Determination of cationic surfactants in pharmaceutical disinfectants using a new sensitive potentiometric sensor

A new sensitive potentiometric surfactant sensor was prepared based on a highly lipophilic 1,3-didecyl-2-methyl-imidazolium cation and a tetraphenylborate antagonist ion. This sensor was used as a sensing material and incorporated into the plasticized PVC-membrane. The sensor responded fast and showed a Nernstian response for investigated surfactant cations: cetylpyridinium chloride (CPC), hexadecyltrimethylammonium bromide (CTAB) and Hyamine with slope 59.8, 58.6 and 56.8 mV/decade, respectively. The sensor served as an end-point detector in ion-pair surfactant potentiometric titrations using sodium tetraphenylborate as titrant. Several technical grade cationic surfactants and a few commercial disinfectant products were also titrated, and the results were compared with those obtained from a two-phase standard titration method. The sensor showed satisfactory analytical performances within a pH range of 2-11, and exhibited excellent selectivity performance for CPC compared to all of the organic and inorganic cations investigated. The influence of the nonionic surfactants on the shape of titration curves was negligible if the mass ratio of ethoxylated nonionic surfactants and cationic surfactants (EONS:CS) was not greater than 5.     

Determination of fluoxetine in pharmaceutical preparations and biological samples using potentiometric sensors based on polymeric membranes

The construction and general performance of four novel potentiometric membrane sensors for the determination of fluoxetine have been described. The sensors are based on the formation of the ion association complex of fluoxetine with sodium tetraphenylborate and phosphotungstic acid as electroactive materialles, dispersed in a PVC matrix with dibuthyl sebacate (or diethyl sebacate) as a plasticizer. These sensors exhibit fast, stable and near-Nernstian response for the monocharged fluoxetine cation over wide concentration range from 3.0 × 10^?6 to 1.2 × 10^?2 M and pH 4.0–7.5. No interferences are caused by many inorganic and organic species. Direct potentiometric determinations of 5–100 μg/mL of fluoxetine in drug and urine samples show good recovery of fluoxetine. The developed membrane electrodes have been used as an end point indicator electrode; the potentiometric titration of fluoxetine with sodium tetraphenylborate as a titrant has been monitored.     

Potentiometric propranolol-selective sensor based on molecularly imprinted polymer

A novel potentiometric sensor based on molecularly imprinted polymer (MIP) for propranolol, an adrenergic-blocking drug, was designed. The influence of molecularly imprinted polymer particle content and sodium tetraphenylborate additives in polyvinylchloride membrane was shown. The electrodes show near-Nernstian responses down to 10^?4–10^?5?M propranolol concentration. The potentiometric response of MIP-based sensor for propranolol in mixed nonaqueous medium was shown at first. Sensor selectivity relative to various inorganic cations, atenolol and metoprolol, was reported. Direct potentiometry was used to determine propranolol in aqueous modeling solutions and pharmaceutical preparations with good results.     

A lead (II) selective PVC membrane potentiometric sensor based on a tetraazamacrocyclic ligand

A polymeric membrane based Pb(II) selective potentiometric sensor was developed by using 1,3,7,9-tetraaza-2,8-dithia-4,10-dimethyl-6,12-diphenylcyclododeca-4,6,10,12-tetraene (TDDDCT) as an electroactive material along with anion excluder sodium tetraphenylborate (NaTPB) and plasticizer dioctylphthalate (DOP). The best performance in terms of slope, concentration range and response time was exhibited by the membrane having TDDDCT:PVC:DOP:NaTPB in the ratio 3:32:62:3 (w/w%). Potentiometric results show that the developed sensor works well in the concentration range 5.0 × 10^?7–1.0 × 10^?1 M with a near Nernstian slope of 29.5 (±0.5) mV decade^?1. The detection limit is down to 2.5 × 10^?7 M. The working pH range of this sensor is 2.8–7.0 and it works well in partially nonaqueous medium up to 25 % (v/v) methanol and ethanol. It exhibits a fast response time of 10 s. Selectivity coefficient values of various interfering ions were determined by the fixed interference method (FIM). The sensor reveals good selectivity for Pb(II) ions over other metal ions investigated. The developed sensor is used in the determination of lead in ‘Eveready battery waste’ and as an indicator electrode in the potentiometric titration of Pb(II) against EDTA.     

