ru(2)Cp(2)(CO)(NCMe)(μ-CO){μ-η(1):η(2)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 7a; R = Ph, 7b), prepared by treatment of 2a,c with MeCN/Me(3)NO, react with N(2)CHCO(2)Et/NEt(3) at room temperature, affording the butenolide-substituted carbene complexes [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(R)(2)OC(=O)C[upper bond 1 end](H)] (R = Me, 10a; R = Ph, 10b). The intermediate cationic compound [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (9) has been detected in the course of the reaction leading to 10a. The addition of N(2)CHCO(2)Et/NHEt(2) to 7a gives the 2-furaniminium-carbene [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (11). The X-ray structures of 10a, 10b and [11][BF(4)] have been determined. The reactions of 4a,b with MeCN/Me(3)NO result in prevalent decomposition to mononuclear iron species.     

C-H functionalization polycondensation of chlorothiophenes in the presence of nickel catalyst with stoichiometric or catalytically generated magnesium amide

Polymerization of 2-chloro-3-substituted thiophenes proceeded with a stoichiometric amount of magnesium amide, TMPMgCl·LiCl, or a combination of a Grignard reagent and a catalytic amount of secondary amine in the presence of a nickel catalyst. Although the nickel-catalyzed polymerization with NiCl(2)dppe, which exhibited high catalytic activity in the reaction of bromothiophenes, was less effective, use of a nickel catalyst bearing N-heterocyclic carbene as a ligand was found to induce polymerization with controlled molecular weight and molecular weight distribution.     

Simultaneous bridge-localized and mixed-valence character in diruthenium radical cations featuring diethynylaromatic bridging ligands

A series of bimetallic ruthenium complexes [{Ru(dppe)Cp*}(2)(μ-C≡CArC≡C)] featuring diethynylaromatic bridging ligands (Ar = 1,4-phenylene, 1,4-naphthylene, 9,10-anthrylene) have been prepared and some representative molecular structures determined. A combination of UV-vis-NIR and IR spectroelectrochemical methods and density functional theory (DFT) have been used to demonstrate that one-electron oxidation of compounds [{Ru(dppe)Cp*}(2)(μ-C≡CArC≡C)](HC≡CArC≡CH = 1,4-diethynylbenzene; 1,4-diethynyl-2,5-dimethoxybenzene; 1,4-diethynylnaphthalene; 9,10-diethynylanthracene) yields solutions containing radical cations that exhibit characteristics of both oxidation of the diethynylaromatic portion of the bridge, and a mixed-valence state. The simultaneous population of bridge-oxidized and mixed-valence states is likely related to a number of factors, including orientation of the plane of the aromatic portion of the bridging ligand with respect to the metal d-orbitals of appropriate π-symmetry.     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.     

Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

Synthesis, spectroscopy and electronic structure of the vinylidene and alkynyl complexes [W(C=CHR)(dppe)(η-C₇H₇)](+) and [W(C≡CR)(dppe)(η-C₇H₇](n+) (n = 0 or 1)

The first examples of vinylidene complexes of the cycloheptatrienyl tungsten system [W(C=CHR)(dppe)(η-C?H?)](+) (dppe = Ph?PCH?CH?PPh?; R = H, 3; Ph, 4; C?H?-4-Me, 5) have been synthesised by reaction of [WBr(dppe)(η-C?H?)], 1, with terminal alkynes HC≡CR; a one-pot synthesis of 1 from [WBr(CO)?(η-C?H?)] facilitates its use as a precursor. The X-ray structure of 4[PF?] reveals that the vinylidene ligand substituents lie in the pseudo mirror plane of the W(dppe)(η-C?H?) auxiliary (vertical orientation) with the phenyl group located syn to the cycloheptatrienyl ring. Variable temperature 1H NMR investigations on [W(C=CH?)(dppe)(η-C?H?)][PF?], 3, estimate the energy barrier to rotation about the W=C(α) bond as 62.5 ± 2 kJ mol?1; approximately 10 kJ mol?1 greater than for the molybdenum analogue. Deprotonation of 4 and 5 with KOBu(t) yields the alkynyls [W(C≡CR)(dppe)(η-C?H?)] (R = Ph, 6; C?H?-4-Me, 7) which undergo a reversible one-electron oxidation at a glassy carbon electrode in CH?Cl? with E(?) values approximately 0.12 V negative of Mo analogues. The 17-electron radicals [6](+) and [7](+) have been investigated by spectroelectrochemical IR, UV-visible and EPR methods. The electronic structures of representative vinylidene (3) and alkynyl (6) complexes have been investigated at the B3LYP/Def2-SVP level. In both cases, electronic structure is characterised by a frontier orbital with significant metal d(z2)character and this dominates the structural and spectroscopic properties of the system.     

