A structural and theoretical study of the intermolecular interactions in 8‐hydroxyquinolinium‐7‐carboxylate monohydrate

In the title compound, C₁₀H₇NO₃·H₂O, the zwitterionic organic molecules and the water molecules are connected by N—H...O and O—H...O hydrogen bonds to form ribbons, and π–π stacking interactions expand these ribbons into a three‐dimensional net. The energies of these hydrogen bonds adopt values typical for mildly weak interactions (3.33–7.75 kcal mol⁻¹; 1 kcal mol⁻¹ = 4.184 kJ mol⁻¹). The total π–π stacking interactions between aromatic molecules can be classified as mildly strong (energies of 15.3 and 33.9 kcal mol⁻¹), and they are made up of multiple constituent π–π interactions between six‐membered rings. The short intermolecular C—H...O contact between two zwitterionic molecules is nonbonding in character.     

An ab initio study of the structures and energetics of CH3OCl and CH3ClO

The equilibrium structures, vibrational spectra, and heats of formation for CH₃OCl and CH₃ClO have been estimated using high levels of ab initio molecular orbital theory. The lowest energy isomer is found to be CH₃OCl, and its heat of formation is estimated to be −13.5±2 kcal mol⁻¹, in good agreement with bond additivity estimates. Results for the CH₃ClO isomer are presented for the first time, and it is found to be 40.5 kcal mol⁻¹ higher in energy relative to CH₃OCl. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 73: 29–35, 1999     

Lead‐ and Iodide‐Deficient (CH3NH3)PbI3 (d‐MAPI): The Bridge between 2D and 3D Hybrid Perovskites

3D and 2D hybrid perovskites, which have been known for more than 20 years, have emerged recently as promising materials for optoelectronic applications, particularly the 3D compound (CH₃NH₃)PbI₃ (MAPI). The discovery of a new family of hybrid perovskites called d ‐MAPI is reported: the association of PbI₂ with both methyl ammonium (MA⁺) and hydroxyethyl ammonium (HEA⁺) cations leads to a series of five compounds with general formulation (MA)_1−2.48x(HEA)_3.48x[Pb_1−xI_3−x]. These materials, which are lead‐ and iodide‐deficient compared to MAPI while retaining 3D architecture, can be considered as a bridge between the 2D and 3D materials. Moreover, they can be prepared as crystallized thin films by spin‐coating. These new 3D materials appear very promising for optoelectronic applications, not only because of their reduced lead content, but also in account of the large flexibility of their chemical composition through potential substitutions of MA⁺, HEA⁺, Pb²⁺ and I⁻ ions.     

Building Blocks of Hybrid Perovskites: A Photoluminescence Study of Lead-Iodide Solution Species

In this work, we present a detailed investigation of the optical properties of hybrid perovskite building blocks, [PbI_2+n]ⁿ⁻, that form in solutions of CH₃NH₃PbI₃ and PbI₂. The absorbance, photoluminescence (PL) and photoluminescence excitation (PLE) spectra of CH₃NH₃PbI₃ and PbI₂ solutions were measured in various solvents and a broad concentration range. Both CH₃NH₃PbI₃ and PbI₂ solutions exhibit absorption features attributed to [PbI₃]¹⁻ and [PbI₄]²⁻ complexes. Therefore, we propose a new mechanism for the formation of polymeric polyiodide plumbates in solutions of pristine PbI₂. For the first time, we show that the [PbI_2+n]ⁿ⁻ species in both solutions of CH₃NH₃PbI₃ and PbI₂ exhibit a photoluminescence peak at about 760 nm. Our findings prove that the spectroscopic properties of both CH₃NH₃PbI₃ and PbI₂ solutions are dominated by coordination complexes between Pb²⁺ and I⁻. Finally, the impact of these complexes on the properties of solid-state perovskite semiconductors is discussed in terms of defect formation and defect tolerance.     

