Preparation of non-contact ordered array of polystyrene colloidal particles by using a metallic thin film of fused hemispheres

A thin metallic bilayer consists of fused hollow hemispheres of 930 nm in diameter is fabricated by sputter deposition of Ti and Fe at 50 and 5 nm of thickness, respectively, onto an array of spherical polystyrene colloidal particles. The fused metal hemispheres are utilized to assemble polystyrene colloidal particles of smaller diameters (800 nm) into non-contact two-dimensional periodic array by trapping them in the metallic wells.     

Formation and diffusivity characterization of supported lipid bilayers with complex lipid compositions

The moving edge of a hydrodynamically manipulated supported lipid bilayer (SLB) can be used to catalyze SLB formation of adsorbed lipid vesicles that do not undergo spontaneous SLB formation upon adsorption on SiO(2). By removing the lipid reservoir of an initially formed SLB, we show how a hydrodynamically moved SLB patch composed of POPC can be used to form isolated SLBs with compositions that to at least 95% represent that of the adsorbed lipid vesicles. The concept is used to investigate the diffusivity of lissamine rhodamine B 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (rhodamine-DHPE) in SLBs made from complex lipid compositions, revealing a decrease in diffusivity by a factor of 2 when the cholesterol content was increased from 0% to 50%. We also demonstrate how the concept can be used to induce stationary domains in SLBs containing 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), and cholesterol (39:21:40 mol %, respectively). Because the method serves as a means to form SLBs with lipid compositions that hamper SLB formation via spontaneous rupture of adsorbed lipid vesicles, it opens up the possibility for new biophysical investigations of SLBs with more nativelike compositions.     

Supported lipid bilayer nanosystems: stabilization by undulatory-protrusion forces and destabilization by lipid bridging

Control of the stabilization/destabilization of supported lipid bilayers (SLBs) on nanoparticles is important for promotion of their organized assembly and for their use as delivery vehicles. At the same time, understanding the mechanism of these processes can yield insight into nanoparticle-cell interactions and nanoparticle toxicity. In this study, the suspension/precipitation process of zwitterionic lipid/SiO(2) nanosystems was analyzed as a function of ionic strength and as a function of the ratio of lipid/SiO(2) surface areas, at pH = 7.6. Salt is necessary to induce supported lipid bilayer (SLB) formation for zwitterionic lipids on silica (SiO(2)) (Seantier, B.; Kasemo, B., Influence of Mono- and Divalent Ions on the Formation of Supported Phospholipid Bilayers via Vesicle Adsorption. Langmuir 2009, 25 (10), 5767-5772). However, for zwitterionic SLBs on SiO(2) nanoparticles, addition of salt can cause precipitation of the SLBs, due to electrostatic shielding by both the lipid and the salt and to the suppression of thermal undulation/protrusion repulsive forces for lipids on solid surfaces. At ionic strengths that cause precipitation of SLBs, it was found that addition of excess SUVs, at ratios where there were equal populations of SUVs and SLBs, restored the undulation/protrusion repulsive forces and restabilized the suspensions. We suggest that SUVs separate SLBs in the suspension, as observed by TEM, and that SLB-SLB interactions are replaced by SLB-SUV interactions. Decreasing the relative amount of lipid, to the extent that there was less lipid available than the amount required for complete bilayer coverage of the SiO(2), resulted in precipitation of the nanosystem by a process of nanoparticle lipid bridging. For this case, we postulate a process in which lipid bilayer patches on one nanoparticle collide with bare silica patches on another SiO(2) nanoparticle, forming a single bilayer bridge between them. TEM data confirmed these findings, thus indicating that lipid bridges are composed of half bilayers on adjoining SiO(2) nanoparticles.     

Microcontact printing for creation of patterned lipid bilayers on tetraethylene glycol self-assembled monolayers

Supported lipid bilayers (SLBs) formed on many different substrates have been widely used in the study of lipid bilayers. However, most SLBs suffer from inhomogeneities due to interactions between the lipid bilayer and the substrate. In order to avoid this problem, we have used microcontact printing to create patterned SLBs on top of ethylene-glycol-terminated self-assembled monolayers (SAMs). Glycol-terminated SAMs have previously been shown to resist absorbance of biomolecules including lipid vesicles. In our system, patterned lipid bilayer regions are separated by lipid monolayers, which form over the patterned hexadecanethiol portions of the surface. Furthermore, we demonstrate that α-hemolysin, a large transmembrane protein, inserts preferentially into the lipid bilayer regions of the substrate.     

