数字散斑法在局域剪切带三维变形研究中的应用

在适当的温度、应变率和预变形下,合金材料的拉伸试验中,将会出现伴随应力锯齿形跌落的雪崩式剪切变形带,即波特文-勒夏特利埃(Portevin-Le Chatelier,PLC)效应。利用高速数字摄像系统(分辨力1000 frames/s)并结合数字散斑干涉法(Digital speckle pattern interferometry,DSPI)和数字散斑相关法设计了一套光学变形测量系统,实现了拉伸试验中对试件表面三维变形的实时、精确测量。利用该光学系统对铝铜合金试件在拉伸试验中产生的跳跃传播的局域剪切带瞬态成核过程进行捕捉。通过结合数字散斑相关法得到的面内变形定量结果和数字散斑干涉法得到的表现离面变形的条纹图,再现了剪切变形带成核和传播瞬间的三维变形过程。     

运动变形表面在相干光照明下的自由空间散斑位移分布

物体表面在一束相干光照明下的空间散斑位移场分布对于分析物体表面状态及位移、变形等信息具有重要意义。本文应用散斑场的相关方法与散斑相移技术得到了物体表面位移及变形参量与自由空间衍射场散斑位移的一般关系,给出了这种一般关系的简化与分离条件,并对物体平移、转动及热加载条件下的蜂窝结构进行了实验。     

时间序列动态散斑相关跟踪测量原理及其应用

在对散斑场的特性进行研究与分析的基础上,提出了时间序列动态散斑相关跟踪测量法,它弥补了一般散斑相关法不适合大变形测量的缺点,扩大了散斑相关法的应用范围.运用这种方法不仅可以测量大动态范围的面内变形,而且可以测量分析面内动态变形过程和变形速度.     

斜光轴面内位移测量的数字散斑相关法研究

以工程环境中远距离位移和位移场的光学测量为研究课题,分析了远距离斜光轴成像时,像模糊和成像位置变化对白光数字散斑相关方法产生的影响,给出了这两种影响的误差理论计算公式。提出使用参考测量技术克服斜光轴成像位置变化带来影响,给出一种新的远距离斜光轴高精度测量面内位移的方法,在2～50m处作静载挠度测量,其最大相对误差小于1％,测量精度在实验室环境和工程测量环境中都得到了验证。该方法无需共轴光路的测量环境要求,特别适用于桥梁、高速公路立交桥的静载挠度测量等工程应用。使用高速图像采集卡,该方法可应用于斜光轴动态位移测量,拓展了数字散斑相关方法的应用范围。     

Application of iteration and finite element smoothing technique for displacement and strain measurement of digital speckle correlation

In this paper, an improved method for measuring displacement in digital speckle correlation technology, which is based on an iterative and spatial-gradient algorithm, is developed. After obtaining full-field displacement, both finite element method and 2D generalized cross-validation (GCV) algorithm are adopted for smoothing the displacement field, and then the strain field can be obtained from the smoothed displacement field. The method is estimated by simulated speckle patterns and three-point bending experiment. All the results show the improved method can obtain a reasonable estimation of displacement and strain fields in digital speckle correlation method.     

立体摄影术与数字散斑相关方法相结合用于研究三维变形场

采用立体摄影术与数字图像相关技术相结合的方法测量了三维位移场。首先利用两个CCD摄像机在空间两个不同位置拍摄物体表面在变形前后同一个区域之间的散斑图像;然后利用数字散斑相关技术求解这四幅散斑图像之间的相对位移;最后利用立体摄影的几何转换公式来确定物体表面的三维变形场。给出了该立体摄影测试系统的标定结果以及编织复合材料试件的三维变形测量结果。     

基于散斑干涉的光滑表面变形快速检测

针对目前光滑表面力学性能测试困难的情况,建立了一种改进的数字激光散斑干涉测量系统。首先通过新的散斑干涉光路设计实现散斑照射,同时采用空间载波傅里叶变换法,对光滑零件加载变形的动态散斑干涉图像进行处理,最后得到光滑表面的变形场分布情况。该方法不对被测表面进行任何处理,可实现光滑表面的高精度全场变形测量。实验结果表明:最大变形处为镜面板的中央,测得最大变形量分别为1.936、1.861和1.797μm,与中心变形预设值接近。该方法光路简单、测量方案切实可行,能够实现光滑表面变形的快速动态测量。     

Continual deformation analysis with scanning phase method and time sequence phase method in temporal speckle pattern interferometry

