Influence of interaction between poly(methyl methacrylate) and clay on the properties of nanocomposites prepared by a heterocoagulation method

To have a better insight into the effect of interaction between polymer matrix and clay on the properties of nanocomposite, poly(methyl methacrylate)/clay nanocomposites were prepared by a heterocoagulation method. Using a reactive cationic emulsifier, methacryloyloxyethyltrimethyl ammonium chloride (METAC), a strong polymer–clay interaction was obtained with the advantage of keeping a consistent polymer matrix property. X‐ray diffraction and transmission electronic microscopy indicated an exfoliated structure in nanocomposites. The glass transition temperature (T_g) of the nanocomposites was measured by DSC and DMA. The DMA results showed that with a strong interaction, PMMA–METAC nanocomposite showed a 20 °C enhancement in glass transition temperature (T_g), whereas a slight increase in T_g was observed for PMMA–cetyl trimethylammonium bromide (CTAB)/clay nanocomposite with a weak interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 733–738, 2010     

Structure-property relationships of new polystyrene nanocomposites prepared from initiator-containing layered double hydroxides of zinc aluminum and magnesium aluminum

Polystyrene/layered double hydroxides (PS/LDHs) nanocomposites were prepared by free radical polymerization of styrene monomer in the presence of LDHs intercalated with 4,4′-azobis(4-cyanopentanoate) anions (LDH-ACPA). XRD and ATR-IR are used to confirm that the materials produced are layered and the presence of the azo-initiator anions in these LDHs. These LDHs were used successfully to polymerize styrene and both XRD and TEM images of the composites support the formation of a mixed exfoliated-intercalated nanocomposite for ZnAl-ACPA but a microcomposite for MgAl-ACPA. The magnesium-containing LDHs decreased the glass transition temperature (T_g) of the composites while ZnAl-ACPA did not affect T_g significantly. The T_g depression is related to enhanced polymer dynamics due to the extra free volume at the LDH additive-polymer interface. A reduction in the onset of thermal decomposition temperature was observed in PS/LDH compared to neat PS, likely due to the early decomposition of the LDH. The fire performance, as evaluated by the cone calorimeter, reveal that PS-ZnAl-ACPA shows enhanced fire properties compared to PS-MgAl-ACPA.     

Preparation of poly(methyl acrylate)/phosphate/composites and its possible use as storage medium for radioactive isotopes

The distribution of ¹³⁷Cs, ¹⁵²Eu, ²³⁸U, and ⁸⁵Sr in a solid/aqueous system (poly(methyl acrylate)/phosphate/composite in contact with groundwater, was investigated using γ-Spectrometry and flourometry. The results were compared with earlier results with mineral phosphate in the solid phase. The effect of contact time, pH and the concentration of concurrent element were studied. The ability of the prepared polymer composites to keep the studied radioisotopes in the solid phase is much higher than mineral phosphate. The used polymer composites have been prepared consisting of natural phosphate powder and the monomer methyl acrylate using gamma irradiation. The yield of polymerization was followed up with respect to the irradiation dose using thermogravimetric analyzer (TGA). A thermomechanical analyzer (TMA) was used to locate the area of the glass transition temperatures (T _g ) using the mode with alternative variable force; the mode with constant force was used to determine the T _g of the pure polymer and the polymer composite prepared at the same irradiation dose. The T _g of the pure poly(methyl acrylate) is 13 ± 3 °C, and the T _g of poly(methyl acrylate)/phosphate/composites is 8 ± 3 °C. The T _g were also determined using the DSC technique, and similar values were found.     

Synthesis of Core-Shell Particles of Polystyrene and Poly(methyl methacrylate) Using Emulsion Photopolymerization

Summary: Submicron core-shell particles of polystyrene (PS) and polystyrene-co-poly(methyl methacrylate) (PS-co-PMMA) coated with PMMA were obtained by emulsion photopolymerization. The seeds of PS or PS-co-PMMA were prepared by emulsion polymerization with or without emulsifier and a ratio of functional monomer and crosslinker (SVBS/EDGMA) in order to obtain different surfaces for the subsequent coating with PMMA. At each stage, the evolution of the average particle size were monitored by using photon correlation spectroscopy (DLS) and the final polymer particles was analyzed via transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The core-shell morphology was identified as the increase of the average particle size in the second stage by DLS technique and by the direct observation by TEM of the differentiation between PS core and PMMA shell, and by the presence of two glass transition temperatures (T_g) as a consequence of the existence of two partially miscible phases.     

