Ni5, Ni8, and Ni10 clusters with 2,6-diacetylpyridine-dioxime as a ligand

In the present work, novel coordination possibilities for the system dapdoH(2)/Ni(II) (dapdoH(2) = 2,6-diacetylpyridine-dioxime) have been explored. Depending on the starting reagents and solution conditions, several clusters with nuclearities ranging from Ni(5) to Ni(10) were achieved and structurally characterized, namely, [Ni(5)(R-COO)(2)(dapdo)(2)(dapdoH)(2)(N(CN)(2))(2)(MeOH)(2)] in which R-COO(-) = benzoate (1) or 3-chlorobenzoate (2), [Ni(8)(dapdo)(4)(NO(3))(4)(OH)(4)(MeOH)(4)] (3), and [Ni(10)(dapdo)(8)(N(CN)(2))(2)(MeO)(MeOH)](NO(3)) (4). For the first time, pentadentate coordination for the dapdo(2-) ligand has been established. All compounds show a combination of square-planar and octahedrally coordinated nickel atoms. According to the Ni(2)(sp)Ni(3)(Oh) (1 and 2), Ni(4)(sp)Ni(4)(Oh) (3), and Ni(4)(sp)Ni(6)(Oh) (4) environments, these systems magnetically behave as trimer, tetramer, and hexanuclear clusters, respectively. dc magnetic measurements in the 2-300 K range of temperature reveal antiferromagnetic coupling for all compounds, and the correlation of the superexchange interaction with the torsion angles involving the oximato bridges is experimentally confirmed.     

Ni(III) vs. Ni(II)-thiyl radical: charge-delocalisation in a binuclear Ni(III)Ni(II)-dithiolate complex

Multi-frequency EPR spectroscopy on 61Ni-labelled samples of [Ni2(L)]3+ confirms extensive charge-delocalisation between the Ni(III) centre and thiolate donors in the Ni(II)Ni(III) complex.     

On Ni catalysts for catalytic, asymmetric Ni/Cr-mediated coupling reactions

The importance of the Ni catalyst in achieving catalytic asymmetric Ni/Cr-mediated coupling reactions effectively is demonstrated. Six phenanthroline-NiCl(2) complexes 1a-c and 2a-c and five types of alkenyl iodides A-E were chosen for the study, thereby demonstrating that these Ni catalysts display a wide range of overall reactivity profiles in terms of the degree of asymmetric induction, geometrical isomerization, and coupling rate. For three types of alkenyl iodides A-C, a satisfactory Ni catalyst(s) was found within 1a-c and 2a-c. For disubstituted (Z)-alkenyl iodide D, 2c was identified as an acceptable Ni catalyst in terms of the absence of Z → E isomerization and the degree of asymmetric induction but not in terms of the coupling rate. Two phosphine-based Ni catalysts, [(Me)(3)P](2)·NiCl(2) and [(cy)(3)P](2)·NiCl(2), were found to meet all three criteria for D. The bond-forming reaction at the C16-C17 position of palytoxin was used to demonstrate the usefulness of the Ni catalysts thus identified.     

Kinetic Monte Carlo study of submonolayer heteroepitaxial growth comparing Cu/Ni and Pt/Ni on Ni(100)

The surface patterns formed during submonolayer Cu/Ni and Pt/Ni heteroepitaxy upon a Ni(100) substrate have been investigated by kinetic Monte Carlo (KMC) simulations. The two-dimensional (2D) KMC simulations are based upon rate constants for a complete nearest-neighbor set of 729 uncorrelated Cu or Pt atoms and/or Ni site-to-site hopping mobilities. The rate constant activation energies are determined by classical-potential total-energy calculations using an embedded-atom method potential function from the literature. We find that diffusion of Cu atoms occurs at a faster rate and Pt atoms at a slower rate than that of Ni atoms on the flat Ni(100) surface, and the initial nucleation and growth patterns of 2D islands and the kinetic versus thermodynamic control of the growth vary as a consequence. In the temperature and deposition time regime in which we work, the Cu/Ni systems show less than random mixing, while the Pt/Ni systems show more than random mixing. The Cu/Ni system has bonding energies that result in a tendency to segregate toward subdomains of pure Ni and Cu, though kinetic effects in the epitaxy trap the development of the system at small subdomain sizes. The Pt/Ni system has bonding energies giving a tendency to intermix completely, while epitaxial kinetic effects modestly interfere with the complete mixing. The kinetically determined island morphologies under various Cu/Ni and Pt/Ni compositions and deposition rates differ substantially over time periods that are long on the deposition time scale, and therefore the island patterns can become frozen in place.     

