Complex orientational ordering of C60 molecules on Au(111)

The orientation and adsorption site for C(60) molecules on Au(111) has been studied using low temperature scanning tunneling microscopy. A complex orientational ordering has been observed for molecules inside the "in-phase" (R0°) domain. A 7-molecule cluster consisting a central molecule sitting atop of a gold atom and 6 tilted surrounding molecules is identified as the structural motif. The 2√3 × 2√3-R30° phase consists of molecules bonding to a gold atomic vacancies with a preferred azimuthal orientation. The quasi-periodic R14° phase is composed of groups of similarly oriented molecules with the groups organized into a 4√3 × 4√3-R30° like super-lattice unit cell.     

Molecular orientation and lattice ordering of C60 molecules on the polar FeO/Pt(111) surface

C(60) molecules assemble into close packing layer under the domination of the intermolecular interaction when deposited onto Pt(111)-supported FeO layer kept at 400 K. From corresponding high resolution scanning tunneling microscopy (STM) image, a kind of C(60) molecular orientational ordering stabilized by the intermolecular interaction is revealed as C(60)/FeO(111)-(√133 × √133) R17.5° structure and determined from the commensurability between the C(60) nearest-neighbor distance and the lattice of the underlying oxygen layer. Moreover, due to the inhomogeneously distributed work function of the underlying FeO layer, the C(60) molecular electronic state is periodically modulated resulting in a bright-dim STM contrast. In addition, one coincidence lattice ordering is determined as 8 × 8 superstructure with respect to the C(60) primitive cell, which overlays a 3 × 3 moiré cell of the underlying FeO layer.     

Structural phases formed by NO(2)∕CO co-adsorption on Au{111} surfaces

Exposing a Au{111} surface to NO(2) and then to CO at temperatures around 120 K in ultra-high vacuum gives rise to molecular overlayers in which the two species are co-adsorbed, which we have investigated using low-temperature scanning tunnelling microscopy. Under NO(2)-rich conditions, a (√7 × √7)R19.1° phase with 3:1 NO(2):CO stoichiometry forms. Under CO-rich conditions, this phase co-exists with other phases having 2:1 and 1:1 NO(2):CO stoichiometries and different symmetries, and with bare Au surface. Structural models for these phases are discussed. Individual domains of the (√7 × √7)R19.1° phase are chiral, by virtue of the arrangement of their achiral components, an observation that may have more general implications.     

Probing the buried C60/Au(111) interface with atoms

To characterize the C(60)/Au(111) interface, we send Au atoms "diving" through the C(60) layer and observe their behavior at the interface. Our observations show that the interfacial diffusion of gold atoms and the nucleation of small Au islands at the interface are strongly dependent on the local C(60)-Au(111) bonding which varies from one domain to another. The contrast-disordered domain consisting of a large fraction of molecules bonded to Au vacancies has a special structure at the interface allowing Au atoms to be inserted beneath the bright-looking molecules while the dim molecules present a much stronger resistance to the diffusing Au atoms. This leads to the formation of isolated Au islands with discrete sizes, with the smallest island just about 1 nm across.     

Dynamic double lattice of 1-adamantaneselenolate self-assembled monolayers on Au{111}

We report a complex, dynamic double lattice for 1-adamantaneselenolate monolayers on Au{111}. Two lattices coexist, revealing two different binding modes for selenols on gold: molecules at bridge sites have lower conductance than molecules at three-fold hollow sites. The monolayer is dynamic, with molecules switching reversibly between the two site-dependent conductance states. Monolayer dynamics enable adsorbed molecules to reorganize according to the underlying gold electronic structure over long distances, which facilitates emergence of the self-organized rows of dimers. The low-conductance molecules assume a (7 × 7) all-bridge configuration, similar to the analogous 1-adamantanethiolate monolayers on Au{111}. The high-conductance molecules self-organize upon mild annealing into distinctive rows of dimers with long-range order, described by a (6√5 × 6√5)R15° unit cell.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

Surface structure and phase transition of K adsorption on Au(111): by ab initio atomistic thermodynamics

We studied the interactions between atomic potassium (K) and Au(111) at a range of coverage (i.e., Θ(K) = 0.11-0.5 monolayer (ML)) by ab initio atomic thermodynamics. For K on-surface adsorption, we found that K energetically favors the three-fold hollow sites (fcc or hcp), while the most significant surface rumpling was obtained at the atop sites. The incorporation of gold atoms in the adsorbate layer gradually becomes energetically favorable with increasing K coverage. We proposed a possible model with a stoichiometry of K(2)Au for the (2 × 2)-0.5 ML phase observed in lower energy electron diffraction (LEED): one K at atop site and the other K as well as one Au adatom at the second-nearest fcc/hcp and hcp/fcc, respectively. Clear theoretical evidences were given for the ionic interaction of K on Au surface. Additionally, phase transitions were predicted based on chemical potential equilibrium of K, largely in line with the earlier reported LEED observations: the clean surface → (√3 × √3)R30° → (2 × 2), and (2 × 2) → (√3 × √3)R30° reversely at an elevated temperature.     

