桥头碳上氮杂芳基功能化的双吡唑甲烷与羰基钨反应

研究了(氮甲基咪唑-2-基)双(3,5-二甲基吡唑)甲烷(L1),2-吡啶基双(3,5-二甲基吡唑)甲烷(L2)及4-吡啶基双(3,5-二甲基吡唑)甲烷(L3)与羰基钨的反应,合成了一系列以单齿,双齿及三齿氮配位的羰基金属衍生物LW(CO)5(L=L1或L3),LW(CO)4(L=L1,L2或L3)和LW(CO)3(L=L1或L2)。核磁,红外及X-射线单晶衍射分析表明这3种配体表现出了可变的配位方式。在LW(CO)5中,当配体为L1时,其倾向于通过咪唑氮与金属配位,而为L3则倾向于利用吡啶氮与金属作用;在LW(CO)4中,配体L1表现为通过咪唑氮和吡唑氮原子配位的[N,N′]双齿配体,而L2和L3表现为通过吡唑氮原子配位的[N,N]双齿配体;在LW(CO)3中,L1和L2起着[N,N,N′]三齿螯合配体的作用。     

桥头碳上氮杂芳基功能化的双吡唑甲烷与羰基钨反应

研究了(氮甲基咪唑-2-基)双(3,5-二甲基吡唑)甲烷(L¹),2-吡啶基双(3,5-二甲基吡唑)甲烷(L²)及4-吡啶基双(3,5-二甲基吡唑)甲烷(L³)与羰基钨的反应,合成了一系列以单齿,双齿及三齿氮配位的羰基金属衍生物LW(CO)₅ (L=L¹或L³),LW(CO)₄ (L=L¹,L²或L³)和LW(CO)₃ (L=L¹或L²).核磁,红外及X-射线单晶衍射分析表明这3种配体表现出了可变的配位方式.在LW(CO)₅中,当配体为L¹时,其倾向于通过咪唑氮与金属配位,而为L³则倾向于利用吡啶氮与金属作用;在LW(CO)₄中,配体L¹表现为通过咪唑氮和吡唑氮原子配位的[N,N']双齿配体,而L²和L³表现为通过吡唑氮原子配位的[N,N]双齿配体;在LW(CO)₃中,L¹和L²起着[N,N,N']三齿螯合配体的作用.     

Synthesis of Bis(2-Pyridylphosphino)Alkanes in Superbasic Medium and Their Hydroxymethyl Derivatives

Abstract

Novel P-H-diphosphinoalkanes with pyridyl substituents at the phosphorus atoms have been obtained in good or moderate yields by the interaction of primary 2-pyridyl-phosphine with dichloroalkanes in superbasic medium. The formation of novel 1-(2-pyridyl)-1-phosphacyclopentane together with bis(2-pyridylphosphino)butane was observed as the result of the interaction of 2-pyridylphosphine and 1,4-dichlorobutane under the same reaction conditions. The reaction of the bis(2-pyridylphosphino)alkanes thus obtained with formaldehyde leads to the formation of the corresponding hydroxymethyl derivatives.     

Oxygenation of aromatic substrates over Pd(II) catalysts bearing bis(pyrazol-1-yl)alkanes ligands

Summary Liquid phase oxygenation of 1-tetralin, ethylbenzene, cyclohexane and toluene is describe using four catalyst precursors such as: (CH₂)n(PzR)PdCl₂ (n=1,2; R=H, Me) at T=100°C, P_air= 5.4 atm, substrate/catalyst ratio=100 for 3 h,. It was observed that the type of alkyl bridge between the pyrazolyl ligands has an effect on the catalytic activity.     

Dinuclear Pentacarbonyl Tungsten Complex Bridged by Bis（3,5-dimethylpyrazol- 1- yl ） methane

IntroductionPoly(pyrazol 1 yl)alkanes,especiallybis(pyrazol 1 yl)alkanes ,havebeenoneofpopularpolydentatenitrogendonorligandssinceTrofimenko’sfirstreport1andJulia’slatermodification .2 Ithasbeenfoundthatthecoordinationbehavioroftheseligandscaneasilybeadjustedbychang ingtheelectronicandstericcharacteristicsofsubstituentsonthepyrazolering .Recentinvestigationshavealsoshownthatthecentralcarbonatomoftheseligandscanbemodifiedbythevariousfunctionalgroupstoformversatileheteroscorpionateligands ,wh…     