Structure determination of three furan‐substituted benzimidazoles and calculation of π–π and C—H...π interaction energies

The synthesis and structural characterization of 2‐(furan‐2‐yl)‐1‐(furan‐2‐ylmethyl)‐1H‐benzimidazole [C₁₆H₁₂N₂O₂, (I)], 2‐(furan‐2‐yl)‐1‐(furan‐2‐ylmethyl)‐1H‐benzimidazol‐3‐ium chloride monohydrate [C₁₆H₁₃N₂O₂⁺·Cl⁻·H₂O, (II)] and the hydrobromide salt 5,6‐dimethyl‐2‐(furan‐2‐yl)‐1‐(furan‐2‐ylmethyl)‐1H‐benzimidazol‐3‐ium bromide [C₁₈H₁₇N₂O₂⁺·Br⁻, (III)] are described. Benzimidazole (I) displays two sets of aromatic interactions, each of which involves pairs of molecules in a head‐to‐tail arrangement. The first, denoted set (Ia), exhibits both intermolecular C—H...π interactions between the 2‐(furan‐2‐yl) (abbreviated as Fn) and 1‐(furan‐2‐ylmethyl) (abbreviated as MeFn) substituents, and π–π interactions involving the Fn substituents between inversion‐center‐related molecules. The second, denoted set (Ib), involves π–π interactions involving both the benzene ring (Bz) and the imidazole ring (Im) of benzimidazole. Hydrated salt (II) exhibits N—H...OH₂...Cl hydrogen bonding that results in chains of molecules parallel to the a axis. There is also a head‐to‐head aromatic stacking of the protonated benzimidazole cations in which the Bz and Im rings of one molecule interact with the Im and Fn rings of adjacent molecules in the chain. Salt (III) displays N—H...Br hydrogen bonding and π–π interactions involving inversion‐center‐related benzimidazole rings in a head‐to‐tail arrangement. In all of the π–π interactions observed, the interacting moieties are shifted with respect to each other along the major molecular axis. Basis set superposition energy‐corrected (counterpoise method) interaction energies were calculated for each interaction [DFT, M06‐2X/6‐31+G(d)] employing atomic coordinates obtained in the crystallographic analyses for heavy atoms and optimized H‐atom coordinates. The calculated interaction energies are −43.0, −39.8, −48.5, and −55.0 kJ mol⁻¹ for (Ia), (Ib), (II), and (III), respectively. For (Ia), the analysis was used to partition the interaction energies into the C—H...π and π–π components, which are 9.4 and 24.1 kJ mol⁻¹, respectively. Energy‐minimized structures were used to determine the optimal interplanar spacing, the slip distance along the major molecular axis, and the slip distance along the minor molecular axis for 2‐(furan‐2‐yl)‐1H‐benzimidazole.     

Far-infrared spectra and barriers to internal rotation of ethyl nitrate

The far-infrared spectra of gaseous and solid ethyl nitrate, CH₃CH₂ONO₂, have been recorded from 500 to 50 cm⁻¹. The fundamental asymmetric torsion of the trans conformer which has a heavy atom plane has been observed at 112.50 cm⁻¹ with two excited states failing to lower frequencies, and the corresponding fundamental torsion of the gauche conformer was observed at 109.62 cm⁻¹ with two excited states also falling to lower frequencies. The results of a variable temperature Raman study indicate that the trans conformer is more stable than the gauche conformer by 328 ± 96 cm⁻¹ (938 ± 275 cal mol⁻¹). An asymmetric potential function governing the internal rotation about the CH₂O bond is reported which gives a trans to gauche barrier of 894 ± 15 cm⁻¹ (2.56 ± 0.04 kcal mol⁻¹) and a gauche to gauche barrier of 3063 ± 68 cm⁻¹ (8.76 ± 0.20 kcal mol⁻¹) with the trans conformer more stable by 220 ± 148 cm⁻¹ (0.63 ± 0.42 kcal mol⁻¹). Transitions arising from the symmetric CH₃ and NO₂ torsions are observed for both conformers, from which the threefold and twofold periodic barriers to internal rotation have been calculated. For the trans conformer the values are 1002 cm⁻¹ (2.87 kcal mol⁻¹) and 2355 ± 145 cm⁻¹ (6.73 ± 0.42 kcal mol⁻¹) and for the gauche conformer they are 981 cm⁻¹ (2.81 kcal mol⁻¹) and 2736 ± 632 cm⁻¹ (7.82 ± 1.81 kcal mol⁻¹) for the CH₃ and NO₂ rotors, respectively. These results are compared to the corresponding quantities for some similar molecules.     

