Synthesis and Characterization of β‐CD‐Coated Polystyrene Microspheres by γ‐Ray Radiation Emulsion Polymerization

Polystyrene (PS) microspheres coated with β‐cyclodextrin (β‐CD) were fabricated via γ‐ray‐induced emulsion polymerization in a ternary system of styrene/β‐CD/water (St/β‐CD/water). The solid inclusion complex of St and β‐CD particles formed at the St droplets–water interface can stabilize the emulsion as the surfactant. TEM and XPS results showed that β‐CD remains on the surface of PS particles. The average size of the PS particles increases from 186 to 294 nm as the weight ratio of β‐CD to St rises from 5% to 12.5%. The water contact angle (CA) of PS latex film is lower than 90°, and reduces with the β‐CD content even to 36°. Thus, this work provides a new and one‐pot strategy to surface hydrophilic modification on hydrophobic polymer particles with cyclodextrins through radiation emulsion polymerization.     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

Poly(4‐acryloylmorpholine) oligomers carrying a β‐cyclodextrin residue at one terminus

A straightforward synthesis of amphiphilic β‐cyclodextrin‐poly(4‐acryloylmorpholine) (β‐CD‐PACM) polymers of controlled molecular weight, consisting of the radical polymerization of 4‐acryloylmorpholine in the presence of 6‐deoxy‐6‐mercapto‐β‐cyclodextrin (β‐CD‐SH) as chain‐transfer agent, has been established. These derivatives carry a single β‐cyclodextrin (β‐CD) moiety at one terminus and their average molecular weight is in the order of 10⁴. Thus, their β‐CD content is ～ 10% by weight. No evidence of un‐functionalized PACM was found in the final products. The chain‐transfer constant (C_T) of β‐CD‐SH was found to be 1.30 by independently determining the reaction constants of both chain‐transfer and propagation reactions. This ensures that the molecular weight, hence the β‐CD content of the polymers, does not significantly vary with conversion. These β‐CD‐PACM polymers are highly soluble in water as well as in several organic solvents such as chloroform and lower alcohols. They proved capable of solubilizing in water poorly soluble drugs such as 9‐[(2‐hydroxyethoxy)methyl]guanine (Acyclovir) and of gradually releasing them in aqueous systems. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1607–1617, 2008     

Preparation of a polyhedral oligomeric silsesquioxanes hybrid monolith via a single‐step ring‐opening polymerization for pressurized capillary electrochromatography

An organic‐silica hybrid monolith was prepared by a single‐step ring‐opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS‐epoxy), polyethylenimine (PEI), and β‐cyclodextrin (β‐CD) in a ternary porogenic solvent consisting of polyethylene glycol, 1,4‐butanediol, and 1‐propanol. The framework of POSS‐PEI hybrid monolith could offer well‐defined 3D skeleton, while β‐CD with the ability of forming a host‐guest inclusion complexes with a variety of compounds could show an ability of specific selection. The obtained hybrid monoliths were successfully applied for separation of phenols, benzoic acids, and nucleobases. Especially due to the introduction of β‐CD, positional isomers including hydroquinone and resorcinol, o‐nitrophenol and p‐nitrophenol, as well as p‐chlorophenol and o‐chlorophenol were baseline separated and the column efficiency reached 82 300 plates/m for hydroquinone.     

Polyrotaxanes based on polyethers and β‐cyclodextrin

A polyrotaxane in which β‐cyclodextrins (β‐CDs) are threaded onto a polyether chain was prepared by polycondensation of a β‐CD/bisphenol A (BPA) inclusion complex with aromatic dihalides. Two dihalides, with and without a side chain, were used. This polycondensation results in a polyrotaxane (or pseudopolyrotaxane for polymers without stoppers) with a 1:1 threading ratio when the side chain is present and 2:3 when there is none. The long side chain prevents dethreading of the macrocycles. The best yield and a good threading ratio were obtained when the polycondensation was performed by liquid?solid phase transfer catalysis without solvent (L/S PTC) using 2,5‐bi(iodomethyl)‐4‐methoxy‐(1‐octyloxy)benzene as dihalide. The ¹H NMR and FTIR spectra show that the products consist of β‐CD and polyether. The 2D NOESY NMR spectrum shows that the polyether chains are included in the β‐CD cavity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4391–4399, 2009     

