Electrochemical Sensor Based on Thioether Oligomer Poly(N‐vinylpyrrolidone)‐modified Gold Electrode for Bisphenol A Detection

Presently, bisphenol A (BPA) has been added to the list of substances of very high concern as endocrine disruptors. According to the literature, exposure to bisphenol A even at low doses may result in adverse health effects. In this study, electrochemical sensor of Bisphenol A based on thioether DDT‐Poly(N‐vinylpyrrolidone) oligomer has been developed. The thioether oligomer, which is capable of recognizing BPA, was prepared and used for gold electrode modification. The characterization of the modified gold electrode and the synthesized thioether oligomer were carried out by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and Size exclusion chromatography (SEC). Obtained results indicate that the modified electrode shows good electrochemical activity, good sensitivity and reproducibility for BPA detection. It exhibited a good linear relationship ranging from 1 to 20 pg/mL, and the detection limit was found to be 1.9 pg/mL at S/N=3. Several interfering species such as hydroquinone, phenol and resorcinol were used and their behaviors on the modified gold electrode were investigated.     

Determination of Bisphenol A Using an Electrochemical Sensor Based on a Molecularly Imprinted Polymer-Modified Multiwalled Carbon Nanotube Paste Electrode

A novel electrochemical sensor for bisphenol A was developed through the combination of a molecular imprinting technique with a multiwalled carbon nanotube paste electrode. A molecularly imprinted polymer and nonimprinted polymer were synthesized in the presence and absence of bisphenol A, and then used to prepare the electrode. The bisphenol A imprinted polymer was applied as a selective recognition element in the electrochemical sensor. Differential pulse voltammetry was used to characterize the electrochemical behavior of bisphenol A at the modified electrodes. The results showed that the imprinted sensor had highest response for bisphenol A. Parameters including the carbon paste composition, pH, and adsorption time for the imprinted sensor were optimized. Under the optimized conditions, the differential pulse voltammetry peak current was linear with the concentration of bisphenol A from 0.08 to 100.0 µM, with a detection limit of 0.022 µM. The imprinted sensor for bisphenol A exhibited good selectivity, stability, and reproducibility. This sensor was successfully used for the determination of bisphenol A in real water samples.     

Simultaneous Electrochemical Determination of Hydroquinone and Bisphenol A using a Carbon Paste Electrode Modified with Silver Nanoparticles

In this paper, a rapid and sensitive modified electrode for the simultaneous determination of hydroquinone (HQ) and bisphenol A (BPA) is proposed. The simultaneous determination of these two compounds is extremely important since they can coexist in the same sample and are very harmful to plants, animals and the environment in general. A carbon paste electrode (CPE) was modified with silver nanoparticles (nAg) and polyvinylpyrrolidone (PVP). The PVP was used as a reducing and stabilizing agent of nAg from silver nitrate in aqueous media. The nAg‐PVP composite obtained was characterized by transmission electron microscopy and UV‐vis spectroscopy. The electrochemical behavior of HQ and BPA at the nAg‐PVP/CPE was investigated in 0.1 mol L⁻¹ B−R buffer (pH 6.0) using cyclic voltammetry (CV) and square wave voltammetry (SWV). The results indicate that the electrochemical responses are improved significantly with the use of the modified electrode. The calibration curves obtained by SWV, under the optimized conditions, showed linear ranges of 0.09–2.00 μmol L⁻¹ for HQ (limit of detection 0.088 μmol L⁻¹) and 0.04–1.00 μmol L⁻¹ for BPA (limit of detection 0.025 μmol L⁻¹). The modified electrode was successfully applied in the analysis of water samples and the results were comparable to those obtained using UV‐vis spectroscopy.     

Voltammetric Detection of Catechol and Dopamine Based on a Supramolecular Composite Prepared from Multifarene[3,3] and Reduced Graphene Oxide

A selective and sensitive modified‐electrode for catechol and dopamine was presented with supramolecular recognition accomplished by making use of the macrocyclic host multifarene[3,3] that was used as a composite with reduced graphene oxide. The morphologies and electrochemical nature of the composite were characterized by atomic force microscopy, transmission electron microscopy, cyclic voltammetry and differential pulse anodic voltammetry. The modified electrode, best operated at a potential around 0.16 V vs. Ag/AgCl, displayed a differential pulse voltammetric response in the linear concentration range of 10–100 nM within a detection limit of 0.51 nM (at S/N=3). It was further applied to detect dopamine (at a working potential of 0.18 V vs. Ag/AgCl) in the linear concentration range of 10–100 nM with a detection limit of 0.62 nM. The modified electrode also exhibited satisfactory results to the determination of dopamine injections. The constructed modified electrode for dopamine detection was investigated in the presence of the interfering substances including glucose, urea and ascorbic acid, indicating a good selectivity.     