Development of All‐solid‐state Antidiabetic Drug Metformin‐selective Microsensor and its Electrochemical Applications

In this study, all‐solid‐state type potentiometric PVC membrane selective microsensor was developed for Metformin (MET) which is an antidiabetic drug active substance. Metformin‐tetraphenylborate (MET‐TPB) ion‐pair was used as an ionophore in the structure of the sensor membrane. It was determined that the sensor membrane at the ratio of 69 % o‐nitrophenyl octyl ether, 27 % polyvinyl chloride and 4 % MET‐TPB performed the best potentiometric performance. In a wide concentration range (1×10^?5–1×10^?1 mol/L), the slope, detection limit, response time, pH range, and life‐time of the sensor were determined as 55.9±1.6 mV (R²=0.996), 3.35×10^?6 mol/L, 8–10 s, pH: 3–8, and ～10 weeks, respectively. The voltammetric performances of the sensor were also investigated. The prepared microsensor was successfully utilized for the determination of Metformin in a pharmaceutical drug sample by potentiometry and voltammetry. It was observed that the obtained results were in agreement with the results obtained by the UV spectroscopy method at 95 % confidence level.     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate.     

Simultaneous potentiometric determination of cationic and ethoxylated nonionic surfactants in liquid cleaners and disinfectants

A sensitive potentiometric surfactant sensor based on a highly lipophilic 1,3-didecyl-2-methyl-imidazolium cation and a tetraphenylborate (TPB) antagonist ion was used as the end-point detector in ion-pair potentiometric surfactant titrations using sodium TPB as a titrant. Several analytical and technical grade cationic and ethoxylated nonionic surfactants (EONS) and mixtures of both were potentiometrically titrated.The sensor showed satisfactory analytical performances within a pH range of 3-10 and exhibited satisfactory selectivity for all CS and EONS investigated. Ionic strength did not influence the titration except at 0.1 M NaCl, in which a slight distortion of the second inflexion corresponded with the nonionic surfactant.Two-component combinations of four CS and three EONS were potentiometrically titrated using the sensor previously mentioned as the end-point detector. The quantities of the surfactants varied between 2 and 6 μmol for CS and 2.50 and 7.50 μmol for EONS. The known addition methodology was used for determination of the surfactant with considerably lower concentration in the mixture.Three commercial products containing cationic surfactants as disinfectants and nonionic surfactants were potentiometrically titrated, and the results for both type of surfactants were compared with those obtained with standard conventional methods.     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate. Received: 9 March 1998 / Revised: 21 April 1998 / Accepted: 25 April 1998     

Determination of novocaine in pharmaceutical preparations with novocaine(+)-selective membrane electrodes

Liquid-membrane ion-selective electrodes made with the ion-association complexes of novocaine with tetraphenylborate or dipicrylamine are proposed for use in the determination of novocaine by direct potentiometry or by potentiometric titration with sodium tetraphenylborate. The titration method is preferred, and the mean relative error for 4-12 mg of novocaine hydrochloride is 0.5%.     

A novel membrane sensor for histamine H1-receptor antagonist "fexofenadine".

The construction and general performance of thirteen new polymeric membrane sensors for the determination of fexofenadine hydrochloride based on its ion exchange with reineckate, tetraphenylborate and tetraiodomercurate have been studied. The effects of membrane composition, type of plasticizer, pH value of sample solution and concentration of the analyte in the sensor internal solution have been thoroughly investigated. The novel sensor based on reineckate exchanger shows a stable, potentiometric response for fexofenadine in the concentration range of 1 x 10(-2) - 2.5 x 10(-6) M at 25 degrees C that is independent of pH in the range of 2.0 - 4.5. The sensor possesses a Nernstian cationic slope of 62.3+/-0.7 mV/concentration decade and a lower detection limit of 1.3 x 10(-6) M with a fast response time of 20 - 40 s. Selectivity coefficients for a number of interfering ions and excipients relative to fexofenadine were investigated. There is negligible interference from almost all studied cations, anions, and pharmaceutical excipients, however, citrizine that has a structure homologous to that of fexofenadine was found to interfere. The determination of fexofenadine in aqueous solution shows an average recovery of 99.83% with a mean relative standard deviation (RSD) of 0.5%. Direct potentiometric determination of fexofenadine in tablets gave results that compare favorably with those obtained by standard spectrophotometric methods. Potentiometric titration of fexofenadine with phosphomolybdic acid as a titrant has been monitored with the proposed sensor as an end point indicator electrode.     

