Mechanical property and corrosion resistance of zirconia/polydopamine nanocomposite multilayer films fabricated via a novel non‐electrostatic layer‐by‐layer assembly technique

Zirconia/polydopamine (ZrO₂/PDA) nanocomposite multilayer films were constructed on Si substrate via a novel nonelectrostatic layer‐by‐layer (NELBL) assembly technique. The building block of this technique is the newly reported dopamine molecule, which can be attached to almost all material surfaces and undergo oxidation‐polymerization to form PDA layers; more importantly, the outer hydroxyl groups of the PDA layer can chelated with certain inorganic oxide nanoparticles to generate oxide films. Thus, ZrO₂/PDA nanocomposite multilayer films were fabricated by sequential NELBL deposition of PDA and ZrO₂ nanoparticles. The formation of the ZrO₂/PDA nanocomposite multilayer films was monitored by the water contact angle (WCA) and ellipsometric thickness measurements, while the microstructure of the fabricated films was analyzed by means of atomic force microscope (AFM), field emission scanning electron microscope (FESEM), X‐ray photoelectron spectrum (XPS), and X‐ray diffraction (XRD) analysis. The mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers were found to be greatly enhanced as compared with that of the annealed homogeneous ZrO₂ film. The better mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers than the annealed homogeneous ZrO₂ film may be closely related to their special microstructure. Namely, the organic–inorganic hybrid microstructure of the annealed ZrO₂/PDA nanocomposite multilayers may largely account for the increased nanohardness and corrosion resistance. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of polypyrrole (PPy)-derived polymer/ZrO2 nanocomposites

New polypyrrole (PPy)-derived polymer/ZrO₂ nanocomposite materials are prepared by single-step oxidative polymerization of pyrrole (Py) and/or N-methylpyrrole (mPy) in the presence of HCl-functionalized ZrO₂ nanoparticles and ammonium persulfate. The physicochemical features of the PPy–ZrO₂, poly(Py-co-mPy)–ZrO₂ and PmPy–ZrO₂ hybrids were analyzed by XPS, FTIR, XRD and UV–Vis techniques. To explore the advantages of these nanocomposites for potential applications, their thermal, conductive and electrochemical properties were investigated. The characterization reveals that a chemical bonding, based on electrostatic interactions, is established between the polymers and the ZrO₂ nanoparticles. Interestingly, it is found that the growth of polymer on the surface of Cl-functionalized ZrO₂ becomes more significant as the Py moiety (–NH– species) content in the polymer increases. The thermal stability and conductivity of the polymers increase by hybridization with the ZrO₂ nanoparticles. This is assigned to the affective interaction of the polymers with the ZrO₂ nanoparticles. Particularly, the resulting nanocomposites keep high conductivities, ranging between 0.323 and 0.929 S cm⁻¹. Finally, voltammetric characterization shows that the PPy–ZrO₂ and poly(Py-co-mPy)–ZrO₂ nanocomposites are electroactive, thus demonstrating their capability for electrochemical applications. These results highlight the great influence of the nanoparticle interface and the nature of monomer on the nanocomposite formation and properties.

     

ZrO2纳米粒子原位杂化PVDF膜的制备及其抗污染性能

针对传统聚合物膜抗污染性差的问题,本文从杂化膜结构设计出发,提出将ZrO2纳米粒子的原位制备和聚偏氟乙烯(PVDF)相转化成膜过程有机结合的制膜新方法.该方法将阴离子交换树脂引入到N,N-二甲基甲酰胺(DMF)中,以氧氯化锆为原料,利用阴离子交换树脂提供的―OH与无机盐的阴离子进行交换,得到ZrO2纳米粒子均匀分散的N,N-二甲基甲酰胺溶胶体系.随后将PVDF聚合物溶解到所得的N,N-二甲基甲酰胺溶胶体系中,获得均一、透明的铸膜液.利用X射线光电子能谱(XPS)和透射电子显微镜(TEM)对杂化膜中锆的存在状态和分散性能进行了表征.结果表明,ZrO2纳米粒子均匀分散在PVDF基体中,并且形成的纳米粒子的粒径约为10-20 nm.通过粘度、分相速度和膜形态的测定,研究了成膜机理.结果表明,ZrO2纳米粒子的引入加速了铸膜液成膜过程的分相速度.杂化膜的亲水性能通过接触角测定仪进行了评价.并选择以牛血清蛋白为代表模拟污染物,考察了杂化超滤膜的抗污染性能.结果表明,原位形成的ZrO2纳米粒子显著提高了膜的亲水性,减少了膜对蛋白质的吸附.这种将ZrO2纳米粒子的原位制备和PVDF相转化成膜过程有机结合的制膜新方法在有机-无机杂化膜的制备领域具有显著意义.     