POMs as Active Center for Sensitively Electrochemical Detection of Bisphenol A and Acetaminophen

A new type of electrochemical sensor based on multi-walled carbon nanotubes(MWCNTs), K2H4SiW11CuO39-6H2O(SiW11Cu) and gold nanoparticles(AuNPs) was prepared for the simultaneous detection of bisphenol A and acetaminophen. Differential pulse voltammetry(DPV), cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) were used for electrochemical characterization, and Fourier transfonn infrared spectroscopy(FTIR) was used to characterize the structure of polyoxometalates. Electrochemical experimental results show that the composite modified electrodes have good electrochemical activity as well as current response values of bisphenol A and acetaminophen when pH=7.0. At the same time, the modified electrode exhibits good stability and reproduction, and has good anti-interference ability to other substances. In practical application, the sensor obtained satisfactory results.     

Electrochemical detection of DNA damage induced by in situ generated bisphenol A radicals through electro-oxidation

A glassy carbon electrode was modified with dsDNA and a nanocomposite composed of multi-walled carbon nanotubes and chitosan (MWNT-chit). The electrode was applied to the electrochemical detection of DNA damage as induced by in situ generated bisphenol A (BPA) radicals through electro-oxidation. The modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that MWNT-chit nanocomposite represents a viable platform for the immobilization of DNA that effectively promotes electron transfer between DNA and the electrode. The mode of interaction between DNA and BPA was investigated by differential pulse voltammetry and UV-vis spectrophotometry, indicating that the dominant interaction is intercalation. In order to explore the mechanism of damage caused by BPA radicals, the electro-oxidation of BPA at the modified glass electrode was investigated. Based on the signal for guanine without any other external indicator, DNA damage was investigated through the electro-oxidation of BPA.     

An Electrochemical Sensor Based on Nitrogen‐doped Carbon Nanofiber for Bisphenol A Determination

In this paper, bisphenol A was determined by electrochemical method at a nitrogen‐doped carbon nanofiber modified carbon paste electrode (NCNF/CPE) with high sensitivity and good selectivity. NCNF was obtained by a simple electrospinning followed by carbonization procedure, in which polyacrylonitrile (PAN) as precursor and nitrogen doping was realized by re‐utilizing the tail gas that produced in the thermal pretreatment process. Good reproducibility and high stability were obtained for BPA detection at NCNF modified CPE. Current response plotted with BPA concentration was linear in the range of 0.1–60 μM with LOD of 0.05 μM. The proposed electrochemical sensor was employed for BPA determination with satisfactory recoveries for real water samples, indicating the practical applicability of NCNF/CPE.     

Voltammetric Determination of Bisphenol A Using an Acetylene Black‐Dihexadecyl Hydrogen Phosphate Composite Film‐Modified Electrode

Abstract

Herein, acetylene black (AB) was easily dispersed into water in the presence of dihexadecyl hydrogen phosphate (DHP), resulting in a stable and homogeneous AB‐DHP suspension. Then, an AB‐DHP composite film coated glassy carbon electrode (GCE) was constructed after evaporation of water. The electrochemical behavior of bisphenol A was investigated using cyclic voltammetry (CV), linear sweep voltammetry (LSV), and differential pulse voltammetry (DPV). Compared with the unmodified GCE, the AB‐DHP film‐modified GCE not only significantly enhances the oxidation peak current of bisphenol A but also lowers the oxidation overpotential, suggesting that AB‐DHP film‐modified GCE has great potential in sensitive determination of bisphenol A. Based on this, a sensitive and simple electrochemical method was developed after optimization of the experimental parameters such as supporting electrolyte, the amount of AB‐DHP, scan rate, and accumulation time. The linearity is over the range form 2.0×10^?8 to 5.0×10^?6 mol l^?1, and the detection limit is 6.0×10^?9 mol l^?1. Finally, this method was successfully employed to determine bisphenol A in waste water samples.     