Unusual thiolate-bridged diiron clusters bearing the cis-HN═NH ligand and their reactivities with terminal alkynes

A series of well-defined thiolate-bridged diiron clusters bearing the cis-HN═NH ligand, [Cp(?)Fe(μ-SEt)(2)(μ-η(1):η(1)-HN═NH)FeCp(?)][PF(6)] (Cp(?) = η(5)-C(5)Me(4)H or η(5)-C(5)Me(5)), are successfully prepared in high yields and fully characterized by spectroscopy and X-ray crystallography. Under moderate conditions, these new Fe/S clusters exhibit high activity, not only for the catalytic cleavage of the N-N bond of hydrazines but also for the activation and coupling of terminal alkynes.     

Synthesis, structure, and reactivity of 13-vertex carboranes and 14-vertex metallacarboranes

Syntheses, properties, and synthetic applications of 13-vertex closo- and nido-carboranes are reported. Reactions of the nido-carborane salt [(CH2)3C2B10H10]Na2 with dihaloborane reagents afforded 13-vertex closo-carboranes 1,2-(CH2)3-3-R-1,2-C2B11H10 (R = H (2), Ph (3), Z-EtCH=C(Et) (4), E-(t)BuCH=CH (5)). Treatment of the arachno-carborane salt [(CH2)3C2B10H10]Li4 with HBBr2.SMe2 gave both the 13-vertex carborane 2 and a 14-vertex closo-carborane (CH2)3C2B12H12 (8). On the other hand, the reaction of [C6H4(CH2)2C2B10H10]Li4 with HBBr2.SMe2 generated only a 13-vertex closo-carborane 1,2-C6H4(CH2)2-1,2-C2B11H11 (9). Electrophilic substitution reactions of 2 with excess MeI, Br2, or I2 in the presence of a catalytic amount of AlCl3 produced the hexa-substituted 13-vertex carboranes 8,9,10,11,12,13-X6-1,2-(CH2)3-1,2-C2B11H5 (X = Me (10), Br (11), I (12)). The halogenated products 11 and 12 displayed unexpected instability toward moisture. The 13-vertex closo-carboranes were readily reduced by groups 1 and 2 metals. Accordingly, several 13-vertex nido-carborane dianionic salts [nido-1,2-(CH2)3-1,2-C2B11H11][Li2(DME)2(THF)2] (13), [[nido-1,2-(CH2)3-1,2-C2B11H11][Na2(THF)4]]n (13a), [[nido-1,2-(CH2)3-3-Ph-1,2-C2B11H10][Na2(THF)4]]n (14), [[nido-1,2-C6H4(CH2)2-1,2-C2B11H11][Na2(THF)4]]n (15), and [nido-1,2-(CH2)3-1,2-C2B11H11][M(THF)5] (M = Mg (16), Ca (17)) were prepared in good yields. These carbon-atom-adjacent nido-carboranes were not further reduced to the corresponding arachno species by lithium metal. On the other hand, like other nido-carborane dianions, they were useful synthons for the production of super-carboranes and supra-icosahedral metallacarboranes. Interactions of 13a with HBBr2.SMe2, (dppe)NiCl2, and (dppen)NiCl2 gave the 14-vertex carborane 8 and nickelacarboranes [eta5-(CH2)3C2B11H11]Ni(dppe) (18) and [eta5-(CH2)3C2B11H11]Ni(dppen) (19), respectively. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Some were further confirmed by single-crystal X-ray diffraction studies.     

