Electromembrane extraction and capillary electrophoresis with capacitively coupled contactless conductivity detection: Multi‐extraction capabilities to analyses trace metals from saline samples

Simultaneous electromembrane extraction (EME) of six trace metal cations (Cu²⁺, Zn²⁺, Co²⁺, Ni²⁺, Pb²⁺, Cd²⁺) from saline samples was investigated. CE with capacitively coupled contactless conductivity detection (C⁴D) was used to determine the metals in acceptor solutions due to its excellent compatibility with the minute volumes of acceptor solutions. Bis(2‐ethylhexyl)phosphate (DEHPA) was selected as a suitable nonselective modifier for EME transport of target metal cations. Both, the individual effect of each major inorganic cation (Na⁺, K⁺, Ca²⁺, Mg²⁺) and their synergistic effect on EME of the trace metal cations were evaluated. In both cases, a decrease in extraction efficiency was observed when major inorganic cations were present in the sample. This effect was more significant for Ca²⁺ and Mg²⁺. The system was optimized for simultaneous extractions of the six target metals from saline samples (50 mM Na⁺, 5 mM Mg²⁺, 1 mM K⁺, and 1 mM Ca²⁺) and following EME conditions were applied. Organic phase consisted of 1‐nonanol containing 1% (v/v) DEHPA, acceptor solution was 1 M acetic acid (HAc) and sample pH was adjusted to 5. Sample was stirred at 750 rpm and EMEs were carried out at extraction potential of 10 V for 20 min. The method presented a repeatability between 8 and 21.8% (n = 5), good linearity in 0.5–10 μM concentration range (R² = 0.987‐0.999) and LOD better than 2.6 nM. Applicability of the EME–CE–C⁴D method to the analyses of metal cations in drinking water, seawater, and urine samples was also demonstrated.     

Indirect ultraviolet detection of alkaline earth metal ions using an imidazolium ionic liquid as an ultraviolet absorption reagent in ion chromatography

A convenient and versatile method was developed for the separation and detection of alkaline earth metal ions by ion chromatography with indirect UV detection. The chromatographic separation of Mg²⁺, Ca²⁺, and Sr²⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid as the mobile phase, in which the imidazolium ionic liquid acted as an UV‐absorption reagent. The effects of imidazolium ionic liquids, detection wavelength, acids in the mobile phase, and column temperature on the retention of Mg²⁺, Ca²⁺, and Sr²⁺ were investigated. The main factors influencing the separation and detection were the background UV absorption reagent and the concentration of hydrogen ion in ion chromatography with indirect UV detection. The successful separation and detection of Mg²⁺, Ca²⁺, and Sr²⁺ within 14 min were achieved using the selected chromatographic conditions, and the detection limits (S /N = 3) were 0.06, 0.12, and 0.23 mg/L, respectively. A new separation and detection method of alkaline earth metal ions by ion chromatography with indirect UV detection was developed, and the application range of ionic liquids was expanded.     

Affinity capillary electrophoresis employed for determination of stability constants of antamanide complexes with univalent and divalent cations in methanol

Affinity capillary electrophoresis (ACE) and pressure‐assisted ACE were employed to study the noncovalent molecular interactions of antamanide (AA), cyclic decapeptide from the deadly poisonous fungus Amanita phalloides, with univalent (Li⁺, Na⁺, K⁺, and NH₄⁺) and divalent (Mg²⁺ and Ca²⁺) cations in methanol. The strength of these interactions was quantified by the apparent stability constants of the appropriate AA‐cation complexes. The stability constants were calculated using the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of AA on the concentration of the above ions in the BGE (methanolic solution of 20 mM chloroacetic acid, 10 mM Tris, pH_MeOH 7.8, containing 0–50 mM concentrations of the above ions added in the form of chlorides). Prior to stability constant calculation, the AA effective mobilities measured at actual temperature inside the capillary and at variable ionic strength of the BGEs were corrected to the values corresponding to the reference temperature of 25°C and to the constant ionic strength of 10 mM. From the above ions, sodium cation interacted with AA moderately strong with the stability constant 362 ± 16 L/mol. K⁺, Mg²⁺, and Ca²⁺ cations formed with AA weak complexes with stability constants in the range 37–31 L/mol decreasing in the order K⁺ > Ca²⁺ > Mg²⁺. No interactions were observed between AA and small Li⁺ and large NH₄⁺ cations.     

