Noninvasive optical imaging by speckle ensemble

We propose a new method imaging through scattering media. An object hidden between two biological tissues (chicken breast) is reconstructed from any speckled images obtained from the output of a multichannel optical imaging system. The effect of multiple imaging is achieved with a microlens array. Each lens is the array projects a different speckled image onto a digital camera. The set of speckled images from the entire array is first shifted to a common center and then accumulated into a single average picture.     

Polarization visualization of scattering media with CW laser radiation

The method of polarization visualization of a multiply scattering medium containing macroinhomogeneities based on analysis of polarization spatial distribution of a scattered linearly polarized light is discussed. The treatment is based on statistical properties of the effective optical path distribution of scattered field components. The influence of media scattering properties and the geometry of the experiment on the inhomogeneity image contrast obtained with use of polarization degree and of normalized scattered intensity of radiation as visualization parameters are discussed, as well as spatial resolution achieved in these both cases. Using the results of theoretical analysis and of the experimental model, the relationship between the shapes of spatial distributions of polarization degree and the intensity of the scattered light is considered as a function of the position of the visualized object (an absorbing half-plane immersed in a plane layer of the scattering medium). The opportunities for enhancing the quality of the images formed in this way are also discussed.     

不同波长的散射介质后向散射光偏振度特性

基于Stockes矢量,通过测量以线偏振光和圆偏振光入射时脂肪乳剂后向散射光的偏振度,研究了532nm、650nm和780nm三个波长的光与散射粒子粒径为325nm的脂肪乳剂溶液作用后,其后向散射光的偏振度特性.研究结果表明,对于入射线偏振光,780nm波长后向散射光中的线偏振光成分多于圆偏振光成分,而532nm波长则相反;对于入射圆偏振光,三个波长后向散射光中的圆偏振光成分均多于线偏振光成分;532nm波长的总偏振度高于650nm和780nm两个波长各自的总偏振度;线偏振光的保偏性优于圆偏振光的保偏性,但偏振光在散射介质中的穿透深度较小.因此,后向散射成像技术适用于物体表层成像,而且选择波长略大于粒径的线偏振光可以提高成像质量.     

不同波长的散射介质后向散射光偏振度特性

基于Stockes矢量,通过测量以线偏振光和圆偏振光入射时脂肪乳剂后向散射光的偏振度,研究了532 nm、650 nm和780 nm三个波长的光与散射粒子粒径为325 nm的脂肪乳剂溶液作用后,其后向散射光的偏振度特性.研究结果表明,对于入射线偏振光,780 nm波长后向散射光中的线偏振光成分多于圆偏振光成分,而532 nm波长则相反;对于入射圆偏振光,三个波长后向散射光中的圆偏振光成分均多于线偏振光成分;532 nm波长的总偏振度高于650 nm和780 nm两个波长各自的总偏振度;线偏振光的保偏性优于圆偏振光的保偏性,但偏振光在散射介质中的穿透深度较小.因此,后向散射成像技术适用于物体表层成像,而且选择波长略大于粒径的线偏振光可以提高成像质量.     

Polarization-based range-gated imaging in birefringent medium:Effect of size parameter

We have investigated the effect of size parameter of the scatterer on the image quality obtained with polarization-based range-gated imaging in birefringent turbid medium. Both linearly and circularly polarized light were utilized for imaging.The simulated results indicate that the improvement of visibility is more pronounced using circularly polarized light for the birefringent medium composed of smaller-sized scatterers at lower values of optical thickness and the birefringent medium comprising larger-sized scatterers. In contrast, linearly polarized light provides better image quality for the birefringent medium composed of smaller-sized scatterers at larger values of optical thickness. The evolution of the polarization characteristics of backscattered light and target light under the conditions mentioned above was measured to account for these numerical results.     

