Growth of the Au-induced c(8 × 2) structure on vicinal Ge(001)

We have studied the formation of Ge(001) c(8 × 2)–Au surfaces on vicinal samples by scanning tunneling microscopy. The vicinal samples are tilted 1° toward [110]. The c(8 × 2)–Au surface is prepared by depositing 0.75 ± 0.05 ML of Au onto a germanium surface held at 800 K. The anisotropy introduced by the atomic steps of the vicinal surface and the preferential etching of S_B steps during Au deposition is sufficient to introduce a preferred growth direction for the c(8 × 2)–Au phase. The result is a sample on which 78% of the surface is populated by Au-induced chains oriented parallel to the step direction. These parallel Ge(001) c(8 × 2)–Au domains are separated by single or multiple height D_A steps (0.28 nm high).     

Reversible and irreversible reactions of three oxygen precursors on InAs(0 0 1)-(4 × 2)/c(8 × 2)

The substrate reactions of three common oxygen sources for gate oxide deposition on the group III rich InAs(0 0 1)-(4 × 2)/c(8 × 2) surface are compared: water, hydrogen peroxide (HOOH), and isopropyl alcohol (IPA). Scanning tunneling microscopy reveals that surface atom displacement occurs in all cases, but via different mechanisms for each oxygen precursor. The reactions are examined as a function of post-deposition annealing temperature. Water reaction shows displacement of surface As atoms, but it does not fully oxidize the As; the reaction is reversed by high temperature (450 °C) annealing. Exposure to IPA and subsequent low-temperature annealing (100 °C) show the preferential reaction on the row features of InAs(0 0 1)-(4 × 2)/c(8 × 2), but higher temperature anneals result in permanent surface atom displacement/etching. Etching of the substrate is observed with HOOH exposure for all annealing temperatures. While nearly all oxidation reactions on group IV semiconductors are irreversible, the group III rich surface of InAs(0 0 1) shows that oxidation displacement reactions can be reversible at low temperature, thereby providing a mechanism of self-healing during oxidation reactions.     

Ab initio study of Yb on the Ge(111)–(3 × 2) and Si(111)–(3 × 2) surfaces

The surface reconstruction, 3 × 2, induced by Yb adsorption on a Ge (Si)(111) surface has been studied using first principles density-functional calculation within the generalized gradient approximation. The two different possible adsorption sites have been considered: (i) H₃ (this site is directly above a fourth-layer Ge (Si) atom) and (ii) T₄ (directly above a second-layer Ge (Si) atom). We have found that the total energies corresponding to these binding sites are nearly the same, indeed for the Yb/Ge (Si)(111)–(3 × 2) structure the T₄ model is slightly energetic by about 0.01 (0.08) eV/unitcell compared with the H₃ model. In particular for the Ge sublayer, the energy difference is small, and therefore it is possible that the T₄, H₃, or T₄H₃ (half of the adatoms occupy the T₄ adsorption site and the rest of the adatoms are located at the H₃ site) binding sites can coexist with REM/Ge(111)–(3 × 2). In contrast to the proposed model, we have not determined any buckling in the Ge = Ge double bond. The electronic band structures of the surfaces and the corresponding natures of their orbitals have also been calculated. Our results for both substrates are seen to be in agreement with the recent experimental data, especially that of the Yb/Si(111)–(3 × 2) surface.     

As-rich (2 × 2) surface reconstruction on GaAs(111)A

The atomic structures and the formation processes of the Ga- and As-rich (2×2) reconstructions on GaAs(111)A have been studied. The Ga-rich (2×2) structure is formed by heating the As-rich (2×2) phase, but the reverse change hardly occurs by cooling the Ga-rich surface under the As₂ flux. Only when the Ga-rich (2×2) surface covered with amorphous As layers was thermally annealed, the As-rich (2×2) surface is formed. The As-rich (2×2) surface consists of As trimers located at a fourfold atop site of the outermost Ga layer, in which the rest-site Ga atom is replaced by the As atom.     

Acetylene adsorption on silicon (100)-(4 × 2) revisited

The aim of this work is to revisit the problem of acetylene adsorption on silicon (100). Extending previous theoretical work and including van der Waals forces explicitly in the simulations we remove existing ambiguities about the adsorption sites. The simulated adsorption energies and scanning tunneling microscopy contours are in good agreement with experimental data, they support the interpretation of a two-dimer feature at the surface as resulting from the adsorption of two individual molecules. It is also found that the simulated apparent heights agree with experimental values, if the actual bandgap of silicon is taken into account.     

