Second-order conditional moment closure modeling of a turbulent CH4/H2/N2 jet diffusion flame

The second-order CMC model for a detailed chemical mechanism is used to model a turbulent CH₄/H₂/N₂ jet diffusion flame. Second-order corrections are made to the three rate limiting steps of methane–air combustion, while first-order closure is employed for all the other steps. Elementary reaction steps have a wide range of timescales with only a few of them slow enough to interact with turbulent mixing. Those steps with relatively large timescales require higher-order correction to represent the effect of fluctuating scalar dissipation rates. Results show improved prediction of conditional mean temperature and mass fractions of OH and NO. Major species are not much influenced by second-order corrections except near the nozzle exit. A parametric study is performed to evaluate the effects of the variance parameter in log-normal scalar dissipation PDF and the constants for the dissipation term in conditional variance and covariance equations.     

研究两相流中固粒对流体湍动特性影响的新方法

本文提出了计算两相流中固粒对流体湍动特性影响的一种新方法，得到不同情况下固粒对流体端动特性的影响。将该方法用于槽流湍流场的求解，说明该方法是可行的。     

Analysis of second-order conditional moment closure applied to an autoignitive lifted hydrogen jet flame

The timing and location of autoignition can be highly sensitive to turbulent fluctuations of composition. Second-order Conditional Moment Closure (CMC) provides transport equations for conditional (co)variances in turbulent reacting flows. CMC equations accounting for compressibility and differential diffusion are analyzed using data from direct numerical simulation of an autoignitive lifted turbulent hydrogen jet flame [C.S. Yoo, R. Sankaran, J.H. Chen, Three-dimensional direct numerical simulation of turbulent lifted hydrogen/air jet flame in a heated coflow. Part 1. J. Fluid. Mech., (2008)]. At the flame base, second-order moments were required to accurately model the conditional reaction rates. However, over 80% of the second-order reaction rate component was obtainable with a small subset (16%) of the species-temperature covariances. The balance of the second-order CMC equation showed that turbulent transport across spatial composition gradients initiates generation of conditional variances.     

Time-averaging strategies in the finite-volume/particle hybrid algorithm for the joint PDF equation of turbulent reactive flows

The influence of time-averaging on bias is investigated in the finite-volume/particle hybrid algorithm for the joint PDF equation for statistically-stationary turbulent reactive flows. It is found that the time-averaging of the mean fluctuating velocity (TAu) leads to the same variances of the fluctuating velocity before and after the velocity correction, whereas without TAu the estimates are different, and an additional numerical dissipation rate is introduced for the turbulent kinetic energy (TKE). When 100 particles per cell are used without TAu, a large bias error is found to be involved in the unconditional statistics of the statistically-stationary solutions of two tested turbulent flames, the Cabra H₂/N₂ lifted flame and the Sandia piloted flame E. The use of TAu reduces this bias dramatically for the same number of particles per cell. The conditional statistics in these flames, however, are hardly affected by TAu. To a large extent, the effect of the bias error on the unconditional statistics is similar to the effect of increasing the model constant C _{ω 1} in the stochastic turbulence frequency model.     

Non-premixed turbulent combustion modeling based on the filtered turbulent flamelet equation

In turbulent combustion simulations, the flow structure at the unresolved scale level needs to be reasonably modeled. Following the idea of turbulent flamelet equation for the non-premixed flame case, which was derived based on the filtered governing equations(L. Wang, Combust. Flame 175, 259(2017)), the scalar dissipation term for tabulation can be directly computed from the resolved flowing quantities, instead of solving species transport equations. Therefore, the challenging source term closure for the scalar dissipation or any assumed probability density functions can be avoided;meanwhile the chemical sources are closed by scaling relations. The general principles are discussed in the context of large eddy simulation with case validation. The new model predictions of the bluff-body flame show sufficiently improved results, compared with these from the classic progress-variable approach.     

Compressible turbulent flame speeds of highly turbulent standing flames

In this paper we present the first measurement of turbulent burning velocities of a highly turbulent compressible standing flame induced by shock-driven turbulence in a Turbulent Shock Tube. High-speed schlieren, chemiluminescence, PIV, and dynamic pressure measurements are made to quantify flame–turbulence interaction for high levels of turbulence at elevated temperatures and pressure. Distributions of turbulent velocities, vorticity and turbulent strain are provided for regions ahead and behind the standing flame. The turbulent flame speed is directly measured for the high-Mach standing turbulent flame. From measurements of the flame turbulent speed and turbulent Mach number, transition into a non-linear compressibility regime at turbulent Mach numbers above 0.4 is confirmed, and a possible mechanism for flame generated turbulence and deflagration-to-detonation transition is established.     

