Efficient Synthesis of Oxazolidin‐2‐one via (Chitosan‐Schiff Base)cobalt(II)‐Catalyzed Oxidative Carbonylation of 2‐Aminoalkan‐1‐ols

The (chitosan‐Schiff base)cobalt(II) complex was found to be an efficient catalyst for the oxidative carbonylation (CO/O₂) of 2‐aminoalkan‐1‐ols 1 to give oxazolidin‐2‐ones 2 , in the presence of NaI. The effects of promoters, temperature, solvents, and other reaction conditions were investigated in this study.     

Synthesis of 5‐aryl and 5‐amidocamptothecins

A variety of 5‐aryl‐(20S)‐camptothecin derivatives were synthesized by the reaction of 5‐hydroxy‐(20S)‐camptothecin with aromatic hydrocarbons under Friedel‐Craft reaction conditions in moderate to good yield as diastereomeric pairs. The methodology was then extended for the synthesis of 5‐amido‐(20S)‐camptothecin derivatives by reacting 5‐hydroxy‐(20S)‐camptothecin with alkyl and aryl nitriles under Ritter type reaction conditions. The reaction is presumed to proceed through an iminium ion intermediate under Friedel Craft and Ritter type reaction condition, which is further trapped by nucleophile present in the reaction medium. J. Heterocyclic Chem., 00 , 00 (2011).     

New trans/cis tetrahydroisoquinolines. 2. trans‐ and cis‐3‐(1‐methyl‐1h‐pyrrol‐2‐yl)‐1‐(2H)‐oxo‐2‐phenethyl‐1,2,3,4‐tetrahydroisoquino‐lin‐4‐carboxylic acids and subsequent transformations

Stereochemical course of the reaction of homophthalic anhydride and N‐(1‐methyl‐1H‐pyrrol‐2‐yl‐methylidene)‐phenethylamine was studied. Mixtures of the expected trans‐ and cis‐1,2,3,4‐tetrahydroiso‐quinoline‐4‐carboxylic acids trans‐ 4 and cis‐ 4 were obtained along with by‐products 5 and 6 . The ratios of all products and the diastereomers, obtained under different reaction conditions, were established by pmr. THF as a solvent and ultrasonic treatment are applied for the first time in the reaction of this type. The reaction was made diastereoselective towards any isomer. The carboxylic group of trans‐ 4 was transformed in four steps into various cyclic amino‐methyl groups yielding numerous new tetrahydroisoquinolinones trans‐ 10a‐i incorporating a given fragment of pharmacological interest. Reduction of 10a‐i was studied.     

Microwave‐Assisted and Ultrasonic‐Assisted Three‐Component Heterocyclization of 4‐Amino‐5‐carboxamido‐1,2,3‐triazole,Thiopyran‐3‐one‐1,1‐dioxide,and Aromatic Aldehydes

Three‐component heterocyclization of 4‐amino‐5‐carboxamido‐1,2,3‐triazole, thiopyran‐3‐one‐1,1‐dioxide, and aromatic aldehydes under ultrasonic and microwave irradiation was studied. Regardless of the reaction parameters, 5,6,7,9‐tetrahydro‐4H‐thiopyrano[3,2‐d][1,2,3]triazolo[1,5‐a]pyrimidine‐8,8‐dioxides were isolated as sole reaction products whose structures were proven with help of NMR data and X‐ray analysis.     

Preparation of 2‐phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline and 2‐methyl‐4‐oxo‐3,4‐dihydroquinazoline derivatives formation

The cyclization of phenacyl anthranilate has been studied with the aim to develop the synthesis of 2‐(2′‐aminophenyl)‐4‐phenyloxazole. However, a different course of the reaction than expected was observed. 2‐Phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 3a ) was formed by the reaction of phenacyl anthranilate ( 2 ) with ammonium acetate under various conditions. 3‐Hydroxy‐2‐phenyl‐4(1H)‐quinolinone ( 4 ) arose by heating compound 3a in acetic acid. The same compound was obtained by melting compound 3a , but the yield was lower. Different types of products resulted in the reaction of compound 3a with acetic anhydride. Under mild conditions acetylated products 2‐acetoxymethyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 7a ) and 2‐acetoxymethyl‐3‐acetyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 8 ) were prepared. If the reaction was carried out under reflux of the reaction mixture, molecular rearrangement took place to give cis and trans 2‐methyl‐4‐oxo‐3‐(1‐phenyl‐2‐acetoxy)vinyl‐3,4‐dihydroquinazolines ( 9a and 9b ). All prepared compounds have been characterised by their ¹H, ¹³C and ¹⁵N NMR spectra, IR spectra and MS.     