A structural and theoretical study of intermolecular interactions in nicotinohydrazide dihydrochloride

In the title compound [systematic name: 3‐(azaniumylcarbamoyl)pyridinium dichloride], C₆H₉N₃O²⁺·2Cl⁻, the ions are connected by N—H...Cl hydrogen bonds to form layers and C—H...Cl interactions expand the layers into a three‐dimensional net. The energies of the N—H...Cl interactions range from typical for very weak interactions (0.17 kcal mol⁻¹) to those observed for relatively strong interactions (29.1 kcal mol⁻¹). C—H...Cl interactions can be classified as weak and mildly strong (energies ranging from 2.2 to 8.2 kcal mol⁻¹). Despite the short contacts existing between the parallel aromatic rings of the cations, π–π interactions do not occur.     

Stable and Low‐Cost Mesoscopic CH3NH3PbI2Br Perovskite Solar Cells by using a Thin Poly(3‐hexylthiophene) Layer as a Hole Transporter

Mesoscopic perovskite solar cells using stable CH₃NH₃PbI₂Br as a light absorber and low‐cost poly(3‐hexylthiophene) (P3HT) as hole‐transporting layer were fabricated, and a power conversion efficiency of 6.64 % was achieved. The partial substitution of iodine with bromine in the perovskite led to remarkably prolonged charge carrier lifetime. Meanwhile, the replacement of conventional thick spiro‐MeOTAD layer with a thin P3HT layer has significantly reduced the fabrication cost. The solar cells retained their photovoltaic performance well when they were exposed to air without any encapsulation, presenting a favorable stability. The combination of CH₃NH₃PbI₂Br and P3HT may render a practical and cost‐effective solid‐state photovoltaic system. The superior stability of CH₃NH₃PbI₂Br is also promising for other photoconversion applications.     

Halogen bonding between substituted chlorobenzene and trimethylamine: Decisive role of σ–hole and C?Cl bond breaking energy

Theoretical studies have been carried out on the halogen bonding interaction between para substituted chlorobenzene (Y C₆H₄Cl, Y = H, NH₂, CH₃, F, CN, NO₂) and N(CH₃)₃ using ab initio MP2/aug‐cc‐pVDZ and DFT based wB97XD/6‐311++G(d,p) methods. The positive electrostatic potential (V_S,max) on the Cl atom and the heterolytic bond breaking enthalpy of the C Cl bond have been calculated and their role on halogen bonding is discussed. The heterolytic bond breaking enthalpy of the C Cl bond is proposed as a measure of the strength of the σ‐hole on Cl atom. The binding strength of the complexes ranging between −6.13 kJ mol⁻¹ and −9.29 kJ mol⁻¹ are linearly related to the V_S,max of the Cl atom and the bond breaking enthalpy of the C Cl bond. In addition, energy decomposition analysis was performed on the halogen bonded complexes via symmetry adapted perturbation theory (SAPT) to predict the dominant energy component and the nature of the N···Cl interaction.     

Halogen in materials design: Chloroammonium lead triiodide perovskite (ClNH3PbI3) a dynamical bandgap semiconductor in 3D for photovoltaics

Methylammonium lead trihalides and their derivatives are photovoltaic materials. CH₃NH₃PbI₃ is the most efficient light harvester among all the known halide perovskites (PSCs). It is regarded as unsuitable for long‐term stable solar cells, thus it is necessary to develop other types of PSC materials to achieve stable PSCs (Wang et al., Nat. Energy 2016, 2, 16195). Because of this, various research efforts are on‐going to discover novel lead‐based or lead‐free single/double PSCs, which can be stable, synthesizable, transportable, abundant and efficient in solar energy conversion. Keeping these factors in mind, we report here the electronic structures, energetic stabilities and some materials properties (viz. band structures, density of states spectra and photo‐carrier masses) of the PSC chloroammonium lead triiodide (ClNH₃PbI₃). This emerges through compositional engineering that often focuses on B‐ and Y‐site substitutions within the domain of the BMY₃ PSC stoichiometry. ClNH₃PbI₃ is found to be stable as orthorhombic and pseudocubic polymorphs, which are analogous with the low and high temperature polymorphs of CH₃NH₃PbI₃. The bandgap of ClNH₃PbI₃ (values between 1.28 and 1.60 eV) is found to be comparable with that of CH₃NH₃PbI₃, (1.58 eV), both obtained with periodic DFT at the PBE level of theory. Spin orbit coupling is shown to have a pronounced effect on both the magnitude and character of the bandgap. The computed results show that ClNH₃PbI₃ may act as a competitor for CH₃NH₃PbI₃ for photovoltaics. © 2018 Wiley Periodicals, Inc.     