空间发展平板混和层流动的大涡模拟-3D与2D模拟的比较

本文利用大涡模拟方法研究了空间发展平板混合层流动,分别在三维模型和二维模型下,比较了大尺度结构涡的演化过程,以及流向速度、流向脉动速度、横向脉动速度和Reynolds应力的统计时均结果,并与实验结果对照,指出3D模拟无论在物理真实性还是预报结果准确性方面都要明显优于2D模拟。     

Effects of Lewis number,density ratio and gravity on burning velocity and conditional statistics in stagnating turbulent premixed flames

DNS is performed to analyse the effects of Lewis number (Le), density ratio and gravity in stagnating turbulent premixed flames. The results show good agreement with those of Lee and Huh (Combustion and Flame, Vol. 159, 2012, pp. 1576–1591) with respect to the turbulent burning velocity, S_T, in terms of turbulent diffusivity, flamelet thickness, mean curvature and displacement speed at the leading edge. In all four stagnating flames studied, a mean tangential strain rate resulting in a mean flamelet thickness smaller than the unstretched laminar flame thickness leads to an increase in S_T. A flame cusp of positive curvature involves a superadiabatic burned gas temperature due to diffusive–thermal instability for an Le less than unity. Wrinkling tends to be suppressed at a larger density ratio, not enhanced by hydrodynamic instability, in the stagnating flow configuration. Turbulence is produced, resulting in highly anisotropic turbulence with heavier unburned gas accelerating through a flame brush by Rayleigh–Taylor instability. Results are also provided on brush thickness, flame surface density and conditional velocities in burned and unburned gas and on flame surfaces to represent the internal brush structures for all four test flames.     

非阿贝尔介质对外源的非线性响应方程

从动力论理论出发,使用弱湍理论方法,有效地展开了夸克–胶子等离子体的动力论方程,从而给出了夸克–胶子等离子体介质对外流的非线性非阿贝尔响应方程。     

A LES-CMC formulation for premixed flames including differential diffusion

A finite volume large eddy simulation–conditional moment closure (LES-CMC) numerical framework for premixed combustion developed in a previous studyhas been extended to account for differential diffusion. The non-unity Lewis number CMC transport equation has an additional convective term in sample space proportional to the conditional diffusion of the progress variable, that in turn accounts for diffusion normal to the flame front and curvature-induced effects. Planar laminar simulations are first performed using a spatially homogeneous non-unity Lewis number CMC formulation and validated against physical-space fully resolved reference solutions. The same CMC formulation is subsequently used to numerically investigate the effects of curvature for laminar flames having different effective Lewis numbers: a lean methane–air flame with Le_eff = 0.99 and a lean hydrogen–air flame with Le_eff = 0.33. Results suggest that curvature does not affect the conditional heat release if the effective Lewis number tends to unity, so that curvature-induced transport may be neglected. Finally, the effect of turbulence on the flame structure is qualitatively analysed using LES-CMC simulations with and without differential diffusion for a turbulent premixed bluff body methane–air flame exhibiting local extinction behaviour. Overall, both the unity and the non-unity computations predict the characteristic M-shaped flame observed experimentally, although some minor differences are identified. The findings suggest that for the high Karlovitz number (from 1 to 10) flame considered, turbulent mixing within the flame weakens the differential transport contribution by reducing the conditional scalar dissipation rate and accordingly the conditional diffusion of the progress variable.     

Conditional moment closure modelling of turbulent methanol jet flames

Conditional moment closure (CMC) predictions for a turbulent piloted jet diffusion flame of methanol in air at velocities of 66.2 and 90.3 m s^?1 are presented. Predictions are compared with the experimental joint Raman-Rayleigh-LIF results of Masri et al and laminar flamelet calculations. Three comprehensive chemical mechanisms (SKELETAL, GRI-Mech and SUBGRI) are used to represent the chemistry of the methanol flame. The SKELETAL mechanism shows the best agreement among the various mechanisms employed. It is found that the SUBGRI mechanism reduces computational cost in terms of memory and CPU time without compromising results where the focus is on the main reactive chemistry.

The k-ε-g turbulence model underpredicts the rate of mixing and the predicted flames are somewhat longer than that reported by experiment. In general, the CMC predictions for conditional mean temperature and species mass fractions are very good and show qualitative agreement with experiment. At downstream locations, the overall trends of predicted temperature and species concentration levels are similar to the upstream ones with the latter showing better agreement with the conditional measured levels. CMC predictions show the same order of agreement at higher velocities.

