3D Bioprinting with UVA1 Radiation and Photoinitiator Irgacure 2959: Can the ASTM Standard L929 Cells Predict Human Stem Cell Cytotoxicity?

3D bioprinting often involves human mesenchymal stem cells (hMSC) that are differentiated into the desired cells to replace body parts like ears. Scaffolds of crosslinked hydrogels offer structural support during differentiation. Different photoinitiators are used to make free radicals that photocrosslink these hydrogels; the more penetrating ultraviolet A1 (UVA1) (340–400 nm) wavelengths can be used because Irgacure 2959 only absorbs in the UV (100–400 nm) region. We questioned if the L929 mouse fibroblast cells used in the American Society for Testing Materials standard cytotoxicity assays (F895&F813) can predict the viability of hMSC after exposure to UVA1 radiation alone and in combination with Irgacure 2959 (0.05–0.5% w/v usual range). We exposed both cell types to a high dose of LED UVA1 (370 ± 5 nm; 788 kJ m^?2) and side by side to increasing UVA1 doses from a glass‐filtered black light source combined with either 0.05% (w/v) or 0.5% (w/v) of Irgacure 2959 and monitored their viabilities using flow cytometry. We found UVA1 radiation alone killed ~50% of the hMSC cells compared to ~8% of the L929 cells and significantly more hMSC than L929 died after UVA1 with Irgacure 2959. Thus, L929 cannot be used to accurately predict the viability of hMSC after these specific 3D bioprinting conditions.     

Swelling and drug release properties of acrylamide/carboxymethyl cellulose networks formed by gamma irradiation

Hydrogels based on acrylamide monomer (AM) and different ratios (5–20 wt%) of carboxymethyl cellulose (CMC) were synthesized by gamma irradiation. The hydrogels were characterized in terms of gel content, swelling and drug release characters. The effect of temperature and pH on the degree of swelling was also studied. The results showed that the gel fraction of AM/CMC hydrogels decreases greatly with increasing the contents of CMC in the initial feeding solution. The kinetic study showed that the swelling of all the hydrogels tends to reach the equilibrium state after 5 h. However, the swelling of AM/CMC hydrogels was greater than the hydrogel based on pure AM. On the other hand, it was found that the swelling of all the hydrogels changes within the temperature range 30–40 °C and within the pH range 4–8. The AM/CMC hydrogels was evaluated for the possible use in drug delivery systems. In this respect, the release properties of methylene blue indicator, as a drug model, was investigated. It was found that the percentage release from the hydrogels increase with time to reach ～80% after 3 h at pH of 2 compared to ～100% at pH of 8.     

Chondroitin/polypyrrole nanocomposite hydrogels for the accurate release of 5-fluorouracil by electrical stimulation

The development of electro-stimulated drug release devices is an innovative approach to attain the drug delivery in accurate doses at target sites in a programmed manner. In this work, novel electroactive nanocomposite hydrogels were prepared by encapsulating green-synthesized polypyrrole (PPy) colloids within chondroitin sulfate (CS) networks during the self-crosslinking of CS via N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide chemistry. The structural and morphological properties of CS/PPy hydrogels were studied by Fourier-transformed infrared spectroscopy, scanning electron microscopy, and swelling kinetic measurements. The chemotherapeutic agent 5-fluorouracil (5-FU) was loaded into CS/PPy samples by hydrogel swelling method, or alternatively, by pre-incubating the drug in polymer mixture before crosslinking. Different electrical stimulations can be used to switch ON and accurately tune the 5-FU delivery from GG/PPy hydrogels. A single pulse potential of 5 V switched on the drug delivery up to 90% from nanocomposite hydrogel, in contrast to the low 5-FU amount released in a passive form (< 20%). PPy electroactive behavior played a determining role as the main driving force in 5-FU release activation. Cytotoxicity of hydrogels with and without 5-FU was examined in normal and cancer cells. Considering the high cytotoxicity of 5-FU, the ON/OFF 5-FU release patterns evidenced the potential of CS/PPy hydrogels for electrically controlled drug delivery in implantable or transdermal drug release devices.     

