硫代磷酸二乙酯类农药半抗原设计及抗体识别特性

通过分析硫代磷酸二乙酯类农药的结构特点, 设计并合成了系列半抗原; 采用活泼酯法将半抗原分别与牛血清蛋白(BSA)和卵清蛋白(OVA)偶联制备了系列免疫原和包被原; 通过免疫新西兰大白兔获得了相应抗硫代磷酸二乙酯类农药的类特异性抗体. 建立检测硫代磷酸二乙酯类农药的间接竞争酶联免疫分析(ELISA)方法, 分析探讨了免疫半抗原结构对抗体特性的影响, 并阐述了包被半抗原结构对ELISA灵敏度的影响规律. 结果表明, 手臂取代位置在苯环对位且手臂较短的免疫原具有较好的免疫效果, 同时异源包被可以显著提高ELISA方法的灵敏度. 由抗体PAb-H1和包被原H6-OVA建立的间接竞争ELISA方法可以同时检测7个广泛使用的有机磷农药, 其半抑制浓度(IC50)分别为蝇毒磷(0.013 mg/L)、对硫磷(0.348 mg/L)、喹硫磷(0.022 mg/L)、三唑磷(0.035 mg/L)、甲拌磷(0.751 mg/L)、除线磷(0.850 mg/L)及辛硫磷(1.301 mg/L), 最低检测限符合国内外相关有机磷药物最大允许残留限量标准(MRLS)的检测要求.     

基于分子模拟的脱氧雪腐镰刀菌烯醇半抗原分子设计及免疫效果研究

运用分子模拟软件Hyperchem 7.5,对脱氧雪腐镰刀菌烯醇(DON)及其6种不同连接臂修饰后的DON衍生物的分子构型进行量化计算,通过对其结构参数以及分子轨道的计算比较,获得高特异性、高生物活性的DON半抗原结构,避免了半抗原设计方面的盲目性。同时合成了其中的3种半抗原,通过碳二亚胺(EDC)法与BSA进行偶联免疫Bal b/c小鼠,制备多抗血清,采用间接酶联免疫吸附法(ELISA)和间接竞争ELISA法进行抗体效果的比较。结果表明,分子模拟计算结果与免疫实验的结果相一致,分子模拟对半抗原结构设计具有指导性意义。     

Disulfide symmetric dimers as stable pre-hapten forms for bioconjugation: a strategy to prepare immunoreagents for the detection of sulfophenyl carboxylate residues in environmental samples

A convenient, generic synthesis of bioconjugates from haptens with a thiol group has been established. The corresponding haptens are synthesized as stable symmetric dimmers through a disulfide bond that is reduced immediately before conjugation with the aid of a di(n-butyl)phenylphosphine polystyrene (DBPP) resin. This strategy was used to prepare haptenized biomolecules and to raise antibodies against short-alkyl-chain sulfophenyl carboxylates (X-C(z)-SPCs; X is the position of the benzylic group and z is the alkyl-chain length) formed after degradation of the widely used domestic and industrial linear alkylbenzene sulfonates (LASs) surfactants. Because of the complexity of the LASs technical mixture, homologous and pseudo-heterologous immunization strategies have been studied with the aim of broadening antibody recognition of the SPC family. With this purpose, two types of immunizing haptens have been synthesized and used to prepare bioconjugates and raise antibodies. Type-A bioconjugates (SPC(A)-protein) were prepared by synthesizing type-A haptens as stable symmetric dimers, generically 2,2'-dithiobis[5-{4-(N-ethylsulfamoyl)}phenylalkanoic acids] (X-C(z)-S-SPC). On the other hand, type-B bioconjugates (SPC(B)-protein) were prepared by treating the carboxylic groups of the corresponding 4-sulfophenylalkanoic acids (X-C(z)-SPC) with the amino groups of the lysine residues by using classical carbodiimide procedures. Type-A haptens produced antibodies with a much higher avidity for the target analyte. Under competitive immunochemical configurations (As112/2-C(5)-ovalbumin), these antibodies can reach a limit of detection (LOD) of 40 ng L(-1) with an IC(50) value of 200 ng L(-1) for 3-C(6)-SPC, which opens up the possibility of trace contamination of edible waters by surfactants with 3-C(6)-SPC as a marker of LAS pollution. A comparative study of the properties of the three families of polyclonal antibodies produced revealed that antibodies raised through pseudo-heterologous immunization strategies produced antibodies with a broader specificity versus the SPC family. These results indicate that this approach could be useful in avoiding synthetic difficulties associated with preparing haptens that preserve all the most important chemical functionalities of the molecule.     