Engineering a β‐Helical d,l‐Peptide for Folding in Polar Media

β Helices—helices formed by alternating d,l ‐peptides and stabilized by β‐sheet hydrogen bonding—are found naturally in only a handful of highly hydrophobic peptides. This paper explores the scope of β‐helical structure by presenting the first design and biophysical characterization of a hydrophilic d,l ‐peptide, 1 , that forms a β helix in methanol. The design of 1 is based on the β‐hairpin/β helix—a new supersecondary that had been characterized previously only for hydrophobic peptides in nonpolar solvents. Incorporating polar residues in 1 provided solubility in methanol, in which the peptide adopts the expected β‐hairpin/β‐helical structure, as evidenced by CD, analytical ultracentrifugation (AUC), NMR spectroscopy, and NMR‐based structure calculations. Upon titration with water (at constant peptide concentration), the structure in methanol ( 1 m ) transitions cooperatively to an extended conformation ( 1 w ) resembling a cyclic β‐hairpin; observation of an isodichroic point in the solvent‐dependent CD spectra indicates that this transition is a two‐state process. In contrast, neither 1 m nor 1 w show cooperative thermal melting; instead, their structures appear intact at temperatures as high as 65 °C; this observation suggests that steric constraint is dominant in stabilizing these structures. Finally, the ¹H NMR CαH spectroscopic resonances of 1 m are downfield‐shifted with respect to random‐coil values, a hitherto unreported property for β helices that appears to be a general feature of these structures. These results show for the first time that an appropriately designed β‐helical peptide can fold stably in a polar solvent; furthermore, the structural and spectroscopic data reported should prove useful in the future design and characterization of water‐soluble β helices.     

A Molecular Necklace: Threading β‐Cyclodextrins onto Polymers Derived from Bile Acids

A molecular necklace of polypseudorotaxanes was prepared by threading β‐cyclodextrins (β‐CD) onto biodegradable and thermoresponsive polyurethanes derived from bile acids. These polyurethanes were synthesized via a simple step condensation of bile acid‐based dicarbonate with poly(ethylene glycol)‐diamine. The β‐CD rings slide onto the poly(ethylene glycol) segments and selectively recognize the bile acid units of the polyurethane chains, whereas the poly(ethylene glycol) segments remain crystalline with a lower crystallinity. This bio‐compound‐derived molecular necklace can be visualized by scanning tunneling microscopy. The polypseudorotaxanes show thermosensitivity in water and the phase transition temperature may be fine‐tuned by varying the molar ratios of β‐CD to the bile acid units. Such an interesting necklace model of polypseudorotaxane constructed from natural compounds may lead to the further exploration of their applications, such as as an enzyme model, due to their biological nature.     

Polymerization of β‐cyclodextrin in the presence of bentonite clay to produce polymer nanocomposites for removal of heavy metals from drinking water

New hybrid organic–inorganic nanocomposites consist of β‐cyclodextrin (β‐CD)/epichlorohydrin (ECH), and bentonite clay were prepared by direct intercalation through one step emulsion polymerization. The structure and thermal stability of prepared nanocomposites were investigated by Fourier‐transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM), energy dispersive X‐ray analysis (EDAX), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), differential of differential scanning calorimetry (DDSC), thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analyses. The observed results show that the β‐CD polymer/clay nanocomposites (β‐CD–ECH polymer/clay) with higher thermal stability than β‐CD–ECH polymer were successfully prepared. The removal of heavy metals such as Cu(II), Zn(II) and Co(II) ions from drinking water was studied using a batch method at ambient temperature. The removal percentage and distribution coefficients (Kd) were determined for the adsorption system. It was found that the β‐CD–ECH polymer/clay nanocomposites showed higher removal capacity for Co²⁺, Cu²⁺ and Zn²⁺ ions in comparison with β‐CD–ECH polymer. The selectivity order could be given as Zn²⁺ > Cu²⁺ > Co²⁺. Copyright © 2016 John Wiley & Sons, Ltd.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Catalytic Au Electrodes Based on SAMs of per(6‐deoxy‐6‐thio‐2,3‐di‐O‐methyl)‐β‐cyclodextrin

A three‐step sequential self‐assembly procedure was applied in preparing gold electrodes modified in a stable and controlled way by a monolayer of thiolated β‐cyclodextrin (β‐CD), with methylene blue (MB) included in its cavity as the active component of the monolayer, and octanethiol as the nonelectroactive spacer blocking the electrode surface not occupied by β‐CD. MB acted as a mediator of electrons with respect to a solution soluble analyte, H₂O₂, and provided electrical contact between the electrode and solution resident enzyme, laccase, catalyzing reduction of oxygen to water.     