Developing a Novel Platelet-Rich Plasma-Laden Bioadhesive Hydrogel Contact Lens for the Treatment of Ocular Surface Chemical Injuries

Permanent injury to corneal limbal stem cells after ocular surface chemical and thermal injuries is a major cause of corneal blindness. In this study, a PRP-laden GelMA hydrogel contact lens is manufactured which is aimed to support the limbal niche after ocular surface insults thereby preventing limbal stem cell failure. GelMA with varying platelet-rich plasma (PRP) concentrations (5%, 10%, and 20%) is photopolymerized using a visible light crosslinking system followed by characterizations of mechanical properties, growth factor release, enzymatic degradation, and in vitro cytotoxicity. The addition of 10% PRP into 10% GelMA hydrogel precursor solution results in the highest tensile and compressive modulus (38 and 110 kPa, respectively) and burst pressure (251±37.66 mmHg). Degradation time varies according to the concentration of the collagenase enzyme tested (0, 2.5, 5, and 40 µg/mL) and is most prolonged with 20% PRP. EGF and TGF-β release profiles suggest an initial burst release followed by sustained release, most consistent in the 10% PRP sample. Although cell viability decreases on day 1, rapid recovery is observed and is approximately 120% after day 21. PRP-laden GelMA in the form of a contact lens may be a promising biomaterial-based treatment approach for the maintenance of limbal epithelial stem cells after ocular surface insults.     

Protein release from interpenetrating polymer network hydrogels triggered by endogenous biomarkers

A biocompatible drug delivery system with a high-sensitive stimuli-responsive behavior is reported. Calcium alginate hydrogels interpenetrated with polyvinyl alcohol–diboronate polymer network (IPN) effectively respond to the presence of hydrogen peroxide through oxidative degradation of boronate esters. The degradation of the IPN entails the reopening of the original alginate pores, resulting in a 5–9 times increase in release rates of encapsulated proteins with molecular masses ranging from 16.7 to 66 kDa. The release can be triggered by hydrogen peroxide concentrations as low as 50 μM in the bulk solution. Alternatively, hydrogen peroxide can also be generated inside the hydrogels by incorporation of oxidase enzymes in the presence of their substrates, such as lactate, glucose, or hypoxanthine, which can serve as biomarkers of certain physiological disorders.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

Influence of hydration and crosslinking in transdermal delivery of nicotine from chitosan-based gels by thermal analysis

Chitosan is a biopolymer that forms hydrogels after swell in acid medium. The environment of the three-dimensional network of the chitosan-based hydrogels can be modified by its degree of swelling and crosslinking. In this way, nicotine was incorporated in the hydrogel formulations, with or without crosslinking with glutaraldehyde (0.01%), in different swollen states. Transdermal delivery of nicotine by chitosan-based hydrogels was studied in order to achieve the prolonged administration of the drug. Thermal analysis indicated a preliminary stability of these formulations, and the mechanism of drug release from hydrogels was dependent of the swelling degree and crosslinking. These formulations were able to control the transdermal flux of nicotine for up to 48 h following zero-order kinetics. The hydrogels with higher amounts of water or the partially dried crosslinked hydrogels reduced the partition of nicotine into the skin, leading to a minor transdermal flux of the drug (<3.4 µg cm⁻² h⁻¹). On the other hand, the partially dried non-crosslinked hydrogels lead to a major transdermal flux of the drug (20.19 µg cm⁻² h⁻¹) due to modifications of the environment into the hydrogel. In this way, these transdermal formulations were promising vehicles for prolonged administration of nicotine.