ESI‐MS studies of the non‐covalent interactions between biologically important metal ions and N‐sulfonylcytosine derivatives

The aim of this report is to present the electrospray ionization mass spectrometry results of the non‐covalent interaction of two biologically active ligands, N‐1 ‐ (p‐toluenesulfonyl)cytosine, 1‐TsC, 1 and N‐1 ‐ methanesulfonylcytosine, 1‐MsC, 2 and their Cu(II) complexes Cu(1‐TsC‐N3)₂Cl₂, 3 and Cu(1‐MsC‐N3)₂Cl₂ and 4 with biologically important cations: Na⁺, K⁺, Ca²⁺, Mg²⁺ and Zn²⁺. The formation of various complex metal ions was observed. The alkali metals Na⁺ and K⁺ formed clusters because of electrostatic interactions. Ca²⁺ and Mg²⁺ salts produced the tris ligand and mixed ligand complexes. The interaction of Zn²⁺ with 1–4 produced monometal and dimetal Zn²⁺ complexes as a result of the affinity of Zn²⁺ ions toward both O and N atoms. Copyright © 2016 John Wiley & Sons, Ltd.     

Capillary ion electrophoresis-capacitively coupled contactless conductivity detection of inorganic cations in human saliva on a polyvinyl alcohol-coated capillary

Capillary ion electrophoresis–capacitively coupled contactless conductivity detection (CIE-C4D) with a polyvinyl alcohol chemically coated capillary (PVA capillary) was used to analyze inorganic cations (Na⁺, K⁺, NH₄⁺, Mg²⁺, and Ca²⁺) commonly found in human saliva. The PVA capillary, which was made by our laboratory, minimized electro-osmotic flow in the wide pH range of the background electrolyte (BGE), and the PVA layer adsorbed to capillary wall did not affect the conductimetric background level. In this study, we determined an optimized BGE of 30 mM lactic acid/histidine plus 3 mM 18-crown-6 for the CIE-C4D system using the PVA capillary, which could simultaneously improve the separation of Mg²⁺ and Ca²⁺ from Na⁺ and that of K⁺ from NH₄⁺. This system obtained highly reproducible separation of cations in human saliva samples within 8 min at 20 kV without deprotonation. The quantifiability of cations in human saliva samples on the CIE-C4D system was demonstrated through identification by ion chromatography with satisfactory results.     

Effect of counterion condensation on the acid-base equilibrium of a pH-sensitive merocyanine dye covalently attached to polyelectrolytes

Effects of monovalent and divalent counterions on the acid-base equilibrium of a pH-sensitive merocyanine dye covalently attached to copolymers of acrylic acid and acrylamide with varying charge densities (0.28 < ξ < 2.8) were investigated. Added chloride salts of Li⁺, Na⁺, K⁺, and NH⁺₄ (< 0.2 mM) had essentially no effect on pK observed (pK^obs) for the equilibrium. By contrast, the salts of Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ caused a significant decrease in pK^obs for the copolymers with larger ξ. With smaller ξ, most likely when ξ < 0.5, no decrease in pK^obs was observed upon addition of the salts of divalent cations. A competitive effect of Ca²⁺ and Na²⁺ ions on pK^obs in the presence of an excess of Na⁺ ions implied that Ca²⁺ ions at very low concentrations were preferentially, and therefore exhaustively, condensed on the polyanions with sufficiently large ξ probably until effective charge density was lowered to 0.5. The observed difference in the influence of the monovalent and divalent cations on pK^obs was discussed in terms of the difference in the microscopic behavior of the condensed monovalent and divalent cations. © 1993 John Wiley & Sons, Inc.     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Effect of ring annelation on cations [M = H+, Li+, Na+, K+, Be2+, Mg2+, and Ca2+]…benzene interaction: A density functional theory investigation