Electrodeposition of Copper Oxide Nanoparticles on Precasted Carbon Nanoparticles Film for Electrochemical Investigation of anti‐HIV Drug Nevirapine

This work describes the development of a novel electrochemical sensor based on electrodeposition of copper oxide nanoparticles onto carbon nanoparticle (CNP) film modified electrode for the analysis of the anti‐HIV drug, nevirapine (NEV). The electrochemical experiments were performed using linear sweep and cyclic voltammetry. Atomic force microscopy was applied for surface characterization of the deposited modifier film (CuO‐CNP) on glassy carbon electrode (GCE). No oxidation peak was observed for NEV on the bare GCE, but both CNP‐GCE and CuO‐CNP‐GCE showed a distinctive anodic response towards NEV with considerable enhancement (276‐fold and 350‐fold, respectively) compared to CuO‐GCE. The mechanism of the electrocatalytic process on the modified electrode surface was investigated by cyclic and linear sweep voltammetry at various potential sweep rates and pHs of the buffer solutions. The modified electrode exhibited linear dynamic range in three concentration intervals (0.1–0.8, 1–10 and 10–100 µM) with a detection limit of 66 nM. The stability, reproducibility, and repetitive usability exhibited by the proposed modified electrode are good enough to make it a suitable sensor for the determination of NEV in real samples with complex matrices such as human blood serum.     

双酚A在SDS现场自组装膜与[bupy]PF6复合修饰碳糊电极上的电催化氧化及电分析方法

研究了双酚A(BPA)在十二烷基硫酸钠(SDS)现场自组装膜与离子液体N-丁基吡啶夫氟磷酸盐([ bupy]PF6)复合修饰碳糊电极(SDS-[ bupy]PF6/CPE)上的电催化氧化行为和电化学动力学性质.实验结果表明,在SDS-[ bupy]PF6/CPE上BPA发生了一受扩散控制的不可逆电化学氧化过程,用循环伏安(CV)法和计时电流(CA)法测得BPA在SDS-[bupy]PF6/CPE上的电极反应过程动力学参数.用方波伏安(SWV)法测得BPA氧化峰电流(Ipa)与其浓度在1.0×10-5～ 1.0×10-3 mol/L范围内呈良好的线性关系,线性方程为Ipa(μA) =2.635 +51.30c( 10-3 mol/L),r =0.998 1,检测限(S/N=3)为3.01×10-7 mol/L,同时运用SWV法对湖水样品中双酚A的含量进行了电化学定量测定.     

ZnO/石墨烯修饰电极的制备及电化学性能研究

采用水热法合成了纳米氧化锌-氧化石墨烯复合材料,并基于该复合材料构制了一种新型双酚A传感器,研究了该传感器的电化学行为。结果表明,在含8.0×10-5mol/L CTAB的p H 7.0磷酸盐缓冲液中,双酚A在0.573V处出现1个不可逆的氧化峰,具有良好的电化学响应;其氧化峰电流与浓度在1.0×10-8~4.0×10-5mol/L范围内呈良好的线性关系,检出限为5.0×10-9mol/L;对模拟环境水样中双酚A进行3次平行测定的回收率在96.3%~101.9%之间,相对误差在1.2%~3.8%范围内。该传感器具有灵敏度高、线性范围宽的特点。     

RNA Modified Electrodes for Simultaneous Determination of Dopamine and Uric Acid in the Presence of High Amounts of Ascorbic Acid

A promising electrochemical biosensor was fabricated by electrochemical grafting of ribonucleic acid (RNA) at 1.8 V (vs. SCE) on glassy carbon electrode (GCE) (denoted as RNA/GCE), for simultaneous detection of dopamine (DA) and uric acid (UA) with coexistence of excess amount of ascorbic acid (AA). The electrode was characterized by X‐ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The RNA modified layer on GCE exhibited superior catalytic ability and anionic exclusive ability in comparison with the DNA modified electrode. Three separated anodic DPV peaks were obtained at 0.312, 0.168 and ?0.016 V for UA, DA and AA, respectively, at the RNA/GCE in pH 7.0 PBS. In the presence of 2.0 mM AA, a linear range of 0.37 to 36 μM with a detection limit of 0.2 μM for DA, and in the range of 0.74 to 73 μM with a detection limit of 0.36 μM for UA were obtained. The co‐existence of 5000 fold AA did not interfere with the detection of DA or UA. The modified electrode shows excellent selectivity, good sensitivity and good stability.     