     

Swelling and thermodynamic studies of temperature responsive 2-hydroxyethyl methacrylate/itaconic acid copolymeric hydrogels prepared via gamma radiation

The copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were synthesized by gamma radiation induced radical polymerization. Swelling and thermodynamic properties of PHEMA and copolymeric P(HEMA/IA) hydrogels with different IA contents (2, 3.5 and 5 mol%) were studied in a wide pH and temperature range. Initial studies of so-prepared hydrogels show interesting pH and temperature sensitivity in swelling and drug release behavior. Special attention was devoted to temperature investigations around physiological temperature (37 °C), where small changes in temperature significantly influence swelling and drug release of these hydrogels. Due to maximum swelling of hydrogels around 40 °C, the P(HEMA/IA) hydrogel containing 5 mol% of IA without and with drug-antibiotic (gentamicin) were investigated at pH 7.40 and in the temperature range 25–42 °C, in order to evaluate their potential for medical applications.     

Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.     

静电纺丝法制备PBS纳米纤维膜及缓释血小板内生长因子的PBS纳米纤维膜的生物活性评价

利用静电纺丝法制备了聚丁二酸丁二醇酯(PBS)纳米纤维膜及PBS和富血小板血浆(PRP)的混合纳米纤维膜. 通过扫描电子显微镜、 3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐(MTT)比色法、 支架表面细胞荧光染色法、 材料溶血行为及Elisa法检测体外释放综合评价了支架材料的性能及生物活性. 结果表明, 纳米纤维膜对人骨肉瘤细胞系MG63细胞增殖具有促进作用; 生长因子在最初的突释后, 随材料降解而缓释; 支架材料溶血率为0.1475%(<5%), 符合医用材料的溶血实验要求.     

Impact of supramolecular interactions on swelling and release behavior of UPy functionalized HEMA‐based hydrogels

Supramolecular polymeric hydrogels based on copolymers of 2‐hydroxyethyl methacrylate (HEMA) and HEMA functionalized with ureidopyrimidinone (quadruple H‐bonding motifs and HU comonomer) were prepared at different HU comonomer ratios (PH‐Sn, n = HU mol%). For comparison, HEMA homopolymers (PH‐Cn, n = mol% of a chemical cross‐linker) were synthesized. In contrast to PH‐S0, PH‐Sn copolymers act like cross‐linked hydrogels and absorb large amounts of water while retaining shape. Viscosities of the hydrogels decreased, and elastic and loss moduli increased with increasing HU content. Compression modulus of the swollen PH‐Sn hydrogels increased with HU content and varied between 54 and 240 kPa. Study of metronidazole loading/release behaviors of PH‐S6 hydrogel against PH‐C6 revealed a negligible burst effect for the former and a sustained release that continued for about 120 hours. We conclude that modification of poly(2‐hydroxyethyl methacrylate) with HU through urethane linkages is an effective strategy to developing physical hydrogels with predictable behavior for biomedical applications.     

γ-irradiated chitosan-polyvinyl pyrrolidone hydrogels as pH-sensitive protein delivery system

The effects of pH of the buffer solution and the composition of the hydrogel system on the bovine serum albumin (BSA) adsorption capacity of chitosan (CS)–polyvinyl pyrrolidone (PVP) (CSPVP) hydrogels and release of BSA were investigated. Poly-electrolyte CSPVP hydrogels with different compositions were prepared by irradiating CS/PVP/water mixtures with γ-rays at ambient temperature. The adsorption capacity of hydrogels was found to increase from 0 to 350 mg BSA/g dry gel, by changing external stimuli and hydrogel composition. The adsorption of BSA within CSPVP hydrogels increased with increase in CS content in the hydrogels. When the irradiation doses of hydrogel increased, the adsorption of BSA decreased. The maximum adsorption of BSA was observed at pH 5. A significant amount of the adsorbed BSA (up to 95%) was eluted in the phosphate medium containing 0.1 M NaCl at pH 7.4.     