A selective membrane electrode for lanthanum(III) ion based on a hexaaza macrocycle derivative as ionophore.

We have developed a highly La(III)-selective PVC membrane electrode based on a hexaaza macrocycle, 8,16-dimethyl-6,14-diphenyl-2,3,4:10,11,12-dipyridine-1,3,5,9,11,13-hexaazacyclohexadeca-3,5,8,11,13,16-hexaene [Bzo2Me2Pyo2(16)-hexaeneN6] (I) as membrane carrier, dibutylbutyl phosphonate (DBBP) as solvent mediator and sodium tetraphenylborate (NaTPB) as lipophilic additive. The best performance was given by the membrane of macrocycle I having a composition 10:260:5:120 (I:DBBP:NaTPB:PVC). The electrode exhibits a Nernstian response to La(III) ion in the concentration range 1.0x10(-1)-7.94x10(-7) M with a slope of 19.8+/-0.2 mV/decade of concentration and a detection limit of 5.62x10(-7) M. The response time of the sensor is 12 s and it can be used over a period of 4 months with good reproducibility. The electrode works well over a pH range of 2.5-10.0 and in partially non-aqueous medium with up to 30% organic content. The sensor was also used as an indicator electrode in potentiometric titration of La(III) ions with EDTA and for determining La(III) concentration in real samples.     

PVC Membrane electrodes for manual and flow-injection determination of tetraphenylborate: Applications to separate and sequential titrations of some metal ions

Three novel poly (vinyl chloride) matrix membrane electrodes, highly sensitive and selective for tetraphenylborate anion (TPB), are developed and electrochemically evaluated. They are based on the use of iron(II) bathophenanthroline, nickel(II) bathophenanthroline-and nitron-TPB ion-pair complexes as electroactive materials with dioctylphthalate (DOP) and 2-nitrophenyl phenyl ether (NPPE) as plasticizing solvent mediators. The electrodes exhibit stable and rapid near-Nernstian response for 10(-2)-10(-6)M TPB over the pH range 4-10. Use of these electrodes for direct potentiometric determination and potentiometric titration of as low as 1 mug of TPB/ml and 0.6 mg of TPB/ml give results with average recoveries of 99.3% (mean standard deviation 0.5%) and 99.4% (mean standard deviation 0.2%), respectively. Incorporation of nitron-TPB PVC sensor in a flow-through sandwich cell provides an efficient flow-injection detector for determining TPB with an input rate of at least 60 samples/hr. The limit of detection is 1.6 mug TPB/ml in a 20-mul sample. The electrodes are also used to monitor separate and sequential titrations of some metal ions with TPB. Alkaline earth and transition-metal ions upon reaction with polyethylene glycol and ethylenediamine, respectively, form cationic complexes readily titrated with TPB. Optimum conditions are outlined for sequential titrations of various combinations of metallic species.     

Plastic membrane ion-selective electrode for the determination of denatonium benzoate (Bitrex).

A poly(vinyl chloride) matrix membrane ion-selective electrode for the determination of the denatonium ion based on the denatonium salt of tetraphenylborate is described. The response characteristics of the electrode for the denatonium ion and for several quaternary ammonium compounds were studied. The potentiometric determination of denatonium benzoate in rapeseed oil in the range 1-10 ppm agreed to within +/-5% of the spiked amounts. The application of the electrode to the titrimetric determination of several quaternary ammonium compounds using sodium tetraphenylborate as the titrant is also described.     