Comparative electrochemical scanning tunneling microscopy study of nonionic fluorosurfactant zonyl FSN self-assembled monolayers on Au(111) and Au(100): a potential-induced structural transition

We investigate the structure of nonionic fluorosurfactant zonyl FSN self-assembled monolayers on Au(111) and Au(100) in 0.05 M H(2)SO(4) as a function of the electrode potential by electrochemical scanning tunneling microscopy (ECSTM). On Au(111), a (3(1/2) × 3(1/2))R30° arrangement of the FSN SAMs is observed, which remains unchanged in the potential range where the redox reaction of FSN molecules does not occur. On Au(100), some parallel corrugations of the FSN SAMs are observed, which originate from the smaller distance and the repulsive interaction between FSN molecules to make the FSN molecules deviate from the bridging sites, and ECSTM reveals a potential-induced structural transition of the FSN SAMs. The experimental observations are rationalized by the effect of the intermolecular interaction. The smaller distance between molecules on Au(100) results in the repulsive force, which increases the probability of structural change induced by external factors (i.e., the electrode potential). The appropriate distance and interactions of FSN molecules account for the stable structure of FSN SAMs on Au(111). Surface crystallography may influence the intermolecular interaction through changing the molecular arrangements of the SAMs. The results benefit the molecular-scale understanding of the behavior of the FSN SAMs under electrochemical potential control.     

Au(111)上Pd电沉积初始阶段ECSTM——PdSO_4溶液研究

应用电化学扫描隧道显微镜(ECSTM)研究了PdSO4溶液中Au(111)电极表面Pd的电化学沉积过程.实验表明,Pd的沉积初始阶段在Au(111)电极表面依次生成两个满单层Pd膜,这一实验结果不仅与电位扫描一致,而且更进一步地证明了起初的两个Pd单层形成过程乃以层～层外延方式生长.高分辨的原子图像表明吸附的SO2-4离子在外延生长的Pd膜表面形成了有序的(3×7)R19°结构.     

Cyano‐Functionalized Triarylamines on Coinage Metal Surfaces: Interplay of Intermolecular and Molecule–Substrate Interactions

The self‐assembly of cyano‐functionalized triarylamine derivatives on Cu(111), Ag(111) and Au(111) was studied by means of scanning tunnelling microscopy, low‐energy electron diffraction, X‐ray photoelectron spectroscopy and density functional theory calculations. Different bonding motifs, such as antiparallel dipolar coupling, hydrogen bonding and metal coordination, were observed. Whereas on Ag(111) only one hexagonally close‐packed pattern stabilized by hydrogen bonding is observed, on Au(111) two different partially porous phases are present at submonolayer coverage, stabilized by dipolar coupling, hydrogen bonding and metal coordination. In contrast to the self‐assembly on Ag(111) and Au(111), for which large islands are formed, on Cu(111), only small patches of hexagonally close‐packed networks stabilized by metal coordination and areas of disordered molecules are found. The significant variety in the molecular self‐assembly of the cyano‐functionalized triarylamine derivatives on these coinage metal surfaces is explained by differences in molecular mobility and the subtle interplay between intermolecular and molecule–substrate interactions.     

Molecular orientations and interfacial structure of C60 on Pt(111)

Molecular orientations and assembled structures of C(60) molecules on Pt(111) have been characterized by low-temperature scanning tunneling microscopy for coverage between 0.1 ML and 1.5 ML. At room temperature, C(60) molecules preferentially decorate the steps and nucleate into single layer islands (SLIs) with hexagonal close-packed structures upon increasing coverage. C(60) islands comprise two differently oriented C(60)∕Pt(111)-(√13?×?√13) R13.9° phases, in which five types of molecular orientation of C(60) carbon cage configurations are clearly identified by the high-resolution scanning tunneling microscopy image. Further annealing treatment leads to more uniform molecular orientation without apparent aggregation of C(60) SLIs. As coverage increases above 1 ML, domains corresponding to (2√3?×?2√3) R30° superstructure appear. To explain the above transformation, an interfacial reconstruction model is proposed according to the detailed study of the molecular adsorption structures in different domains.     