Three-dimensional visualization of objects in scattering medium using integral imaging and spectral analysis

This paper presents a three-dimensional visualization method of 3D objects in a scattering medium. The proposed method employs integral imaging and spectral analysis to improve the visual quality of 3D images. The images observed from 3D objects in the scattering medium such as turbid water suffer from image degradation due to scattering. The main reason is that the observed image signal is very weak compared with the scattering signal. Common image enhancement techniques including histogram equalization and contrast enhancement works improperly to overcome the problem. Thus, integral imaging that enables to integrate the weak signals from multiple images was discussed to improve image quality. In this paper, we apply spectral analysis to an integral imaging system such as the computational integral imaging reconstruction. Also, we introduce a signal model with a visibility parameter to analyze the scattering signal. The proposed method based on spectral analysis efficiently estimates the original signal and it is applied to elemental images. The visibility-enhanced elemental images are then used to reconstruct 3D images using a computational integral imaging reconstruction algorithm. To evaluate the proposed method, we perform the optical experiments for 3D objects in turbid water. The experimental results indicate that the proposed method outperforms the existing methods.     

基于偏振信息的遥感图像大气散射校正

大气散射严重影响了航空遥感图像的质量。为了提高航空遥感图像的识别能力,提出一种基于偏振信息的航空遥感图像大气散射校正方法。大气散射具有显著的偏振特性,而对于垂直探测的地物辐射信号偏振度非常低,该方法正是利用大气散射偏振特性与地物目标偏振特性的差别,从图像中提取地物目标辐射信息,从而提高遥感图像的质量。通过机载多波段偏振CCD相机获取航空偏振遥感图像数据,并采用一组443 nm波段的航空偏振图像数据进行图像大气散射校正实验,实验结果表明该方法能有效地进行航空遥感图像的大气散射校正,从而提高了航空遥感图像的识别能力。     

入射光的偏振特性对反射式近场光学显微镜成像结果的影响

用偶极子-自洽场理论模拟计算了反射式近场光学扫描显微镜中入射光的偏振特性对近场成像结果的影响(包括系统分辨率和相关的成像特性)，并给予了相应的分析和解释。分析计算结果表明，入射光偏振性的选择将影响近场光学显微镜的成像质量。在近场区域，用垂直于样品表面偏振的入射光(即x方向偏振)照明成像将得到优于相应水平偏振(即x方向偏振)的入射光照明的系统分辨率。用x方向偏振的入射光照明时，所得光学图像会发生局部的光强对比度反转。     

NOISE 2 imaging system: seeing through scattering tissue with a reference point

We propose a fly-eye-like imaging system for seeing objects embedded in scattering media. Objects are recovered from many speckled images observed by a digital camera through a microlens array. Each microlens in the array generates a speckle image of the object buried between two layers of chicken breast tissue. In the computer each image is Fourier transformed jointly with an image of the speckled pointlike source captured under the same conditions. A set of the squared magnitudes of the Fourier-transformed pictures is accumulated to form a single average picture. This final picture is again Fourier transformed, resulting in the reconstruction of the hidden object.     

Lensless ghost imaging through the strongly scattering medium

Lensless ghost imaging has attracted much interest in recent years due to its profound physics and potential applications. In this paper we report studies of the robust properties of the lensless ghost imaging system with a pseudo-thermal light source in a strongly scattering medium. The effects of the positions of the strong medium on the ghost imaging are investigated. In the lensless ghost imaging system, a pseudo-thermal light is split into two correlated beams by a beam splitter. One beam goes to a charge-coupled detector camera, labeled as CCD2. The other beam goes to an object and then is collected in another charge-coupled detector camera, labeled as CCD1, which serves as a bucket detector. When the strong medium, a pane of ground glass disk, is placed between the object and CCD1, the bucket detector, the quality of ghost imaging is barely affected and a good image could still be obtained. The quality of the ghost imaging can also be maintained, even when the ground glass is rotating, which is the strongest scattering medium so far. However, when the strongly scattering medium is present in the optical path from the light source to CCD2 or the object, the lensless ghost imaging system hardly retrieves the image of the object. A theoretical analysis in terms of the second-order correlation function is also provided.     