Microwave‐induced Stereoselectivity in Synthesis of trans‐4‐Aryl‐3‐methyl‐6‐oxo‐4,5,6,7‐tetrahydro‐2H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

A facile synthesis of trans isomers of 4‐aryl‐3‐methyl‐6‐oxo‐4,5,6,7‐tetrahydro ‐ 2H ‐ pyrazolo[3,4‐b]pyridine‐5‐carbonitriles via three‐component condensation reaction of an aldehyde, 3‐amino‐5‐methylpyrazole and ethyl cyanoacetate in acetonitrile has been developed under microwave irradiation. This one‐pot reaction proceeds without any catalyst in short times and gives the product in high selectivities and high yields.     

Microwave Induced Synthesis of 3‐Aryl‐6‐(6‐/8‐substituted 4‐chloroquinoline‐3‐yl) ‐ s ‐triazolo [3,4‐b] −1,3,4‐thiadiazoles

The condensation of 4‐amino‐3‐aryl‐5‐mercapto‐1, 2, 4‐triazoles (1a‐f) with 6‐/8‐substituted 1,4‐dihydro‐4‐oxo‐quinoline‐3‐carboxylic adds (2a‐d) in the presence of phosphorus oxychloride on refluxng or under microwave irradiation gave twenty four novel 3‐aryl‐6‐ (6‐/8‐substituted 4‐chloroquinoline‐3‐yl)‐s‐triazolo[3,4‐b]‐1, 3,4‐thiadiazoles (4a‐x), Considerable increase in the reaction rate has been observed with improved yields under microwave irradiation. The structures of the compounds synthesized were determined by elemental analyses, IR, ¹H NMR and MS spectra. Their spectral properties and the reaction mechanism were also discussed. The preliminary biological test showed that some of compounds bad moderate antibacterial activities.     

Heterocyclization reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines under appel's conditions

The reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines 12 with triphenylphosphine, carbon tetra‐chloride, and triethylamine (Appel's conditions) led to the corresponding carbodiimides 13 , which underwent intramolecular cycloaddition reaction with aziridine under the reaction conditions to give the pyridine‐fused heterocycles, 2,3‐dihydro‐1H‐imidazo[2′,3′:2,3]imidazo[4,5‐b]pyridines 16 and 12,13‐dihydro‐5H‐1,3 ‐benzodiazepino [2′,3′:2,3] imidazo[4,5‐b]pyridines 17 .     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

Chiral stationary phases based on chitosan bis(4‐methylphenylcarbamate)‐(alkoxyformamide)

Highly N‐deacetylated chitosan was chosen as a natural chiral origin for the synthesis of the selectors of chiral stationary phases. Therefore, chitosan was firstly acylated by various alkyl chloroformates yielding chitosan alkoxyformamides, and then these resulting products were further derivatized with 4‐methylphenyl isocyanate to afford chitosan bis(4‐methylphenylcarbamate)‐(alkoxyformamide). A series of chiral stationary phases was prepared by coating these derivatives on 3‐aminopropyl silica gel. The content of the derivatives on the chiral stationary phases was nearly 20% by weight. The chiral stationary phases prepared from chitosan bis(4‐methylphenylcarbamate)‐(ethoxyformamide) and chitosan bis(4‐methylphenylcarbamate)‐(isopropoxyformamide) comparatively showed better enantioseparation capability than those prepared from chitosan bis(4‐methylphenylcarbamate)‐(n‐pentoxyformamide) and chitosan bis(4‐methylphenylcarbamate)‐(benzoxyformamide). The tolerance against organic solvents of the chiral stationary phase of chitosan bis(4‐methylphenylcarbamate)‐(ethoxyformamide) was investigated, and the results revealed that this phase can work in 100% ethyl acetate and 100% chloroform mobile phases. Because as‐synthesized chiral selectors did not dissolve in many common organic solvents, the corresponding chiral stationary phases can be utilized in a wider range of mobile phases in comparison with conventional coating type chiral stationary phases of cellulose and amylose derivatives.     