It is believed that the discrepancies on the fuel-rich side may be due to lack of consideration of the conditional fluctuations. The absence of a radially dependent CMC formulation, excluding differential diffusion effects and the inadequacy of the chemical mechanism may also account, partly, for the degree of discrepancy in the predictions.     

Modelling of lifted turbulent diffusion flames in a channel mixing layer by the flame hole dynamics

The partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics as an effort to develop a prediction model for the turbulent flame lift off. The essence of the flame hole dynamics is derivation of the random walk mapping, from the flame-edge theory, which governs expansion or contraction of the quenching holes initially created by the local quenching events. The numerical simulation for the flame hole dynamics is carried out in two stages. First, a direct numerical simulation is performed for a constant-density fuel–air channel mixing layer to obtain the background turbulent flow and mixing fields, from which a time series of two-dimensional scalar-dissipation-rate array is extracted. Subsequently, a Lagrangian simulation of the flame hole random walk mapping, projected to the scalar dissipation rate array, yields a temporally evolving turbulent extinction process and its statistics on partial quenching characteristics. In particular, the probability of encountering the reacting state, while conditioned with the instantaneous scalar dissipation rate, is examined to reveal that the conditional probability has a sharp transition across the crossover scalar dissipation rate, at which the flame edge changes its direction of propagation. This statistical characteristic implies that the flame edge propagation instead of the local quenching event is the main mechanism controlling the partial quenching events in turbulent flames. In addition, the conditional probability can be approximated by a heavyside function across the crossover scalar dissipation rate.     

Application of the Lagrangian CMC method in elliptic bluff body and swirl flames

The Lagrangian CMC method was implemented in the open source programme OpenFOAM and applied to turbulent nonpremixed bluff body and swirl flames. Lagrangian CMC is more efficient than Eulerian CMC with the number of Lagrangian flame groups much less than the number of computational cells for Eulerian CMC equations in general. It is based on the conditional flame structure depending on the residence time of the fuel of fixed Lagrangian identity from the nozzle. According to sensitivity study the injected fuel was divided into ten flame groups according to the injection sequence with the resulting conditional profiles between those by ISR and Eulerian CMC. Minor deviation from Eulerian CMC was attributed to the flame structure that is difficult to be characterised by the residence time only in elliptic recirculating flows of the bluff body and swirl flames. The Eulerian and Lagrangian CMC showed the same trend of deviation from measurements for conditional temperature, H₂O, OH, CO and H₂ mass fractions. The significant deviation of H₂ was due to uncertainty in the reaction chemistry, as observed in the previous works based on other reaction mechanisms for methane and methanol.     

CO2 addition and pressure effects on laminar and turbulent lean premixed CH4 air flames

An experimental study on CH₄–CO₂–air flames at various pressures is conducted by using both laminar and turbulent Bunsen flame configurations. The aim of this research is to contribute to the characterization of fuel lean methane/carbon dioxide/air premixed laminar and turbulent flames at different pressures, by studying laminar and turbulent flame propagation velocities, the flame surface density and the instantaneous flame front wrinkling parameters. PREMIX computations and experimental results indicate a decrease of the laminar flame propagation velocities with increasing CO₂ dilution rate. Instantaneous flame images are obtained by Mie scattering tomography. The image analysis shows that although the height of the turbulent flame increases with the CO₂ addition rate, the flame structure is quite similar. This implies that the flame wrinkling parameters and flame surface density are indifferent to the CO₂ addition. However, the pressure increase has a drastic effect on both parameters. This is also confirmed by a fractal analysis of instantaneous images. It is also observed that the combustion intensity S_T/S_L increases both with pressure and the CO₂ rate. Finally, the mean fuel consumption rate decreases with the CO₂ addition rate but increases with the pressure.     

轴对称钝体后湍流扩散燃烧的PDF模拟

在无结构网格中，对轴对称钝体驻定的湍流扩散火焰进行数值模拟．采用有限容积(FV)／Monte Carlo(MC)混合算法求解湍流燃烧问题的混合算法．Monte Carlo法求解脉动速度一标量．频率的联合概率密度函数方程，有限容积法求解平均质量、动量和能量方程．求解的两组方程是相容的，合理的耦合方式可以减少统计偏差，计算精度和效率显著优于单独的颗粒方法．文中对化学反应采用层流火焰面模型，并将数值计算结果与实验结果作了比较和分析．     

The compositional structure of highly turbulent piloted premixed flames issuing into a hot coflow