Electrochemical behavior of ammonia at Ni/Ni(OH)2 electrode

The electrochemical oxidation of ammonia was investigated on a Ni/Ni(OH)₂ electrode prepared by potential cycling of a Ni electrode in 1 M NaClO₄. It was found that oxidation of ammonia is strongly pH dependent and proceeds mainly at pH values above 7. This indicates that NH₃ rather than ${\text{NH}}_4^{+}$ is oxidized on nickel electrodes. Oxidation of ammonia occurs in the potential region of Ni(II)/Ni(III) redox activity resulting in formation of a clear peak. Ni/Ni(OH)₂ is not deactivated during ammonia oxidation even at high ammonia concentrations. A considerable fraction of the ammonia was oxidized to nitrate (11%), while the rest were gaseous nitrogen compounds. It is postulated that nitrogen was formed via a mechanism involving direct electron transfer from ammonia to the anode whereas the formation of nitrate involved oxygen transfer from water to an ammonia molecule.     

Structures and magnetism of {Ni2Na2}, {Ni4} and {Ni6(II)Ni(III)} 2-hydroxy-3-alkoxy-benzaldehyde clusters

Three polynuclear complexes, [NiNa(μ(1,1,1)-N(3))(μ-hmb)(2)(DMF)](2), (1), [Ni(4)(μ(3)-OMe)(4)(heb)(4)(MeOH)(1.05)(H(2)O)(2.95)], (2) and [Ni(III)(OH)(6)(hmb)(6)Ni(II)(6)]·(ClO(4))(3) (3) (Hhmb = 2-hydroxy-3-methoxy-benzaldehyde; Hheb = 2-hydroxy-3-ethoxy-benzaldehyde), were prepared by reaction of the appropriate ligand with nickel(II) perchloride hexahydrate under solvothermal conditions. All compounds were characterized by elemental analysis, IR spectroscopy and X-ray single-crystal diffraction. Compound 1 exhibits a centrosymmetric heterotetranuclear cluster which represents the first nickel complex to possess two connected face-sharing cubes structure {Ni(2)Na(2)N(2)O(4)}. Compound 2 has a tetranuclear Ni cluster with a cubane topology in which the Ni(II) and the oxygen atoms from the methanol ligands occupying alternate vertices of the cube. Compound 3 consisits of a mixed-valence [Ni(III)(OH)(6)(hmb)(6)Ni(II)(6)](3+) subunits and it represents the first nickel {Ni(II)(6)Ni(III)} complex to possess a planar hexagonal disc-like structure. The results show that the minor ligand modifications or solvent change have a key role in the structural control of the self-assembly process. Magnetic properties of 1-3 in the 300-2 K have been discussed. The {Ni(2)Na(2)} (1) and {Ni(4)} (2) core display dominant ferromagnetic interactions from the nature of the binding modes through μ(3)-N(3)(-) or μ(3)-OCH(3)(-), while {Ni(II)(6)Ni(III)} core (3) displays dominant anti-ferromagnetic interactions from the nature of the binding modes through μ(3)-OH(-).     

59Ni and 63Ni separation from boric acid concentrates produced at NPP

Procedure for direct separation of radionickel from boric acid concentrate was developed. Quantitative separation from 100 mL of real concentrate on the column filled with 3 mL of PAN-DMG composite material was achieved. PAN-DMG material (dimethylglyoxime in porous beads of polyacrylonitrile) was compared with Ni Resin and DMG-PAN material exhibited higher sorption capacity for nickel than Ni Resin.     

Surface melting in Ni55

The phenomenon of surface melting in a Ni₅₅ cluster is predicted from results of molecular dynamics simulations.     

Counterdisproportionation between cationic Ni(II) and phosphine Ni(0) complexes

The interaction of Ni(II) bis-tetrafluoroborate complexes [Ni(Dppe)₂](BF₄)₂ and [Ni(CH₃CN)₆](BF₄)₂ (where Dppe = 1,2-bis(diphenylphosphino)ethane)) with Ni(0) phosphine complexes Ni(Dppe)₂ and Ni(PPh₃)₄ in 1 : 1 mixture of toluene-acetonitrile was studied by the EPR method. The counter-disproportionation was shown to occur in a solution between the cationic Ni(II) complexes and the Ni(0) complexes to give Ni(I) complexes almost in quantitative amounts. The structures of the cationic Ni(I) complexes obtained were found to depend on both the solvent nature and the presence of a free phosphine in a solution.     