Modulation of electronic couplings within Ru2-polyyne frameworks

Dimers of [Ru(2)(Xap)(4)] bridged by 1,3,5-hexatriyn-diyl (Xap are 2-anilinopyridinate and its aniline substituted derivatives), [Ru(2)(Xap)(4)](2)(μ-C(6)) (1), were prepared. Compounds 1 reacted with 1 equiv of tetracyanoethene (TCNE) to yield the cyclo-addition/insertion products [Ru(2)(Xap)(4)](2){μ-C≡CC(C(CN)(2))-C(C(CN)(2))C≡C} (2) and 1 equiv of Co(2)(dppm)(CO)(6) to yield the η(2)-Co(2) adducts to the middle C≡C bond, [Ru(2)(Xap)(4)](2)(μ-C(6))(Co(2)(dppm)(CO)(4)) (3). Voltammetric and spectroelectrochemical studies revealed that (i) two Ru(2) termini in 1 are sufficiently coupled with the monoanion (1(-)) as a Robin-Day class II/III mixed valence species; (ii) the coupling between two Ru(2) is still significant but somewhat weakened in 3; and (iii) the coupling between two Ru(2) is completely removed by the insertion of TCNE in 2. The attenuation of electronic couplings in 2 and 3 was further explored with both the X-ray diffraction study of representative compounds and spin-unrestricted DFT calculations.     

Reactions of 1-ethyl-1,2-diphosphole with acetylenes

Russian Chemical Bulletin - The cycloaddition of 1-ethyl-3,4,5-triphenyl-1,2-diphosphacyclopenta-2,4-diene to acetylenes R1C≡CR2 (R1 = R2 = CO2Me; R1 = Ph, R2 = H) gives phosphinine along...     

环戊二烯基钌配合物催化的高选择性苯乙炔二聚反应

Transition metal vinylidene complexes (M=C=CHR) have attracted a great deal of attention in recent years as a new type of organometallic intermediates that may have unusual reactivity[1]. Their reactivity has been explored and their application to organic synthesis is developed[2]. Recent reports on the ruthenium-vinylidene complexes[3]suggest that the reaction of ruthenium-vinylidene complexes with a base generates the coordinatively unsaturated ruthenium acetylide species, which are involved in a number of catalytic and stoichiometric reactions of alkynes. For example,the coordinatively unsaturated ruthenium acetylide species C5Me5Ru(PPh3)-C≡CPh,formed from the reaction of the vinylidene complex C5Me5Ru(PPh3) (Cl)=C=CHPh with a base was reactive toward a variety of small molecules and active in catalytic dimerization of terminal alkynes[4]. The dimerization of terminal alkyne is an effective method of forming enynes, but its synthetic application in organic synthesis has been limited dueto low selectivity for dimeric products[5]. In this communication, we report that three ruthenium complexes were used as catalysts for the highly selective dimerization of phenylacetylene.     

Visible-light generation of the naked 12-electron fragment C5H5Fe+: alkyne-to-vinylidene isomerization and synthesis of polynuclear iron vinylidene and alkynyl complexes including hexairon stars

Visible-light photolysis of [FeCp(η(6)-C(6)H(5)CH(3))][PF(6)] using a simple 100-W bulb or a compact fluorescent light bulb in the presence of terminal alkynes and dppe yielded the vinylidene complexes [FeCp(═C═CHR)(dppe)][PF(6)] that were deprotonated by t-BuOK to yield the alkynyl complexes [FeCp(-C≡CR)(dppe)]. The reaction has been extended to the synthesis of bis-, tris, tetra-, and hexanuclear iron complexes including three alkynes of the ferrocenyl family.     