If a laser beam illuminates a continual deformation object surface, it will lead to a temporal speckle pattern on the observation plane. Recording this time-dependent speckle pattern the deformation of the surface of an object can be obtained. Two methods, scanning phase method (SPM) and time sequence phase method (TSPM), have been introduced for measuring the displacement caused by the deformation in temporal speckle pattern interferometry (TSPI). Their principle is that by capturing a series of speckle interference patterns related to the object deformations, the fluctuations in the intensity of the interference patterns can be obtained. Through scanning these fluctuations and estimating both the average intensity and modulation of the temporal speckle interference patterns, the phase maps for whole-field displacements are calculated. In this way one is capable of quantitatively measuring continual displacements simply using a conventional electronic speckle pattern interferometry (ESPI) system without phase shifting or a carrier. The elaboration on the new methods is given in this paper and experiments are performed to demonstrate their performance with a conventional ESPI system.     

Simultaneous measurement of whole in-plane displacement using phase-shifting ESPI

A novel method for simultaneously measuring whole field in-plane displacements by using optical fiber phase-shifting electronic speckle pattern interferometry (ESPI) is presented in this paper. A 1 × 4 single mode optical fiber beamsplitter is employed to split the laser beam into four beams of equal intensity. One pair of fibers is utilized to illuminate the diffuse target at equal angles in the horizontal plane so it is sensitive only to horizontal in-plane displacement. Another pair of optical fibers is set to be sensitive only to vertical in-plane displacement. The polarization directions of light emitted by fibers are the same for each pair, but are at a right angle between pairs. The optical fibers are equal in length for each pair, but are not equal between two pairs. In this case the speckles are interference between each pair of fibers, thus the horizontal and vertical displacement components can be obtained simultaneously. By means of a fiber phase shift technique we can obtain the quantitative data of whole field displacements. This method has made it possible to study the in-plane displacement of a thin metal plate, and the examples of the results are shown to demonstrate the novel method.     

基于数字图像相关的透明材料厚度测量

提出了一种测定透明材料厚度的新方法。该方法是基于透明材料对光的折射特点,利用光斑点面内位移与材料厚度的变化关系,将厚度的测量转化为对面内位移的测量。将此方法与数字图像相关法相结合,实现了单摄像机对厚度的测定。对轴向拉伸状态下的有机玻璃板的厚度变化进行了测定,将实验结果与理论值进行了对比,两者符合较好,证明了该实验方法的有效性和可行性。     

超声散斑相移法测量技术

超声散斑相移法能满足工程建设中对水下物内层界面关键点位移进行测量的特殊要求。测量时,引入数字参考信号与物面测点上的散斑信号进行数字干涉,获得叠加信号强度。界面位移前后,应用软件逐步改变参考信号相位,可逐步改变叠加信号强度,根据这些信号强度值可计算出测点的位移量。应用此技术对水下试件内层表面的法线和切线方向上的位移进行了实测,测量结果与理论值有较好的吻合;研究表明打磨后的粗糙外层界面不影响应用相移法进行测量。在应用相移法测量时,不需声像转换,不需全场扫描,测量精度不受散斑尺寸限制。      

The simulation of the origin and propagation of speckle field generated through a plane wave and Gaussian beam and its verification by speckle correlation method

This paper presents a simulation model of the origin and propagation of speckle field within the Fresnel approximation and verification of the model through a speckle correlation method for determination of in-plane object's translation. There is used a convolution form of the Fresnel–Kirchhoff diffraction integral in the simulation model instead of often used Fast Fourier Transform approach. A possible way of simulation of the light scattering by object's surface and in-plane translation of the illuminated surface is mentioned, whereas two types of illumination (plane wave and Gaussian beam) are used. Finally, results of numerical correlation of generated displaced speckle fields are shown and compared with the results obtained by theoretical relations.     

数字散斑技术在混凝土单轴压缩试验中的应用

数字散斑技术作为一种新兴的测量方法,它具有非接触、全场量测、精度高、操作简单等特点,随着计算机技术的迅猛发展,数字散斑技术得到了广泛的应用与研究。针对混凝土在外荷载作用下具有明显的非均匀变化的特征,借助传统的测量方法很难得到混凝土表面的全场变形结果的问题,结合数字散斑相关方法测量技术,开展了混凝土单轴压缩试验,拍摄了混凝土表面在单轴压缩过程中的位移与应变矢量场,为分析混凝土试件的损伤区域奠定了基础;与电测法测量结果进行了对比,其测量结果表明,这两种测量方法误差相对较小,且数字散斑技术能更早的发现混凝土表面的破坏,验证了数字散斑相关方法的准确性和可靠性。借助数字散斑技术可以更加方便准确的得到材料表面的变形场,这也将在一定程度上促进土木工程领域的发展,具有广阔的应用前景。     