物光复合调制的数字全息散斑去噪方法

为了克服在数字全息术中激光源高相干度造成的散斑噪声降低成像质量问题,论文提出将石英退偏器与电控液晶散射片相结合用于数字全息术中。通过在物光路中加入一个石英退偏器,利用退偏器的退偏性能使物光光路中的线偏光变成随机偏振光,降低与参考光的相干程度,实现对散斑噪声的抑制;通过给液晶散射片外加电场可以引起液晶分子的运动和光轴取向改变,调整液晶驱动电压大小来改变入射光的不同散射效果,有效地降低了光源的相干性;分别将单独采用石英退偏器和电控液晶散射片的重建图像与组合装置的重建图像进行对比分析,通过实验验证了所提方法的有效性。实验结果表明：两种实验对象在组合装置下的重建像峰值信噪比分别达到16.91和18.30,结构相似度为0.47和0.43,等效视数较原始重建像提高了42%和30%,散斑指数为1.52和1.29。论文提出的方法可较好地去除散斑噪声,保留更多的图像细节部分。     

Backscattering target detection in a turbid medium by use of circularly and linearly polarized light

The polarization properties of the backscattered light from a turbid medium containing large-diameter (10.143-microm) and small-diameter (0.202-microm) spherical polystyrene particles are studied. It is shown that the difference in the polarization properties of the emerging light that originates at the target and that is backscattered from the medium allows for improvement of image contrast by use of polarized light. Based on the images obtained by the CCD camera, the polarization memory effect with circularly polarized light is demonstrated to have an advantage over the linear polarization technique in imaging a highly reflective target inside a turbid medium containing large particles.     

Polarized optical coherence imaging in turbid media by use of a Zeeman laser

A method that uses a Zeeman laser in conjunction with a Glan-Thompson analyzer to image an object in a turbid medium is proposed. A heterodyne signal is generated only when the scattering photons are partially polarized, and the spatial coherence is not seriously degraded after the signal propagates in the turbid medium. A system combining polarization discrimination with optical coherence detection to image the object in a scattering medium is successfully demonstrated. The medium is a solution of polystyrene microspheres measuring 1.072 mum in diameter suspended in distilled water contained in a 10-mm-thick quartz cuvette. The advantages of this optical system, including better selectivity of the weak partially polarized scattering photons and better imaging ability in higher-scattering media, are discussed.     

一种分焦平面偏振成像系统光源标定方法北大核心CSCD

水下偏振成像技术是目前水下成像研究的热点,由于自然光在水中衰减大,水下成像系统多采用主动照明方式。针对分焦平面偏振成像系统中偏振照明光源与偏振探测像元偏振方向不匹配引起采集图像偏振信息存在的偏差,进而影响目标图像增强质量的问题,提出了一种分焦平面偏振成像系统光源标定方法。阐述了偏振光源的标定原理,然后给出偏振光源标定的实施步骤,最后采用偏振去雾算法和图像质量评价方法对标定前后的水下目标图像进行了图像增强和图像质量评价。评价结果表明,标定后的增强图像质量优于未标定的增强图像质量,平均梯度最大提升了2.48倍。该标定方法简单有效,实用性强,适用于分焦平面偏振成像系统偏振光源标定。     

透过散射介质对直线运动目标的全光成像及追踪技术

光散射是限制光传输以及降低和破坏光学成像性能的主要因素,透过复杂散射介质对运动目标的全光成像是光学领域极具挑战性的技术之一.本文提出一种利用散斑差值自相关透过散射介质对运动目标进行实时追踪的方法.采用赝热光照明,基于光学记忆效应理论,通过对运动目标采集的两帧散斑做差值,然后做自相关运算,计算目标移动的距离,实现对目标的实时追踪,并且利用相位恢复算法进行简单处理就可以重建隐藏目标.对该方法进行了实验验证,成功地对隐藏的运动目标实现了成像与追踪.这种透过散射介质对运动目标的全光成像及实时追踪技术,在生物医学等领域具有重要应用潜力.     

