Synthesis of Carbonyl Compounds from Alcohols Using Electrochemically Generated Superoxide Ions in RTILs

Abstract

We show that the superoxide ion (O₂ ^??) generated electrochemically from oxygen dissolved in room-temperature ionic liquids (RTILs) reacts with primary and secondary alcohols to form the corresponding ketones and carboxylic acids, respectively. Specifically, we study the conversion of benzhydrol to benzophenone and benzyl alcohol to benzaldehyde/benzoic acid. The kinetics (e.g., rate, selectivity, and yield) for these reactions are also determined as functions of the variations in the structure of the ionic liquids. The RTILs used here are imidazolium-based cations where the functional groups on the imidazolium ring are modified. Specifically, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [bdmim][PF₆], and 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][PF₆] are used as the reaction medium. These results are compared to an ammonium-based RTIL (N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide). The results show that the nucleophilic attack by the O₂ ^?? of both the RTIL and the alcohol, especially that of the H atom at the R2 position of the [bmim][PF₆] and [hmim][PF₆], greatly affects the yields. No RTIL degradation products were detected for the reactions in [bdmim][PF₆] and N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. For the benzyl alcohol oxidation reaction in the RTIL, N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide, benzaldehyde formed did not undergo further oxidation to form benzoic acid, which may be due to the greater hydrophobicity of this RTIL. The competitive reaction kinetics between the alcohol and RTIL component must be considered in the selection of the RTIL solvent system.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

Understanding the interactions between tris(pentafluoroethyl)-trifluorophosphate-based ionic liquid and small molecules from molecular dynamics simulation

Tris(pentafluoroethyl)trifluorophosphate ([FEP])-based ionic liquids have been widely applied in many fields. For better understanding the properties of [FEP]-based ionic liquids, the interactions between 1-hexyl-3-methylimidazolium ([hmim])[FEP] and small molecules were investigated by molecular dynamics simulations in this work. The small molecules are water, methanol and dimethyl ether. The united-atom (UA) force fields were proposed for methanol and dimethyl ether based on AMBER force field. The densities, enthalpies of vaporization, excess molar properties, and diffusion coefficients of the mixtures were calculated, as well as the microscopic structures characterized by radial distribution functions. Both of the results of the excess energies and microscopic properties show that the strongest interaction is between [hmim][FEP] and dimethyl ether, whereas the interaction between [hmim][FEP] and water is the weakest. Moreover, [hmim][FEP] is more hydrophobic than [hmim] hexafluorophosphate ([PF6]), and the three solutes are mainly distributed around [FEP] anion.     

Effects of organic solvents and ionic liquids on the aminolysis of (RS)-methyl mandelate catalyzed by lipases

The enzymatic resolution of (RS)-methyl mandelate with n-butylamine using lipases in organic solvents (n-hexane, tert-butanol, and chloroform) and ionic liquids [BMIm][BF₄] and [BMIm][PF₆] is reported. The amide configuration is dependent on the organic solvent. When using mixtures of chloroform or tert-butanol/ionic liquids (10:1 v/v) with CAL-B as the catalyst, the amides were obtained in high enantiomeric excess (ee_p >99% and E >200).     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Catalytic olefin epoxidation with cyclopentadienyl-molybdenum complexes in room temperature ionic liquids

Complexes of the type (η⁵-C₅R₅)Mo(CO)₃X (X = Me, Cl; R = H, Me), being efficient homogeneous catalysts for the epoxidation of olefins, have been examined for their catalytic performance at 55 °C in systems containing room temperature ionic liquids (RTILs) of composition [BMIM]NTf₂, [BMIM]PF₆, [C₈MIM]PF₆ and [BMIM]BF₄. The catalytic performance for cyclooctene epoxidation depends strongly on the water content of the system, the catalyst solubility in the RTIL, and the reaction behaviour of the RTIL under the applied reaction conditions. The catalysts can be recycled without significant loss of activity when a reaction system containing [BMIM]NTf₂ and [BMIM]PF₆ in a 4:1 relationship is used. High proportions of [BMIM]PF₆ lead to a ring opening reaction (diol formation), due to HF formation and the presence of residual water.     

Catalytic enantioselective allylation of aldehydes via a chiral indium(III) complex in ionic liquids

The ionic liquid [hmim][PF₆] has been demonstrated as an efficient and environmentally-friendly reaction medium for the enantioselective allylation of aldehydes via a chiral indium(III) complex. The allylation of a variety of aromatic, α,β-unsaturated and aliphatic aldehydes resulted in moderate to good yields and enantioselectivities (upto 92% ee).     

