调制式DSC在高聚物研究中的应用

综述了一种新的热分析技术－－调制式差示扫描量热示（Modulated Differentail Scanning Calorimetry）。对其工作原理，优点及在高聚物研究中的应用作了简介。     

调制差示扫描量热法在高分子材料中的应用

调制差示扫描量热法(MDSC)是在传统线性变温基础上叠加一个正弦震荡温度程序,将总热流量分解为可逆热流(热容成分)和不可逆热流(动力学成分),同时具有较高的灵敏度和分辨率,在研究高分子材料复杂相变时具有独特的优势。近年来,MDSC在研究高分子材料的玻璃化转变、结晶-熔融、热容变化等领域得到了较为广泛的应用。本文对MDSC近年来在高分子材料中的最新研究应用做了详细介绍。     

调制式差示扫描量热法在高分子研究中的应用

介绍了调制式差示扫描量热法(MDSC)的工作原理及其作为一种新的热分析手段的优点。并通过一些实例介绍了MDSC法在高分子研究中的应用。     

Modulated Differential Scanning Calorimetry

The reproducibility and reliability of the TA Instruments Modulated Differential Scanning Calorimeter (MDSC) was tested over a range of conditions. The equipment base line was found to be fairly constant with a very small fluctuation (10 W), which means a 0.1 % fluctuation on the scale of a normal polymer MDSC curve. The excellent stability of the base line and the reasonable reproducibility of the curves (5%) suggest that frequent calibration is not required.The heat capacities calculated from the modulated response to the variable temperature depend on the frequency for a given cell constant. The heat capacity cell constant is a unique function of the modulation frequency:k _c =K _c ^o p/(p–6.3) wherep is the time of the periodicity expressed in seconds and K _c ^o is the heat capacity cell constant measured on a standard material and reduced to zero frequency. The cell constants depend on the flow rate of the helium according to:K(He)=K ^o(1.298–0.004424He+1.438·10^–5 He ²) whereHe is the flow rate of helium in ml min^–1 andK ^o represents a constant at 100 cm³ min^–1. There is a strong dependence of cell constant on the flow rate ranges from 10 to 80 cm³ min^–1, while above this rate (up to 135 ml min^–1) the cell constant approaches a plateau.     

Characterization of Reacting Polymer Systems by Temperature-Modulated Differential Scanning Calorimetry

The benefits of temperature-modulated differential scanning calorimetry to characterize reacting polymers are illustrated for different experimental systems. The effects of combined isothermal and non-isothermal cure paths on (de)vitrification, mobility-restricted reactions, and relaxation during vitrification are discussed for anhydride- and amine-cured epoxies. The simultaneous measurement of heat capacity, heat flow, and heat flow phase provides an excellent tool for mechanistic interpretations. The influence of the metakaolinite particle size on the production of inorganic silicate-metakaolinite polymer glasses is treated as an example. These principles are further illustrated for primary and secondary amine-epoxy step growth reactions, and for styrene-cured unsaturated polyester chain growth reactions with ‘gel effect’. Finally, the effects of isothermal cure and temperature on reaction-induced phase separation in a polyethersulfone modified epoxy-amine system are highlighted. This revised version was published online in July 2006 with corrections to the Cover Date.     

A mathematical model for Modulated Differential Scanning Calorimetry

Reading and co-workers introduced a new technique a few years ago called Modulated Differential Scanning Calorimetry or MDSC. Here the first part of a theoretical analysis for this technique is given. A simple mathematical model for modulated differential scanning calorimetry in the form of an ordinary differential equation is derived. The model is analysed to find the effect of a kinetic event in the form of a chemical reaction. Some possible sources of error are discussed. A more sophisticated version of the model allowing for spatial variation in a calorimeter is developed and it is seen how it can be reduced to the earlier model. Some preliminary work on a phase change is also presented.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday     

Modulated Differential Scanning Calorimetry Observation of Physical Ageing in Polymers