Molecular composites made of ionic poly(p‐phenylene terephthalamide) and poly(4‐vinylpyridine): Relaxation behavior

Molecular composites were prepared from several types of ionically modified, poly(p‐phenylene terephthalamide) (PPTA) dispersed in a poly(4‐vinylpyridine) matrix. Optical clarity tests indicated that the component polymers of the composite were miscible, at least at low concentrations of the rodlike reinforcement. In composites containing ionic PPTA, where ionic sulfonate groups were attached as side groups either to PPTA chains or to PPTA anion chains, the glass‐transition temperature (T_g) was increased by l0 °C or more, at 5 wt % reinforcement. At concentrations of 10–15 wt % of the ionic polymer, T_g values leveled off or decreased slightly. This suggested that some aggregation of the rigid‐rod molecules occurred. In composites containing ionic PPTA, where the ionic sulfonate groups were directly attached to the phenylene rings of PPTA chains, not only was T_g shifted significantly to higher temperatures, but the rubbery plateau modulus retained high values up to temperatures of 250 °C or above. Observed effects were considered to be the result of strong ionic interactions between the ionic reinforcement polymer and the polar matrix polymer. The possible effects of the counterion on T_g and the storage modulus are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1110–1117, 2002     

Effect of AlN content on the performance of brominated epoxy resin for printed circuit board substrate

Polymer matrix composites, based on brominated epoxy, a type of material widely used in printed circuit boards (PCBs), as matrix and AlN particle as filler were prepared. The influences of AlN content on the mechanical, thermal, and electrical properties of the composites were investigated by uniaxial tensile test, TMA, thermal conductivity measurement, DMA, and dielectric properties measurement. It was found that the properties of composites monotonically varied with AlN content except that maximum tensile strength and strain of composites corresponded to a filler content of 10 wt %. The results of DMA also showed the AlN reinforcement was more pronounced above T_g, and the peak area of tan δ versus T curves decreased with AlN content, which implied the damping capacity of the composite gradually decreased. The increase in T_g and decrease in damping were probably due to strong interaction between the AlN and epoxy matrix inhibiting the mobility of the epoxy chain. In addition, different theoretical models reported in the literature were used to predict the E, CTE, k, and D_k, and compared with the experimental data. Finally, suitable models were recommended in the present materials system. For the significant improvement of performance of epoxy, we can conclude that these composite materials may be promising for PCB substrate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1662–1674, 2007     

Polyvinyl chloride/ montmorillonite nanocomposites

Polyvinyl chloride (PVC)/organic-montmorillonite composites were prepared by melt intercalation. Their structures and properties were investigated with X-ray diffraction (XRD), differential scanning calorimetry (DSC) and mechanical testing. The results showed that PVC chains could be intercalated into the gallery of organically modified montmorillonite to form exfoliated PVC/organic-montmorillonite nanocomposites, and the glass transition temperatures of PVC/organic-montmorillonite composites were lower than that of neat PVC. However, the tensile strength, and both the Izod type and Charpy notched impact strengths of PVC/organic-montmorillonite nanocomposites were fitted with the linear expressions: t=535.07-6.39T _g, s _I=378.76-4.59T _g and s_C=276.29-3.59T _g, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Monitoring the formation of polystyrene/silica nanocomposites from vinyl triethoxysilane containing copolymers

Random copolymers of polystyrene-co-polyvinyl triethoxysilane (PS-co-PVTES) were prepared via semi-batch emulsion polymerization with different feed monomer compositions and evaluated as precursors of polystyrene (PS)/silica nanocomposites. Small-angle X-ray scattering (SAXS) profiles acquired from 20 °C to 180 °C showed that, at temperatures higher than glass transition temperature (T _g) of PS, the latex particles aggregate. On thermal annealing at 180 °C, silica-rich domains are formed, as corroborated by scanning electron microscopy. Infrared spectroscopy and differential scanning calorimetry analyses showed a reduction of the silanol concentration and an increase in the T _g value, respectively. The silica long domain spacing, measured by SAXS, depends on the concentration of vinyl triethoxysilane (VTES) in the feed; this value varied from 35 to 57 nm when the weight ratio of the monomers (styrene/VTES) was 50:50 and 90:10, respectively.     

