Molecularly imprinted covalent organic polymers for the selective extraction of benzoxazole fluorescent whitening agents from food samples

Molecularly imprinted covalent organic polymers were constructed by an imine‐linking reaction between 1,3,5‐triformylphloroglucinol and 2,6‐diaminopyridine and used for the selective solid‐phase extraction of benzoxazole fluorescent whitening agents from food samples. Binding experiments showed that imprinting sites on molecularly imprinted polymers had higher selectivity for targets compared with those of the corresponding non‐imprinted polymers. Parameters affecting the solid‐phase extraction procedure were examined. Under optimal conditions, actual samples were treated and the eluent was analyzed with high‐performance liquid chromatography with diode‐array detection. The results showed that the established method has a wide linearity, satisfactory detection limits and quantification limits, and acceptable recoveries. Thus, this developed method possesses the practical potential for the selective determination of benzoxazole fluorescent whitening agents in complex food samples.     

Utilization of O-phthalaldehyde-sulphuric acid as a spray reagent in thin-layer chromatographic detection of some indolealkylamines and application to cutaneous secretion extracts of toad species

An expansion of the utilisation of o-phthalaldehyde in sulphuric acid medium as spray reagent was carried out when tryptophan and some tryptophan-derived indole alkylamines such as tryptamine, serotonin, bufotenine, dehydrobufotenine and bufotenidine were examined by thin-layer chromatography. Rf-values and limits of detection ranging from 20 (serotonin) to 100 (dehydrobufotenine) ng per spot were found. Application of this reagent for the detection of some of these compounds was carried out, using either methanolic extracts or column chromatographic fractions of the skin secretion of the toads Bufo ictericus and Odontophrynus cultripes.     

Imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide for the determination of m‐cresol in synthetic and real samples

m‐Cresol‐imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide have been developed that contain specific pockets for the selective uptake of m‐cresol. Silica nanoparticles were synthesized by a sol–gel process followed by functionalization of their surface with N‐propylsilylmorpholine‐4‐carboxamide. The formation of m‐cresol‐imprinted silica nanoparticles was confirmed by UV‐Vis spectrophotometry, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. Electron microscopic studies revealed the formation of monodispersed imprinted silica nanoparticles with spherical shape and an average size of 83 nm. The developed nanoparticles were filled in a syringe and used for the extraction of m‐cresol from aqueous samples followed by quantification using high‐performance liquid chromatography with diode array detection. Various adsorption experiments showed that developed m‐cresol‐imprinted silica nanoparticles exhibited a high adsorption capacity and selectivity and offered a fast kinetics for rebinding m‐cresol. The chromatographic quantification was achieved using mobile phase consisting of acetonitrile/water (70:30 v/v) at an isocratic flow rate of 1.0 mL/min using a reversed‐phase C₁₈ column and detection at λ_max = 275 nm. The limits of detection and quantification were 1.86 and 22.32 ng/mL, respectively, for the developed method. The percent recoveries ranged from 96.66–103.33% in the spiked samples. This combination of this nanotechnique with molecular imprinting was proved as a reliable, sensitive and selective method for determining the target from synthetic and real samples.     

Analytical approach to determine biogenic amines in urine using microextraction in packed syringe and liquid chromatography coupled to electrochemical detection

The goal of this work was to develop and validate an analytical method for the detection and quantification of the biogenic amines serotonin (5‐HT), dopamine (DA) and norepinephrine (NE), using microextraction in packed syringe (MEPS) and liquid chromatography coupled to electrochemical detection (HPLC‐ED) in urine. The method was validated according to internationally accepted guidelines from the Food and Drug Administration. Linearity was established between 50 and 1000 ng/mL for 5‐HT and between 5 and 1000 ng/mL for DA and NE, with determination coefficients (R²) >0.99 for all compounds. The limits of quantification and detection were respectively 50 and 20 ng/mL for 5‐HT, and 5 and 2 ng/mL for DA and NE. Within‐ and between‐run precision ranged from 0.84 to 9.41%, while accuracy ranged from 0.79 to 12.76% for all compounds. The intermediate precision and accuracy were 1.50–8.36 and 0.54–13.51%, respectively. The method was found suitable for clinical routine analysis of the studied compounds, using a sample volume of 0.5 mL. This is the first study employing a commercially available MEPS column for the simultaneous detection and quantification of 5‐HT, DA and NE in urine by coulometric detection. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of macrolide antibiotics residues in pork using molecularly imprinted dispersive solid‐phase extraction coupled with LC–MS/MS