Enantioselective sequential-injection chemiluminescence immunoassays for 3,3′,5-triiodothyronine (T3) and thyroxine (T4)

This study deals with the development of enantioselective flow-through immunosensors for triiodothyronine (T₃) and tetraiodothyronine (thyroxine, T₄) on the basis of a competitive assay using enantioselective antibodies. The instrumental set-up is based on a simple sequential-injection system equipped with a chemiluminescence detector and an immunoreactor, which consists of a flow-cell packed with immobilized haptens. As haptens, 4-amino-l-phenylalanine (4-amino-l-Phe), 4-amino-d-Phe or l-T₃ were used. Antibodies directed against 4-amino-l- or d-Phe or l-T₃ were labeled with an acridinium ester. Three different approaches for immobilizing the haptens were investigated including simple adsorption on polystyrene, chemical binding to an activated methacrylate polymer and binding via the biotin-streptavidin binding (BSB) system. The latter approach showed the best results regarding repeatability and sensivity. Using biotinylated l-T₃ immobilized onto a streptavidin-derivatized trisacryl support and labeled anti-l-T₃ antibodies, a detection limit of 15.5 fmol/ml for l-T₃ was obtained. One assay cycle including regeneration takes only about 5 min. This approach was applied to detect l-T₃ in plasma samples without any sample pre-treatment. The average recovery from spiked plasma sample was about 93% with a R.S.D. below 5%.     

Production of antibodies from chicken egg yolk to phenyl- N -methylcarbamate insecticides for analytical purposes

With the aim of developing polyclonal antibodies binding as many phenyl-N-methylcarbamate insecticides (PNMCs) as possible, IgY antibodies were produced in laying hens. Two haptens (3-(2,6-dimethyl-4-(methylcarbamoyl)phenylaminocarbonyl)propanoic acid and 4-((2,6-dimethyl-4-(methylcarbamoyl)phenylaminocarbonyl)-3,3-dimethyl)butanoic acid) were synthesized preserving the major structural features of PNMCs, by a novel synthetic pathway. These haptens differed only in the spacer arm incorporated. Immunizing antigen and coating antigen were prepared by coupling the first hapten with bovine serum albumin and the second with thyroglobulin, from porcine thyroid glands, respectively. The titre and maturation increase in the developed antibodies, in the egg yolk, were assessed by non-competitive ELISA. Avidity and cross-reactivity of the antibodies with selected pesticides were estimated by means of competitive ELISA. The produced IgYs exhibited a high binding capacity to carbaryl, trimethacarb, metolcarb, aminocarb, and promecarb. These antibodies can be used for immunosorbent preparation for analytical purposes.     

Synthesis of haptens of organophosphorus pesticides and development of enzyme-linked immunosorbent assays for parathion-methyl

A simple synthetic method for haptens of organophosphorus (OP) pesticides with a spacer arm (aminocarboxylic acid) attached at the pesticide thiophosphate group was developed. While the previous synthetic approach for this type of haptens requires seven steps, the present method involves only two steps. Using this method, four haptens of the OP insecticide parathion-methyl were synthesized. Rabbits were immunized with either one of the two haptens coupled to bovine serum albumin for production of polyclonal antibodies. Using the serum with the highest specificity, an antigen-coated ELISA was developed, which showed an IC₅₀ of 6.4 ng/ml with a detection limit of 0.2 ng/ml. An antibody-coated ELISA using an enzyme tracer was also developed, which showed an IC₅₀ of 3.5 ng/ml with a detection limit of 0.3 ng/ml. The antibodies showed negligible cross-reactivity with other OP pesticides tested except with the insecticides parathion and paraoxon only in the antigen-coated ELISA.     