Simultaneous line measurements of major species and temperature by the Raman–Rayleigh technique, combined with CO two-photon laser-induced fluorescence and crossed-plane OH planar laser-induced fluorescence have been applied to a series of flames in the Piloted Premixed Jet Burner (PPJB). The PPJB is capable of stabilizing highly turbulent premixed jet flames through the use of a stoichiometric pilot and a large coflow of hot combustion products. Four flames with increasing jet velocities and constant jet equivalence ratios are examined in this paper. The characteristics of these four flames range from stable flame brushes with reaction zones that can be described as thin and “flamelet-like” to flames that have thickened reaction zones and exhibit extinction re-ignition behaviour. Radial profiles of the mean temperature are reported, indicating the mean thermal extent of the pilot and spatial location of the mean flame brush. Measurements of carbon monoxide (CO) and the hydroxyl radical (OH) reveal a gradual decrease in the conditional mean as the jet velocity is increased and the flame approaches extinction. Experimental results for the conditional mean temperature gradient show a progressive trend of reaction zone thickening with increasing jet velocities, indicating the increased interaction of turbulence with the reaction zone at higher turbulence levels. For the compositions examined, the product of CO and OH mole fractions ([CO][OH]) is shown to be a good qualitative indicator for the net rate of production of carbon dioxide. The axial variation of [CO][OH] is shown to correlate well with the mean chemi-luminescence of the flames including the extinction re-ignition regions. The experimental findings reported in this paper further support the hypothesis of an initial ignition region followed by extinction and re-ignition regions for certain PPJB flames.     

Conditional moment closure and transient flamelet modelling for detailed structure and NO x formation characteristics of turbulent nonpremixed jet and recirculating flames

This study has been mainly motivated to assess computationally and theoretically the conditional moment closure (CMC) model and the transient flamelet model for the simulation of turbulent nonpremixed flames. These two turbulent combustion models are implemented into the unstructured grid finite volume method that efficiently handles physically and geometrically complex turbulent reacting flows. Moreover, the parallel algorithm has been implemented to improve computational efficiency as well as to reduce the memory load of the CMC procedure. Example cases include two turbulent CO/H₂/N₂ jet flames having different flow timescales and the turbulent nonpremixed H₂/CO flame stabilized on an axisymmetric bluff-body burner. The Lagrangian flamelet model and the simplified CMC formulation are applied to the strongly parabolic jet flame calculation. On the other hand, the Eulerian particle flamelet model and full conservative CMC formulation are employed for the bluff-body flame with flow recirculation. Based on the numerical results, a detailed discussion is given for the comparative performances of the two combustion models in terms of the flame structure and NO _x formation characteristics.     

横向粗糙元壁面槽道湍流的大涡模拟研究

采用大涡模拟和浸没边界法相结合对不同高度和不同间距横向粗糙元壁面槽道湍流进行了模拟,得到了光滑壁面和粗糙壁面湍流的流向平均速度分布,雷诺剪切应力,脉动速度均方根和近壁区拟序结构。结果发现横向粗糙元降低了流向平均速度,增大了流动阻力,粗糙壁面湍流的雷诺剪切应力大于光滑壁面。粗糙元降低了流向脉动速度,增强了展向和法向脉动速度。粗糙元高度越高,对湍流流动影响越大,而粗糙元间距对湍流统计特性的影响不大。粗糙壁面仍然存在着和光滑壁面类似的条带结构。     

Investigation of lengthscales, scalar dissipation, and flame orientation in a piloted diffusion flame by LES

This work investigates the structure of a diffusion flame in terms of lengthscales, scalar dissipation, and flame orientation by using large eddy simulation. This has been performed for a turbulent, non-premixed, piloted methane/air jet flame (Flame D) at a Reynolds-number of 22,400. A steady flamelet model, which was represented by artificial neural networks, yields species mass fractions, density, and viscosity as a function of the mixture fraction. This will be shown to suffice to simulate such flames. To allow to examine scalar dissipation, a grid of 1.97 × 10⁶ nodes was applied that resolves more than 75% of the turbulent kinetic energy. The accuracy of the results is assessed by varying the grid-resolution and by comparison to experimental data by Barlow, Frank, Karpetis, Schneider (Sandia, Darmstadt), and others. The numerical procedure solves the filtered, incompressible transport equations for mass, momentum, and mixture fraction. For subgrid closure, an eddy viscosity/diffusivity approach is applied, relying on the dynamic Germano model. Artificial turbulent inflow velocities were generated to feature proper one- and two-point statistics. The results obtained for both the one- and two-point statistics were found in good agreement to the experimental data. The PDF of the flame orientation shows the tilting of the flame fronts towards the centerline. Finally, the steady flamelet approach was found to be sufficient for this type of flame unless slowly reacting species are of interest.