Density functional theory calculation was carried out on cation‐π complexes formed by cations [M = H⁺, Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺] and π systems of annelated benzene. The cation‐π bonding energy of Be²⁺ or Mg²⁺ with annelated benzene is very strong in comparison with the common cation‐π intermolecular interaction, and the bonding energies follow the order Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. Similarly, the interaction energies follow the trend 1‐M < 2‐M < 3‐M for all the metal cations considered. These outcomes may be due to the weak interactions of the metal cations with C? H and the interactions of metal cations with π in addition to the nature of a metal cation. We have also investigated on all the possible substituted sites, and find that the metal ion tends to interact with all ring atoms while proton prefers to bind covalently to one of the ring carbons. The binding of metal cations with annelated benzenes has striking effect on nuclear magnetic resonance chemical shifts using the gauge independent atomic orbital method. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Ions Can Move a Proton‐Coupled Electron‐Transfer Reaction into Tunneling Regime

The effects of charged species on proton‐coupled electron‐transfer (PCET) reaction should be of significance for understanding/application of important chemical and biological PCET systems. Such species can be found in proximity of activated complex in a PCET reaction, although they are not involved in the charge transfer process. Reported here is the first study of the above‐mentioned effects. Here, the effects of Na⁺, K⁺, Li⁺, Ca²⁺, Mg²⁺, and Me₄N⁺ observed in PCET reaction of ascorbate monoanions with hexacyanoferrate(III) ions in H₂O reveal that, in presence of ions, this over‐the‐barrier reaction entered into tunneling regime. The observations are: a) dependence of the rate constant on the cation concentration, where the rate constant is 71 (at I = 0.0023), and 821 (at 0.5M K⁺), 847 (at 1.0M Na⁺), and 438 M ^?1 s^?1 (at 0.011M Ca²⁺); b) changes of kinetic isotope effect (KIE) in the presence of ions, where k_H/k_D=4.6 (at I = 0.0023), and 3.4 (in the presence of 0.5M K⁺), 3.3 (at 1.0M Na⁺), 3.9 (at 0.001M Ca²⁺), and 3.9 (at 0.001M Mg²⁺), respectively; c) the isotope effects on Arrhenius pre‐factor where A_H/A_D=0.97 (0.15) in absence of ions, and 2.29 (0.60) (at 0.5M Na⁺), 1.77 (0.29) (at 1.0M Na⁺), 1.61 (0.25) (at 0.5M K⁺), 0.42 (0.16) (at 0.001M Ca²⁺) and 0.16 (0.19) (at 0.001M Mg²⁺); d) isotope differences in the enthalpies of activation in H₂O and in D₂O, where ΔΔH^?(D,H)=3.9 (0.4) kJ mol^?1 in the absence of cations, 1.3 (0.6) at 0.5M Na⁺, 1.8 (0.4) at 0.5M K⁺, 1.5 (0.4) at 1.0M Na⁺, 5.5 (0.9) (at 0.001M Ca²⁺), and 7.9 (2.8) (at 0.001M Mg²⁺) kJ mol^?1; e) nonlinear proton inventory in reaction. In the H₂O/dioxane 1 : 1, the observed KIE is 7.8 and 4.4 in the absence and in the presence of 0.1M K⁺, respectively, and A_H/A_D=0.14 (0.03). The changes when cations are present in the reaction are explained in terms of termolecular encounter complex consisting of redox partners, and the cation where the cation can be found in a near proximity of the reaction‐activated complex thus influencing the proton/electron double tunneling event in the PCET process. A molecule of H₂O is involved in the transition state. The resulting ‘configuration’ is more ‘rigid’ and more appropriate for efficient tunneling with Na⁺ or K⁺ (extensive tunneling observed), i.e., there is more precise organized H transfer coordinate than in the case of Ca²⁺ and Mg²⁺ (moderate tunneling observed) in the reaction.     