Hapten synthesis and antibody production for the development of a melamine immunoassay

The incorporation of melamine into food products is banned but its misuse has been widely reported in both animal feeds and food. The development of a rapid screening immunoassay for monitoring of the substance is an urgent requirement. Two haptens of melamine were synthesized by introducing spacer arms of different lengths and structures on the triazine ring of the analyte molecular structure. 6-Aminocaproic acid and 3-mercaptopropionic acid were reacted with 2-chloro-4,6-diamino-1,3,5-triazine (CAAT) to produce hapten 1 [3-(4,6-diamino-1,6-dihydro-1,3,5-triazin-2-ylamino) hexanoic acid] and hapten 2 [3-(4,6-diamino-1,6-dihydro-1,3,5-triazin-2-ylthio) propanoic acid], respectively. The molecular structures of the two haptens were identified by ¹H nuclear magnetic resonance spectrometry, mass spectrometry and infrared spectrometry. An immunogen was prepared by coupling hapten 1 to bovine serum albumin (BSA). Two plate coating antigens were prepared by coupling both haptens to egg ovalbumin (OVA). A competitive indirect enzyme-linked immunosorbent assay (ciELISA) was developed to evaluate homogeneous and heterogeneous assay formats. The results showed that polyclonal antibodies with high titers were obtained, and the heterogeneous immunoassay format demonstrated a better performance with an IC₅₀ of 70.6 ng mL⁻¹, a LOD of 2.6 ng mL⁻¹ and a LOQ of 7.6 ng mL⁻¹. Except for cyromazine, no obvious cross-reactivity to common compounds was found. The data showed that the hapten synthesis was successful and the resultant antisera could be used in an immunoassay for the rapid and sensitive detection of this banned chemical.     

Selection of phage antibodies with GPX activity by combination of phage displayed antibody library with chemical modification and their characterization using a surface plasmon resonance biosensor

Glutathione peroxidase (GPX) is an important antioxidant enzyme, which plays an important role in scavenging reactive oxygen species. To obtain humanized GPX catalytic antibodies, the phage displayed human antibody library on the surface of the filamentous bacteriophage was used to select novel antibodies by repetitive screening. Phage antibodies B8, H6 and C1 with the GSH-binding site were obtained from the library by enzyme-linked immunosorbent assay (ELISA) analysis with four rounds of selection against three haptens, S-2,4-dinitrophenyl t-butyl ester [GSH-S-DNP-Bu (B)], S-2,4-dinitrophenyl t-hexyl ester [GSH-S-DNP-He (H)] and S-2,4-dinitrophenyl cycle-hexyl ester [GSH-S-DNP-cHe (C)], and characterized using surface plasmon resonance (SPR) biosensor. The gold layer was modified by dithiodiglycolic acid (DDA) and three haptens were easily attached to DDA by self-assembling to form a biosensor membrane. The membrane bounds specifically corresponding antibodies. The kinetic process of the reaction between phage antibodies and their haptens was studied by SPR biosensor. In order to improve selectivity, chemical modification was used to incorporate directly catalytic group selenocysteine (Sec) into selected phage clone B8, H6 and C1 to form Se-B8, Se-H6 and Se-C1, respectively. The GPX activities of Se-B8, Se-H6 and Se-C1 were found to be 3000, 2000 and 700 units/μmol, respectively. Compared with conventional ELISA analysis, the proposed method based on SPR biosensor is much more rapid and simpler.     