Thermal properties of polystyrene nanocomposites formed from rigid intercalation agent‐treated montmorillonite

Polystyrene (PS)/clay nanocomposites were prepared with two different new intercalation organophilic clays, the phosphonium salt (APP) and the ammonium 4‐(4‐adamantylphenoxy)‐1‐butanamine (APB) salts, by emulsion polymerization technique. X‐ray diffraction and transmission electron microscopy were performed to characterize the layered structures of APB‐ and APP‐treated polymer–clay nanocomposites, and both resulted in exfoliated structures. Molecular weights of PS obtained from these nanocomposites are slightly lower than the virgin PS formed under similar polymerization conditions. Coefficient of thermal expansion showed approximately a 44–55% decrease for APB‐ and APP‐intercalated clay nanocomposites relative to the pure PS. Both T_g and thermal decomposition temperature of the PS component in the nanocomposite are higher than the virgin PS, implying that the presence of clay is able to enhance thermal stabilities of the PS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1781–1787, 2007     

Synthesis of poly(p‐phenylenediamine‐ co‐o‐aminophenol)/multi‐walled carbon nanotube composites by emulsion polymerization

Organic–inorganic composites composed of electrically conducting copolymer p‐phenylenediamine‐ co‐o‐aminophenol and carboxylic acid functionalized multi‐walled carbon nanotubes [poly(pPD‐co‐oAP)/c‐MWNTs] were prepared via in situ emulsion pathway using sodium dodecyl sulphate (SDS) as an emulsifier and potassium persulphate as an oxidant. Acid functionalized MWNTs were used as cores in the formation of tubular shells of the composites. TEM and FESEM analysis showed that a tubular layer of coated copolymer film of several nanometer thicknesses is present on the c‐MWNTs surfaces. FT‐IR spectra endorsed the formation of composites. TGA results indicated that the decomposition temperatures of composites were higher than the bare copolymer. UV‐visible absorption spectra of diluted colloidal dispersion of composites were similar to those of the bare copolymer. The composites were also confirmed by XRD and XPS. Room‐temperature conductivity increases with an increasing fraction of c‐MWNTs. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of styrene–acrylamide copolymer by surfactant‐free sonicated dynamic interfacial polymerization

This paper summarizes a study on emulsifier‐free ultrasonically assisted in situ dynamic interfacial emulsion copolymerization process of acrylamide and styrene. The resulting emulsions are stable and uniform for several months. Thermogravimetric analysis (TGA) curves and reaction conversion measurements have provided an important knowledge regarding the emulsifier‐free polymerization method. Solvent extractions (water, methanol, and xylene) have shown that the polymerization product is essentially a styrene–acrylamide copolymer. The copolymer produced is a block copolymer, PS‐b‐PAM, where each block contains small amounts of the other comonomer. The produced emulsions are film forming at room temperature in spite of the very high block T_gs, owing to a unique water plasticization effect of the polyacrylamide blocks. Some films prepared from the PS‐b‐PAM have resulted in clear and transparent films. The presented interfacial dynamic polymerization process is fast, reaching 81% conversion within 2 hr of sonication at 4°C (low temperature owing to molecular weight and kinetic considerations), and produces very stable PS‐b‐PAM emulsions. TGA was extensively used as an analytical tool for determination of the reaction parameters and composition of the acrylamide–styrene copolymers. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007     

Effect of nanoscale confinement on the glass transition temperature of free-standing polymer films: Novel,self-referencing fluorescence method