A New Fluorescent Chemosensor for Cu2+ Based on 1,2,3,4,5,6,7,8,9,10‐Decahydroacridine‐1,8‐dione Fluorophore

A new chemosensor for Cu²⁺ was synthesized based on 1,2,3,4,5,6,7,8,9,10‐decahydroacridine‐1,8‐dione dyes, which exhibited an obvious fluorescent selectivity to the sensing of Cu²⁺ ions over other cations, such as Na⁺, K⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Ag⁺ and Pb²⁺. Moreover, it presented a fluorescent switch function when EDTA was added to the compound‐Cu²⁺ complex in examined systems.     

A theoretical study of cation--π interactions: Li+, Na+, K+, Be2+, Mg2+ and Ca2+ complexation with mono- and bicyclic ring-fused benzene derivatives

DFT (B3LYP functional) and MP2 methods using 6-311+G(2d,2p) basis set have been employed to examine the effect of ring fusion to benzene on the cation--π interactions involving alkali metal ions (Li⁺, Na⁺, and K⁺) and alkaline earth metal ions (Be²⁺, Mg²⁺ and Ca²⁺). Our present study indicates that modification of benzene (π-electron source) by fusion of monocyclic or bicyclic (or mixture of these two kinds of rings) strengthens the binding affinity of both alkali and alkaline earth metal cations. The strength of interaction decreases in the following order: Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺ for any considered aromatic ligand. The interaction energies for the complexes formed by divalent cations are 4–6 times larger than those for the complexes involving monovalent cations. The structural changes in the ring wherein metal ion binds are examined. The distance between ring centroid and the metal ion is calculated for all of the complexes. Strained bicyclo[2.1.1]hexene ring fusion has substantially larger effect on the strength of cation--π interactions than the monocyclic ring fusion for all of the cations due to the π-electron localization at the central benzene ring.     

Ion chromatography with the indirect ultraviolet detection of alkali metal ions and ammonium using imidazolium ionic liquid as ultraviolet absorption reagent and eluent

Indirect ultraviolet detection was conducted in ultraviolet‐absorption‐agent‐added mobile phase to complete the detection of the absence of ultraviolet absorption functional group in analytes. Compared with precolumn derivatization or postcolumn derivatization, this method can be widely used, has the advantages of simple operation and good linear relationship. Chromatographic separation of Li⁺, Na⁺, K⁺, and NH₄⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid/organic solvent as the mobile phase, in which imidazolium ionic liquids acted as ultraviolet absorption reagent and eluting agent. The retention behaviors of four kinds of cations are discussed, and the mechanism of separation and detection are described. The main factors influencing the separation and detection were the background ultraviolet absorption reagent and the concentration of hydrogen ion in the ion chromatography‐indirect ultraviolet detection. The successful separation and detection of Li⁺, Na⁺, K⁺, and NH₄⁺ within 13 min was achieved using the selected chromatographic conditions, and the detection limits (S/N = 3) were 0.02, 0.11, 0.30, and 0.06 mg/L, respectively. A new separation and analysis method of alkali metal ions and ammonium by ion chromatography with indirect ultraviolet detection method was developed, and the application range of ionic liquid was expanded.     

Preparation of a hybrid monolithic stationary phase with allylsulfonate for the rapid and simultaneous separation of cations in capillary ion chromatography

A hybrid monolithic column with sulfonate functionality was successfully prepared for the simultaneous separation of common inorganic cations in ion‐exchange chromatographic mode through a simple and easy single‐step preparation method. The strong cation‐exchange moieties were provided directly from allylsulfonate, which worked as an organic monomer in the single‐step reaction. Inorganic cations (Li⁺, Na⁺, K⁺, NH₄⁺, Cs⁺, Rb⁺, Mg²⁺, Ca²⁺, and Sr²⁺) were separated satisfactorily by using CuSO₄ as the eluent with indirect UV detection. The allysulfonate hybrid monolith showed a better performance in terms of speed and pressure drop than the capillary packed column. The number of theoretical plates achieved was 19 017 plates/m (in the case of NH₄⁺ as the analyte). The relative standard deviations (n = 6) of both retention time and peak height were less than 1.96% for all the analyte cations. The allysulfonate hybrid monolithic column was successfully applied for the rapid and simultaneous separation of inorganic cations in groundwater and the effluent of onsite domestic wastewater treatment system.     