基于赝热光照明的单发光学散斑成像

散射介质对光的散射是当前限制光学成像深度或距离的一个严重的问题.本文首先数值模拟比较了光透过随机散射介质成像研究中常用的基于光学记忆效应(memory effect, ME)和自相关(autocorrelation, AC)方法的HIOER算法和乒乓(Ping-Pang, PP)算法的优缺点.通过对HIOER算法和PP算法的恢复效果和迭代次数进行比较,发现PP算法在保持较高恢复效果的前提下拥有更快的运行速度.实验中,利用连续HeNe激光器和旋转毛玻璃产生赝热光源,通过物镜对随机散射介质后数毫米距离内的不同形状物体进行了单帧成像,并采用PP算法成功地恢复出微米量级物体的实际图像.这一研究结果将进一步促进ME和AC方法在深层生物组织医学成像研究上的应用.最后,实验研究了不同的物镜和散射介质的间距对成像恢复的放大率、分辨率和图像强度的影响特性,并进行了详细研究.     

Real-time two-dimensional imaging in scattering media by use of a femtosecond Cr(4+):forsterite laser

An original femtosecond Cr(4+):forsterite laser source associated with a nonlinear optical correlator was used for imaging through scattering media with 1220-nm light. The system, which operates as an ultrafast optical gate by sum-frequency generation in a nonlinear crystal, was able to detect the light reflected from a resolution chart hidden in a turbid medium, at an attenuation of as much as 15 mean free paths. When the object was illuminated with a collimated beam, real-time two-dimensional images were obtained, with a maximum transverse resolution of ~20 microm.     

关于部分偏振光能量传递和偏振态的光线椭圆分析方法

部分偏振光传播时的光强和偏振态变化情况比较复杂, 尤其是当大数值孔径成像时, 光束的偏振态还会影响成像质量. 本文提出一种用于分析部分偏振光能量传递和偏振态的光线椭圆方法, 采用光线椭圆叠加的办法来分析光束在各向同性的均匀介质中传输时能量和偏振态的变化情况, 同时直观性好, 计算量小. 论文最后, 对大数值孔径、 高像质的齐明透镜系统讨论了入射无偏振光的能量、 偏振态变化, 以及偏振效应问题. 结果表明, 大数值孔径使成像光束中TM偏振光强度相对增加, 影响成像对比度; 提高像方介质的折射率, 会改善此种偏振效应问题.     

A Monte Carlo approach for the calculation of polarized light: application to an incident narrow beam

Monte Carlo approaches to compute multiple scattering of polarized light are examined. A Backward Monte Carlo (BMC) method is developed to solve the Stokes vector of the multiple scattered light for an inhomogeneous scattering medium with boundaries. A generalized form of the BMC method in vector notation is proposed. This method can determine the scattered light with sufficient accuracy in both intensity and polarization compared to the same calculation using the doubling-adding method for a plane parallel medium.For application to a narrow incident beam and an inhomogeneous medium, a modified BMC method is developed, borrowing a concept from the Forward Monte Carlo (FMC) method for the first scattering events. Furthermore, a modification of the total scattering matrix, i.e., the combination of the derived scattering matrix with its time inverse, is discussed. This BMC method can be used successfully for model calculations of lidar and other laser measurements of polarized light.     

Visualization of scattering media upon backscattering of a linearly polarized nonmonochromatic light

The method of polarization visualization of multiply scattering macroinhomogeneous media, based on analysis of the spatial distributions of polarization characteristics of a linearly polarized radiation backscattered from a medium, is discussed. The effect of optical characteristics of the medium and the scattering geometry on the quality of the images obtained in the case of visualization of an absorbing heterogeneity immersed into a multiply scattering medium is considered. The comparative analysis of the quality of formed images was performed with the use of different polarization characteristics of the backscattered radiation as a visualization parameter. The theoretical interpretation of the obtained experimental results is given within the framework of the phenomenological approach based on the concept of the distribution of the effective optical paths of partial components of the scattered optical field. To calculate the probability density of the effective optical paths, the statistical simulation method was used.