Atomic force microscopy of model lipid membranes

Supported lipid bilayers (SLBs) are biomimetic model systems that are now widely used to address the biophysical and biochemical properties of biological membranes. Two main methods are usually employed to form SLBs: the transfer of two successive monolayers by Langmuir–Blodgett or Langmuir–Schaefer techniques, and the fusion of preformed lipid vesicles. The transfer of lipid films on flat solid substrates offers the possibility to apply a wide range of surface analytical techniques that are very sensitive. Among them, atomic force microscopy (AFM) has opened new opportunities for determining the nanoscale organization of SLBs under physiological conditions. In this review, we first focus on the different protocols generally employed to prepare SLBs. Then, we describe AFM studies on the nanoscale lateral organization and mechanical properties of SLBs. Lastly, we survey recent developments in the AFM monitoring of bilayer alteration, remodeling, or digestion, by incubation with exogenous agents such as drugs, proteins, peptides, and nanoparticles.

Soft lithographic patterning of supported lipid bilayers onto a surface and inside microfluidic channels

We present simple soft lithographic methods for patterning supported lipid bilayer (SLB) membranes onto a surface and inside microfluidic channels. Micropatterns of polyethylene glycol (PEG)-based polymers were fabricated on glass substrates by microcontact printing or capillary moulding. The patterned PEG surfaces have shown 97 +/- 0.5% reduction in lipid adsorption onto two dimensional surfaces and 95 +/- 1.2% reduction inside microfluidic channels in comparison to glass control. Atomic force microscopy measurements indicated that the deposition of lipid vesicles led to the formation of SLB membranes by vesicle fusion due to hydrophilic interactions with the exposed substrate. Furthermore, the functionality of the patterned SLBs was tested by measuring the binding interactions between biotin (ligand)-labeled lipid bilayer and streptavidin (receptor). SLB arrays were fabricated with spatial resolution down to approximately 500 nm on flat substrate and approximately 1 microm inside microfluidic channels, respectively.     

Dual polarization interferometric and capillary electrophoretic analysis of supported lipid bilayer constructed on silica-based surface: Evaluation of its anti-protein adsorption effect

Supported lipid bilayer (SLB) has been demonstrated as a model of cell membranes with prospective bioanalytical or biotechnological applications. In this study, the formation of SLB and their potential biofunctionality against protein adsorption were investigated by Dual Polarization Interferometry (DPI) and Capillary Electrophoresis (CE). DPI studies on different formulations of double-chained, zwitterionic phospholipidlipids, allow the process of bilayer formation to be followed in situ and in real time. Furthermore the anti-protein adsorption effect provided by the various formulated SLBs was examined by DPI. In addition, the SLB coatings of the same lipid formulations were subsequently employed in CE experiments as a pseudo-stationary phase for demonstrating more efficient separation of alkaline protein standard mixtures. SLB-assisted CE was found to be capable of separating 4 alkaline proteins (protonated at neutral pH). This study demonstrates the applicability of DPI to monitor the process of SLB formation; and our findings, obtained by both DPI and CE, confirm that the presence of the SLB reduced drastically the problematic interactions between cationic, alkaline proteins and the negatively charged silica capillary wall, leading to better recovery and efficient separation of the proteins under investigation.     

Disruption of supported lipid bilayers by semihydrophobic nanoparticles

Understanding the interaction between functional nanoparticles and cell membranes is critical to use nanomaterials for broad biomedical applications with minimal cytotoxicity. In this work, we have investigated the effect of adsorbed semihydrophobic nanoparticles (NPs) on the dynamics and morphology of model cell membranes. We have systematically varied the degree of surface hydrophobicity of carboxyl end-functionalized polystyrene NPs of varied size in buffer solutions with varied ionic strength. It is observed that semihydrophobic NPs can readily adsorb on neutral SLBs and drag lipids from SLBs to NP surfaces. Above a critical NP concentration, the disruption of SLBs is observed, accompanied with the formation and rapid growth of lipid-poor regions on NP-adsorbed SLBs. In the study of the effect of solution ionic strength on NP surface hydrophobic degree and the growth of lipid-poor regions, we have concluded that the hydrophobic interaction enhanced by screened electrostatic interaction underlies the envelopment of NPs by lipids that are attracted from SLBs to the surface of NPs or their aggregates. Hence, the formation and growth of lipid-poor regions, or vaguely referred as "pores" or "holes" in the literature, can be controlled by NP concentration, size, and surface hydrophobicity, which is critical to design functional nanomaterials for effective nanomedicine while minimizing possible cytotoxicity.     