Synthesis of Dialkyl 2‐(Alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates

Dialkyl 2‐(alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates are prepared in a one‐pot three‐component reaction of alkyl isocyanide, dialkyl acetylenedicarboxylate, and α‐tropolone (=2‐hydroxycyclohepta‐2,4,6‐trienone). The reaction proceeds smoothly at room temperature and under neutral conditions to afford tropolone derivatives in high yield.     

Chemoselective Synthesis of β‐Amino Ester or β‐Lactam via Sonochemical Reformatsky Reaction

A series of β‐amino esters were synthesized by the reaction of N‐tosyl aldimine or N‐hydroxy aldimine with bromoacetate by sonochemical Reformatsky reaction. The β‐N‐hydroxyamino ester was obtained and the formed sensitive hydroxylamino functionality was resistant under the reaction condition. The β‐lactam also was synthesized by the reaction of N‐p‐methoxy aldimine as reacting substrate under this sonochemical Reformatsky reaction condition.     

Cross‐Linked‐Polymer‐Supported N‐{2′‐[(Arylsulfonyl)amino][1,1′‐binaphthalen]‐2‐yl}prolinamide as Organocatalyst for the Direct Aldol Intermolecular Reaction under Solvent‐Free Conditions

A bottom‐up strategy was used for the synthesis of cross‐linked copolymers containing the organocatalyst N‐{(1R)‐2′‐{[(4‐ethylphenyl)sulfonyl]amino}[1,1′‐binaphthalen]‐2‐yl}‐D ‐prolinamide derived from 2 (Scheme 1). The polymer‐bound catalyst 5b containing 1% of divinylbenzene as cross‐linker showed higher catalyst activity in the aldol reaction between cyclohexanone and 4‐nitrobenzaldehyde than 5a and 5c . Remarkably, the reaction in the presence of 5b was carried out under solvent‐free, mild conditions, achieving up to 93% ee (Table 1). The polymer‐bound catalyst 5b was recovered by filtration and re‐used up to seven times without detrimental effects on the achieved diastereo‐ and enantioselectivities (Table 2). The catalytic procedure with polymer 5b was extended to the aldol reaction under solvent‐free conditions of other ketones, including functionalized ones, and different aromatic aldehydes (Table 3). In some cases, the addition of a small amount of H₂O was required to give the best results (up to 95% ee). Under these reaction conditions, the cross‐aldol reaction between aldehydes proceeded in moderate yield and diastereo‐ and enantioselectivity (Scheme 2).     

One‐pot Regioselective Synthesis of Novel 1‐N‐Methyl‐spiro[2,3′]oxindole‐spiro[3,3″]‐1″‐N‐arylpyrrolidine‐2″,5″‐dione‐4‐arylpyrrolidines through Multicomponent 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylide

An atom economic and facile synthesis of novel dispiro–oxindole–pyrrolidines has been achieved via a three‐component tandem cycloaddition of azomethine ylide generated in situ from isatin and sarcosine by decarboxylative condensation with N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐dione derivatives as dipolarophiles. The salient features of synthetic procedure are characterized by the mild reaction conditions, high yields, high regioselectivity and stereoselectivity, one‐pot procedure, and operational simplicity. This regioselectivity was assumed to be under the influence of π–π stacking interactions between the aromatic rings of azomethine ylide and N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐diones that further control the exo–endo selectivity of the reaction 1,3‐dipolar cycloaddition. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data.     

An Efficient One‐Pot Synthesis of 7,7‐Dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one Derivatives Using Chitosan–SO3H as Biodegradable Organocatalyst

Chitosan sulfonic acid (CS–SO₃H), a biodegradable green catalyst, was found to be an impressive system for one‐pot four‐component reaction of different aromatic aldehydes, 3‐acetylcoumarin, dimedone, and ammonium acetate leading to 7,7‐dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one under solvent‐free condition. This methodology produces diverse superiorities such as operational simplicity, short reaction time, and high yield. Further, the catalyst can be reused for four times without any noticeable decrease in the catalytic activity.     