Polyvinylpyrrolidone/ZrO<Subscript>2</Subscript>-based sol–gel films applied in highly reflective mirrors for inertial confinement fusion

Polyvinylpyrrolidone (PVP)/ZrO₂-based hybrid thin films, with suitable properties for application in the high power lasers, have been prepared combining the advantages of both the sol–gel route and the organic-inorganic hybrid materials. By virtue of light scattering analysis, the chemical composition of the reaction system was fully optimized, endowing the films with good optical properties and high laser-induced damage threshold (LIDT). Light scattering studies also provided valuable structural information about the hybrid sols, which offered a better understanding of the structure and performance of the hybrid films. Our experiments showed that, in the hybrid sols, the incomplete substitution for the chelating ligands by the hydroxyls might considerably conceal and weaken the effect of PVP on the nucleation and growth of ZrO₂ particles. Thus, the incorporation of PVP only resulted in slight decreases in the refractive index and LIDT of the films. By energy relaxation through their flexible polymer chains, however, the addition of PVP could easily enhance the stress compatibility between the high- and low-index layers and then facilitate the deposition of the multi-layer highly reflective mirrors.     

Synthesis and characterization of silica‐graft‐polystyrene hybrid nanoparticles: Effect of constraint on the glass‐transition temperature of spherical polymer brushes

The effect of the chain constraint on the glass‐transition temperature of polystyrene (pS) was studied in the context of polymer tethering to curved surfaces. The synthesis and characterization of silica‐graft‐polystyrene (SiO₂‐g‐pS) hybrid nanoparticles is reported. Silica nanoparticles possessing covalently bound pS chains were prepared by the atom transfer radical polymerization of styrene from functionalized colloidal surfaces. These hybrid nanoparticles serve as interesting examples of spherical polymer brushes, as a high density of grafted pS was achieved on the inorganic colloid. The confirmation of a brushlike extension of immobilized chains in a good solvent was obtained with dynamic light scattering in toluene of SiO₂‐g‐pS colloids possessing various molar masses of tethered pS. The solid‐state morphology of SiO₂‐g‐pS ultrathin films was assessed with transmission electron microscopy, and this confirmed that the silica colloids were well‐dispersed in a matrix of the tethered polymer. Differential scanning calorimetry was used to study the effects of tethering and chain immobilization on the glass‐transition temperature of pS. The measured glass‐transition temperature of annealed bulk films of the hybrid nanoparticles was elevated with respect to the value for pure bulk pS. The enhancements ranged from 13 to 2 K for SiO₂‐g‐pS brushes possessing tethered pS with number‐average molecular weights of 5230 and 32,670 g/mol, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2667–2676, 2002     

Metal Nanoparticle/Polymer Hybrid Particles: The Catalytic Activity of Metal Nanoparticles Formed on the Surface of Polymer Particles by UV-Irradiation

Summary: Polymer particles decorated with metal nanoparticles were prepared by UV-irradiation of polystyrene latex particles incorporating polymethylphenylsilane (PS/PMPS) and P[S-co-NIPAM]/PMPS particles (NIPAM: N-isopropyl acrylamide) in the presence of metal salts. The metal nanoparticle/polymer hybrid particles were used as a catalyst for the reduction of 4-nitrophenol with NaBH₄. The Pd- and Ag-P(S-co-NIPAM)/PMPS hybrid particles had larger metal nanoparticles and the lower catalytic activity than those of Pd- and Ag-PS/PMPS, respectively. The surface functional group of the polymer particles affected the formation of the metal nanoparticles and their catalytic activity.     

Sol-Gel Synthesis and Phase Evolution Behavior of Sterically Stabilized Nanocrystalline Zirconia

Nanocrystalline as well as submicron sized, non-agglomerated, spherical ZrO₂ particles have been successfully synthesized using the sol-gel technique utilizing hydroxypropyl cellulose (HPC) as a polymeric steric stabilizer. The effect of various parameters such as the ratio of molar concentration of water and alkoxide (R), the molar concentration [HPC] and the molecular weight (MW_HPC) of HPC polymer as well as the calcination temperature on ZrO₂ nanocrystallites size and their phase evolution behavior is systematically studied. The phase evolution behavior of nanocrystalline ZrO₂ is explained and correlated with the adsorption behavior of HPC polymer on ZrO₂ nanoparticles surface, which is observed to be a function of R, [HPC], MW_HPC and the calcination temperature. Optimum synthesis parameters for obtaining 100% tetragonal phase in nanocrystalline ZrO₂ are identified for the present sol-gel method of synthesizing nanoparticles.     