A class‐specific macrolide molecularly imprinted polymer was synthesized by precipitation polymerization using tulathromycin as the template and methacrylic acid as the functional monomer. The polymers revealed different specific adsorption and imprinting factor for macrolides with different spatial arrangement of side chains as well as lactonic ring size. And the molecularly imprinted polymer possessed maximum adsorption capacity (54.1 mg/g) and highest imprinting factor (2.4) toward 15‐membered ring azithromycin. On the basis of molecularly imprinted polymer dispersive solid‐phase extraction, a rapid, selective, and reproducible method for simultaneous determination of seven macrolide antibiotics residues in pork was established by using liquid chromatography with tandem mass spectrometry. At spiking levels of 5, 10, 25, and 100 μg/kg, average recoveries of seven macrolides ranged from 68.6 to 95.5% with intraday and interday relative standard deviations below 8%. The limits of detection and limits of quantification were 0.2–0.5 and 0.5–2.0 μg/kg, respectively.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Simultaneous determination of 10 kinds of biogenic amines in rat plasma using high‐performance liquid chromatography coupled with fluorescence detection

We describe a simple, rapid, selective and sensitive HPLC method coupled with fluorescence detection for simultaneous determination of 10 kinds of biogenic amines (BAs: tryptamine, 2‐phenethylamine, putrescine, cadaverine, histamine, 5‐hydroxytryptamine, tyramine, spermidine, dopamine and spermine). BAs and IS were derivated with dansyl chloride. Fluorescence detection (λ_ex/λ_em = 340/510 nm) was used. A satisfactory result for method validation was obtained. The assay was shown to be linear over the ranges 0.005–1.0 μg/mL for tryptamine, 2‐phenethylamine and spermidine, 0.025–1.0 μg/mL for putrescine, 0.001–1.0 μg/mL for cadaverine, 0.25–20 μg/mL for histamine, 0.25–10 μg/mL for 5–hydroxytryptamine and dopamine, and 0.01–1.0 μg/mL for tyramine and spermine. The limits of detection and the limits of quantification were 0.3–75.0 ng/mL and 1.0–250.0 ng/mL, respectively. Relative standard deviations were ≤5.14% for intra‐day and ≤6.58% for inter‐day precision. The recoveries of BAs ranged from 79.11 to 114.26% after spiking standard solutions of BAs into a sample at three levels. Seven kinds of BAs were found in rat plasma, and the mean values of tryptamine, 2‐phenethylamine, putrescine, cadaverine, histamine, spermidine and spermine determined were 52.72 ± 7.34, 11.45 ± 1.56, 162.56 ± 6.26, 312.75 ± 18.11, 1306.50 ± 116.16, 273.89 ± 26.41 and 41.51 ± 2.07 ng/mL, respectively.     

Molecularly imprinted polymeric stir bar: Preparation and application for the determination of naftopidil in plasma and urine samples

In this study, molecularly imprinting technology and stir bar absorption technology were combined to develop a microextraction approach based on a molecularly imprinted polymeric stir bar. The molecularly imprinted polymer stir bar has a high performance, is specific, economical, and simple to prepare. The obtained naftopidil‐imprinted polymer‐coated bars could simultaneously agitate and adsorb naftopidil in the sample solution. The ratio of template/monomer/cross‐linker and conditions of template removal were optimized to prepare a stir bar with highly efficient adsorption. Fourier transform infrared spectroscopy, scanning electron microscopy, selectivity, and extraction capacity experiments showed that the molecularly imprinted polymer stir bar was prepared successfully. To utilize the molecularly imprinted polymer stir bar for the determination of naftopidil in complex body fluid matrices, the extraction time, stirring speed, eluent, and elution time were optimized. The limits of detection of naftopidil in plasma and urine sample were 7.5 and 4.0 ng/mL, respectively, and the recoveries were in the range of 90–112%. The within‐run precision and between‐run precision were acceptable (relative standard deviation <7%). These data demonstrated that the molecularly imprinted polymeric stir bar based microextraction with high‐performance liquid chromatography was a convenient, rapid, efficient, and specific method for the precise determination of trace naftopidil in clinical analysis.     