Modulated-temperature differential scanning calorimetry (M-TDSC) is becoming a useful tool in the characterisation of thermal behaviour of polymers. In this paper, we discuss whether the non-reversing M-TDSC signal can be used, quantitatively and directly, to study the process of physical ageing in polymers. Difference exists between the values of relaxation enthalpy determined by using average heat capacity, <C _p>, signal as for conventional DSC and non-reversing heat capacity, C ⁿ _p, signal. When the signal of reversing heat capacity of unaged sample is considered as baseline for <C _p> and C ⁿ _p signals, the difference disappears. It is concluded that non-reversing M-TDSC signal can be used to observe the process of physical ageing semi-qualitatively and directly. With increasing annealing time, the peak of the imaginary part, C″_p, of the complex heat capacity becomes narrow, but peak area changes little. This indicated that C″_p is not correlated with relaxation enthalpy. It may be related to entropy change during the modulation. However, the entropy change is quite small. This revised version was published online in August 2006 with corrections to the Cover Date.     

聚乳酸-聚乙二醇单甲醚共混体系的调制DSC分析

采用调制差示扫描量热法(MDSC)研究了聚乳酸(PLA)与聚乙二醇单甲醚(MPEG)共混体系的热性能。研究结果表明,MDSC可有效分辨PLA重结晶和熔融的重叠效应,在测试条件下,PLA的α’-α晶型转变与α晶体的熔融几乎同时进行。随着升温速率的加快和调制周期的延长,当增塑剂的质量分数为15%时,PLA-MPEG共混物分割在不可逆曲线的重结晶焓逐渐升高(最高约28J/g),熔融焓逐渐降低(最低约为3.3J/g);分割在可逆曲线的熔融峰逐渐由多重峰变为单峰,且焓变值逐渐升高(最高约66.1J/g),相应的可逆曲线熔融分割比例达到了95.2%。通过提高升温速率和延长调制周期,可使大部分熔融分割在可逆曲线上,但过快的升温速率和过长的调制周期会导致PLA相转变时的周期数过少,DSC调制功能的分辨率下降,设置测试条件时需综合考虑。     

聚苯乙烯/聚丙烯酸丁酯乳胶互穿聚合物网络的动态力学性能研究

<正> 互穿聚合物网络(IPN)是一种新型聚合物共混物.自Sperling在1969年合成聚丙烯酸乙酯/聚苯乙烯异步IPN(Sequential IPN)后,该领域进展很快.乳胶IPN(latex IPN)是用改进的乳液聚合法合成的一种微观互穿IPN.在前文中,我们报道了聚苯乙烯/聚丙烯酸丁酯(PS/PBA)乳胶IPN的合成,本文研究一些因素对PS/PBA乳胶IPN动态力学性能的影响.     

示差扫描量热法进展及其在高分子表征中的应用

示差扫描量热法(DSC)是表征材料热性能和热反应的一种高效研究工具,具有操作简便、应用广泛、测量值物理意义明确等优点.近年来DSC技术的发展大大拓展了高分子材料表征的测试范围,促进了对高分子物理转变的热力学和动力学的深入研究.温度调制示差扫描量热法(TMDSC)是DSC在20世纪90年代的标志性进展,它在传统DSC的线性升温速率的基础之上引入了调制速率,从而可将总热流信号分解为可逆信号和不可逆信号两部分,并能测量准等温过程的可逆热容.闪速示差扫描量热法(FSC)是DSC技术近年来的创新性发展,它采用体积微小的氮化硅薄膜芯片传感器替代传统DSC的坩埚作为试样容器和控温系统,实现了超快速的升降温扫描速率以及微米尺度上的样品测试,使得对于高分子在扫描过程中的结构重组机制的分析以及对实际的生产加工条件的直接模拟成为可能.本文从热分析基础出发,依次对传统DSC、TMDSC和FSC进行了介绍,内容覆盖其发展历史、方法原理、操作技巧及其在高分子表征中的应用举例,最后对DSC未来的发展和应用进行了展望.本文希望通过综述DSC原理、实验技巧和应用进展,帮助读者加深对DSC这一常用表征技术的理解,进一步拓展DSC表征高分子材料的应用.     