Influence of metal ion on chelate–aryl stacking interactions

CCSD(T)/CBS and DFT methods are employed to study the stacking interactions of acetylacetonate‐type (acac‐type) chelates of nickel, palladium, and platinum with benzene. The strongest chelate–aryl stacking interactions are formed by nickel and palladium chelate, with interaction energies of −5.75 kcal mol⁻¹ and −5.73 kcal mol⁻¹, while the interaction of platinum chelate is weaker, with interaction energy of −5.36 kcal mol⁻¹. These interaction energies are significantly stronger than stacking of two benzenes, −2.73 kcal mol⁻¹. The strongest nickel and palladium chelate–aryl interactions are with benzene center above the metal area, while the strongest platinum chelate–aryl interaction is with the benzene center above the C2 atom of the acac‐type chelate ring. These preferences arise from very different electrostatic potentials above the metal ions, ranging from very positive above nickel to slightly negative above platinum. While the differences in electrostatic potentials above metal atoms cause different geometries with the most stable interaction among the three metals, the dispersion (correlation energy) component is the largest contribution to the total interaction energy for all three metals.     

Is There an Entrance Complex for the F+NH3 Reaction?

Challenges associated with the theoretical and experimental kinetics of the F+NH₃→HF+NH₂ reaction suggest the need for a more‐precise potential surface. We have investigated the reactants and the products of the reaction, as well as the transition state and two complexes, with rather rigorous ab initio methods. The F????NH₃ complex existing in the entrance valley is predicted to lie 13.7 kcal mol^?1 below the reactants. A small classical barrier of 2.0 kcal mol^?1 separates this entrance well from products HF+NH₂. These results explain the observation by Persky of unprecedented inverse temperature dependence for the F+NH₃ rate constants. The strong hydrogen‐bonded complex FH????NH₂ exists in the exit valley, and with a binding energy of 9.9 kcal mol^?1 relative to separated products. The vibrational frequencies of all stationary points are predicted with the CCSD(T)/aug‐cc‐pVQZ method.     

Mixed‐Halide CH3NH3PbI3−xXx (X=Cl,Br, I) Perovskites: Vapor‐Assisted Solution Deposition and Application as Solar Cell Absorbers

There have been recent reports on the formation of single‐halide perovskites, CH₃NH₃PbX₃ (X=Cl, Br, I), by means of vapor‐assisted solution processing. Herein, the successful formation of mixed‐halide perovskites (CH₃NH₃PbI_3?xX_x) by means of a vapor‐assisted solution method at ambient atmosphere is reported. The perovskite films are synthesized by exposing PbI₂ film to CH₃NH₃X (X=I, Br, or Cl) vapor. The prepared perovskite films have uniform surfaces with good coverage, as confirmed by SEM images. The inclusion of chlorine and bromine into the structure leads to a lower temperature and shorter reaction time for optimum perovskite film formation. In the case of CH₃NH₃PbI_3?xCl_x, the optimum reaction temperature is reduced to 100 °C, and the resulting phases are CH₃NH₃PbI₃ (with trace Cl) and CH₃NH₃PbCl₃ with a ratio of about 2:1. In the case of CH₃NH₃PbI_3?xBr_x, single‐phase CH₃NH₃PbI₂Br is formed in a considerably shorter reaction time than that of CH₃NH₃PbI₃. The mesostructured perovskite solar cells based on CH₃NH₃PbI₃ films show the best optimal power conversion efficiency of 13.5 %, whereas for CH₃NH₃PbI_3?xCl_x and CH₃NH₃PbI_3?xBr_x the best recorded efficiencies are 11.6 and 10.5 %, respectively.     

Thin‐Film Transformation of NH4PbI3 to CH3NH3PbI3 Perovskite: A Methylamine‐Induced Conversion–Healing Process

Methylamine‐induced thin‐film transformation at room‐temperature is discovered, where a porous, rough, polycrystalline NH₄PbI₃ non‐perovskite thin film converts stepwise into a dense, ultrasmooth, textured CH₃NH₃PbI₃ perovskite thin film. Owing to the beneficial phase/structural development of the thin film, its photovoltaic properties undergo dramatic enhancement during this NH₄PbI₃‐to‐CH₃NH₃PbI₃ transformation process. The chemical origins of this transformation are studied at various length scales.     