Fluorescence Dynamics of Monocyclodextrin– and Bis(thiol‐cyclodextrin)–Coumarin C153 Complexes

The solvation and confinement of coumarin C153 within supramolecular host/guest complexes based on β‐cyclodextrin (β‐CD) and 6‐deoxy‐6‐thio‐β‐cyclodextrin (β‐CD‐SH) in water are studied by fluorescence spectroscopy. For β‐CD/C153, the 1:1 complex is proposed, and for β‐CD‐SH/C153 both the 1:1 and 2:1 complexes are believed to be formed. The 2:1 β‐CD‐SH/C153 complex has an association constant of 4.2×10⁵ M ^?1 and a C153 population of 82 %, which are interestingly high values, indicating that the proposed β‐CD‐SH dimers structure are connected by covalent disulfide bonds; this is supported by mass spectrometry. Solvation related to fast hydrogen‐bond rearrangement as a part of fluorescence relaxation is determined by the ultrafast components of time‐resolved spectroscopy to be 3 and 7 ps for the 1:1 β‐CD/C153 and 2:1 β‐CD‐SH/C153 complexes, respectively.     

β‐Cyclodextrin‐Platinum Nanoparticles/Graphene Nanohybrids: Enhanced Sensitivity for Electrochemical Detection of Naphthol Isomers

Naphthol isomers, including α‐naphthol (α‐NAP) and β‐naphthol (β‐NAP), are used widely in various fields and are harmful to the environment and human health. The qualitative and quantitative determination of naphthol isomers is therefore of great significance. Herein, β‐cyclodextrin (β‐CD)‐platinum nanoparticles (Pt NPs)/graphene nanosheets (GNs) nanohybrids (β‐CD‐PtNPs/GNs) were prepared for the first time using a simple wet chemical method and characterized by atomic force microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and electrochemical methods, and then applied successfully in the ultrasensitive electrochemical detection of naphthol isomers. The results show that the oxidation peak currents of naphthol isomers obtained at the glassy carbon (GC) electrode modified with β‐CD‐PtNPs/GNs are much higher than those at the β‐CD/GNs/GC, PtNPs/GNs/GC, GNs/GC, and bare GC electrodes. Additionally, compared with other electrochemical sensors developed previously, the proposed electrode results in improved detection limits of about one order of magnitude for α‐NAP (0.23 nM ) and three orders of magnitude for β ‐NAP (0.37 nM ).     

Enantioselective Nucleophilic β‐Carbon‐Atom Amination of Enals: Carbene‐Catalyzed Formal [3+2] Reactions

An enantioselective β‐carbon amination for enals is disclosed. The nitrogen atom from a protected hydrazine with suitable electronic properties readily behaves as a nucleophile. Addition of the nitrogen nucleophile to a catalytically generated N‐heterocyclic‐carbene‐bound α,β‐unsaturated acyl azolium intermediate constructs a new carbon–nitrogen bond asymmetrically. The pyrazolidinone products from our catalytic reactions are common scaffolds in bioactive molecules, and can be easily transformed into useful compounds such as β³‐amino‐acid derivatives.     

Interaction of β‐Cyclodextrin with Cetyltrimethylammonium Bromide in the Presence of Neutral Red and Its Application to the Spectrophotometric Determination of β‐Cyclodextrin

The effects of addition of β‐cyclodextrin (β‐CD) to the neutral red‐cetyltrimethylammonium bromide (CTAB) associates in pH 7 phosphate buffer solutions were investigated. Addition of β‐CD to neutral red‐CTAB association causes decomposition of the associate by displacement of neutral red with β‐CD. The inclusion complex of CTAB with β‐CD is more stable than that with neutral red. The results indicate that formation of inclusion complex of CTAB with β‐CD prevents its association with neutral red, and inclusion complex formation of β‐CD and neutral red in the presence of CTAB takes place after total consumption of CTAB. The competition of β‐CD and neutral red on the interaction with CTAB can be used for the simple, rapid and sensitive spectrophotometric determination of β‐CD.     

Direct Conjugate Addition of Alkynes with α,β‐Unsaturated Carbonyl Compounds Catalyzed by NCN‐Pincer Ru Complexes

NCN‐pincer Ru‐complexes containing bis(oxazolinyl)phenyl ligands serve as suitable catalysts in the direct conjugate additions of α,β‐unsaturated carbonyl compounds, including ketones, esters, and amides, as well as vinylphosphonates, giving various β‐alkynyl carbonyl and phosphonate compounds. A bis(oxazolinyl)phenyl (phebox)–Ru complex also catalyzes the asymmetric conjugate addition of an alkyne with a β‐substituted, α,β‐unsaturated ketone to produce a chiral β‐alkynyl ketone.     