Stroboscopic digital speckle pattern interferometry for vibration analysis of microsystem

In this paper, vibration measurement and analysis of microsystems, such as micro-electro-mechanical systems (MEMS) by using stroboscopic digital speckle pattern interferometry (DSPI) is presented. Because of the speckle interferometry, the technique is suited for samples which have a rough surface or whose surfaces can be sprayed into a scattering surface. A laser speckle microinterferometer incorporated with optoelectronic devices for a stroboscopic illumination and a synchronization of the signals between excitation and stroboscopic illumination is described and demonstrated. The system can measure both out-of-plane and in-plane displacement under either a static or dynamic loading. The fundamental is explained and some applications are demonstrated.     

The study of fractal correlation method in the displacement measurement and its application

The classical digital speckle, or digital image, correlation method of deformation measurement is based on gray level correlation between unformed and deformed digital images. The pattern of artificial random speckles and the natural textures on some object's surfaces have fractal characteristics, and their fractal dimensions represent both gray and morph information. Furthermore, the fractal dimensions are stable feature parameters of the patterns. The digitized images of the patterns are confirmed to be also fractals. By this fact, a new method of displacement measurement is developed in the paper, based on the fractal dimensions correlation. The in-plane displacement fields of a body can be acquired. In order to verify the validity of the new method, an experiment has been designed and the results have been compared with those obtained from the classical digital image correlation method. The validity of the new method is not less than that of classical method. Further discussions about the traits and the developing vista of the method are given at the end.     

Microscopic 3-D displacement field measurements using digital speckle photography

A technique to measure object shape and 3-D displacement fields in micro-scale is offered by microscopic stereo digital speckle photography. The displacement of the random features that are often present on many engineering surfaces when viewed in a microscope is measured with the system, using image correlation. In this paper the equipment, physical model and calibration routines are described. The technique can be applied for sub-mm sized objects of arbitrary shape for small deformation fields. As a verifying experiment, an in-plane rotation of a flat calibration plate is presented. The expected in-plane errors are shown to be less than 0.1 μm and the corresponding out-of-plane errors about three times larger. As a pilot experiment, micro-structural paper expansion is studied, when exposed to humidity. The scaling properties of the microscope as well as the sampling criteria and reliability of the system are discussed in detail.     

Application of improved Speckle contouring technique to surface roughness measurements

One of the well known drawbacks in Electronic Speckle Pattern Interferometry (ESPI) is the poor fringe density due to electronic and speckle noise and decreasing fringe visibility with increasing speckle decorrelation. As recently reported we suggested improving the fringe density and enlarging the measurement range by the incremental addition of phase images. The technique has already been successfully applied to in-plane and out-of-plane displacement field measurements of carbon-fibre reinforced composites. This paper demonstrates how the technique can be used to improve the sensitivity and to extend the measurement range for speckle contouring applications. The angular correlation of the speckle phase images is used to get the desired 3D information of the investigated object surface. It is demonstrated how the angular speckle contouring techinque can easily be automated with respect, for example, to possible industrial applications. Roughness measurements are carried out on milled Rugo test surfaces. All measurements are performed without the usual vibration isolation, and of course, without the treatment of the surface with fine, white powder for contrast enhancement, which would falsify the results.     

Digital speckle correlation method with compensation technique for strain field measurements

In the strain field measurements, especially in large strain field measurements, the correlation coefficient values obtained by the digital speckle correlation method are usually very low due to the relative pixel movement of the subset. The measuring error, therefore, is increased. A primary method, that is called compensation algorithm, is introduced for improving the correlation coefficient. A flow scheme with the compensation algorithm of our software is developed and some improved techniques for reducing the calculation time and error are discussed in the paper. After obtaining a set of displacement data with high correlation coefficient, a de-noise wavelet processing is adopted. It is obvious that the measuring accuracy of the strain field is better then before. A strain field of testing experiment is performed with this compensation technique. The correlation coefficients can increase from 0.70 to 0.99, which will be of much benefit for the improvements of the measuring accuracy.     

激光散斑在大学物理实验教学中的应用

介绍了激光散斑在大学物理实验中的几个具体应用.从激光散斑的特征公式出发,分析了利用激光散斑测量透镜焦距的原理和方法;介绍了应用双曝光散斑图测量物体面内位移的原理和方法;利用激光散斑的统计特性,提出了一种测量高斯光束特性参数的新方法.这些方法光路设计简便易行,且具有实用价值,引入到大学物理实验中是可取的,也是可行的.