Characterization and corrosion resistance of organically modified silicate/MO2 (M = Zr,Ti, or Ce) hybrid coatings on a 6061‐T6 aluminum alloy

Hybrid coatings based on organically modified silicate (Ormosil)/ZrO₂ (0–1.0 wt %) and Ormosil/MO₂ (M = Ti or Ce) were synthesized through a sol–gel technique. Tetraethylenepentamine, 3‐glycidoxypropyltrimethoxysilane, tetraethoxysilane, and MO₂ (M = Zr, Ti, or Ce) metallic particle were used as precursors for the hybrid coatings. These hybrid films were deposited via spin coating onto an aluminum alloy to improve the corrosion protection. The effects induced by the ZrO₂ content and the metallic particle type on the chain dynamics, thermal stability, and corrosion performance of the coated samples were investigated. The rotating‐frame spin–lattice relaxation times and scale of the spin–diffusion path length indicated that the configuration of the hybrid films was highly crosslinked and dense and adhered to the aluminum alloy substrates. The thermal stability and the apparent activation energy, evaluated by van Krevelen's method, of the hybrid coatings depended on the ZrO₂ content and on the metallic particle type. Potentiodynamic and salt‐spray analysis revealed that the hybrid films provided exceptional barrier and corrosion protection in comparison with untreated aluminum alloy substrates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 335–342, 2006     

Distribution of zirconia nanoparticles in the matrix of poly(4,4′-oxydiphenylenepyromellitimide)

Poly(4,4??-oxydiphenylenepyromellitimide) is used as a polymer matrix for incorporation of zirconia nanoparticles with different compositions (ZrO₂ and Y_0.03Zr_0.97O_1.985), sizes (20 ± 5 and 10 ± 2 nm), and morphologies (spheres, hollow spheres, rods). The nanoparticles are incorporated during the synthesis of poly(amido acid), a prepolymer of polyimide, and ZrO₂ nanoparticles are pretreated with organosilicon compounds (tetraethoxysilane, ??-aminopropyltriethoxysilane, and 3-(trimethoxysilyl)propyl methacrylate). The effect of surface modification of ZrO₂ nanoparticles on their distribution in poly(4,4??-oxydiphenylenepyromellitimide), depending on the type of the organosilicon compound as well as on the dispersity, shape, and chemical composition of particles, is studied.     

Assembly of Graphene Nanosheets and SiO2 Nanoparticles Towards Transparent,Antireflective, Conductive,and Superhydrophilic Multifunctional Hybrid Films

A new approach for the fabrication of transparent, antireflective, conductive and superhydrophilic multifunctional hybrid films through the layer‐by‐layer (LbL) assembly of reduced graphene oxide (RGO) nanosheets and SiO₂ nanoparticles is reported. The RGO nanosheets, SiO₂ nanoparticles and films were characterized by means of transmission electron microscopy, UV/Vis absorption spectrophotometry, Raman spectroscopy, atomic force microscopy, contact angle/interface system, and a four‐point probe. It was found that the graphene/SiO₂ hybrid films exhibited a significant increase in transmittance as compared with RGO films. The optical, electronic and wetting properties of hybrid films could be manipulated by rational design of the film structure and variation of the cycle number of the LbL assembly. The obtained transparent, conductive, and superhydrophilic graphene/SiO₂ hybrid films showed excellent antireflective, antistatic, and antifogging behaviors. The remarkable performance could be attributed to the combination of electrical conductivity of RGO nanosheets and superhydrophilic antireflective surface derived from SiO₂ nanoparticles.     

Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability

Poly(l-lactic acid)-TiO₂ nanoparticle nanocomposite films were prepared by incorporating surface modified TiO₂ nanoparticles into polymer matrices. In the process of preparing the nanocomposite films, severe aggregation of TiO₂ nanoparticles could be reduced by surface modification by using carboxylic acid and long-chain alkyl amine. As a result, the nanocomposite films with high transparency, similar to pure PLA films, were obtained without depending on the amount of added TiO₂ nanoparticles. A TEM micrograph of the nanocomposite films suggests that the TiO₂ nanoparticles of 3-6 nm in diameter were uniformly dispersed in polymer matrices. Photodegradation of PLA-TiO₂ nanoparticle nanocomposite films was also investigated. The results showed that nanocomposite films could be efficiently photodegraded by UV irradiation in comparison with pure PLA.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Synthesis and Properties of ZrO2 Films Dispersed With Au Nanoparticles

Au nanoparticles dispersed ZrO₂ thin films were prepared from two precursors HAuCl₄·4H₂O and ZrOCl₂·8H₂O in air. The structural properties and size of Au particle in ZrO₂ film were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface analysis with atomic force microscopy (AFM) showed the effect of monoethanolamine on preventing the migration of Au particles to the surface. The absorption peak of Au particles by the surface plasma resonance was observed and the red shift of absorption peak was discussed.     

Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

Synthesis of well-defined, polymer-grafted silica nanoparticles via reverse ATRP

The surface grafting onto ultrafine silica via reverse ATRP of methyl methacrylate initiated by peroxide groups introduced onto the surface and conventional ATRP of Styrene initiated by the hybrid nanoparticles were investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polymer layer. The polymerization was closely controlled in solution at quite low temperature such as 70 °C. In both cases, linear kinetic plots, linear plots of molecular weight (M_n) versus conversion, in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M_w/M_n) for the grafted polymer samples were observed. Hydrolysis of silica cores by hydrofluoric acid treatment enabled characterization of cleaved polymer using GPC. Ultrathin films of hybrid nanoparticles were examined using TEM and AFM.     

Morphology and properties of waterborne adhesives made from hybrid polyacrylic/montmorillonite clay colloidal dispersions showing improved tack and shear resistance

The morphology and adhesive properties of waterborne films from n-butyl acrylate/methyl methacrylate/montmorillonite clay hybrid polymer latexes which were synthesized by miniemulsion polymerization in the presence of a reactive organoclay ((2-methacryloylethyl) hexadecyldimethylammonium modified montmorillonite, CMA16) were investigated. It was found by cryo-TEM analysis that the hybrid dispersions were a mixture of colloidal particles composed of a small fraction of free montmorillonite clay platelets, polymer latex particles, polymer particles to which one or more clay platelets where adhered onto its surface and a fraction of colloidal material consisted of a clay platelet with a polymer lob adhered to either side, in other words hybrid particles with a dumbbell-like morphology. The films made from these waterborne hybrid dispersions presented a homogeneous dispersion of the clay platelets and exfoliated morphology. The shear adhesion failure temperature (SAFT) and shear resistance of the hybrid latex films synthesized with CMA16 were better than those prepared with a commercial clay (Cloisite 30B), but presented a liquid-like probe-tack performance. When allyl methacrylate (AMA) was added in the formulation, SAFT and shear resistance improved, but the film had a very low energy of adhesion due to the excessively crosslinked matrix. In order to reduce crosslink density and thus improve the adhesion energy, small amounts of chain transfer agent, in this case n-dodecyl mercaptan (n-DDM), were used in the miniemulsion polymerization process. Adhesive films made from these waterborne hybrid dispersions showed excellent SAFT and shear resistance, and good energy of adhesion.      

Preparation,surface morphology,and optical properties of indium(III) oxide nanoparticles by thermolysis of indium–poly(vinyl alcohol) coordination polymer

First report on the preparation of well-dispersed, indium(III) oxide (In₂O₃) nanoparticles with 22–35?nm size by polymer thermolysis is presented. Indium–poly(vinyl alcohol) (PVA) coordination polymer films were prepared by ‘solution casting technique’ from the homogeneous aqueous solution of coordination polymer prepared using PVA and indium(III) nitrate as starting materials; subsequently the films were calcined at 550?°C to yield In₂O₃ nanoparticles. Both indium–PVA coordination polymer that served as the precursor and the titled nanoparticles were characterized by Fourier transform-infrared spectroscopy, photoluminescence (PL), powder X-ray diffraction (XRD), transmission electron microscopy, and thermal analysis. Room temperature PL spectra of the prepared indium oxide nanoparticles showed intense blue emissions around 360, 410 and 430?nm, characteristic of indium oxide nanoparticles due to oxygen vacancies. The lower energy PL emission decreases with an increase of indium(III) content in the precursor. The size of the nanoparticles calculated from line broadening of XRD pattern (cubic; JCPDS: 06-0416) was found to be around 24?nm. The average particle size of the synthesized nanoparticles increased with metal ion content in the precursor coordination polymer.     

Preparation of ZrO2/silicone hybrid materials for LED encapsulation via in situ sol‐gel reaction

Organic silicones have been used as encapsulant materials for light‐emitting diodes (LEDs) for many years, while their performances need to be improved in order to satisfy the requirements of high‐power LEDs. A ZrO₂/silicone hybrid resin (ZHR) was synthesized for LEDs encapsulation by in situ sol‐gel reactions. The oligosiloxane was synthesized as polymeric matrix by nonaqueous sol‐gel condensation using diphenylsilanediol (DPSD), vinyltrimethoxysilane (VTMS), and 3‐methacryloxy propyl trimethoxysilane (MPTMS) as monomers. Then zirconium propoxide was added into this polymeric matrix to be hydrolyzed to obtain the hybrid resin with a uniform dispersion of ZrO₂ nanoparticles. The Si–O–Zr covalent bond was detected and benefited for excellent dispersibility of the ZrO₂ nanoparticles and the well compatibility between organic and inorganic phases. The cured ZHR with 5 wt% ZrO₂ content showed high light transmittance (greater than 80% in visible light range), high refractive index (=1.56), and high thermal stability (no yellowing at 150°C for 240 hours). The luminous flux of the LED chip with ZHR encapsulant was 10% higher than that of the pure silicone resin, suggesting that ZHR has great application potential in the field of LED packaging.     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.