有机锡修饰的双吡唑甲烷及其与W(CO)5THF的反应

通过双吡唑甲基锂(LiCHPz₂)与有机锡卤化物(R₃SnX)的反应合成了一系列有机锡修饰的双吡唑甲烷配体(R₃SnCHPz₂).由于锡上取代基的不同,这些配体与W(CO)₅THF反应时表现出了不同的反应方式.三芳基锡修饰的双吡唑甲烷与W(CO)₅THF反应发生Sn-C(sp₃)键对W(0)中心的氧化加成;而三苄基锡修饰的双吡唑甲烷与其反应时仅给出羰基取代产物[Bz₃SnCHPz₂W(CO)₄].另外,二苯基苄基锡以及三(2-苯基-2-甲基丙基)锡修饰的双吡唑甲烷配体类似的反应导致配体的分解,产生单吡唑配体取代的羰基钨衍生物[W(CO)₅PzH]以及脱有机锡的双吡唑甲烷四羰基钨衍生物[CH₂Pz₂W(CO)₄].     

Bis(pyrazol-1-yl)propane as a bulky Ligand: X-ray Crystal Structure Determination of its Adduct with Zinc(II) Chloride

The steric misfit between a geminal bis(pyrazol-1-yl)propane ligand and tetrahedral coordination leads to distortion of the latter in the title compound: N? Zn? N is 89.5(1)°, Cl? Zn? Cl 116.78(5)°. Comparison of the Zn? N (2.058(3), 2.046(3) Å) and Zn? Cl (2.209(1), 2.229(1) Å) distances with those of related compounds evidences the steric bulkiness of the title ligand.     

微波作用下合成双(苯并咪唑-2-基)甲烷衍生物

在无溶剂、无催化剂存在条件下, 用微波促进5-取代-1H-苯并咪唑-2-乙酸乙酯和4-取代-1,2-邻苯二胺反应, 合成了取代双(苯并咪唑-2-基)甲烷衍生物, 产率均在80%以上. 产物结构经IR, ¹H NMR, MS等进行了表征.     

微波辐射下双(2-苯并咪唑基)烷烃的合成

微波辐射条件下合成了7种双（2－苯并咪唑基）烷烃,为这类化合物的合成提供了一种新方法,相比于常规反应,反应时间大为缩短且产率相当。     

Convenient Synthesis of Bis(indol)alkanes by Niobium(V) Chloride

Bis(indolyl)alkanes have been synthesized in excellent yields in the presence of a catalytic amount of niobium(V) chloride under solvent-free conditions.     

Copper(II) complexes of bis(pyrazol-1-yl)methane - Synthesis, spectroscopic characterization, X-ray structure and DFT calculations

Two novel copper(II) complexes incorporating bis(pyrazol-1-yl)methane ligand (bpzm) have been synthesized. The compounds [CuCl(bpzm)₂(H₂O)]Cl·H₂O (1) and [Cu(N₃)₂(bpzm)]_n (2) have been studied by IR, UV-Vis spectroscopy and X-ray crystallography. The experimental studies on the compounds 1 and 2 have been accompanied computationally by the density functional theory (DFT) calculations.     

New multidentate heteroscorpionate ligands: N-Phenyl-2,2-bis(pyrazol-1-yl)thioacetamide and ethyl 2,2-bis(pyrazol-1-yl)dithioacetate as well as their derivatives

New multidentate heteroscorpionate ligands, N-phenyl-2,2-bis(3,5-dimethylpyrazol-1-yl)thioacetamide PhHNCSCH(3,5-Me₂Pz)₂ (1), N-phenyl-2,2-bis(3,4,5-trimethylpyrazol-1-yl)thioacetamide PhHNCSCH(3,4,5-Me₃Pz)₂ (2), and ethyl 2,2-bis(3,5-dimethylpyrazol-1-yl)dithioacetate EtSCSCH(3,5-Me₂Pz)₂ (8), have been synthesized and their coordination chemistry studied. These heteroscorpionate ligands can act as monodentate, bidentate, or tridentate ligands, depending on the coordinate properties of different metals. Reaction of W(CO)₆ with 1 or 2 under UV irradiation yields monosubstituted carbonyl tungsten complexes W(CO)₅L (L = 1 or 2), in which N-phenyl-2,2-bis(pyrazol-1-yl)thioacetamide acts as a monodentate ligand by the s-coordination to the tungsten atom. In addition, these monosubstituted tungsten complexes have also been obtained by heating ligand 1 or 2 with W(CO)₅THF in THF. While similar reaction of Fe(CO)₅ with 1, 2, or 8 under UV irradiation results in tricarbonyl iron complexes PhHNCSCH(3,5-Me₂Pz)₂Fe(CO)₃ (5), PhHNCSCH(3,4,5-Me₃Pz)₂Fe(CO)₃ (6), and EtSCSCH(3,5-Me₂Pz)₂Fe(CO)₃ (9), respectively, in which N-phenyl-2,2-bis(pyrazol-1-yl)thioacetamide or ethyl 2,2-bis(pyrazol-1-yl)dithioacetate acts as a bidentate ligand through one pyrazolyl nitrogen atom and the CS π-bond in an η²-C,S fashion side-on bonded to the iron atom to adopt a neutral bidentate κ²-(π,N) coordination mode. Treatment of the lithium salt of 1 with Co(ClO₄)₂ · 6H₂O gives complex [PhNCSCH(3,5-Me₂Pz)₂]₂Co(ClO₄) with the oxidation of cobalt(II) to cobalt(III), in which N-phenyl-2,2-bis(3,5-dimethylpyrazol-1-yl)thioacetamide acts as a tridentate monoanionic κ³-(N,N,S) chelating ligand by two pyrazolyl nitrogen atoms and the sulfur atom of the enolized thiolate anion.     