Epoxidation in ionic liquids: A comparison of rhenium(VII) and molybdenum(VI) catalysts

Complexes of the type (dimethyl-bpy)MoO₂Cl₂ and Schiff/Lewis-base complexes of methyltrioxorhenium (MTO), being efficient homogeneous catalysts for the epoxidation of olefins, have been examined with respect to their catalytic performance at 55 and 25 °C in systems employing room temperature ionic liquids (RTILs) of composition [BMIM]NTf₂, [BMIM]PF₆, [BMIM]BF₄ and [C₈MIM]PF₆ as solvents. The performance in the cyclooctene epoxidation was observed to be strongly dependent on the water content of the system and the catalyst solubility in the RTIL. MTO based systems prove to be superior with respect to lower energy consumption, higher stability and higher product yields compared to the investigated Mo(VI) system under the conditions applied.     

Asymmetric whole cell biotransformations in biphasic ionic liquid/water-systems by use of recombinant Escherichia coli with intracellular cofactor regeneration

Ionic liquids such as [BMIM][PF₆] and [BMIM][NTF] are already known as good alternatives to organic solvents in biphasic biotransformation. Herein, we report about a systematic procedure based on physical properties to identify more commercially available ionic liquids exhibiting the potential to improve the efficiency of whole cell biocatalyses. This approach resulted in the identification of seven other water immiscible ionic liquids. These ionic liquids were rated by their biocompatibility, their substrate- and product-specific distribution coefficients and by for example performed asymmetric reductions of several prochiral ketones. With the use of a recombinant Escherichia coli as biocatalyst, overproducing a Lactobacillus brevis alcohol dehydrogenase and a Mycobacterium vaccae N10 formate dehydrogenase for cofactor regeneration, the great potential of asymmetric whole cell biotransformations in biphasic ionic liquid/water-systems were demonstrated in simple batch processes.     

酸性离子液体催化合成三吲哚甲烷化合物

在酸性离子液体催化下,通过吲哚及其衍生物和吲哚甲醛反应合成了一系列三吲哚甲烷化合物。[hmim]HSO₄/EtOH 对于该反应来说,是一个高效、绿色的催化体系。     

Epoxidation of olefins catalyzed by manganese(III) porphyrin in a room temperature ionic liquid

The epoxidation of several alkenes catalyzed by (meso-tetrakis(pentafluorophenyl)porphinato) manganese(III) chloride (MnTFPPCl) was carried out in a 3:1 [bmim]PF₆ ionic liquid/CH₂Cl₂ mixed solvent. The conversion and the yield of epoxide are excellent. It was also found that [bis(acetoxy)iodo]benzene [PhI(OAc)₂] is a more efficient oxidant than PhIO. The catalyst in the ionic liquids can be recycled for several runs without substantial diminution in the catalytic activity.     

Glaser oxidative coupling in ionic liquids: an improved synthesis of conjugated 1,3-diynes

Terminal alkynes undergo oxidative-coupling smoothly in the presence of the CuCl-TMEDA catalytic system in hydrophobic [bmim]PF₆ ionic liquid under aerobic conditions to produce 1,3-diynes in excellent yields under mild conditions. The substrates, alkynes, show enhanced reactivity and selectivity in ionic liquids (ILs). The recovery of the catalyst is facilitated by the hydrophobic nature of the [bmim]PF₆ ionic liquid.     

Facile nucleophilic fluorination by synergistic effect between polymer-supported ionic liquid catalyst and tert-alcohol reaction media system

A highly efficient method was developed for nucleophilic fluorination using an alkali metal fluoride through the synergistic effect of the polymer-supported ionic liquid (PSIL) as a catalyst and tert-alcohol as an alternative reaction media. This PSIL/tert-alcohol system not only enhances the reactivity of alkali metal fluorides and reduces the formation of by-products but also allows the use of a polymer-supported catalyst protocol. As an example, the nucleophilic fluorinations of the model compound, 2-(3-bromopropoxy)naphthalene, with CsF using only tert-amyl alcohol as solvent (for 2 h reaction time), 0.5 equiv of PS[hmim][BF₄] in CH₃CN (for 12 h reaction time), and 0.5 equiv of PS[hmim][BF₄] in tert-amyl alcohol (which is a PSIL/tert-alcohol system for the synergistic effect; for 2 h reaction time) provided 18, 40, and 84% yield, respectively. The characteristics of the nucleophilic fluorination reactions of some halo- and alkanesulfonyloxyalkane systems to the corresponding fluoroalkanes using various alkali metal fluorides are also reported.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Asymmetric reduction of aromatic ketones in pyridinium-based ionic liquids