The effect of nanoscale confinement on the glass transition temperature, T_g, of freely standing polystyrene (PS) films was determined using the temperature dependence of a fluorescence intensity ratio associated with pyrene dye labeled to the polymer. The ratio of the intensity of the third fluorescence peak to that of the first fluorescence peak in 1-pyrenylmethyl methacrylate-labeled PS (MApyrene-labeled PS) decreased with decreasing temperature, and the intersection of the linear temperature dependences in the rubbery and glassy states yielded the measurement of T_g. The sensitivity of this method to T_g was also shown in bulk, supported PS and poly(isobutyl methacrylate) films. With free-standing PS films, a strong effect of confinement on T_g was evident at thicknesses less than 80–90 nm. For MApyrene-labeled PS with M_n = 701 kg mol⁻¹, a 41-nm-thick film exhibited a 47 K reduction in T_g relative to bulk PS. A strong molecular weight dependence of the T_g-confinement effect was also observed, with a 65-nm-thick free-standing film exhibiting a reduction in T_g relative to bulk PS of 19 K with M_n = 701 kg mol⁻¹ and 31 K with M_n = 1460 kg mol⁻¹. The data are in reasonable agreement with results of Forrest, Dalnoki-Veress, and Dutcher who performed the seminal studies on T_g-confinement effects in free-standing PS films. The utility of self-referencing fluorescence for novel studies of confinement effects in free-standing films is discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2754–2764, 2008     

Nanostructured latexes made by a sequential multistage emulsion polymerization

A series of linear and lightly crosslinked nanostructured latices was prepared by a sequential multistage semicontinuous emulsion polymerization process alternating styrene (S) and n‐butyl acrylate (BA) monomer feeds five times, that is ten stages, and vice versa, along with several control latices. Transmission electron micrographs of the RuO₄‐stained cross sections of nanostructured and copolymer latex particles and films showed that their particle morphologies were not very different from each other, but the nanostructured latex particles were transformed into a nanocomposite film containing both polystyrene (PS) and poly(n‐butyl acrylate) (PBA) nanodomains interconnected by their diffuse polymer mixtures (i.e. interlayers). The thermal mechanical behaviors of the nanostructured latex films showed broad but single T_gs slightly higher than those of their counterpart copolymer films. These single T_gs indicated that their major component phases were the diffuse interlayers and that they behaved like pseudopolymer alloys. The minimum film formation temperatures of nanostructured latices capped with PBA and PS, respectively, were 15 °C lower than and equal to those of their counterpart copolymer latices, but their T_gs were about 10 °C higher. Consequently, nanostructured latices enabled us to combine good film formation with high strengths for adhesives and coatings applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2826–2836, 2006     

Preparation of conductive polypyrrole (PPy) composites under supercritical carbon dioxide conditions

Electrically conductive composites were prepared via the chemical oxidative polymerization of the pyrrole monomer in polystyrene (PS) and zinc neutralized sulfonated polystyrene (Zn-SPS) films under supercritical carbon dioxide (SC-CO₂) conditions. The strong swelling effect of SC-CO₂ made polypyrrole (PPy) particles not only form on the surface, but also become incorporated into the film, resulting in a homogeneous structure with a relatively higher conductivity. By comparison, the composite prepared in aqueous solutions shows a skin-core structure and a conductivity of 3 to 4 orders of magnitude lower than that of the former due to the diffusion-controlled process of the pyrrole monomer. The percolation thresholds of PS/PPy and Zn-SPS/PPy composites were 6.2% and 2.7% of the volume fraction of PPy, respectively, much lower than the theoretically predicted value of 16%. Moreover, the conductive composites prepared under SC-CO₂ conditions showed higher thermal stability, especially in the high-temperature region. Translated from Chemical Journal of Chinese Universities, 2006, 27(4): 771–774 (in Chinese)     

Glass transition of polymer/single-walled carbon nanotube composite films

The glass-transition temperatures (T_g's) of nanocomposites of polystyrene (PS) and single-walled carbon nanotubes were measured in the bulk and in thin films with differential scanning calorimetry and spectroscopic ellipsometry, respectively. The bulk T_g of the nanocomposites increased by approximately 3 °C and became much broader than that of PS. For the nanocomposite films thinner than 45 nm, T_g decreased with decreasing film thickness [i.e., ΔT_g(nano) < 0]. This phenomenon also occurred in thin PS films, the magnitude of the depression in PS [ΔT_g(PS)] being somewhat larger. The film thickness dependence and the differences in the magnitude of ΔT_g in the two systems were examined in light of current theory, and a quantitative comparison was made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3339–3345, 2003     