The synthesis and transformations of 2‐[2‐ethoxycarbonyl‐2‐(2‐pyridinyl)ethenyl]amino‐3‐dimethylaminopropenoates. the synthesis of substituted β‐amino‐α,β‐didehydro‐a‐amino acid derivatives

Alkyl (Z)‐2‐[(E)‐2‐ethoxycarbonyl‐2‐(2‐pyridinyl)ethenyl]amino‐3‐dimethylaminopropenoates 7 and 8 were prepared from ethyl 2‐pyridinylacetate (1) in two steps. Substitution of the dimethylamino group with alkyl‐, aryl‐, or heteroarylamines afforded the corresponding β‐alkyl‐ 22–24 , β‐aryl‐ 25–35 , and β‐herteroaryl‐amino‐α,β‐didehydro‐α‐amino acid 36 and 37 derivatives, intermediates for further preparation of various heterocyclic systems. The orientation around both double bonds were determined by various nmr techniques.     

The structure–activity relationship of some hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones

The study was focused on the structure–activity relationship of some newly synthesized hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones. These complexes were screened for their antibacterial activity against a Gram‐negative bacterium (Pseudomonas aeruginosa) and Gram‐positive bacteria (Streptomyces griseus, Staphylococcus aureus, Bacillus subtilis) and the results were compared with those of a standard antibacterial drug. Some of the complexes were also screened for their antifungal activity against various fungi (Aspergillus niger, A. flavus, Trichoderma viride, Fusarium oxysporum) and were found to be active. These new hexacoordinated complexes of dimethyltin(IV) were generated by reactions of dimethyltin(IV) dichloride and sodium salts of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones in 1:1:1 molar ratio in refluxing dry benzene. Plausible structures of these complexes were suggested with the aid of physicochemical and spectroscopic studies. ¹¹⁹Sn NMR spectral data revealed the presence of a hexacoordinated tin centre in these dimethyltin(IV) complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel sorbent for chromatographic separations: A silica matrix modified with non‐covalently bonded tetrakis(β‐cyclodextrin)–porphyrin conjugates

We prepared new phases for LC that consisted of silica modified with non‐covalently bonded tetrakis(β‐cyclodextrin)–porphyrin (where cyclodextrin is CD) conjugates. The effects of the porphyrin core, type of spacer and β‐CD moieties on the behaviours of the modified phases for the separation of aromatic compounds (benzene, toluene, ethylbenzene, propylbenzene, butylbenzene, pentylbenzene, o‐terphenyl, triphenylene, phenol and caffeine) and fluorinated aromatic compounds (pentafluorobenzonitrile, pentafluoronitrobenzene and hexafluorobenzene) were studied using the Tanaka test. The results indicate that the non‐covalent substitution of silica with CD‐based macromolecules that have a porphyrin core can be a very effective method for preparing novel sorbents with specific chromatographic properties for applications in LC.     

An Electrochemical Sensing Strategy for Amantadine Detection Based on Competitive Host‐guest Interaction of Methylene Blue/β‐cyclodextrin/Poly(N‐acetylaniline) Modified Electrode

A novel electrochemical strategy for the detection of amantadine (AMD) has been developed based on the competitive host‐guest interaction of AMD and methylene blue (MB) with β‐cyclodextrin (β‐CD). Due to the host‐guest interaction, MB molecules can enter into the hydrophobic inner cavity of β‐CD, and the MB/β‐CD/poly(N‐acetylaniline)/glassy carbon electrode displays a remarkable reduction peak due to MB. In the presence of AMD, competitive association to β‐CD occurs and the MB molecules are displaced by AMD, resulting in a decrease of reduction peak current of MB. The difference value of the cathodic peak current showed a linear relationship with the AMD concentration.     

Versatile Iridicycle Catalysts for Highly Efficient and Chemoselective Transfer Hydrogenation of Carbonyl Compounds in Water

Cyclometalated iridium complexes are shown to be highly efficient and chemoselective catalysts for the transfer hydrogenation of a wide range of carbonyl groups with formic acid in water. Examples include α‐substituted ketones (α‐ether, α‐halo, α‐hydroxy, α‐amino, α‐nitrile or α‐ester), α‐keto esters, β‐keto esters and α,β‐unsaturated aldehydes. The reduction was carried out at substrate/catalyst ratios of up to 50 000 at pH 4.5 and required no organic solvent. The protocol provides a practical, easy and efficient way for the synthesis of β‐functionalised secondary alcohols, such as β‐hydroxyethers, β‐hydroxyamines and β‐hydroxyhalo compounds, which are valuable intermediates in pharmaceutical, fine chemical, perfume and agrochemical synthesis.