All-solid-state potentiometric sensors sensitive to nonionic surfactants based on ionophores containing ethoxylate units

Earlier work of potentiometric Ion-selective electrodes (ISEs) sensitive to nonionic surfactants of the polyethoxylate type is further extended. The ISEs constructed were all-solid-state sensors with plasticized PVC membranes. The sensing material was a tetraphenylborate salt of the barium complex with a polyethoxylate nonionic surfactant. As membrane component, the combinations of two polyethoxylates of the nonylphenoxy type, which differed in the number of oxyethylene units (5 or 12), and two different plasticizers, (o-nitrophenyloctyl ether and o-nitrophenylphenyl ether), were tested. The response of these electrodes to different nonionic surfactants and the interference effect of several species has been evaluated. For all the types of tested electrodes, the sensitivities shown were ca. 30.0 mV dec(-1) and the limit of detection, ca. 10(-5) M, when a nonylphenoxyde with 12 oxyethylene units was used as standard. The membrane with the best response characteristics was then applied in potentiometric titrations of this kind of surfactants in the presence of Ba(2+) ion and using tetraphenylborate as the titrant.     

Facile Synthesis and Characterization of 5-[(3-Methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole and Its Potentiometric Sensor Application in a Polyvinyl Chloride Membrane for the Determination of Copper(II)

A novel Schiff base designated as 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole was synthesized and characterized. A polyvinyl chloride-membrane potentiometric copper(II)-selective sensor was prepared by using the synthesized 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole compound. The prepared polyvinyl chloride-membrane copper(II)-selective sensor exhibited very good selectivity and sensitive potentiometric response towards copper(II) ions compared to a wide variety of other cations. The sensor had a fast response time of <5?s, and showed a linear Nerstian behavior to copper(II) ions over a wide concentration range from 1.0?×?10^?5 to 1.0?×?10^?1 mol L^?1 with a slope of 29.2?±?0.7 and correlation coefficient of 0.9998. The prepared polyvinyl chloride-membrane copper(II)-selective sensor was used for 14 weeks without any significant change in its potentiometric response. The potentiometric response of the developed sensor was highly repeatable. Additionally, the developed sensor was used as an indicator electrode for the potentiometric titration of copper(II) ion with ethylenediaminetetraacetic acid. The sensor was also successfully applied to the direct determination of copper(II) ions in tap water, river water, and dam water samples.     

2,6-bis-methylsulfanyl-[1,3,5]thiadiazine-4-thione as a Ag+-selective ionophore.

A silver ion-selective electrode was prepared with a polymeric membrane incorporating 2,6-bis-methylsulfanyl-[1,3,5]thiadiazine-4-thione as an ionophore, tri-n-butylphosphate (TBP) as a plasticizer and sodium tetraphenylborate (NaTPB) as an additive. The electrode exhibited a near-Nernstian response of 52 mV/decade over a wide linear concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M with a lower detection limit of 9.77 x 10(-6) M. The electrode exhibited excellent selectivity for silver ion over many of the alkali, alkaline-earth and transition metal ions. The electrode worked well over a wide pH range of 1.77 - 7.13. The response time of the electrode was less than 20 s. The sensor can be applied as indicator electrode for the potentiometric titration of Ag+ ions with Cl- ions.     

测定盐酸西布曲明的电位传感器的研制与应用

以四苯硼酸钠与盐酸西布曲明生成的离子缔合物为电活性物质,研制了盐酸西布曲明传感器。试验表明:盐酸西布曲明聚氯乙烯(PVC)膜传感器对盐酸西布曲明具有良好的选择性和电位响应特性。在pH 5的溶液中,电极电位呈现近能斯特响应,线性范围为1.0×10-6～1.0×10-1mol.L-1,斜率为50 mV.pc-1(26℃),检出限(3S/N)为5.62×10-7mol.L-1。将电极用于药物中盐酸西布曲明含量的测定,测得回收率为97.3%～100.2%,测定值的相对标准偏差(n=5)均小于2%。     

A Disposable Homemade Screen Printed Electrochemical Sensor for Vitamin B1 Determination in Multivitamin Ampoules: Potentiometric and Surface Morphology Studies