Supported lipid bilayer self-spreading on a nanostructured silicon surface

We report on the self-spreading behavior of a supported lipid bilayer (SLB) on a silicon surface with various 100 nm nanostructures. SLBs have been successfully grown from a small spot of a lipid molecule source both on a flat surface and uneven surfaces with 100 nm up-and-down nanostructures. After an hour, the self-spreading SLB forms a large circle or an ellipse depending on the nanostructure pattern. The results are explained by a model that shows that a single-layer SLB grows along the nanostructured surfaces. The model is further supported by a quantitative analyses of our data. We also discuss the stability of the SLB on nanostructured surfaces in terms of the balance between its bending and adhesion energies.     

Double cushions preserve transmembrane protein mobility in supported bilayer systems

Supported lipid bilayers (SLBs) have been widely used as model systems to study cell membrane processes because they preserve the same 2D membrane fluidity found in living cells. One of the most significant limitations of this platform, however, is its inability to incorporate mobile transmembrane species. It is often postulated that transmembrane proteins reconstituted in SLBs lose their mobility because of direct interactions between the protein and the underlying substrate. Herein, we demonstrate a highly mobile fraction for a transmembrane protein, annexin V. Our strategy involves supporting the lipid bilayer on a double cushion, where we not only create a large space to accommodate the transmembrane portion of the macromolecule but also passivate the underlying substrate to reduce nonspecific protein-substrate interactions. The thickness of the confined water layer can be tuned by fusing vesicles containing polyethyleneglycol (PEG)-conjugated lipids of various molecular weights to a glass substrate that has first been passivated with a sacrificial layer of bovine serum albumin (BSA). The 2D fluidity of these systems was characterized by fluorescence recovery after photobleaching (FRAP) measurements. Uniform, mobile phospholipid bilayers with lipid diffusion coefficients of around 3 x 10(-8) cm2/s and percent mobile fractions of over 95% were obtained. Moreover, we obtained annexin V diffusion coefficients that were also around 3 x 10(-8) cm2/s with mobile fractions of up to 75%. This represents a significant improvement over bilayer platforms fabricated directly on glass or using single cushion strategies.     

Formation of arenicin-1 microdomains in bilayers and their specific lipid interaction revealed by Z-scan FCS

Z-scan fluorescence correlation spectroscopy (FCS) is employed to characterize the interaction between arenicin-1 and supported lipid bilayers (SLBs) of different compositions. Lipid analogue C8-BODIPY 500/510C5-HPC and ATTO 465 labelled arenicin-1 are used to detect changes in lipid and peptide diffusion upon addition of unlabelled arenicin-1 to SLBs. Arenicin-1 decreases lipid mobility in negatively charged SLBs. According to diffusion law analysis, microdomains of significantly lower lipid mobility are formed. The analysis of peptide FCS data confirms the presence of microdomains for anionic SLBs. No indications of microdomain formation are detected in SLBs composed purely of zwitterionic lipids. Additionally, our FCS results imply that arenicin-1 exists in the form of oligomers and/or aggregates when interacting with membranes of both compositions.     

Formation of pH‐Resistant Monodispersed Polymer–Lipid Nanodiscs

Polymer lipid nanodiscs are an invaluable system for structural and functional studies of membrane proteins in their near‐native environment. Despite the recent advances in the development and usage of polymer lipid nanodisc systems, lack of control over size and poor tolerance to pH and divalent metal ions are major limitations for further applications. A facile modification of a low‐molecular‐weight styrene maleic acid copolymer is demonstrated to form monodispersed lipid bilayer nanodiscs that show ultra‐stability towards divalent metal ion concentration over a pH range of 2.5 to 10. The macro‐nanodiscs (>20 nm diameter) show magnetic alignment properties that can be exploited for high‐resolution structural studies of membrane proteins and amyloid proteins using solid‐state NMR techniques. The new polymer, SMA‐QA, nanodisc is a robust membrane mimetic tool that offers significant advantages over currently reported nanodisc systems.     