Investigation of the scanning tunneling microscopy image, the stacking pattern, and the bias-voltage-dependent structural instability of 1,10'-phenanthroline molecules adsorbed on Au(111) in terms of electronic structure calculations

A self-assembled monolayer of 1,10'-phenanthroline (phen) molecules on Au(111) was found to undergo a structural phase transition when the bias voltage is switched in scanning tunneling microscopy (STM) experiments (Phys. Rev. Lett. 1995, 75, 2376; Surf. Sci. 1997, 389, 19). The nature of two bright spots representing each phen molecule in the high-resolution STM images of phen molecules on Au(111) was identified by calculating the partial density plots for a monolayer of phen molecules adsorbed on Au(111) with tight-binding electronic structure calculations. The stacking pattern of chains of phen molecules on Au(111) was explained by studying the intermolecular interactions between phen molecules on the basis of first-principles electronic structure calculations for a phen dimer, (phen)(2). The structural instability of phen molecule arrangement caused by the bias-voltage switch was probed by estimating the adsorbate-surface interaction energy with the point-charge approximation for Au(111).     

C60 on SiC nanomesh

A SiC nanomesh is used as a nanotemplate to direct the epitaxy of C60 molecules. The epitaxial growth of C60 molecules on SiC nanomesh at room temperature is investigated by in situ scanning tunneling microscopy, revealing a typical Stranski-Krastanov mode (i.e., for the first one or two monolayers, it is a layer-by-layer growth or 2-D nucleation mode; at higher thicknesses, it changes to island growth or a 3-D nucleation mode). At submonolayer (0.04 and 0.2 ML) coverage, C60 molecules tend to aggregate to form single-layer C60 islands that mainly decorate terrace edges, leaving the uncovered SiC nanomesh almost free of C60 molecules. At 1 ML C60 coverage, a complete wetting layer of hexagonally close-packed C60 molecules forms on top of the SiC nanomesh. At higher coverage from 4.5 ML onward, the C60 stacking adopts a (111) oriented face-centered-cubic (fcc) structure. Strong bright and dim molecular contrasts have been observed on the first layer of C60 molecules, which are proposed to originate from electronic effects in a single-layer C60 island or the different coupling of C60 molecules to SiC nanomesh. These STM molecular contrast patterns completely disappear on the second and all the subsequent C60 layers. It is also found that the nanomesh can be fully recovered by annealing the C60/SiC nanomesh sample at 200 degrees C for 20 min.     

Interactions in different domains of truxenone supramolecular assembly on Au(111)

The two-dimensional assemblies of truxenone, diindeno[1,2-a;1',2'-c]fluorene-5,10,15-trione, on the Au(111) surface have been studied by scanning tunnelling microscopy in ultrahigh vacuum. It is found that the truxenone monolayer on Au(111) exhibits different two-dimensional supramolecular structures. The investigation using scanning tunnelling microscopy combined with the density functional theory calculations can be a helpful approach to understand the complicated supramolecular structures of truxenone self-assembly on Au(111).     

Adsorptive behavior of dimethylglyoxime on Au(111)

Dimethylglyoxime (DMG) adsorbed on Au(111) was investigated using electrochemical scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM experiments revealed three different structures of adsorbed DMG at open circuit potential (~0.07 V versus Ag/AgCl): (2√3×2√3)R30°-α, (2√3×4√3)R30°-β, and (2√3×4√3)R30°-γ. The coverage of adsorbed DMG obtained using XPS was 0.33. A combination of structural and quantitative information identified the adsorbed DMG as an anionic tetramer, held together by intermolecular hydrogen bonding and arrayed in three ordered patterns. Domains of adsorbed DMG underwent phase transitions between the observed structures, most likely due to the influence of the STM tip. However, a significant correlation between the observed structures and the imaging conditions was not found. The ordered layers existed only at open circuit potential as evidenced by their disappearance when the potential was shifted to 0.2 or -0.15 V. The ordered layers were also removed by immersion in a solution of Ni(2+), implying that the adsorbed DMG was converted to a soluble dimer complex with the Ni(2+) ion. This particular observation is discussed in terms of the rigidity of the organic network.     