The effect of silica morphology on properties of PVA/silica nano-composites

Two kinds of poly(vinyl alcohol)(PVA)-silica composites were prepared with different methods. One composite was prepared by directly mixing PVA with 80 nm silica nano-particles which were made from tetraethoxysilane(TEOS). The another was obtained by the mixing PVA and hydrolyzed TEOS in the presence of acid-catalyst. The properties of the two PVA/silica hybrids were characterized by means of scanning electron microscopy(SEM), UV-Visible spectroscopy,solubility tests, limiting oxygen index(LOI) test, tensile test and dynamical mechanical analysis(DMA), respectively. The results indicate that PVA-TEOS composites(PT for short) display more transparency than PVA-silica nano-particles hybrids(PS for short). At the same time, The PT composites presented more excellent performance than PS in water resistance, fire resistance and mechanical properties. Moreover, the Tg of PT increased with increasing TEOS content, while that of PS decreased.     

Model filled polymers. IX. Synthesis of uniformly crosslinked polystyrene microbeads

Monodisperse sized crosslinked polystyrene (PS) beads prepared by reaction of styrene (S) and divinylbenzene (DVB), in batch emulsion copolymerization in the absence of emulsifiers, are not uniformly crosslinked, because DVB is more reactive than S. For copolymerization of 1 to 10 mol % DVB and S, within each crosslinked PS microbead, the crosslink density varies by a factor exceeding two and decreases with increased conversion. A semicontinuous copolymerization, involving incremental additions of DVB, produces uniformly crosslinked PS beads. For both copolymerization techniques, T_g correlates well with crosslink density and PS beads are spherical and monodisperse in size. © 1992 John Wiley & Sons, Inc.     

The Effect of Weight Fraction of H-PDMS on the Latex Membrane and the Stability of Composite Emulsion of H-PDMS/Acrylate

High hydrogen-containing polymethylsiloxane(H-PDMS)/polyacrylate composite emulsion was synthesized by a drop-adding method for monomer emulsion. The effects of weight fraction of H-PDMS on the stability of composite emulsion, water resistance and heat-aging resistance of the latex membrane have been investigated. The TEM demonstrated that latex particles are a core-shell structure. By analyzing the spectrums of FTIR and ¹H-NMR, it can be indicated that H-PDMS had reacted with acrylate monomer resulting chemical bond formation. The core-shell structure and chemical bond play an important role to restrain phase separation of composite emulsion and enhance the stability of the emulsion. By analyzing the surface tension, apparent viscosity and morphological structure, the results showed that the stable composite emulsion system can be obtained in which the average latex particle size was smaller than 90 nm when weight fraction of H-PDMS is below 16% (based on the weight of acrylate monomer), the stable emulsion system can be obtained in which the average latex particle size becomes larger than 90 nm when the weight fraction of H-PDMS is above 20% of the acrylate monomer. The DSC demonstrated that the T_g of pure polyacrylate is 49°C, and there is only one T_g (35°C) when the weight fraction of H-PDMS is 13%, but there are two T_g (15°C and 25°C) when the weight fraction of H-PDMS is 16%. In addition, the water resistance and heat-aging resistance of composite latex membrane enhanced gradually with the increase of amount of H-PDMS.     

Phase separation dynamics of a poly(vinyl methyl ether)/polystyrene (PVME/PS) blend studied by ultrafast differential scanning calorimetry

In this work, ultrafast differential scanning calorimetry (UFDSC) is used to study the dynamics of phase separation. Taking poly(vinyl methyl ether)/polystyrene (PVME/PS) blend as the example, we firstly obtained the phase diagram that has lower critical solution temperature (LCST), together with the glass transition temperature (T_g) of the homogeneous blend with different composition. Then, the dynamics of the phase separation of the PVME/PS blend with a mass ratio of 7:3 was studied in the time range from milliseconds to hours, by the virtue of small time and spatial resolution that UFDSC offers. The time dependence of the glass transition temperature (T_g) of PVME‐rich phase, shows a distinct change when the annealing temperature (T_a) changes from below to above 385 K. This corresponds to the transition from the nucleation and growth (NG) mechanism to the spinodal decomposition (SD) mechanism, as was verified by morphological and rheometric investigations. For the SD mechanism, the temperature‐dependent composition evolution in PVME‐rich domain was found to follow the Williams–Landel–Ferry (WLF) laws. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1357–1364