Model Theory of Visco-Elastic Properties and Relaxation Spectra of Two Different Interpenetrating Polymer Networks

Dynamic viscoelastic models of the system of two different interpenetrating polymer networks with different topology and type of interactions were used for calculating spectra of relaxation times of the system under consideration. It was shown, that two branches of the relaxation spectrum appear for two models of interpenetrating networks with different components. One of the branches is the branch of the collective motion of double network consisting of two initial interacting networks. Parameters of this branch of relaxation spectrum are defined by both own elastic constants of each of interacting networks and by effective quasi-elastic interactions between two networks. This branch is the low frequency one and is described by broad relaxation time spectrum. The second branch is the high frequency one and characterizes mutual local motions of two interacting networks. The relaxation spectrum of this branch is comparatively narrow and depends on the quasi-elastic constants and mutual friction which is defined by the entanglements of the networks and by its effective rigidity. The second branch does not contain extremely large relaxation times for infinitely large networks.     

Mesoporous Polymeric Materials Tailored from Oligoester-Derivatized Interpenetrating Polymer Networks

The utilization of semi-hydrolyzable oligoester-derivatized Interpenetrating Polymer Networks (IPNs) as nanostructured precursors provides a straightforward and effective route to novel (meso)porous networks. In a first stage, different types of poly(D,L-lactide)/poly(methyl methacrylate)-based IPNs were synthesized by resorting to the so-called in situ sequential method. In a second stage, the quantitative hydrolysis of the polyester sub-network afforded porous structures with pore sizes ranging from 10 to 100 nm. The potentialities offered by this versatile approach were discussed, and the porosity of the resulting methacrylic networks was examined by Scanning Electron Microscopy (SEM) and thermoporometry using Differential Scanning Calorimetry (DSC).     

用调制式差示扫描量热法表征尼龙6和聚乳酸升温热行为

用调制式差示扫描量热法(MDSC)表征尼龙6和聚乳酸升温过程热行为，MDSC把总热流分解成可逆热流ΔHrev和不可逆热流ΔHnon;实验结果表明纯尼龙及其共混体系升温熔融过程中包含了可逆放热峰；共混体系不同，可逆热流ΔHrev不同，都比纯尼龙小；纯尼龙可逆热流ΔHrev随调制周期延长而增大；聚乳酸玻璃化转变区，随老化时间的延长和老化温度的提高，玻璃化转变温度Tg提高，松弛热焓增大。     

Temperature-Modulated Differential Scanning Calorimetry through Heat Diffusion Analysis

In the present study, a complete model of thermal diffusion in a TMDSC specimen is presented. The governing equation takes into account thermal conductivity and does not neglect temperature gradients. This model is solved analytically for a specimen of cylindrical geometry with two surfaces following the block temperature and considering the third surface insulated. The full analytical solution consists of a transient and an asymptotic expression. The asymptotic expression is divided into an underlying and a cyclic part to allow comparison with existing models. The present model finds that the phase angle between the temperatures of sample and block are dependent upon the sample material, which has not been predicted by existing models. Moreover, the present model does not require the use of an experimentally determined constant as long as the cell is ideal. It was found that the phase lag between sample and block temperatures could be described by two effective thermal diffusivities, Λ′ and Λ″, instead of complex heat capacities and . These heat capacity parameters were viewed as mathematical artifacts arising from the use of an over-simplified governing equation that does not take into account thermal conductivity and thermal gradients within the specimen. This revised version was published online in July 2006 with corrections to the Cover Date.     