催化抗体

利用特异性的抗原产生的单克隆抗体具有催化很多有机化学反应的性质。特异性抗原可用适当的化学模型物与载体蛋白连接而成。设计化学模型物可考虑:(1)反应过渡态的稳定性;(2)反应基团的接近效应;(3)引入催化基团。     

Synthesis of haptens of organophosphorus pesticides and development of immunoassays for fenitrothion

A simple synthetic method for haptens of organophosphorus (OP) pesticides with a spacer arm (aminocarboxylic acid) attached at the pesticide thiophosphate group was developed. While the previous synthetic approach for this type of haptens requires seven steps, the present method involves only two steps. Using this method, five haptens of fenitrothion were synthesized and two of them were conjugated to proteins to be used as immunogens for production of polyclonal antibodies. Using the antibodies and a coating antigen, an indirect competitive enzyme-linked immunosorbent assay (ELISA) for fenitrothion was developed, which showed an IC₅₀ of 3.7 ng/mL with a detection limit of 0.5 ng/mL. A direct competitive ELISA using an enzyme tracer was also developed, which showed an IC₅₀ of 5.6 ng/mL with a detection limit of 0.4 ng/mL. The antibodies in both assays showed negligible cross-reactivity with other OP pesticides except with the insecticide parathion-methyl only in the direct ELISA. Recoveries of fenitrothion from fortified lettuce and rice samples ranged 84-116 and 100-121%, respectively.     

Studies on the heterogeneity of anti-hapten antibodies by means of two-dimensional affinity electrophoresis

The molecular heterogeneity of rabbit anti-hapten antibodies has been investigated by two-dimensional affinity electrophoresis (2D-AEP). Anti-dansyl and anti-arsanilic diazo-antibodies were separated into several hundred IgG spots as in the case of anti-DNP antibodies. They were grouped into a number of monoclonal IgG families. At the beginning of immunization, IgG spots having low pI and low affinity were predominant but one or two weeks after immunization the IgG spots with high affinity and high pI increased. After the second or third immunization, the 2D-AEP patterns became stable and constant. Anti-arsanilic diazo and anti-DNP antibodies exhibited only weak cross-reactivity with other aromatic haptens. In contrast, anti-dansyl antibodies cross-reacted to a considerable degree with DNP-hapten. A few anti-dansyl IgG families which have cross-reactivity with DNP-hapten were separated. Their apparent dissociation constants to the haptens and their affinity ratios were calculated from their 2D-AEP patterns, according to the affinity theory.     

Selection of hapten structures for indirect immunosensor arrays

A multianalyte immunosensor array can be implemented by immobilization of different haptens in distinct areas of a single cavity or flow cell. In this case a mixture of different antibodies for different analytes is used in an indirect ELISA-format. The selection of the right hapten structures is very important to build up an array successfully. A system of independent hapten/antibody combinations is needed, with one immobilized hapten (coating antigen) reacting only with one antibody. If more than one antibody binds to a coating antigen no ideal calibration curves are obtained. This phenomenon is known as shared-reactivity and can lead to double-sigmoidal curves. To use monoclonal antibodies to 2,4,6-trinitrotoluene (TNT) and 2,4-dichlorophenoxyacetic acid (2,4-D), two different haptens had to be found, one only reacting with the TNT-antibody, the other only binding to the 2,4-D-antibody. 2,4-Dichlorophenoxybutyric acid was used for the 2,4-D antibody and 2,4,6-trinitrophenyl-8-aminooctanoic acid for the TNT antibody. Although 4-nitrotoluene, 2,4-dinitrotoluene and 4-amino-2,6-dinitrotoluene showed only very low cross-reactivities to the 2,4-D antibody the corresponding haptens 4-nitrophenylacetic acid, 2,4-dinitrophenyl-6-aminohexanonic acid, and 4-amino-2,6-dinitrotoluyl-(N)-glutarate are useful coating antigens for this antibody. The structure of the coating antigens had no significant influence on the midpoints (IC50) of the test for 2,4-D and even haptens with very low cross-reactivities could be used. With all haptens a test midpoint of about 0.2 μg/L for 2,4-D was achieved. For the direct assay format with immobilized antibodies the same test midpoint of 0.2 μg/L for 2,4-D was obtained. As a conclusion, the selectivity of a monoclonal antibody should not be influenced by the used tracer or coating antigen as well. It could be shown that the affinity constants of an antibody to the analytes are the main sensitivity and selectivity determining parameters for competitive immunoassays. A two-dimensional microtiter plate array was used to determine the analytes 2,4-D and TNT in parallel with a mixture of antibodies. Received: 29 July 1998 / Revised: 21 October 1998 / Accepted: 10 November 1998     