Conformation transition of silk fibroin induced by blending chitosan

The conformation of silk fibroin in silk fibroin/chitosan (SF/CS) blend membrane was analyzed by infrared spectrum, X-ray diffractometry, and Raman spectrum. The results demonstrated that the SF could show β-sheet conformation when the SF content in blend membranes was 10% (w/w) and 60–80% (w/w), while the pure SF membrane showed random coil conformation. A mechanism of the conformation transition was suggested in that the SF chain could use the rigid CS chain as a mold plate to stretch itself to form a β-sheet structure according to the strong hydrogen bond between CS and SF. Therefore, a new concept, named “Polymer-Induced Conformation Transition,” was proposed. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2293–2296, 1997     

Preparation and characterization of macroporous poly(N‐isopropylacrylamide) hydrogels for the controlled release of proteins

Macroporous, temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels were synthesized with poly(ethylene glycol)s (PEGs; molecular weight = 2000–6000) as the pore‐forming agents. The influence of the molecular weight and PEG content on the responsive kinetics of these macroporous hydrogels was investigated. The PEG‐modified PNIPAAm hydrogels were characterized by the swelling ratio, deswelling–reswelling kinetics, Fourier transform infrared, and differential scanning calorimetry. The morphology of these hydrogels was analyzed with scanning electron microscopy. The prepared macroporous hydrogels exhibited some unique properties in comparison with the gels with low molecular weight PEGs (molecular weight < 2000) as the pore‐forming agents. In addition, a preliminary study on the controlled release of bovine serum albumin from these macroporous hydrogels was carried out. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 152–159, 2003     

An Injectable Integration of Autologous Bioactive Concentrated Growth Factor and Gelatin Methacrylate Hydrogel with Efficient Growth Factor Release and 3D Spatial Structure for Accelerated Wound Healing

Growth factors are essential for wound healing owing to their multiple reparative effects. Concentrated growth factor (CGF) is a third-generation platelet extract containing various endogenous growth factors. Herein, a CGF extract solution is combined with gelatin methacrylate (GM) by physical blending to produce GM@CGF hydrogels for wound repair. The GM@CGF hydrogels show no immune rejection during autologous transplantation. Compared to CGF, GM@CGF hydrogels not only exhibit excellent plasticity and adhesivity but also prevent rapid release and degradation of growth factors. The GM@CGF hydrogels display good injectability, self-healing, swelling, and degradability along with outstanding cytocompatibility, angiogenic functions, chemotactic functions, and cell migration-promoting capabilities in vitro. The GM@CGF hydrogel can release various effective molecules to rapidly initiate wound repair, stimulate the expressions of type I collagen, transform growth factor β1, epidermal growth factor, and vascular endothelial growth factor, promote the production of granulation tissues, vascular regeneration and reconstruction, collagen deposition, and epidermal cell migration, as well as prevent excessive scar formation. In conclusion, the injectable GM@CGF hydrogel can release various growth factors and provide a 3D spatial structure to accelerate wound repair, thereby providing a foundation for the clinical application and translation of CGF.     

In vitro and in vivo evaluation of silk fibroin-hardystonite-gentamicin nanofibrous scaffold for tissue engineering applications

Designing advanced biomaterials with regenerative and drug delivering functionalities remains a challenge in the field of tissue engineering. In this paper we present the design, development, and a use case of an electrospun nano-biocomposite scaffold composed of silk fibroin (SF), hardystonite (HT), and gentamicin (GEN). The fabricated SF nanofiber scaffolds provide mechanical support while HT acts as a bioactive and drug carrier, on which GEN is loaded as an antibacterial agent. Antibacterial zone of inhibition (ZOI) results indicate that the inclusion of 3–6 wt% GEN significantly improves the antibacterial performance of the scaffolds against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) bacteria, with an initial burst release of 10–20% and 72–85% total release over 7 days. The release rate of stimulatory silicon ions from SF-HT scaffolds reached 94.53±5 ppm after 7 days. Cell studies using osteoblasts show that the addition of HT significantly improved the cytocompatibility of the scaffolds. Angiogenesis, in vivo biocompatibility, tissue vascularization, and translatability of the scaffolds were studied via subcutaneous implantation in a rodent model over 4-weeks. When implanted subcutaneously, the GEN-loaded scaffold promoted angiogenesis and collagen formation, which suggests that the scaffold may be highly beneficial for further bone tissue engineering applications.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