Kinetic control of histidine-tagged protein surface density on supported lipid bilayers

Nickel-chelating lipids are general tools for anchoring polyhistidine-tagged proteins to supported lipid bilayers (SLBs), but controversy exists over the stability of the protein-lipid attachment. Here, we show that chelator lipids are suitable anchors for building stable, biologically active surfaces but that a simple Langmuirian model is insufficient to describe their behavior. Desorption kinetics from chelator lipids are governed by the valency of surface binding: monovalently bound proteins desorb within minutes (t1/2 approximately 6 min), whereas polyvalently bound species remain bound for hours (t1/2 approximately 12 h). Evolution between surface states is slow, so equilibrium is unlikely to be reached on experimental timescales. However, by tuning incubation conditions, the populations of each species can be kinetically controlled, providing a wide range of protein densities on SLBs with a single concentration of chelator lipid. We propose guidelines for the assembly of SLB surfaces functionalized with specific protein densities and demonstrate their utility in the formation of hybrid immunological synapses.     

On the effect of the solid support on the interleaflet distribution of lipids in supported lipid bilayers

The adsorption and spreading of lipid vesicles on solid supports has become a popular way to create supported lipid bilayers (SLBs), but little attention has been paid to the possible redistribution of lipid material between the two leaflets of an SLB. We use the technique of quartz crystal microbalance with dissipation monitoring (QCM-D) to follow the adsorption of prothrombin on SLBs formed from sonicated unilamellar vesicles containing mixtures of dioleoylphosphatidylcholine (DOPC) and dioleoylphospatidylserine (DOPS). The specific interaction of prothrombin with negatively charged lipids is quantified and serves as a reporter of the content of accessible DOPS in SLBs. We compare results obtained on silica and mica and find that the underlying support can induce substantial redistribution of lipid material between the two leaflets. In particular, SLBs formed on mica showed a substantially depleted amount of accessible DOPS in the presence of calcium. The mechanisms that lead to the lipid redistribution process are discussed.     

Model cell membranes: Techniques to form complex biomimetic supported lipid bilayers via vesicle fusion

Vesicle fusion has long provided an easy and reliable method to form supported lipid bilayers (SLBs) from simple, zwitterionic vesicles on siliceous substrates. However, for complex compositions, such as vesicles with high cholesterol content and multiple lipid types, the energy barrier for the vesicle-to-bilayer transition is increased or the required vesicle–vesicle and vesicle–substrate interactions are insufficient for vesicle fusion. Thus, for vesicle compositions that more accurately mimic native membranes, vesicle fusion often fails to form SLBs. In this paper, we review three approaches to overcome these barriers to form complex, biomimetic SLBs via vesicle fusion: (i) optimization of experimental conditions (e.g., temperature, buffer ionic strength, osmotic stress, cation valency, and buffer pH), (ii) α-helical (AH) peptide-induced vesicle fusion, and (iii) bilayer edge-induced vesicle fusion. AH peptide-induced vesicle fusion can form complex SLBs on multiple substrate types without the use of additional equipment. Bilayer edge-induced vesicle fusion uses microfluidics to form SLBs from vesicles with complex composition, including vesicles derived from native cell membranes. Collectively, this review introduces vesicle fusion techniques that can be generalized for many biomimetic vesicle compositions and many substrate types, and thus will aid efforts to reliably create complex SLB platforms on a range of substrates.     

Cationic gel-phase liposomes with "decorated" anionic SPIO nanoparticles: morphology, colloidal, and bilayer properties

The assembly and complexation of oppositely charged colloids are important phenomena in many natural and synthetic processes. Liposome-nanoparticle assemblies (LNAs) represent an interesting hybrid system that combines "soft" and "hard" colloidal materials. This work describes the formation and characterization of gel-phase LNAs formed by the binding of anionic superparamagnetic iron oxide (SPIO) nanoparticles to cationic dipalmitoylphosphatidylcholine (DPPC)/dipalmitoyltrimethylammonium propane (DPTAP) liposomes. Particles were examined with hydrodynamic diameters below (16 nm) and above (30 nm) the cutoff reported for supported lipid bilayer formation. LNA formation with 16 nm particles was entropically driven and particles bound individually to yield "decorated" structures. In this case, increasing nanoparticle concentration yielded colloidal LNA aggregates and eventual charge inversion. In contrast, LNA formation with 30 nm particles was enthalpically driven, and the nanoparticles aggregated at the bilayer interface. These aggregates led to significant LNA aggregation and large bilayer sheets due to liposome rupture despite minimal charge screening of the liposome surface. In this case SLBs were present, but these structures were not dominant. Differences in LNA structure were also revealed through the lipid phase transition behavior. This work infers size-dependent nanoparticle binding and LNA formation mechanisms that can be used to tailor colloidal and bilayer properties. Analogies are made to polyelectrolyte patch charge heterogeneities and DNA complexation with cationic liposomes.     