Synthesis and crystal structures of Group 6 metal carbonyl complexes containing S-rich bis(pyrazol-1-yl)methane ligands

The reaction of 3(5)-methylthio-5(3)-phenylpyrazole with dibromomethane under phase-transfer catalytic conditions only affords a new ligand, bis(3-phenyl-5-methylthiopyrazol-1-yl)methane. However, the reaction of 3(5)-methylthio-5(3)-p-methoxyphenylpyrazole or 3(5)-methylthio-5(3)-tert-butylpyrazole with dibromomethane under the same conditions yields three isomers, respectively, indicating that the substituents significantly affect the steric and electronic properties of pyrazole ring during the formation of ligands. Treatment of these potential polydentate ligands with M(CO)₆ (M=Cr, Mo or W) under UV irradiation at room temperature affords (NN)M(CO)₄ derivatives, in which some complexes contain asymmetric substituted bis(pyrazol-1-yl)methane ligands. The X-ray crystal structure analyses indicate that the sulfur atoms in these complexes do not take part in the coordination to the metal centers, and S-rich bis(pyrazol-1-yl)methanes actually act as bidentate chelating ligands by two nitrogen atoms. It is also interesting that in order to reduce the repulsion of methyl groups with carbonyls, the methyl groups in these complexes are oriented away from the metal centers.     

Synthesis of 2,2-di(pyrazol-1-yl)enones via the 2:1 coupling of pyrazoles and acylbromoacetylenes in solid alumina

Pyrazoles were reacted with acylbromoacetylenes in solid Al₂O₃ at room temperature to afford 2,2-di(pyrazol-1-yl)enones in 22–69% yield. The reaction proceeds via isolable intermediates, (Z)-2-bromo-2-(pyrazol-1-yl)enones. This unexpected 2:1 coupling is in contrast to similar reactions of pyrroles, furans and thiophenes, which give the corresponding acylethynyl derivatives. This reaction opens a one-pot route to inaccessible gem-dipyrazolylenones, which have potential applications as bidentate chelating ligands and building blocks for drug design.     

Chemical behavior of ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands in the presence of palladium(II) chloride

The synthesis, structural characterization, and coordination behavior of ditopic ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands (ortho-(OH)₂C₆H₃-4-CHpz₂, ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂, and ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂) with pyrazole, 3-phenylpyrazole, and 3-tert-butylpyrazole as donors are described. The reaction of a soluble PdCl₂-source with ortho-(OH)₂C₆H₃-4-CHpz₂ in acetonitrile yielded the related square-planar N,N-coordinated Pd(II) dichloride complex, whereas treatment of ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂ or ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂ with PdCl₂ in acetonitrile resulted in degradation of these ligands. The Pd(II) complexes trans-(3-PhpzH)₂PdCl₂ and trans-(3-tBupzH)₂PdCl₂ were isolated and fully characterized including X-ray diffraction analyses.     

Synthesis, structure and characterization of M---Sn (M=Mo, W) bonded heterobimetallic complexes containing bis(pyrazol-1-yl)methane ligands

The reaction of bis(pyrazol-1-yl)methane tetracarbonylmolybdenum(0) or tungsten(0) complexes with RSnCl₃ (R=Ph, Cl) at room temperature yielded heterobimetallic complexes CH₂(Pz)₂M(CO)₃(Cl)(SnCl₂R) (Pz represents substituted pyrazole; M=Mo or W; R=Ph or Cl) in good yields, which have been characterized by elemental analysis, ¹H NMR and IR spectroscopy. The reaction of bis(3,5-dimethyl-4-halopyrazol-1-yl)methane tetracarbonyl tungsten with PhSnCl₃ did not take place even in refluxing CH₂Cl₂. The electronic and steric characteristics of substituents on the pyrazole ring remarkably influence the structures of the products. The structures of CH₂(3,5-Me₂-4-BrPz)₂W(CO)₃(Cl)(SnCl₃) (8) and CH₂(4-BrPz)₂Mo(CO)₃(μ-Cl)(SnCl₂Ph) (17) (Pz: pyrazole) determined by X-ray crystallography show that no chlorine-bridged W---Sn bond is observed in complex 8, while one chlorine-bridged Mo---Sn bond exists in complex 17. The Sn---M bond length is 2.7438(5) Å in complex 8 (W---Sn) and 2.7559(4) Å in complex 17 (Mo---Sn).     