Influence of Substituents in the Benzene Ring on the Halogen Bond of Iodobenzene with Ammonia

The effects on the C−I⋅⋅N halogen bond between iodobenzene and NH₃ of placing various substituents on the phenyl ring are monitored by quantum calculations. Substituents R=N(CH₃)₂, NH₂, CH₃, OCH₃, COCH₃, Cl, F, COH, CN, and NO₂ were each placed ortho, meta, and para to the I. The depth of the σ-hole on I is deepened as R becomes more electron-withdrawing which is reflected in a strengthening of the halogen bond, which varied between 3.3 and 5.5 kcal mol⁻¹. In most cases, the ortho placement yields the largest perturbation, followed by meta and then para, but this trend is not universal. Parallel to these substituent effects is a progressive lengthening of the covalent C−I bond. Formation of the halogen bond reduces the NMR chemical shielding of all three nuclei directly involved in the C−I⋅⋅N interaction. The deshielding of the electron donor N is most closely correlated with the strength of the bond, as is the coupling constant between I and N, so both have potential use as spectroscopic measures of halogen bond strength.     

Density Functional Theory Studies on Intermolecular Interactions of 4‐Amino‐3,5‐dinitropyrazole with NH3 and H2O

Density functional theory (DFT) method with 6‐311++G** basis set was applied to study intermolecular interactions of 4‐amino‐3,5‐dinitropyrazole (LLM‐116)/NH₃ and LLM‐116/H₂O supermolecules. Four optimized stable supermolecules were found on the potential energy surface. The intermolecular interaction energy was calculated with basis set superposition error (BSSE) correction and zero point energy (ZPE) correction. The greatest corrected intermolecular interaction energies of LLM‐116/NH₃ and LLM‐116/H₂O supermolecules are –42.75 and –19.09 kJ×mol^‐1 respectively, indicating that the intensity of interaction between LLM‐116 and NH₃ is stronger than that of LLM‐116/H₂O. The intermolecular interaction is an exothermic process accompanied by a decrease in the probability of supermolecules formation, and the interactions become weak as temperature increase. Natural bond orbital (NBO) analysis was performed to reveal the origin of interaction. The IR spectra were obtained and assigned by vibrational analysis. Based on vibrational analysis, the changes of thermodynamic properties from LLM‐116 to supermolecules with temperature ranging from 200.0 to 400.0 K were obtained using statistical thermodynamic method.     

Far-IR spectrum,conformation stability,barriers to internal rotation,vibrational assignment,and ab initio calculations of 3-chloro-2-methylpropene

The far-IR spectrum from 375 to 30 cm⁻¹ of gaseous 3-chloro-2-methylpropene, CH₂=C(CH₃)CH₂Cl, has been recorded at a resolution of 0.10 cm⁻¹. The fundamental asymmetric torsional mode for the gauche conformer is observed at 84.3 cm⁻¹ with three excited states falling to lower frequency. For the higher energy s-cis conformer, where the chlorine atom eclipses the double bond, the asymmetric torsion is observed at 81.3 cm⁻¹ with two excited states falling to lower frequency. Utilizing the s-cis and gauche torsional frequencies, the gauche dihedral angle and the enthalpy difference between conformers, the potential function governing the interconversion of the rotamers has been calculated. The determined potential function coefficients are (in reciprocal centimeters): V₁=189±12, V₂=−358±11, V₃=886±2 and V₄=−12±2 with an enthalpy difference between the more stable gauche and s-cis conformers of 150 ±25 cm⁻¹ (430 ± 71 cal mol⁻¹). This function gives values of 661 cm⁻¹ (1.89 kcal mol⁻¹), 1226 cm⁻¹ (3.51 kcal mol⁻¹) and 812 cm⁻¹ (2.32 kcal mol⁻¹), for the s-cis to gauche, gauche to gauche, and gauche to s-cis barriers, respectively. From the methyl torsional frequency of 170 cm⁻¹ for the gauche conformer, the threefold barrier of 678 cm⁻¹ (1.94 kcal mol⁻¹) has been calculated. The asymmetric potential function, conformational energy difference and optimized geometries of both conformers have also been obtained from ab initio calculations with both the 3–21G^* and 6–31G^* basis sets. A normal-coordinate analysis has also been performed with a force field determined from the 3–21G^* basis set. These data are compared with the corresponding data for some similar molecules.     