The asymmetric reduction of aromatic ketones has been studied in pyridinium-based room temperature ionic liquids, namely, 1-ethyl-pyridinium tetrafluoroborate, [EtPy]⁺[BF₄]⁻ and 1-ethyl-pyridinium trifluoroacetate, [EtPy]⁺[CF₃COO]⁻. Ionic liquids were employed as solvents, while (R)-BINOL and (R)-BINOL-Br were used as chiral promoters. The effects of solvent, reaction time, temperature, catalyst loading and substituents were investigated. The reduction could be easily carried out in both ionic liquids with lower catalyst loading. 1-Ethyl-pyridinium tetrafluoroborate was recycled and reused efficiently.     

Ionic liquids enhanced oil recovery from oily sludge-experiment and mechanism

The oily sludge would cause environment pollution, and would cause the heavy oil waste. Therefore, it was vital for us to find novel methods to obtain heavy oil from the oily sludges. In this study, the [C₁₂mim][PF₆] and [C₁₂mim][Br] ionic liquids(ILs) were used to enhance the oil recovery. The toluene could obtain the highest oil recovery, and both the two ILs could increase the oil recovery. Toluene could obtain the highest oil recovery (89.4 wt%), and n-octane could obtain the lowest oil recovery (76.8 wt%). [C₁₂mim] [PF₆] could efficiently increase the heavy oil recovery to 91.2 wt%(by toluene). The [C₁₂mim][Br] could increase the heavy oil recovery further. Both the [C₁₂mim] [PF₆] and the [C₁₂mim][Br] ionic liquids could increase the heavy ois C/H ratio, decrease heavy oil viscosity and increase the sands hydrophilicity. The [C₁₂mim][Br] ionic liquids showed better effect. In addition, the ionic liquids could increase the solvents recovery, and the ionic liquids recovery were high. Therefore, the ionic liquids enhanced oil recovery could be recycled to ten times. The two ionic liquids could effectively decrease the heavy oil interaction force, and when the ionic liquids increased to 200 ppm, the force remained stable. In the end, the ionic liquids enhancing solvent extraction mechanism was put forward.     

Solvent relaxation of a room-temperature ionic liquid [bmim][PF6] confined in a ternary microemulsion

In this paper we have reported the solvent and rotational relaxation of 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim][PF₆]) confined in tween 20/([bmim][PF₆]/water microemulsion using coumarin 153 (C-153) as probe. The most interesting feature of our experiment was that we observed an increase in solvent relaxation time with increase in R (R = tween 20-to-[bmim][PF₆] molar ratio). This is due to the fact that with increase in [bmim][PF₆] content of the microemulsions, the microviscosity of the pool of the microemulsions increases, and motion of ions of [bmim][PF₆] is hindered in the pool of microemulsions. Since motion of ions is responsible for solvation in room-temperature ionic liquids (RTILs), solvent-relaxation time increases with increase in R.     

Thermodynamic modeling of hydrogen sulfide solubility in ionic liquids using modified SAFT-VR and PC-SAFT equations of state

Equations of state based on the statistical associating fluid theory for potentials of variable range (SAFT-VR) and the perturbed chain statistical associating fluid theory (PC-SAFT) have been used to model the PVT behavior of ionic liquids and the solubility of H₂S in six imidazolium-based ionic liquids. The studied systems included [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], [bmim][NTF2] and [hmim][NTF2] at various temperatures and pressures.For pure components, parameters of the models have been obtained by fitting the models to experimental data on liquid densities; the average relative deviation between the calculated and experimental densities for ionic liquids is less than 2.42% in the PC-SAFT model and 5.44% in the SAFT-VR approach, the latter which incorporates the square-well potential for short-range interactions. In both models an additional term has been added to account for dipole-dipole interactions between solute molecules resulting from the permanent charges on the chain molecules of the solvents. The model parameters have also been correlated as functions of the molecular weight of the solvents. For binary mixtures of ionic liquids and H₂S, the association interactions between H₂S molecules and between the ionic liquids and H₂S molecules have also been taken into account in both approaches, using binary interaction coefficients. The results show an average deviation of less than 5% in the calculation of the mole fraction of H₂S in the ionic liquids. The effect of inclusion of the polar term has been studied for binary systems in both models.