Real time dynamics of Si magic clusters mediating phase transformation: Si(111)-(1 × 1) to (7 × 7) reconstruction revisited

Using Scanning Tunneling Microscope (STM), we show that the surface undergoes phase transformation from disordered “1 × 1” to (7 × 7) reconstruction which is mediated by the formation of Si magic clusters. Mono-disperse Si magic clusters of size ~ 13.5 ± 0.5 Å can be formed by heating the Si(111) surface to 1200 °C and quenching it to room temperature at cooling rates of at least 100 °C/min. The structure consists of 3 tetra-clusters of size ~ 4.5 ? similar to the Si magic clusters that were formed from Si adatoms deposited by Si solid source on Si(111)-(7 × 7) [1]. Using real time STM scanning to probe the surface at ~ 400 °C, we show that Si magic clusters pop up from the (1 × 1) surface and form spontaneously during the phase transformation. This is attributed to the difference in atomic density between “disordered 1 × 1” and (7 × 7) surface structures which lead to the release of excess Si atoms onto the surface as magic clusters.     

The electronic structures of commensurate Ru(0001)–(3 × 3)–4Kr and Ru(0001)–(5 × 5)–Kr using density functional theory

We have calculated the minimum energies for each of three positionings of the adatom unit cells for Ru(0001)–(3 × 3)–4Kr (high Kr coverage) and for Ru(0001)–(5 × 5)–Kr (low Kr coverage). The differences between the results for the low and high-coverage cases may clarify puzzles posed by the experimental results of Narloch and Menzel. The low-coverage solution converges to a structure having Kr in the top site at a height of 3.09 Å above the substrate with the adsorption energy 185 meV. In the high-coverage case, adatom unit cells with a corner Kr at top, fcc hollow, and hcp hollow locations are found to have nearly the same adsorption energy of 175 meV. The height of the corner atom above the substrate is found to be 3.35, 3.54, and 3.50 Å for the top, fcc hollow and hcp hollow sites, respectively. These results are explained by demonstrating that there is an enhancement of the substrate electronic density of states at krypton orbital energies in the low-coverage case.     

Selective adsorption of coronene on Si(1 1 1)-(7 × 7)

The adsorption of coronene (C₂₄H₁₂) on the Si(1 1 1)-(7 × 7) surface is studied using scanning tunneling microscopy (STM). Upon room temperature submonolayer deposition, we find that the coronene molecules preferentially adsorb on the unfaulted half of the 7 × 7 unit cell. Molecules adsorbed on different sites can be induced to move to the preferential sites by the action of the tip in repeated image scans. Imaging of the molecules is strongly bias dependent, and also critically depends on the adsorption site. We analyze the results in terms of differential bonding strength for the different adsorption sites and we identify those substrate atoms which participate in the bonding with the molecule.     

Cation-anion mixed-dimer structure of Al-induced (2 × 4) reconstruction on InAs(001)

Adsorption of Al atoms on the As-stabilized InAs(001)—(2 × 4) surface induces the formation of the Al-stabilized (2 × 4) reconstruction. The Al-stabilized (2 × 4) surface has mixed In–As dimer at the outermost layer with the Al atoms being incorporated into the subsurface layers. Heating of the Al-stabilized (2 × 4) surface further promotes the diffusion of Al into deeper layers, which results in the formation of the In-rich (4 × 2) structure with the ζa structure.     

SU(3)×SU(3) symmetry breaking, (8, 8) Model and theη→3π decay

It is shown that the (8, 8) model and explicitηπ ⁰ mixing successfully explain theη→3π decay width whereas the decay width calculated from the mass difference is about one order less than the experimental value.     

Asymmetric <Emphasis Type="Italic">c</Emphasis>(4×4) → γ(2×4) reconstruction phase transition on the (001)GaAs surface

The c(4×4) → γ(2×4) reconstruction phase transition on the (001)GaAs surface is studied experimentally. It is shown that it is a first-order phase transition. The phase transition is found to exhibit a highly asymmetric hysteresis. The difference between the direct and inverse runs of the hysteresis is explained in terms of the mean field theory of an adsorption-induced phase transition by the substantial contribution of lateral multiparticle interactions in the adsorbate.     