Sensitive Voltammetric Determination of Bisphenol A Based on a Glassy Carbon Electrode Modified with Copper Oxide‐Zinc Oxide Decorated on Graphene Oxide

A highly sensitive and selective chemical sensor was prepared based on metallic copper‐copper oxides and zinc oxide decorated graphene oxide modified glassy carbon electrode (Cu?Zn/GO/GCE) through an easily electrochemical method for the quantification of bisphenol A (BPA). The composite electrode was characterized via scanning electron microscopy (SEM), X‐Ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of BPA in Britton‐Robinson (BR) buffer solution (pH 7.1) was examined using cyclic voltammetry (CV). Under optimized conditions, the square wave voltammetry (SWV) response of Cu?Zn/GO/GCE towards BPA indicates two linear relationships within concentrations (3.0 nmol L^?1?0.1 μmol L^?1 and 0.35 μmol L^?1?20.0 μmol L^?) and has a low detection limit (0.88 nmol L^?1). The proposed electrochemical sensor based on Cu?Zn/GO/GCE is both time and cost effective, has good reproducibility, high selectivity as well as stability for BPA determination. The developed composite electrode was used to detect BPA in various samples including baby feeding bottle, pacifier, water bottle and food storage container and satisfactory results were obtained with high recoveries.     

双酚A在氮掺杂多壁碳纳米管修饰电极上的电化学行为及测定

构建了不同百分含量的氮掺杂的多壁碳纳米管化学修饰石墨电极,利用线性扫描伏安法及循环伏安法研究了双酚A(BPA)在修饰电极上的电化学行为。提出了一种灵敏、简便的直接检测双酚A的电化学分析方法。在pH6.98的PBS缓冲溶液中,在电位0.20 V富集后,该修饰电极在0.680 V出现一个灵敏的、峰形好的氧化峰。表明氮掺杂多壁碳纳米管薄膜对双酚A的氧化表现出一定的催化作用,能显著提高双酚A的氧化峰电流。在优化条件下,采用线性扫描伏安法对双酚A进行测定。双酚A的氧化峰电流与其浓度在2.5×10-7～1.0×10-4 mol/L之间有很好的线性关系(R为0.996),检出限为5.0×10-8mol/L。电极已初步用于实际样品中BPA的测定。     

Reduced Graphene Oxide/Carbon Nanotube/Gold Nanoparticles Nanocomposite Functionalized Screen‐Printed Electrode for Sensitive Electrochemical Detection of Endocrine Disruptor Bisphenol A

We fabricated a highly sensitive electrochemical sensor for the determination of bisphenol A (BPA) in aqueous solution by using reduced graphene oxide (RGO), carbon nanotubes (CNT), and gold nanoparticles (AuNPs)‐modified screen‐printed electrode (SPE). GO/CNT nanocomposite was directly reduced to RGO/CNT on SPE at room temperature. AuNPs were then electrochemically deposited in situ on RGO/CNT‐modified SPE. Under optimized conditions, differential pulse voltammetry (DPV) produced linear current responses for BPA concentrations of 1.45 to 20 and 20 to 1,490 nM, with a calculated detection limit of an ultralow 800 pM. The sensor response was unaffected by the presence of interferents such as phenol, p‐nitrophenol, pyrocatechol, 2,4‐dinitrophenol, and hydroquinone.     

A Glassy Carbon Electrode Modified with LangmuirBlodgett Film Composed of DNA and Polyaniline for the Sensitive Determination of Salbutamol

A composite Langmuir? Blodgett film prepared from DNA and polyaniline was deposited on the surface of a glassy carbon electrode (GCE) to give a new voltammetric sensor for the β2‐agonist salbutamol (SAL). Cyclic voltammetry and electrochemical impedance spectroscopy were employed to study the characteristic of the modified electrode. The electrochemistry of SAL at the modified electrode was investigated at pH 6.8 by cyclic voltammetry and differential pulse anodic voltammetry. The oxidation of SAL at this electrode is an adsorption‐controlled irreversible process. A sensitive electroanalytical method for determination of SAL was worked out that displays high precision and good reproducibility. The method was applied to quantify SAL in tablets with satisfactory results.     