Highly ordered C60 monolayer self-assembled by using an iodine template on an Au(111) surface in solution

An iodine-modified Au(111) surface, (I/Au(111)), was used as a substrate to prepare a C 60 adlayer by self-organization in a benzene solution. A highly ordered C 60 adlayer was successfully prepared due to the moderate C 60-I/Au(111) interaction. Two lattice structures, (2 square root 3 x 2 square root 3) R30 degrees and p(2 x 2), were imaged for this C 60 adlayer. For the first structure, a featureless ball-like molecular shape was imaged, ascribed to the molecular rotation resulting from a symmetrical location between C 60 and iodine atoms. For the p(2 x 2) structure, the asymmetrical location of C 60 with respect to the iodine atoms freezes the C 60 molecules on the substrate, leading to a clear image of intramolecular structure. The intermediate iodine atoms in the C 60/I/Au(111) adlayer can be desorbed by electrochemically reduction without significantly affecting the ordering of the C 60 adlayer. However, the internal pattern of C 60 disappears in the absence of iodine.     

An in situ STM/AFM and impedance spectroscopy study of the extremely pure 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate/Au(111) interface: potential dependent solvation layers and the herringbone reconstruction

The structure and dynamics of the interfacial layers between the extremely pure air- and water-stable ionic liquid 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate and Au(111) has been investigated using in situ scanning tunneling microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy measurements. The in situ scanning tunnelling microscopy measurements reveal that the Au(111) surface undergoes a reconstruction, and at -1.2 V versus Pt quasi-reference the famous (22 × √3) herringbone superstructure is probed. Atomic force microscopy measurements show that multiple ion pair layers are present at the ionic liquid/Au interface which are dependent on the electrode potential. Upon applying cathodic electrode potentials, stronger ionic liquid near surface structure is detected: both the number of near surface layers and the force required to rupture these layers increases. The electrochemical impedance spectroscopy results reveal that three distinct processes take place at the interface. The fastest process is capacitive in its low-frequency limit and is identified with electrochemical double layer formation. The differential electrochemical double layer capacitance exhibits a local maximum at -0.2 V versus Pt quasi-reference, which is most likely caused by changes in the orientation of cations in the innermost layer. In the potential range between -0.84 V and -1.04 V, a second capacitive process is observed which is slower than electrochemical double layer formation. This process seems to be related to the herringbone reconstruction. In the frequency range below 1 Hz, the onset of an ultraslow faradaic process is found. This process becomes faster when the electrode potential is shifted to more negative potentials.     

金属-有机配合物分子在Au(111)表面的吸附行为

用STM对含氧桥的金属-有机配合物[Cu₂(μ-O)(dptap)4(NO₃)₂]分子在Au(111)表面的吸附行为进行了研究. STM结果表明, 该分子同时存在非解离吸附和解离吸附, 大部分分子在Au(111)面形成有规则的排列, 少量分子发生解离吸附, 并形成(√3×√3)R30°Cu原子吸附结构. 探讨了两种吸附现象共存的起因.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

单原子分散的Au/Cu(111)表面合金的表面结构与吸附性质

Au-Cu双金属合金纳米颗粒对包括CO氧化和CO2还原等在内的多个反应有较好的催化活性,然而关于其表面性质的研究却相当匮乏。在此工作中,我们通过对低覆盖度的Au/Cu(111)和Cu/Au(111)双金属薄膜退火,制备出了单原子级分散的Au/Cu(111)和Cu/Au(111)合金化表面,并利用高分辨扫描隧道显微镜(STM)和扫描隧道谱(STS)进一步研究了掺杂原子的电子性质及其对CO吸附行为的影响。研究发现,分散在Cu(111)表面的表层和次表层Au单原子在STM上表现出不同衬度。在-0.5 e V附近,前者表现出相较于Cu(111)明显增强的电子态密度,而后者则明显减弱。吸附实验表明表层Au单原子对CO的吸附能力并没有得到增强,甚至会减弱其周围Cu原子的吸附能力。与Au在Cu(111)表面较好的分散相反,Cu原子倾向于钻入Au(111)的次表层,并且形成多原子聚集体。且Cu原子受Au(111)衬底吸电子作用的影响,其对CO的吸附能力明显减弱。这个研究结果揭示了合金表面的微观结构与性质的关联,为进一步阐明Au-Cu双金属催化剂的表面反应机理提供参考。