Efficient Synthesis of Bis(4-Dimethaminophenyl)arylmethanes and Bis(4-Diamethaminophenyl)alkanes Using Iodine Reagent

A novel synthetic utility of NaICl₂ for the preparation of bis(4-dimethaminophenyl)arylmethanes and bis(4-dimethaminophenyl)alkanes is described. In the presence of an aqueous solution of NaICl₂, the reaction of arenes with aromatic aldehydes gives corresponding triarylmethane derivatives regioselectively in moderate to good yields. The method is also useful for the preparation of diarylalkane derivatives by using aliphatic aldehydes.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications ^® to view the free supplemental file.     

Functionalized bis(pyrazol-1-yl)methanes by organotin halide on the methine carbon atom and their related reactions

The modification of bis(pyrazol-1-yl)methanes by organotin halide on the methine carbon atom has been successfully carried out, and their related reactions have also been studied. Bis(3,5-dimethylpyrazol-1-yl)(iododiphenylstannyl)methane [Ph₂ISnCH(3,5-Me₂Pz)₂] can be obtained by the selective cleavage of the Sn-C_sp² bond in bis(3,5-dimethylpyrazol-1-yl)triphenylstannylmethane with I₂ in a 1:1 molar ratio, while {di(tert-butyl)chlorostannyl}bis(3,5-dimethylpyrazol-1-yl)methane [(t-Bu)₂ClSnCH(3,5-Me₂Pz)₂] and {di(tert-butyl)chlorostannyl}bis(3,4,5-trimethylpyrazol-1-yl)methane [(t-Bu)₂ClSnCH(3,4,5-Me₃Pz)₂] are easily prepared by the reaction of the bis(3,5-dimethylpyrazol-1-yl)methide or bis(3,4,5-trimethylpyrazol-1-yl)methide anion with di(tert-butyl)tin dichloride. The molecular structure of [(t-Bu)₂ClSnCH(3,5-Me₂Pz)₂] determined by X-ray structure analysis indicates that bis(3,5-dimethylpyrazol-1-yl)methide acts as a bidentate monoanionic κ²-[C,N] chelating ligand. Reaction of these bis(pyrazol-1-yl)methanes functionalized by organotin halide with W(CO)₅THF results in the oxidative addition of the relative electrophilic Sn-X (X = Cl or I) bond instead of the Sn-C_sp³ bond to the tungsten(0) atom, yielding new metal-metal bonded complexes R₂SnCHPz₂W(CO)₃X (R = Ph or t-Bu, Pz represents substituted pyrazol-1-yl). Furthermore, treatment of the oxidative addition product (t-Bu)₂SnCH(3,5-Me₂Pz)₂W(CO)₃Cl with n-BuLi results in known complex CH₂(3,5-Me₂Pz)₂W(CO)₄ with the loss of the organotin fragment. In addition, reaction of Ph₂ISnCH(3,5-Me₂Pz)₂ with 2-PySNa (Py = pyridyl) leads to the replacement of iodide by 2-PyS⁻ anion to give Ph₂(2-PyS)SnCH(3,5-Me₂Pz)₂, which subsequently reacts with W(CO)₅THF to result in the decomposition of this ligand, also yielding the known bis(3,5-dimethylpyrazol-1-yl)methane derivative of CH₂(3,5-Me₂Pz)₂W(CO)₄.     

无溶剂条件下碘催化不对称双吲哚的合成

在室温以及无溶剂条件下,吲哚与烷基-3-吲哚基甲醇在碘的催化下以73％～99％的高收率得到不对称双吲哚烷基化合物。其结构经^1H NMR,IR及MS表征。     

Crystal Structure of CH(3,5-Me_2-4-EtPz)_2 W(CO)_3SnPh_3·0.25C_6H_6 (Pz = Pyrazol-1-yl)

1 INTRODUCTION As a kind of popular polydentate nitrogen donor ligands, poly(pyrazol-1-yl)alkanes, especially bis(pyrazol-1-yl)methanes, have been widely used for many years to synthesize main group[1, 2] and transition metal complexes[3, 4]. Recent inve…