Terminal Alkynes in the Coordination Sphere of Titanocene Complexes – Elementary Steps in Catalytic Dimerizations and Oligomerizations of Alkynes

The titanocene acetylene complex [Cp*₂Ti(η²-Me₃SiC≡CSiMe₃)] ( 14 ) reacts with 1-alkynes such as phenylacetylene ( 15 a ), 1-hexyne ( 15 b ), 1-dodecyne ( 15 c ) and trimethylsilylacetylene ( 15 d ) by ligand exchange and proton shift, to yield exclusively the 1-alkenyltitanocene acetylides [Cp*₂Ti(CH=CHR)(C≡CR)] ( 21 ) (R = Ph ( 21 a ), CH₃(CH₂)₃ ( 21 b ), CH₃(CH₂)₉ ( 21 c ), SiMe₃ ( 21 d )). The X-ray structure of 21 a is presented. In reaction of acetylene HC≡CH ( 15 e ) with 14 other products are formed. However, no intermediates, like [Cp*₂Ti(η²-RC≡CH)] ( 17 ), [Cp*₂Ti(H)C≡CR] ( 17 ) or [Cp*₂Ti=C=CHR] ( 22 ) in reactions of 14 with 15 are detectable. On the other hand, a stable titanocenehydride [Cp*₂Ti(H)OCH₃] ( 23 ) is obtained by oxidative addition of CH₃OH with Cp*₂Ti, generated from 14 .     

Structures and reactivity of Zr(IV) chlorobenzene complexes

The synthesis, structures, and unusual reactivity of (C5R5)2ZrR'(ClPh)+ chlorobenzene complexes are described. The reaction of (C5R5)2ZrR'2 with [Ph3C][B(C6F5)4] in C6D5Cl affords [(C5R5)2ZrR'(ClC6D5)][B(C6F5)4] chlorobenzene complexes (1-d5, R' = CH2Ph and (C5R5)2 = (C5H5)2; 2a-d-d5, R' = Me and (C5R5)2 = rac-(1,2-ethylene(bis)indenyl) (2a), (C5H5)2 (2b), (C5H4Me)2 (2c), (C5Me5)2 (2d, C5Me5 = Cp*)). Complexes 1 and 2b,c are thermally robust but are converted to [{(C5R5)2Zr(mu-Cl)}2][B(C6F5)4]2 (4b,c) by a photochemical process in ClPh solution. In contrast, 2d undergoes facile thermal ortho-C-H activation to yield [Cp*2Zr(eta2-C,Cl-2-Cl-C6H4)][B(C6F5)4] (5), which slowly rearranges to [(eta4,eta1-C5Me5C6H4)Cp*ZrCl][B(C6F5)4] (6) via beta-Cl elimination and benzyne insertion into a Zr-CCp* bond. The higher thermal reactivity of 2d versus that of 1 and 2b,c is attributed to steric crowding associated with the Cp* ligands of 2d, which forces a ClPh ortho-hydrogen close to the Zr-Me group.     

Alkyne-vinylidene coupling in the reactions of the alkyne complex Os3(μ-CO)(CO)9(μ3-Me3C2Me) with Me3SiC≡CR (R=Me, Bun). The structure and stereodynamic behavior of clusters Os3(CO)9{μ3-C(SiMe3)=C(Me)C=C(SiMe3)=C(Me)C=C(SiMe3)R} containing an osmacyclobutene moietycontaining an osmacyclobutene moiety

Reactions of the alkyne cluster Os₃(μ-CO)(CO)₉(μ₃-Me₃C₂Me) with alkynes Me₃SiC≡CR (R=Me, Buⁿ) in refluxing hexane result in the formation of clusters Os₃(CO)₉{μ₃-C(SiMe₃)=C(Me)C=C(SiMe₃)=C(Me)C=C(SiMe₃)R} (2a: R=Me;3a: R=Buⁿ). The dienediyl ligand in these complexes is formed by alkyne-vinylidene coupling, with vinylidene generated in the course of reaction from the alkyne molecule by the acetylene-vinylidene rearrangement involving a 1,2-shift of the Me₃Si group. The structure of cluster3a was determined by X-ray structural analysis. The dienediyl ligand is coordinated to three metal atoms of the cluster framework by two π-ethylene bonds with two osmium atoms and two σ-bonds with the third osmium atom with the formation of the osmacyclobutene moiety. The¹H and¹³C NMR study of¹³CO-enriched samples of clusters2a and3a revealed the stereochemical nonrigidity of these molecules due to the exchange of the hydrocarbon and carbonyl ligands.     