Studies on Synthesis of a Cycloheptapeptide and Effects of Different Metal Ions on the Cyclization

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｉｃｐｅｐｔｉｄｅｓ ,ｗｈｉｃｈａｒｅｃｏｎｓｔｒａｉｎｅｄｃｏｎｆｏｒｍａ ｔｉｏｎａｌｌｙａｎｄｍｏｒｅｒｅｓｉｓｔａｎｔｔｏｐｒｏｔｅａｓｅｄｉｇｅｓｔｉｏｎｓｔｈａｎｔｈｅｉｒｌｉｎｅａｒｐｒｅｃｕｒｓｏｒｓ ,ｈａｖｅｂｅｅｎｏｆｇｒｅａｔｉｎｔｅｒｅｓｔａｓｓｙｎｔｈｅｔｉｃｔａｒｇｅｔｓｂｏｔｈａｓｐｏｔｅｎｔｉａｌｄｒｕｇｌｅａｄｓａｎｄａｓｍｏｄｅｌｓｆｏｒｃｏｎ ｆｏｒｍａｔｉｏｎａｌａｎａｌｙｓｉｓ .1 4 Ｃｕｒｒｅｎｔｍｅｔｈｏｄｓｆｏｒｓｙｎｔ…     

Application of localized reactivity index in combination with periodic DFT calculation to rationalize the swelling mechanism of clay type inorganic material

Clays are layered alumino-silicates. Clays swell and expand in aqueous solution. This property governs the usage of these materials in synthesis of nano-composites and is a source of many of its catalytic applications. We used both localized and periodic calculations within the realm of density functional theory (DFT) on a series of monovalent (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), and divalent (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺) cations, to monitor their effect on the swelling of clays. The activity order obtained for the exchangeable cations among all the monovalent and divalent series studied is: Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺ > K⁺. We have studied two types of clays, montmorillonite and beidellite, with different surface structures and with/without water using periodic calculations. We have calculated the layer spacing at the first, second and third hydration shells of exchangeable cation, to compare with the experimentald-spacing values to correlate with humidity. A novel quantitative scale is proposed in terms of the intermolecular relative nucleophilicity of the active cation sites in their hydrated state through Fukui functions using hard-soft acid base (HSAB) principle. Finally, a swelling mechanism is proposed. This is a unique study where a combination of periodic and localized calculations has been performed to validate the capability of reactivity index calculations in material designing.     

Separation of Monovalent and Divalent Cations on a Pure Silica Gel Column with Dilute Oxalic Acid Containing 18-Crown-6 as Mobile Phase

Summary Pure silica gel (Pia Seed 5S-60-SIL) has been investigated as a cation-exchange stationary phase for ion chromatography of common monovalent and divalent cations (Li⁺, Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) with conductimetric detection; dilute oxalic acid (0.05 mm oxalic acid, pH 4.1, to 1 mm oxalic acid, pH 3.0) was used as mobile phase. The Pia Seed 5S-60-SIL silica gel acted as a cation-exchange stationary phase for these cations when 0.2 mm oxalic acid at pH 3.6 was used as the mobile phase. Excellent simultaneous separation and highly sensitive indirect conductimetric detection of these cations were achieved in 20 min on a 150 mm × 4.6 mm i.d. Pia Seed 5S-60-SIL silica gel column with 0.2 mm oxalic acid containing 4 mm 18-crown-6 (1,4,7,10,13,16-hexaoxacycloctadecane), pH 3.7, as mobile phase (detection limits (signal-to-noise ratio, 3, injection volume, 20 L), were 0.15 m for Li⁺, 0.16 m for Na⁺, 0.21 m for NH₄⁺, 1.0 m for K⁺, 0.17 m for Mg²⁺, and 0.25 m for Ca²⁺). The proposed IC–CD method was successfully applied to the separation and detection of major cations (Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) in rain and river water samples.     