Theoretical Investigations on the Agostic Interactions of the Molybdenum and Manganese Complexes

The essential participation of agostic interactions in C−H bond activation, cyclometallation and other catalytic processes has been widely observed. To quantitatively evaluate the Mo−H−C agostic interaction in the Mo β/γ- agostomers [CpMo(CO)₂(PiPr₃)]⁺ ( Mo , 1 and Mo , 2 ) and the Mn−H−C agostic interaction in the Mn α/ϵ-agostomers [(C₆H₉]Mo(CO)₃] ( Mn , 1 and Mn , 2 ), the comprehensive density functional theory (DFT) theoretical investigations were performed. Results indicated that the Mo β-agostomer 1 is only favorable by 0.5 kcal mol⁻¹ than Mo γ-agostomer 2 , and the Gibbs barrier for their interconversion was 9.1 kcal mol⁻¹. A slightly higher Gibbs barrier of 12.7 kcal mol⁻¹ for the isomerization between the Mn α/ϵ-agostomers was also obtained. The relatively strong agostic interactions in Mo β-agostomer 1 and Mn α-agostomer 1 were further verified by the AIM (Atoms-In-Molecules) analyses and the NAdOs (natural adaptive orbitals) analyses. The findings on the agostic interaction presented in this study are believed to benefit the understandings of the agostic interaction involved catalytic processes and to promote the development of new organometallic complexes.     

Energetic Ordering of Hydrogen Bond Strengths in Methanol-Water Clusters: Insights via Molecular Tailoring Approach

In this work, we examine the strength of various types of individual hydrogen bond (HB) in mixed methanol-water M_nW_m, (n+m=2 to 7) clusters, with an aim to understand the relative order of their strength, using our recently proposed molecular tailoring-based approach (MTA). Among all the types of HB, it is observed that the O_M−H…O_W HBs are the strongest (6.9 to 12.4 kcal mol⁻¹). The next ones are O_M−H…O_M HBs (6.5 to 11.6 kcal mol⁻¹). The O_W−H…O_W (0.2 to 10.9 kcal mol⁻¹) and O_W−H…O_M HBs (0.3 to 10.3 kcal mol⁻¹) are the weakest ones. This energetic ordering of HBs is seen to be different from the respective HB energies in the dimer i. e., O_M−H…O_M (5.0 to 6.0 kcal mol⁻¹)>O_W−H…O_M (1.5 to 6.0 kcal mol⁻¹)>O_M−H…O_W (3.8 to 5.6 kcal mol⁻¹)>O_W−H…O_W (1.2 to 5.0 kcal mol⁻¹). The plausible reason for the difference in the HB energy ordering may be attributed to the increase or decrease in HB strengths due to the formation of cooperative or anti-cooperative HB networks. For instance, the cooperativity contribution towards the different types of HB follows: O_M−H…O_W (2.4 to 8.6 kcal mol⁻¹)>O_M−H…O_M (1.3 to 6.3 kcal mol⁻¹)>O_W−H…O_W (−1.0 to 6.5 kcal mol⁻¹)>O_W−H…O_M (−1.2 to 5.3 kcal mol⁻¹). This ordering of cooperativity contribution is similar to the HB energy ordering obtained by the MTA-based method. It is emphasized here that, the interplay between the cooperative and anti-cooperative contributions are indispensable for the correct energetic ordering of these HBs.     

Ultrafast Photogenerated Hole Extraction/Transport Behavior in a CH3NH3PbI3/Carbon Nanocomposite and Its Application in a Metal‐Electrode‐Free Solar Cell

Aligned and flexible electrospun carbon nanomaterials are used to synthesize carbon/perovskite nanocomposites. The free‐electron diffusion length in the CH₃NH₃PbI₃ phase of the CH₃NH₃PbI₃/carbon nanocomposite is almost twice that of bare CH₃NH₃PbI₃, and nearly 95 % of the photogenerated free holes can be injected from the CH₃NH₃PbI₃ phase into the carbon nanomaterial. The exciton binding energy of the composite is estimated to be 23 meV by utilizing temperature‐dependent optical absorption spectroscopy. The calculated free carriers increase with increasing total photoexcitation density, and this broadens the potential of this material for a broad range of optoelectronics applications. A metal‐electrode‐free perovskite solar cell (power conversion efficiency: 13.0 %) is fabricated with this perovskite/carbon composite, which shows great potential for the fabrication of efficient, large‐scale, low‐cost, and metal‐electrode‐free perovskite solar cells.