Chromatographic method for clobetasol propionate determination in hair follicles and in different skin layers

Clobetasol propionate (CLO) is a potent steroid used for the treatment of several dermatological diseases. Recent studies suggest its additional use in alopecia topical treatment, generating a demand for novel formulations with specific delivery into hair follicles. Hence, a selective analytical method for drug quantification in follicular structures and skin layers is required. For this, a simple HPLC‐UV method was developed. Quantification was performed using a RP‐C₁₈ column (4.6 mm × 15 cm, 5 μm), with a mixture of methanol–acetonitrile–water (50:15:35 v /v) as mobile phase, a flow rate of 1.2 mL/min, oven temperature of 30°C, injection volume of 50 μL and detection at 240 nm. The optimized conditions enabled a 12 min running with CLO elution at 10.1 min and resolution of 2.424 from skin matrix interferences. Validation was performed in accordance with International Conference on Harmonization guidelines and fulfilled the criteria of selectivity, linearity (0.5–15.0 μg/mL), robustness, precision, accuracy and limits of detection and quantification (0.02 and 0.07 μg/mL, respectively). The validated method was successfully applied for CLO quantification following in vitro skin permeation experiments and differential tape‐stripping for hair follicle deposition determination, demonstrating its suitability.     

Sensitive determination of deuterated and non-deuterated tryptophan, tryptamine and serotonin by combined capillary gas chromatography and negative ion chemical ionization mass spectrometry

Sensitive methods for the determination of deuterated and non-deuterated tryptophan, tryptamine and serotonin by combined capillary gas chromatography and negative ion chemical ionization mass spectrometry were developed. [3,3-2H2]-L-Tryptophan, which was used as a tracer, was synthesized for studies of their in vivo metabolism. Tryptophan was converted into its trifluoroacetylmethyl derivative after prepurification with an AG 50W-X2 cation-exchange column. Tryptamine and serotonin were extracted with 20% butanol in diethyl ether and derivatized with trifluoroacetic anhydride. These derivatives were separated and determined by selected ion monitoring. In these determinations, [2',3,3,4',5',6',7'-2H7]-D,L-tryptophan, [alpha,alpha,beta,beta-2H4]tryptamine and [alpha,alpha,beta,beta-2H4]serotonin were used as internal standards.     

Efficient strategy for the selective determination of dopamine in human urine by molecularly imprinted solid‐phase extraction

An efficient molecularly imprinted solid‐phase extraction protocol was developed for the separation of dopamine (DA) from human urine. After successful validation of the analytical method using high‐performance liquid chromatography coupled with fluorescence detection, a new strategy for the selective determination of DA in the presence of norepinephrine and epinephrine in human urine was presented. In the proposed protocol, the LODs and quantification for DA were 166 ± 36 and 500 ± 110 nmol/L, respectively, and the total recoveries of DA in the range of 1–15 μmol/L varied between 98.3 and 101.1%. DA was detected in the real urine samples at the level of 47–167 μg/L (0.250–0.895 μmol/L). The superiority of the novel analytical strategy was shown by comparison with the results obtained for a commercially available imprinted sorbent.     

Electromembrane extraction of tartrazine from food samples: Effects of nano‐sorbents on membrane performance

In the present study, for the first time electromembrane extraction followed by high‐performance liquid chromatography coupled with ultraviolet detection was developed and validated for the determination of tartrazine in some food samples. The parameters influencing electromembrane extraction were evaluated and optimized. The membrane consists of 1‐octanol immobilized in the pores of a hollow fiber. As a driving force, a 30 V electrical field was applied to make the analyte migrate from sample solution with pH 3, through the supported liquid membrane into an acceptor solution with pH 10. Best preconcentration (enrichment factor >21) was obtained in extraction duration of 15 min. Effects of some solid nano‐sorbents like carbon nanotubes and molecularly imprinted polymers on membrane performance and electromembrane extraction efficiency were evaluated. The method provided the linearity in the range 25–1000 ng/mL for tartrazine (R² > 0.9996) with repeatability range (RSD) between 3.8 and 8.5% (n = 3). The limits of detection and quantitation were 7.5 and 25 ng/mL, respectively. Finally, the method was applied to the determination and quantification of tartrazine from some food samples with relative recoveries in the range between 90 and 98%.     

Molecularly imprinted polymer as a novel solid‐phase microextraction coating for the selective enrichment of trace imidazolinones in rice,peanut, and soil