Graphene Functionalized Graphite Electrode with Diphenylacetylene for Sensitive Electrochemical Determination of Adenosine‐5′‐triphosphate

In this paper a molecular wire modified carbon paste electrode (MW‐CPE) was firstly prepared by mixing graphite powder with diphenylacetylene (DPA). Then a graphene (GR) and chitosan (CTS) composite film was further modified on the surface of MW‐CPE to receive the graphene functionalized electrode (CTS‐GR/MW‐CPE), which was used for the sensitive electrochemical detection of adenosine‐5′‐triphosphate (ATP). The CTS‐GR/MW‐CPE exhibited excellent electrochemical performance and the electrochemical behavior of ATP on the CTS‐GR/MW‐CPE was carefully studied by cyclic voltammetry with an irreversible oxidation peak appearing at 1.369 V (vs. SCE). The electrochemical parameters such as charge transfer coefficient (α) and electrode reaction standard rate constant (k_s) were calculated with the results of 0.53 and 5.28×10^?6 s^?1, respectively. By using differential pulse voltammetry (DPV) as detection technique, the oxidation peak current showed good linear relationship with ATP concentration in the range from 1.0 nM to 700.0 µM with a detection limit of 0.342 nM (3σ). The common coexisting substances, such as uric acid, ascorbic acid and guanosine‐5′‐triphosphate (GTP), showed no interferences and the modified electrode was successfully applied to injection sample detection.     

Electrocatalytic Properties of a Novel Poly‐1‐Naphthylamine‐Modified Electrode Using Ascorbic Acid as Molecule Probe

A glassy carbon electrode was modified with an electropolymerized film of 1‐naphthylamine in aqueous solution. The electrocatalytic properties of this modified electrode (ME) were investigated using ascorbic acid (AA) as probe molecule. The electrochemical behavior of AA in buffer solution was examined by voltammetry and amperometry. The results showed that the ME exhibited good electrocatalytic activity towards the oxidation of AA, as a consequence, it can be used as amperometric sensor of this analyte in a flow injection system with good sensitivity. Calibration curves were linear over the concentration range 0.05–1.50 mM with a phosphate buffer solution pH 3 as the carrier, the detection limit was 1 ppm (S/N=3). The methods were applied to the determination of AA in beverages and pharmaceutical products. A good correlation with a reference method was attained.     

Electrochemical Behavior of 8‐Azaguanine at DNA Langmuir–Blodgett Modified Glassy Carbon Electrode and Its Analytical Application

A highly sensitive electrochemical biosensor for the detection of trace amounts of 8‐azaguanine has been designed. Double stranded (ds)DNA molecules are immobilized onto a glassy carbon electrode surface with Langmuir–Blodgett technique. The adsorptive voltammetric behaviors of 8‐azaguanine at DNA‐modified electrode were explored by means of cyclic voltammetry and square wave voltammetry. Compared with bare glassy carbon electrode (GCE), the Langmuir–Blodgett film modified electrode can greatly improve the measuring sensitivity of 8‐azaguanine. Under the optimum experimental conditions, the Langmuir–Blodgett film modified electrode in pH 3.0 Britton–Robinson buffer solutions shows a linear voltammetric response in the range of 5.0×10^?8 to 1.0×10^?5 mol L^?1 with detection limit 9.0×10^?9 mol L^?1. The method proposed was applied successfully for the determination of 8‐azaguanine in diluted human urine with wonderful satisfactory.     

Selective Detection of Dopamine in Presence of Ascorbic Acid by Use of Glassy‐Carbon Electrode Modified with Amino‐β‐Cyclodextrin and Carbon Nanotubes

A glassy carbon electrode modified with per‐6‐amino‐β‐cyclodextrin (β‐CDNH₂) and functionalized single‐walled carbon nanotubes (SWCNT‐COOH) was elaborated. This structure was investigated for the detection of dopamine acid (DA) in presence of ascorbic acid (AA). The sensor behavior was studied by cyclic voltammetry, square wave voltammetry and electrochemical impedance spectroscopy. The analysis results show that the electrode modification with CD derivative improves the sensitivity and selectivity of the DA recognition; the electrochemical response was further improved by introduction of SWCNT‐COOH. The sensor shows good and reversible linear response toward DA within the concentration range of 7×10^?7–10^?4 M with a detection limit of 5×10^?7 M.