Physical Aging of Maltose Glasses as Measured by Standard and Modulated Differential Scanning Calorimetry

The physical aging characteristics of maltose glasses aged at two temperatures below the glass transition temperature, T_g, (T_g-10°C and T_g-20°C) from 5 to 10 000 min were measured by standard differential scanning calorimetry (SDSC) and modulated differential scanning calorimetry (MDSC). The experimentally measured instrumental T_g, the calculated T_g, and the excess enthalpy values were obtained for aged glasses using both DSC methods. The development of excess enthalpy as a function of aging time, as measured by both SDSC and MDSC, was fit using the Cowie and Ferguson and Tool-Narayanswamy-Moynihan models. The change in the T_g values and the development of the excess enthalpy resulting from physical aging measured by the two DSC methods are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

P(VA-co-DBM)/PVA乳胶IPN阻尼材料的合成及动态力学性能

用种子乳液聚合法合成了聚（醋酸乙烯酯－co-马来酸二丁酯）／聚醋酸乙烯酯乳胶互穿聚合物网络阻尼材料,动态力学谱结果表明,该阻尼材料在较宽的温域具有很高的阻尼因子。     

Investigations of the Sub-Ambient Transitions in Frozen Sucrose by Modulated Differential Scanning Calorimetry (MDSC®)

40% w/w sucrose/water solutions were analyzed by Modulated Differential Scanning Calorimetry [1] in the sub-ambient temperature region. At these temperatures, the solutions exhibit a complex, two-step thermal event. The lower-temperature event is believed to be the glass transition of the amorphous sucrose phase. The nature of the higher-temperature event is the subject of controversy. This event has been shown to have distinct second-order characteristics, and as such is believed to be a second T_g. Others feel that this event is the onset of melting. The temperature region between these events contains a devitrification exotherm. Through the use of MDSC, both in scanning and stepwise quasi-isothermal modes, improved sensitivity and resolution of MDSC provides new insight into the nature of these transitions.This revised version was published online in November 2005 with corrections to the Cover Date.     

聚氨酯互穿聚合物网络阻尼性能研究进展

介绍了聚氨酯互穿聚合物网络（ＰＵ ＩＰＮ）作为阻尼材料的研究进展,分别讨论了聚氨酯（ＰＵ）／环氧树脂（ＥＰ）ＩＰＮ和ＰＵ／乙烯基聚合物ＩＰＮ的阻尼性,以及影响阻尼性能的因素,并比较了不同类型的ＰＵ ＩＰＮ的优缺点及新的可能的探讨方向。     

Effect of Some Solvents on the Radical Polymerization of Methyl Methacrylate Studied by Differential Scanning Calorimetry

The course of the isothermal polymerization of methyl methacrylate in different concentrated solutions in toluene, n-butyl acetate, cyclohexanone, and dimethylformamide was measured at four temperatures by differential scanning calorimetry. The conversions at the sharp increase of the reaction rate were found to increase with dilution of the reaction mixture. The polymerization enthalpies and the composite rate constants were calculated. The polymerization enthalpies seem to be solvent independent. The composite rate constants for polymerization in butyl acetate are lower and those for polymerization in toluene are equal to the constants for bulk polymerization. They are independent of the concentration of the reaction system. The constants for polymerization in cyclohexanone and dimethylformamide are, however, concentration dependent. An interrelation between the composite rate constants and solubility parameters of the solvents and methyl methacrylate was found. The relative molecular weight averages decrease with decreasing concentration of the reaction mixture. The MW distributions were very broad.     

Differential Scanning Calorimetry of Native Silk Feedstock

Native silk proteins, extracted directly from the silk gland prior to spinning, offer access to a naturally hydrated protein that has undergone little to no processing. Combined with differential scanning calorimetry (DSC), it is possible to probe the thermal stability and hydration status of silk and thus investigate its denaturation and solidification, echoing that of the natural spinning process. It is found that native silk is stable between ?10 °C and 55 °C, and both the high‐temperature enthalpy of denaturation (measured via modulated temperature DSC) and a newly reported low‐temperature ice‐melting transition may serve as useful quality indicators in the future for artificial silks. Finally, compared to albumin, silk's denaturation enthalpy is much lower than expected, which is interpreted within a recently proposed entropic desolvation framework which can serve to unveil the low‐energy aquamelt processing pathway.