The development and application of an imazethapyr molecularly imprinted polymer‐based solid‐phase microextraction coating were investigated. A novel molecularly imprinted polymer coating with imazethapyr as template was firstly prepared by a one‐step in situ polymerization method, and demonstrated specific selectivity to imidazolinone herbicides in complicated samples. The structural characteristics and extraction performance of the imazethapyr molecularly imprinted polymer coating were studied. The molecularly imprinted polymer coating was homogeneous, dense, and heat and solvent resistant. Adsorption capacity experiments showed that the molecularly imprinted polymer coating could selectively extract imazethapyr and its structural analogs, and the maximum adsorption capacity was 2.5 times as much as that of the nonimprinted polymer coating. A method for the determination of five imidazolinones by imazethapyr molecularly imprinted polymer solid‐phase microextraction coupled with high‐performance liquid chromatography was developed. The linear range was 0.50–50 μg/L for imazameth, imazamox, imazapyr acid, and imazethapyr, and 1.0–100 μg/L for imazaquin acid, and the detection limits were within the range of 0.070–0.29 μg/L. The method was applied to simultaneous and multiresidual determinations of trace imidazolinones in rice, peanut, and soil samples with satisfactory recoveries of 60.6–99.5, 79.1–123, and 61.3–116%, respectively, and relative standard deviations of 0.40–10%, which indicated that this method was suitable for the trace analysis of imidazolinones in complex food and environmental samples.     

High performance liquid chromatographic analysis of time-dependent changes in urinary excretion of indoleamines following tryptophan administration

Analytical conditions of prepurification extraction and HPLC separation were optimized for determination of urinary serotonin and tryptamine. Under optimal conditions, serotonin, tryptamine and an internal standard were extracted with 15% v/v n-propanol in diethyl ether from urine samples alkalized with a phosphate buffer (0.75 mol/L, pH 10.0), and then they were re-extracted into an HCl solution (0.1 mol/L). Purified indoleamines were simultaneously separated by reversed-phase ion-pair HPLC with native fluorescence detection. Urinary serotonin and tryptamine were selectively determined within about 45 min per sample for the whole procedure. Analytical recovery, reproducibility and detection sensitivity were satisfactory for pursuing time-dependent changes in indoleamine levels. Urinary excretion profiles of serotonin and tryptamine in subjects dosed with L-tryptophan were successfully analyzed by our method.     

Supported liquid membrane-modified piezoelectric flow sensor with molecularly imprinted polymer for the determination of vanillin in food samples

An on-line supported liquid membrane-piezoelectric detection system, based on a molecularly imprinted polymer (SLM-QCM-MIP) manifold, has been developed and applied to the quantitative determination of vanillin in food samples. The analyte is extracted from a donor phase into the hydrophobic membrane, and then back extracted into a second aqueous phase used as the acceptor solution. The quantification of vanillin was performed using a quartz crystal microbalance modified with a molecularly imprinted polymer (MIP). The method shows a linear range between 5 and 65 μM, with a relative standard deviation of ±4.8% (at 5 μM). The method was validated by analysing food samples and comparing the results with an SLM based on spectrophotometric quantification.     

Development of a molecularly imprinted polymer for selective extraction followed by liquid chromatographic determination of sitagliptin in rat plasma and urine

A novel water-compatible molecularly imprinted solid-phase extraction (MISPE) combined with zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) method for selective extraction and determination of sitagliptin in rat serum and urine was developed and validated. The effects of progenic solvents, pH, cross linker and amount of monomer were studied to optimize the efficiency and selectivity. The adsorption kinetics and isotherms were measured. The molecularly imprinted polymer (MIP) showed good specific adsorption capacity with an optimum of 180 mg/g at pH 7.5 and selective extraction of sitagliptin from rat plasma and urine. The recovery of sitagliptin from rat urine and plasma was >98%. The limits of detection (LOD) and quantification (LOQ) were 0.03 and 0.10 μg/L respectively. The proposed method overcomes the matrix effects of phospholipids generally encountered while preparation of plasma samples by precipitation of proteins.     

High‐performance liquid chromatography with diode array detection method for the simultaneous determination of seven selected phosphodiesterase‐5 inhibitors and serotonin reuptake inhibitors used as male sexual enhancers

This work presents a simple, sensitive and generic high‐performance liquid chromatography with diode array detection method for the simultaneous determination of seven drugs prescribed for the treatment of erectile dysfunction and premature ejaculation. Investigated drugs include the phosphodiesterase‐5 inhibitors: sildenafil, tadalafil, and vardenafil, in addition to the selective serotonin reuptake inhibitors: dapoxetine, duloxetine, fluoxetine, and paroxetine. The drugs were separated using a Waters C8 column (4.6 × 250 mm, 5 μm) with the mobile phase consisting of phosphate buffer pH 3, acetonitrile and methanol in the ratio 60:33:7. The flow rate was 1.2 mL/min, and quantification was based on measuring peak areas at 225 nm. Peaks were perfectly resolved with retention times 3.3, 3.9, 6.4, 7.5, 9.5, 10.7, and 13.4 min for vardenafil, sildenafil, paroxetine, duloxetine, dapoxetine, fluoxetine, and tadalafil, respectively. The developed method was validated with respect to system suitability, linearity, ranges, accuracy, precision, robustness, and limits of detection and quantification. The proposed method showed good linearity in the ranges 5–500, 2–200, 2–200, 3–300, 1.5–150, 2–200, and 2–200 μg/mL for sildenafil, tadalafil, vardenafil, dapoxetine, duloxetine fluoxetine, and paroxetine, respectively. The limits of detection were 0.18–0.38 μg/mL for the analyzed compounds. The applicability of the proposed method to real life situations was assessed through the analysis of commercial tablets, and satisfactory results were obtained.     