Pd‐Catalyzed Cyclocarbonylation of 2‐(2‐Bromoaryl)indoles with CO as a C1 Source: Selective Access to 6 H‐Isoindolo[2,1‐a]indol‐6‐ones and Indeno[1,2‐b]indol‐10(5 H)‐ones

A highly efficient and regioselective synthetic route to 6 H‐isoindolo[2,1‐a]indol‐6‐ones and indeno[1,2‐b]indol‐10(5 H)‐ones through the Pd‐catalyzed cyclocarbonylation of 2‐(2‐bromoaryl)indoles under atmospheric CO pressure has been achieved. Notably, the regioselectivity of the reaction was exclusively dependent on the structural characteristics of the indole substrates. With N‐unsubstituted indoles as the starting materials, the reaction afforded 6H‐isoindolo[2,1‐a]indol‐6‐ones in good‐to‐excellent yields. On the other hand, with N‐substituted indoles as the substrates, the reaction gave indeno[1,2‐b]indol‐10(5 H)‐ones in a highly regioselective manner.     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

ECEC and ECE‐Type Mechanisms in Electrochemical Oxidation of 4‐Substituted Catechols in the Presence of 4‐Hydroxy‐6‐methyl‐2‐pyrone

Electrochemical oxidation of 3,4‐dihydroxybenzoic acid ( 1 ) and 4‐tert‐butylcatechol ( 5 ) in the presence of 4‐hydroxy‐6‐methyl‐2‐pyrone ( 2 ) as nucleophile in aqueous solution has been studied using cyclic voltammetry and controlled‐potential coulometry. The results indicate that 1 via Michael reaction under electro‐decarboxylation reaction converts to heterocyclic compound 4 , and the quinone derived from 4‐tert‐butylcatechol ( 5 ) participates in Michael reaction with 2 and through an ECE mechanism converts to the corresponding o‐quinone ( 6a ). The electrochemical synthesis of 4 and 6a has been successfully performed in an undivided cell.     

Magnetic Nanoparticle Supported Ionic Liquid Assisted Green Synthesis of Pyrazolopyranopyrimidines and 1,6‐diamino‐2‐oxo‐1,2,3,4‐tetrahydropyridine‐3,5‐ dicarbonitriles

A simple and eco‐friendly green protocol was used for synthesis of pyrazolopyranopyrimidines via four‐component reaction of hydrazine hydrate, ethyl acetoacetate, barbituric acid or dimethyl barbituric acid, and aromatic aldehydes under thermal and solvent‐free conditions in the presence of magnetic nanoparticle supported silica bonded n‐propyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride (MNPs@DABCO⁺Cl^?) as an efficient, recyclable heterogeneous catalyst. MNPs@DABCO⁺Cl^? also catalyzed the synthesis of 1,6‐diamino‐2‐oxo‐1,2,3,4‐tetrahydropyridine‐3,5‐dicarbonitrile derivatives by four‐component reaction of hydrazine hydrate, malononitrile, ethyl cyanoacetate and ketones under thermal and solvent‐free conditions at 80 °C. These methods are practical and offer many advantages, such as high yields, short reaction times, and simple work‐up.     

Synthesis of Substituted α‐(Hydroxymethyl)‐β‐iodoacrylates via MgI2‐Promoted Stereoselective Aldol Coupling

The efficient and highly stereoselective syntheses of a variety of (Z)‐configured, substituted α‐(hydroxymethyl) ‐ β‐iodo‐acrylates from prop‐2‐ynoate and various aldehydes was achieved. The synthetic protocol involves a simple one‐pot coupling reaction under mild conditions, promoted by MgI₂, which serves both as a Lewis acid and iodine source for a Baylis? Hillman‐type reaction. All adducts were generated in good‐to‐excellent yields, the (Z)‐isomers being formed in high selectivity (>98%). The conversion of methyl prop‐2‐ynoate into an active ‘β‐iodo allenolate’ intermediate, which then nucleophilically attacks an aldehyde, is proposed as a plausible reaction mechanism.