Ruthenacarboranes from the reaction of nido-1,2-(Cp*RuH)2B3H7 with HC [triple bond] CCO2Me, Cp* = eta5-C5Me5. Hydrometalation, alkyne incorporation, and functional group modification via cooperative metal-boron interactions within a metallaborane cluster framework

Reaction of nido-1,2-(Cp*RuH)2B3H7, 1, and methyl acetylene monocarboxylate under kinetic control generates nido-1,2-(Cp*Ru)2(mu-C[[CO2Me]Me])B3H7 (a pair of geometric isomers, 3 and 5) and nido-1,2-(Cp*Ru)2(1,3-mu-C[[CH2CO2Me]H])B3H7, 4, which display the first examples of exo-cluster mu-alkylidene Ru-B bridges generated by hydrometalation of an alkyne on the cluster framework. Both 3 and 5, but not 4, rearrange into arachno-2,8-mu(C)-5-eta1(O)-Me[CO2Me]C-1,2-(Cp*Ru)2B3H7, 2, in which an unprecedented intramolecular coordination of the carbonyl oxygen atom of the alkyne substituent to a boron framework site opens the ruthenaborane skeleton. Compound 2, in turn, is an intermediate in the formation of the ruthenacarborane nido-1,2-(Cp*Ru)2-3-OH-4-OMe-5-Me-4,5-C2B2H5, 12, in which the carbonyl-oxygen double bond has been cleaved as its oxygen atom inserts into a B-H bond and the carbonyl carbon inserts into the metallaborane framework. In a parallel reaction pathway, nido-1,2-(Cp*Ru)2-5-CO2Me-4,5-C2B2H7, 6, nido-1,2-(Cp*Ru)2-4-B(OH)2-5-CO2Me-4,5-C2B2H6, 16, and nido-1,2-(Cp*Ru)2(mu-H)(mu-BH2)-3-(CH2)2CO2Me-CO2Me-4,5-C2B2H4 (a pair of geometric isomers, 7 and 14, which contain an unusual Ru-B borane bridge) are formed. On heating, 7 rearranges to yield nido-1,2-(Cp*Ru)2-3-(CH2)2CO2Me-4-BH2-5-CO2Me-4,5-C2B2H5, 13, whereas 14 converts to nido-1,2-(Cp*Ru)2-3-(CH2)2CO2Me-4-CO2Me-4,5-C2B2H6, 8. Under thermodynamic control, nido-1,2-(Cp*Ru)2-4,5-B[(CH2)2CO2Me]CO(MeO)[C(CH2)CO2Me]-4,5-C2B2H6, 11, is the major product accompanied by lesser amounts of 6 and 1,2-(Cp*Ru)2-4-OMe-5-Me-4,5-C2B2H6, 10. Compound 11 features a five-membered heterocycle containing a boron atom. The structure of 7, which is an intermediate in the formation of 11, provides the basis for an explanation of this complex condensation of three alkynes. A previously unrecognized role for an exo-cluster bridging borene generated from the metallaborane skeleton by addition of the alkyne is also a feature of this chemistry. Reinsertion or loss of this boron fragment accounts for much of the chemistry observed. NMR experiments reveal labile intermediates, and one has been sufficiently characterized to provide mechanistic insight on the early stages of the alkyne-metallaborane addition reaction. All isolated compounds have been spectroscopically characterized, and most have been structurally characterized in the solid state.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.