Simultaneous Determination of Na+, K+, Ca2+, Mg2+ and Cl− in Unstimulated and Stimulated Human Saliva Using All Solid State Multisensor Platform

Human saliva is one of the body fluids which collection method is relatively simple and non‐invasive. The article is dedicated to assess concentration (activity) of Na⁺, K⁺, Ca²⁺, Mg²⁺ and Cl⁻ in fresh, unstimulated or stimulated human saliva samples using single solid contact ion‐selective electrodes with conventional reference electrode and self‐made multisensor platform (MP) equipped with ion‐selective membranes for Na⁺, K⁺, Ca²⁺, Mg²⁺ and Cl⁻ and reference electrode made in solid state technology, based on dispersed KCl in the polymer. Both kind of electrodes, single ISE and miniaturized electrodes in multisensor platform (ISE‐MP) were made of glassy carbon. The electrode surfaces have been modified by conductive polymer (PEDOT) layer deposition; with the exception of Cl⁻ electrode, in which conducting polymer was not applied. Potentiometric measurements were used to compare the changes of the ionic composition in various samples of saliva.     

A selective colorimetric chemosensor for lanthanide ions

The synthesis and complexing properties of a calix[4]arene derivate (6) carrying two spirobenzopyran moieties are described. The addition of lanthanide ions resulted in significant UV-vis spectral shifts (68-84 nm) in visible region. It indicates that the synthetic receptor can recognize lanthanide ions by naked eyes over other cations including Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Cu²⁺ and Zn²⁺. The mechanism of recognition was studied with ¹H NMR, UV-vis spectra and emission spectra. The receptor may be applied to sense lanthanide ions.     

Indirect Photometric Detection and Determination of Some Inorganic Cations in Anti-Asthmatic Homeopathic Pharmaceuticals by CE

A capillary electrophoretic (CE) method has been optimized for the separation of some common alkali and alkaline-earth metal cations in anti-asthmatic homeopathic liquid pharmaceutical preparations. Separation was carried out on a 74 cm (62.5 cm to the detector) × 75 μm ID fused silica capillary at a potential of 25 kV and 25 °C. Baseline separation of NH₄ ⁺, K⁺, Ca²⁺, Na⁺, Mg²⁺ and Li⁺ was achieved in less than 4.5 min. The proposed method was applied for the determination of the above-mentioned ions in homeopathic liquid formulations. Limits of quantitation (LOQ) observed were 1.5 ppm for NH₄ ⁺, Ca²⁺ and Mg²⁺ 0.8 ppm for Na⁺, 1.6 ppm for K⁺, and 0.4 ppm for Li⁺. During electrophoresis, the ingredients used in the preparation of homeopathic formulation did not interfere with the cations examined.     

Facilitated Transfer of Alkali and Alkaline‐Earth Metal Ions by a Calix[4]arene Derivative Across Water/1,2‐Dichloroethane Microinterface: Amperometric Detection of Ca2+

The host–guest complexation reactions between 5,11,17,23‐tetra‐tert‐butyl‐25,27‐diethoxycarbonylmethoxy‐26,28‐dimethoxy calix[4]arene (BDDC4) and alkali and alkaline‐earth metal ions were investigated by facilitated ion transfer processes across water/1,2‐dichloroethane microinterface by using steady‐state cyclic voltammetry and differential pulse voltammetry. The obtained facilitated transfers for Li⁺, Na⁺, K⁺, Rb⁺ and Ca²⁺ were evaluated under the different experimental conditions, at the excess concentrations of metal ions with respect to BDDC4 and vice versa. The association constants having 1 : 1 stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2‐DCE were determined. Also, we demonstrated that BDDC4 can play an important role for the development of highly selective chemical sensor for Ca²⁺ among alkaline‐metal ions in the concentration range of 0.1–1.0 mM in aqueous solution.