Sub-100 nm patterning of supported bilayers by nanoshaving lithography

Sub-100 nm wide supported phospholipid bilayers (SLBs) were patterned on a planar borosilicate substrate by AFM-based nanoshaving lithography. First, a bovine serum albumin monolayer was coated on the glass and then selectively removed in long strips by an AFM tip. The width of vacant strips could be controlled down to 15 nm. Bilayer lines could be formed within the vacant strips by vesicle fusion. It was found that stable bilayers formed by this method had a lower size limit of approximately 55 nm in width. This size limit stems from a balance between a favorable bilayer adhesion energy and an unfavorable bilayer edge energy.     

Supported lipid bilayer microarrays created by non-contact printing

Arrays of supported lipid bilayers (SLBs) provide great potential for future drug development and multiplexed biological research, but are difficult to prepare due to the sensitivity of both the lipid and protein structural arrangement to air exposure. A novel way to produce arrays of SLBs is presented based on non-contact dispensing of vesicles to a substrate through a thin surface confined water film. The approach presents many degrees of freedom since it is not limited to a specific substrate, lipid composition, linker or controlled environment. The method allows adjustment of spot size (180-360 μm) by repeated dispensing as well as control over the composition of the spots and subsequent analytes. SLB formation by vesicle adsorption and rupture allows for incorporation of membrane proteins through pre-formed proteoliposomes. Dispensing through a dip-and-rinse water film avoids contamination, disruptive drying and the need for complex buffer compositions. Furthermore, no humidity control is necessary which simplifies the production step and prolongs the life-time of the spotting system. We characterize the method with respect to control over spot size, bilayer mobility and the formation process as well as demonstrate the possibility to fuse bilayer spots with subsequently added vesicles. Since complex lipid compositions and multiple spotting nozzles can be used, this novel technique is expected to be a promising platform for future applications, e.g. patterning to monitor peptide/protein-lipid interactions, for glycomics using glycolipids or lipopolysaccharides, and to study mixing of spatially confined lipid membranes.     

Supported lipid bilayer formation by the giant vesicle fusion induced by vesicle–surface electrostatic attractive interaction

The effect of the electrostatic attractive force between giant unilamellar vesicles (GUVs) and the SiO₂ surface on the formation of a Ca²⁺-free supported lipid bilayer (SLB) was investigated by atomic force microscopy and fluorescence microscopy. When negatively charged GUVs were incubated for 1 h without Ca²⁺, the surface coverage of lipid bilayer was <1% on the SiO₂ surface. In contrast, a high coverage was obtained without addition of Ca²⁺ on the positively charged surface modified by aminopropyldimethylethoxysilane, and the coverage of SLBs decreased with increasing KCl concentrations. The thickness of the water layer under SLB was reduced by modification of APS.     

Bioinspired,Size‐Tunable Self‐Assembly of Polymer–Lipid Bilayer Nanodiscs

Polymer‐based nanodiscs are valuable tools in biomedical research that can offer a detergent‐free solubilization of membrane proteins maintaining their native lipid environment. Herein, we introduce a novel ca. 1.6 kDa SMA‐based polymer with styrene:maleic acid moieties that can form nanodiscs containing a planar lipid bilayer which are useful to reconstitute membrane proteins for structural and functional studies. The physicochemical properties and the mechanism of formation of polymer‐based nanodiscs are characterized by light scattering, NMR, FT‐IR, and TEM. A remarkable feature is that nanodiscs of different sizes, from nanometer to sub‐micrometer diameter, can be produced by varying the lipid‐to‐polymer ratio. The small‐size nanodiscs (up to ca. 30 nm diameter) can be used for solution NMR spectroscopy studies whereas the magnetic‐alignment of macro‐nanodiscs (diameter of > ca. 40 nm) can be exploited for solid‐state NMR studies on membrane proteins.