二甲氧基硫代磷酸酯类农药多残留免疫分析方法研究

以二甲氧基硫代磷酸酯类农药为目标,设计合成了系列半抗原及抗原,制备了4种宽谱特异性抗体。研究结果表明,含不饱和烷烃手臂的半抗原所制备的抗体宽谱特异性优于含酰胺键手臂的半抗原所制备的抗体。采用目标待测物的特征次级结构作为包被半抗原可显著提高ELISA检测灵敏度。经条件优化建立的最佳间接竞争ELISA多残留检测方法可同时检测8种常用高毒农药,其检出限(LOD)在2.6～104μg/kg之间,符合相关限量标准要求。生菜样品药物添加平均回收率为73.9%～121.4%;平均相对标准偏差为10.6%～18.4%。菜心样品药物添加平均回收率为80.4%～121.2%;平均相对标准偏差为13.5%～24.4%。方法精密度均达到气相色谱法的检测水平。     

Design,Synthesis, and In Vivo Evaluation of C1-Linked 4,5-Epoxymorphinan Haptens for Heroin Vaccines

In our continuing effort to develop effective anti-heroin vaccines as potential medications for the treatment of opioid use disorder, herein we present the design and synthesis of the haptens: 1-AmidoMorHap (1), 1-AmidoMorHap epimer (2), 1 Amido-DihydroMorHap (3), and 1 Amido-DihydroMorHap epimer (4). This is the first report of hydrolytically stable haptenic surrogates of heroin with the attachment site at the C1 position in the 4,5-epoxymorophinan nucleus. We prepared respective tetanus toxoid (TT)–hapten conjugates as heroin vaccine immunogens and evaluated their efficacy in vivo. We showed that all TT–hapten conjugates induced high antibody endpoint titers against the targets but only haptens 2 and 3 can induce protective effects against heroin in vivo. The epimeric analogues of these haptens, 1 and 4, failed to protect mice from the effects of heroin. We also showed that the in vivo efficacy is consistent with the results of the in vitro drug sequestration assay. Attachment of the linker at the C1 position induced antibodies with weak binding to the target drugs. Only TT-2 and TT-3 yielded antibodies that bound heroin and 6-acetyl morphine. None of the TT–hapten conjugates induced antibodies that cross-reacted with morphine, methadone, naloxone, or naltrexone, and only TT-3 interacted weakly with buprenorphine, and that subtle structural difference, especially at the C6 position, can vastly alter the specificity of the induced antibodies. This study is an important contribution in the field of vaccine development against small-molecule targets, providing proof that the chirality at C6 in these epoxymorphinans is a vital key to their effectiveness.     

Conformational changes of hapten-protein conjugates resulting in improved broad-specificity and sensitivity of an ELISA for organophosphorus pesticides

The type of hapten linkage to a carrier protein can play an important role in determining the nature of the resulting antibody response. Generic haptens using three types of linkers were synthesized (a monocarboxylic acid, an unsaturated hydrocarbon and a carboxamido spacer). These haptens were conjugated to bovine serum albumin (BSA) and used as immunogens to produce broad-specificity monoclonal antibodies (MAbs) to organophosphorus pesticides (OPs). Three-dimensional (3D) structures of hapten-lysine conjugates were optimized using molecular modeling (MM) to mimic conformations of hapten-BSA conjugates. The results from MM studies revealed a change of the 3D conformation and electrostatic potential of hapten 1 when the monocarboxylic acid linker was coupled to lysine. This result was consistent with the observed high-cross-reactivity of the corresponding MAb-H1 for the OPs. The competitive indirect enzyme-linked immunosorbent assay based on MAb-H1 is ideally suited to be used as a screening method for OP contaminants.     