Thiamine chloride hydrochloride (TCH) is one of the B‐complex vitamins which resemble a very biologically important group of biomolecules. The first screen‐printed graphite ion‐selective sensor for the determination of TCH was prepared and characterized. The sensor is based on TCH‐tetraphenylborate as electrode material. A number of parameters such as the type of solvent mediator, weight percent of the ion‐exchanger, test solution temperature and possible interferences were extensively studied. Moreover, the surface morphology of the prepared sensor was studied using scanning electron microscopy. The sensor shows a Nernstian slope of 30.60±0.07 mV/decade, a low LOD of 5.08×10⁻⁶ mol/L and a wide applicability range of 5.96×10⁻⁶‐1.00×10⁻² mol/L. The sensing graphite ink remains usable for at least one month. Fast potentiometric response was obtained within 5 s and remains stable for at least 60 s. The sensor was applied to the analysis of TCH in pure solutions and multivitamin ampoules from the Egyptian market using the standard addition method and high recovery values of 97–102 % were obtained. Low %RSD values (0.27‐1.30) indicate high precision of the proposed sensor. Our sensor provides the advantages of disposability, simple preparation procedures, sensitivity and easy storage and transportation.     

Highly Selective Lead(II) Coated Graphite Sensor Based on 4,13-Didecyl-1,7,10,16-tetraoxa-4,13- diazacyclooctadecane as a Neutral Ionophore

4,13-Didecyl-1,7,10,16-tetraoxa-4,13-diazacyclooctadecane (kryptofix22DD) has been explored as a neutral ionophore for preparing polyvinyl chloride (PVC)-based membrane sensor selective to lead(II). The optimized membrane incorporating kryptofix22DD as the active material, nitrobenzene as plasticizer and sodium tetraphenylborate as an anion excluder and membrane modifier in PVC (in the weight ratio of 5.0: 63.0: 2.0: 30.0, respectively) was directly coated on the surface of graphite rod. The sensor exhibits a Nernstian slope (29.4 mV/decade) in the concentration range of 1.0 × 10^–5 to 1.0 × 10^–1 M Pb²⁺. The detection limit of the sensor is 6.5 × 10^–6 M. The proposed sensor has a fast response time (~10 s), a satisfactory reproducibility and relatively long lifetime. The electrode shows high selectivity toward Pb²⁺ ion in comparison to other common cations. The proposed sensor is suitable for use in aqueous solutions in a wide pH range of 2.0–10.0. It was used as an indicator electrode for the end point detection in the potentiometric titration of Pb²⁺ ion with ethylenediaminetetraacetic acid (EDTA) and sodium iodide (NaI) solutions. The proposed sensor was successfully applied for the recovery of Pb²⁺ ions spiked in real water samples.     

Chelating ionophore based membrane sensors for copper(II) ions

Acetylacetone, ethylacetoacetate and salicyldehyde, are reported to form chelates with copper of high stability as compared to other metals. Therefore, PVC based membranes of bis[acetylacetonato] Cu(II) (A), bis[ethylacetoacetate] Cu(II) (B) and bis[salicyldehyde] Cu(II) (C) have been investigated as copper(II) selective sensors. The addition of sodium tetraphenylborate and various plasticizers, viz., DOS, TEHP, DOP, DBP and TBP have been found to substantially improve the performance of the sensors. The membranes of various compositions of the three chelates were investigated and it was found that the best performance was obtained for the membrane of composition A (1%): PVC (33%): TBP (65%): NaTPB (1%). The sensor shows a linear potential response to Cu(II) over wide concentration range 2.0 × 10⁻⁶ to 1.0 × 10⁻¹ M (detection limit 0.1 ppm) with Nernstian compliance (29.3 mV decade⁻¹ of activity) between pH 2.6 and 6.0 with a fast response time of 9 s. The potentiometric selectivity coefficient values as determined by match potential method (MPM) indicate excellent selectivity for Cu²⁺ ions over interfering cations. The sensor exhibits adequate shelf life (3 months) with good reproducibility (S.D. ±0.2 mV). The sensor has been used in the potentiometric titration of Cu²⁺ with EDTA. The utility of the sensor has been tested by determining copper in vegetable foliar and multivitamin capsule successfully.