Quantitative profiling of tryptophan metabolites in serum, urine, and cell culture supernatants by liquid chromatography-tandem mass spectrometry

A sensitive, selective, and comprehensive method for the quantitative determination of tryptophan and 18 of its key metabolites in serum, urine, and cell culture supernatants was developed. The analytes were separated on a C18 silica column by reversed-phase liquid chromatography and detected by electrospray ionization tandem mass spectrometry in positive ion multiple reaction monitoring (MRM) mode, except for indoxyl sulfate which was measured in negative ion MRM mode in a separate run. The limits of detection and lower limits of quantification were in the range of 0.1–50 and 0.5–100 nM, respectively. Fully ¹³C isotope-labeled and deuterated internal standards were used to achieve accurate quantification. The applicability of the method to analyze serum, urine, and cell culture supernatants was demonstrated by recovery experiments and the evaluation of matrix effects. Precision for the analysis of serum, urine, and cell culture supernatants ranged between 1.3% and 16.0%, 1.5% and 13.5%, and 1.0% and 17.4%, respectively. The method was applied to analyze changes in tryptophan metabolism in cell culture supernatants from IFN-γ-treated monocytes and immature or mature dendritic cells.     

Multi‐residue analysis of 44 pharmaceutical compounds in environmental water samples by solid‐phase extraction coupled to liquid chromatography‐tandem mass spectrometry

A solid‐phase extraction combined with a liquid chromatography‐tandem mass spectrometry analysis has been developed and validated for the simultaneous determination of 44 pharmaceuticals belonging to different therapeutic classes (i.e., antibiotics, anti‐inflammatories, cardiovascular agents, hormones, neuroleptics, and anxiolytics) in water samples. The sample preparation was optimized by studying target compounds retrieval after the following processes: i) water filtration, ii) solid phase extraction using Waters Oasis HLB cartridges at various pH, and iii) several evaporation techniques. The method was then validated by the analysis of spiked estuarine waters and wastewaters before and after treatment. Analytical performances were evaluated in terms of linearity, accuracy, precision, detection, and quantification limits. Recoveries of the pharmaceuticals were acceptable, instrumental detection limits varied between 0.001 and 25 pg injected and method quantification limits ranged from 0.01 to 30.3 ng/L. The precision of the method, calculated as relative standard deviation, ranged from 0.3 to 49.4%. This procedure has been successfully applied to the determination of the target analytes in estuarine waters and wastewaters. Eight of these 44 pharmaceuticals were detected in estuarine water, while 26 of them were detected in wastewater effluent. As expected, the highest values of occurrence and concentration were found in wastewater influent.     

On‐line determination of sarcosine in biological fluids utilizing dummy molecularly imprinted polymers in microextraction by packed sorbent

Several years ago, sarcosine received attention as a prostate‐cancer marker. Prostate cancer is one of the most widespread types of tumor diseases in men. The prostate‐specific antigen is normally used as a marker, and it can only be detected in blood with a sensitivity of approximately 80%. In the present study, dummy molecularly imprinted polymers in microextraction by packed sorbent with on‐line liquid chromatography coupled to tandem mass spectrometry was used for the determination of sarcosine in human plasma and urine samples. The polymer network glycine was used for the dummy molecularly imprinted polymers. The selectivity of the method was evaluated using similar prostate‐cancer biomarkers. In addition, various parameters affecting the extraction performance were investigated. The method limits of detection and quantification in the plasma and urine were 1.0 and 3.0 ng/mL, respectively. The values of the coefficient of determination were over 0.99 for all runs in the studied concentration range (3.0–10 000 ng/mL). The method recovery was 87 and 89% in plasma and urine, respectively. The intraday and interday precisions of sarcosine in the plasma and urine samples were in the ranges of 4.0–7.1, 3.0–6.3, 2.9–4.7, and 5.0–6.7, respectively.