Synthesis of novel hapten derivatives of 1alpha,25-dihydroxy-vitamin D3 and its 20-epi analogue

Hapten derivatives of 1alpha,25-dihydroxyvitamin D(3) and its 20-epimer were synthesized and conjugated to a carrier protein for raising polyclonal antibodies. The haptens were linked through spacers at C-16, thereby exposing both the A-ring and the side chain of the molecules, to maximize antibody specificity. The spacers were introduced via stereoselective hydroboration of 16-ene intermediates as the key step. In immunoassays, the antibodies raised toward the natural hormone were selective to this compound over derivatives with modifications in the A-ring or the side chain. The antibodies toward the 20-epimer, however, were unable to recognize modifications in the side chain.     

Antibody engineering toward high-sensitivity high-throughput immunosensing of small molecules

Clinical and environmental analyses often require immunochemical detection and quantification of small molecules (haptens) that are available as biomarkers. However, the affinity ceilings of conventional anti-hapten antibodies, which are produced by immunizing animals, prevent subfemtomole-range determinations with competitive immunoassay formats. "Sandwich-type" noncompetitive (immunometric) assays allow for sensitive determinations of macromolecules (subattomole-range) and the direct relationship between analyte amount and signal intensity provides higher accessibility to modern high-throughput sensing systems. Unfortunately, sandwich-type assays require that analytes have at least two epitopes, and thus are not applicable to haptens. Antibody engineering, i.e., genetic manipulation of antibody molecules, could provide artificially improved reagents that enable us to overcome these limitations. In this review, we summarize recent successful developments and applications of engineered antibodies for sensitive and high-throughput hapten sensing.     

Determination of sulfonamides in swine meat by immunoaffinity chromatography

A procedure was developed for the preparation of anti-sulfonamide (SA) group-specific antibodies and immunosorbents. Sulfonamide haptens and conjugates were synthesized by building spacer arms on an N1 group of 4-aminobenzensulfonamide. The anti-SA group-specific antibodies and immunosorbents were prepared successfully. After extraction with methanol-water (8 + 2), sulfamonomethoxine, sulfadimethoxine, and sulfaquinoxaline were cleaned up on immunoaffinity columns and determined by reversed-phase liquid chromatography with UV detection at 270 nm. The recoveries from fortified swine meat (10-100 microg/kg) ranged from 70.8 to 94.1%, with coefficients of variation of 3.4-12.9%. Limits of detection were 1-2 microg/kg.     

Concise and modular synthesis of regioisomeric haptens for the production of high-affinity and stereoselective antibodies to the strobilurin azoxystrobin

The immune response to regioisomeric haptens of azoxystrobin with varied derivatization sites was studied. Based on the Sonogashira and Suzuki-Miyaura couplings and following a straightforward modular design, we have synthesized four haptens with the same linker anchored through C-C bonds and located at different sites of the molecule. The most stereoselective antibodies were produced from immunogens with the spacer arm at a distal position from the β-methoxyacrylate moiety characteristic of strobilurins. Moreover, we observed that assay cross-reactivity was reliant on the functionalization site of the competitor derivative. Finally, the antibody binding site was explored using synthetic chemical analogues.     

Monoclonal antibodies with group specificity toward sulfonamides: selection of hapten and antibody selectivity

Immunoassays based on the current available antibodies for large multi-sulfonamide screening programs have suffered from high selectivity for individual sulfonamides and a wide range of selectivities for different sulfonamides. In this study, five synthesized haptens, HS, BS, CS, SA10, and TS and two sulfonamides, SG and SMX were used as haptens, which may or may not contain a ring structure at the N1 position of the sulfonamides, were selected to evaluate the effectiveness for producing group-specific monoclonal antibodies (MAbs). Mice immunized with three different two-ring haptens were used for hybridoma production, which resulted in three unique MAbs recognizing 10, 13, and 15 sulfonamides showing 50 % inhibition (IC₅₀) at concentrations below 100 ng?mL^–1. MAb 4D11 derived from one novel immunizing hapten could recognize 12 sulfonamides with IC₅₀ values ranging from 1.2 to 12.4 ng?mL^–1, almost within 1 order of magnitude. These produced MAbs show lower IC₅₀ values in addition to significantly improved group specificity compared with previously generated MAbs. This study clearly indicates that the careful selection of the immunizing hapten has an important effect on the specificity of the generated antibodies.