Tin-stabilized (1 × 2) and (1 × 4) reconstructions on GaAs(100) and InAs(100) studied by scanning tunneling microscopy,photoelectron spectroscopy,and ab initio calculations

Tin (Sn) induced (1 × 2) reconstructions on GaAs(100) and InAs(100) substrates have been studied by low energy electron diffraction (LEED), photoelectron spectroscopy, scanning tunneling microscopy/spectroscopy (STM/STS) and ab initio calculations. The comparison of measured and calculated STM images and surface core-level shifts shows that these surfaces can be well described with the energetically stable building blocks that consist of Sn–III dimers. Furthermore, a new Sn-induced (1 × 4) reconstruction was found. In this reconstruction the occupied dangling bonds are closer to each other than in the more symmetric (1 × 2) reconstruction, and it is shown that the (1 × 4) reconstruction is stabilized as the adatom size increases.     

Surface dimer formation on GaAs(001)-c(2 × 8)(2 × 4) studied by X-ray photoelectron diffraction

We have used X-ray photoelectron diffraction to investigate the formation of As dimers on the $\text{c}\text{(2 × 8)}\text{(2 × 4)}$ reconstructed surface of GaAs(001). Comparison of experiment with simulations employing single scattering theory suggests that dimers form with a bond length of approximately twice the covalent radius of As. This finding represents the first application of the X-ray photoelectron diffraction technique to the study of surface reconstructions.     

Atomic and nanostructures of monolayer c(2 × 2)NiN on Cu(0 0 1)

Structures of monolayer nickel nitride (NiN) on Cu(0 0 1) surface are studied by X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Formations of Ni–N chemical bonds and NiN monolayer at the surface are confirmed by XPS on the N-adsorbed Cu(0 0 1) surfaces after Ni deposition and subsequent annealing to 670 K. A c(2 × 2) structure is always observed in the LEED patterns, which is a quite contrast to the (2 × 2)p4g structure observed usually at the N-adsorbed Ni(0 0 1) surface. Atomic images by STM indicate the mixture of Ni–N and Cu–N structures at the surface. Density of the trenches on the N-saturated surface decreases and the grid pattern on partially N-covered surfaces becomes disordered with increasing the Ni coverage. These results are attributed to the decrease of the surface compressive stress at the N-adsorbed Cu surface by mixing Ni atoms.     

First principles calculations of the Sc adsorption on Si(001)-c(2 × 4)

We have investigated the energetics and the atomic structure of the adsorption of Sc on the Si(001)-c(2 × 4) surface using first principles total energy calculations, within the periodic density functional. The Sc adsorption has been studied at high symmetry sites considering different concentrations. We have first explored the one atom case and then increased the coverage up to a 0.25 of a monolayer of Sc. For the adsorption of one Sc atom we have obtained that the most stable configuration corresponds to the adsorption in the trench between two Si dimers, at the C1 (cave) site. The interaction of the adsorbed Sc with the Si dimers induces a decrease of the dimers buckling amplitude. On the other hand Si dimers without interaction with the adsorbate have buckling amplitudes similar to those of the clean Si surface. When the Sc coverage is increased to two Sc atoms, the most stable structure corresponds to the adsorption at two consecutive V (valley-bridge) sites along the trench between Si dimers, resulting in the weakening of some of the Si dimers bonds. This result indicates that the formation of one dimensional Sc chains on the silicon surface is energetically and kinetically favorable.     

Strained c(4 × 2) CoO(1 0 0)-like monolayer on Pd(1 0 0): Experiment and theory

We report on an interface-stabilized strained c(4 × 2) phase formed by cobalt oxide on Pd(1 0 0). The structural details and electronic properties of this oxide monolayer are elucidated by combination of scanning tunneling microscopy data, high resolution electron energy loss spectroscopy measurements and density functional theory. The c(4 × 2) periodicity is shown to arise from a rhombic array of Co vacancies, which form in a pseudomorphic CoO(1 0 0) monolayer to partially compensate for the compressive strain associated with the large lattice mismatch (～9.5%) between cobalt monoxide and the substrate. Deviation from the perfect 1:1 stoichiometry thus appears to offer a common and stable mechanism for strain release in Pd(1 0 0) supported monolayers of transition metal rocksalt monoxides of the first transition series, as very similar metal-deficient c(4 × 2) structures have been previously found for nickel and manganese oxides on the same substrate.     

The electronic properties of Co nanowires on Cu(110)-p(2 × 3)N

We present the first measurements of the differential conductance of Co wires grown on top of Cu(110)-p(2 × 3)N (Cu₃N). We apply scanning tunneling spectroscopy (STS) in constant height and constant current mode to access the electronic density of states of the sample over a wide energy range. All measurements have been performed at 7 K. Our study reveals that the differential conductance of the Co wires is very similar to that of Cu₃N. Spectra of the differential conductance measured on the Co wires and on Cu₃N reveal that both systems exhibit the same characteristic features near + 1.8V and + 3.5 V.