Half life of57Ni

The half life of⁵⁷Ni has been measured by Ge/Li/ -ray spectroscopy. The⁵⁷Ni radionuclide was created by bremsstrahlung impinging a sample of elemental Ni. Time change of the activity of the 1377.6-keV -ray following decay of⁵⁷Ni was analyzed to obtain a half life of 35.54±0.05 h for⁵⁷Ni.     

Electrochemical self-assembly of alkanethiolate molecules on Ni(111) and polycrystalline Ni surfaces

In this work, the electrochemical formation of alkanethiolate self-assembled monolayers (SAMs) on Ni(111) and polycrystalline Ni surfaces from alkanethiol-containing aqueous 1 M NaOH solutions was studied by combining Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), electrochemical techniques, and density functional theory (DFT) calculations. Results show that alkanethiolates adsorb on Ni concurrent with NiO electroreduction. The resulting surface coverage depends on the applied potential and hydrocarbon chain length. Electrochemical and XPS data reveal that alkanethiolate electroadsorption at room temperature takes place without S-C bond scission, in contrast to previous results from gas-phase adsorption. A complete and dense monolayer, which is stable even at very high cathodic potentials (-1.5 V vs SCE), is formed for dodecanethiol. DFT calculations show that the greater stability against electrodesorption found for alkanethiolate SAMs on Ni, with respect to SAMs on Au, is somewhat related to the larger alkanethiolate adsorption energy but is mainly due to the larger barrier to interfacial electron transfer present in alkanethiolate-covered Ni. A direct consequence of this work is the possibility of using electrochemical self-assembly as a straightforward route to build stable SAMs of long-chained alkanethiolates on Ni surfaces at room temperature.     

Structure of products of H-H and C-H bond activation by Ni atom, Ni2 cluster, and Ni-porphyrin complex of Ni2 cluster

New catalytic systems based on porphyrin complexes of Ni₂ cluster and capable of activating C-H and H-H bonds are proposed. DFT calculations showed that a Ni₂ cluster can coordinate Ni-porphyrin with a considerable gain in energy. The structures of the products of methane and hydrogen activation were discussed.     

Electrocatalytic oxidation of formaldehyde and methanol on Ni(OH)2/Ni electrode

A nickel hydroxide-modified nickel electrode (Ni(OH)₂/Ni) was successfully prepared by the cyclic voltammetry (CV) method and the electrocatalytic properties of the electrode for formaldehyde and methanol oxidation have been investigated respectively. The Ni(OH)₂/Ni electrode exhibits high electrocatalytic activity in the reaction. A new method has been developed for formaldehyde determination at the nickel hydroxide-modified nickel electrode and the experimental parameters were optimized. The oxidation peak current is linearly proportional to the concentration of formaldehyde in the range of 7.0 × 10^?5 to 1.6 × 10^?2 M with a detection limit of 2.0 × 10^?5 M. Recoveries of artificial samples are between 93.3 and 103.5%. The effect of scan rate and methanol concentration on the electrochemical behavior of methanol were investigated respectively.     

Electrochemical properties of Mg2Ni and Mg2Ni2 prepared by mechanical alloying

Crystallized Mg₂Ni and Mg₂Ni₂ amorphous alloys synthesized by mechanical alloying at room temperature were found to present first discharge capacities of 270 mAh/g and 500 mAh/g, respectively. These capacities decrease upon subsequent cycling to reach 30 mAh/g and 70 mAh/g after 60 charge/discharge cycles. The largest initial capacity, measured for the Mg₂Ni₂ composition, is ascribed to its amorphous nature, while its poor capacity retention upon cyding appears to originate from a fine Ni dispersion within the Mg/Ni matrix. This dispersion enables a better protection of the Mg against oxidation during cycling. We show, however, that this protection of Mg by Ni is not sufficient to avoid a strong corrosion of Mg in the KOH electrolyte during cycling, leading to the formation of Mg(OH)₂. Received: 8 October 1997 / Accepted: 20 January 1998