Development and validation of an LC–MS/MS method for simultaneous determination of remdesivir and its hydrolyzed metabolite and nucleoside,and its application in a pharmacokinetic study of normal and diabetic nephropathy mice

Remdesivir (RDV), a phosphoramidate prodrug, has broad-spectrum antiviral activity. It is the first antiviral drug approved by the US Food and Drug Administration (FDA) for the treatment of COVID-19. Remdesivir is rapidly metabolized in the body to produce derivatives: alanine metabolite (RM-442) and RDV C-nucleoside (RN). Here, the phosphatase inhibitor PhosSTOP and carboxylesterase inhibitor 5,5′-dithiobis-2-nitrobenzoic acid were used to improve stability of RDV in mouse blood. We developed a rapid and sensitive LC–MS/MS method to simultaneously quantify RDV, RM-442 and RN in mouse blood. Chromatographic separation was achieved by gradient elution on an Acquity HSS T₃ column. The run time was 3.2 min. The linearity ranges of the analytes were 0.5–1,000 ng/ml for RDV and 5–10,000 ng/ml for both RM-442 and RN. The method had an acceptable precision (RSD < 8.4% for RDV, RSD < 10.7% for RM-442 and RSD < 7.2% for RN) and accuracy (91.0–106.3% for RDV, 92.5–98.6% for RM-442 and 87.5–98.4% for RN). This method was successfully applied to analyze RDV, RM-442 and RN in the blood of normal and diabetic nephropathy DBA/2 J mice after intravenous injection of RDV at 20 mg/kg. The area under the concentration–time curve of RN between the normal and diabetic nephropathy mice showed a significant difference (P < 0.01).     

Effect of beta-sheet crystals on the thermal and rheological behavior of protein-based hydrogels derived from gelatin and silk fibroin

Novel protein-based hydrogels have been prepared by blending gelatin (G) with amorphous Bombyx mori silk fibroin (SF) and subsequently promoting the formation of beta-sheet crystals in SF upon exposure to methanol or methanol/water solutions. Differential scanning calorimetry of the resultant hydrogels confirms the presence and thermoreversibility of the G helix-coil transition between ambient and body temperature at high G concentrations. At low G concentrations, this transition is shifted to higher temperatures and becomes progressively less pronounced. Complementary dynamic rheological measurements reveal solid-liquid cross-over at the G helix-coil transition temperature typically between 30 and 36 degrees C in blends prior to the formation of beta-sheet crystals. Introducing the beta-sheet conformation in SF stabilizes the hydrogel network and extends the solid-like behavior of the hydrogels to elevated temperatures beyond body temperature with as little as 10 wt.-% SF. The temperature-dependent elastic modulus across the G helix-coil transition is reversible, indicating that the conformational change in G can be used in stabilized G/SF hydrogels to induce thermally triggered encapsulant release.     

Synthesis and properties of biodegradable thermo- and pH-sensitive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

Thermo- and pH-sensitive hydrogels were synthesized via the copolymerization of N-isopropylacrylamide (NIPAAm) and methacrylic acid (MAA) crosslinked with a biodegradable PEG-co-PCL macromolecular crosslinker under UV irradiation. Swelling measurements showed that temperature and pH sensitivity of the resultant hydrogels were highly dependent on the composition of the hydrogels as well as temperature and pH of the local medium. The pH and temperature dependence of the hydrogels displayed good reversibility. The hydrolytic degradation studies showed that the degradation rate of the hydrogels increased with the increasing content of MAA introduced in the hydrogels in pH 7.4 PBS solutions at 37 °C. The study on the release of BSA indicated that the release rate of BSA was higher at pH 7.4 than at pH 2.0, and increased with the increase of the MAA content in the hydrogels in pH 7.4 PBS solutions at 37 °C. These hydrogel materials are desirable for potential applications as smart drug delivery systems.