Dual Amplified Electrochemical Immunosensor for Hepatitis B Virus Surface Antigen Detection Using Hemin/G‐Quadruplex Immobilized onto Fe3O4‐AuNPs or (Hemin‐Amino‐rGO‐Au) Nanohybrid

A sensitive electrochemical immunosensor for Hepatitis B virus surface antigen (HBsAg) detection was fabricated based on hemin/G‐quadruplex interlaced onto Fe₃O₄‐AuNPs or hemin ‐amino‐reduced graphene oxide nanocomposite (H‐amino‐rGO‐Au). G‐quadruplex DNAzyme, which is composed of hemin and guanine‐rich nucleic acid, is an effective signal amplified tool for its outstanding peroxidase activity and Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites with quasi‐enzyme activity provide appropriate support for the immobilization of hemin/G‐quadruplex. The target protein was sandwiched between the primary antibody immobilized on the GO and secondary antibody immobilized on the Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites and glutaraldehyde was used as linking agent for the immobilization of primary antibody on the surface of GO. Both Fe₃O₄‐AuNPs and H‐amino‐rGO‐Au nanocomposite and also hemin/G‐quadruplex can cooperate the electrocatalytic reduction of H₂O₂ in the presence of methylene blue as mediator. The proposed immunosensor has a wide linear dynamic range of 0.1 pg/ml to 300 pg/ml with a detection limit of 60 fg/ml when Fe₃O₄‐AuNPs was used for immobilization of hemin/G‐quadruplex, while the dynamic range and DL were 0. 1–1000 pg/mL and 10 fg/mL, respectively in the presence of H‐amino‐rGO‐ Au nanocomposite as platform for immobilizing of hemin/G‐quadruplex. The proposed immunosensor was also used for analysis of HBsAg in spiked human serum samples with satisfactory results.     

A Sensitive Electrochemical Sensor Based on Graphene Oxide Nanosheets Decorated by Fe3O4@Au Nanostructure Stabilized on Polypyrrole for Efficient Triclosan Sensing

Triclosan is broadly utilized as preservative or antiseptic in various cosmetic and personal care products. It becomes hazardous for environmental safety and human health more than a certain concentration. In this research, graphene oxide (GO) nanosheets were prepared by composing Fe₃O₄@Au nanostructure decorated GO together with polypyrrole (PPy) (Fe₃O₄@Au‐PPy/GO nanocomposite) in a facile way. The composite excellent increased the electrochemical response, presenting a high sensitive electrochemical method for triclosan detection. The synthesized Fe₃O₄@Au‐PPy/GO nanocomposite was characterized for its morphological, magnetically and structural properties by FESEM‐mapping, TEM, and XRD. The Fe₃O₄@Au‐PPy/GO nanocomposites modified glassy carbon electrodes (GCE), Fe₃O₄@Au‐PPy/GO GCE, showed a higher sensitivity good stability, reproducibility, lower LOD (2.5×10^?9 M) and potential practical application in electrochemical detection of triclosan under optimized experimental conditions.     

Highly Sensitive Electrochemical Hydrogen Peroxide Sensor Based on Iron Oxide‐Reduced Graphene Oxide‐Chitosan Modified with DNA‐Celestine Blue

The present study describes a novel and very sensitive electrochemical assay for determination of hydrogen peroxide (H₂O₂) based on synergistic effects of reduced graphene oxide‐ magnetic iron oxide nanocomposite (rGO‐Fe₃O₄) and celestine blue (CB) for electrochemical reduction of H₂O₂. rGO‐Fe₃O₄ nanocomposite was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X‐ray diffraction (XRD), electrochemical impedance spectroscopy and cyclic voltammetry. Chitosan (Chit) was used for immobilization of amino‐terminated single‐stranded DNA (ss‐DNA) molecules via a glutaraldehyde (GA) to the surface of rGO‐Fe₃O₄. The MTT (3‐(4,5‐Dim ethylt hiazol‐2‐yl)‐2,5‐diphenylt etrazolium bromide) results confirmed the biocompatibility of nanocomposite. Experimental parameters affecting the ss‐DNA molecules immobilization were optimized. Finally, by accumulation of the CB on the surface of the rGO‐Fe₃O₄‐Chit/ssDNA, very sensitive amperometric H₂O₂ sensor was fabricated. The electrocatalytic activity of the rGO‐Fe₃O₄‐Chit/DNA‐CB electrode toward H₂O₂ reduction was found to be very efficient, yielding very low detection limit (DL) of 42 nM and a sensitivity of 8.51 μA/μM. Result shows that complex matrices of the human serum samples did not interfere with the fabricated sensor. The developed sensor provided significant advantages in terms of low detection limit, high stability and good reproducibility for detection of H₂O₂ in comparison with recently reported electrochemical H₂O₂ sensors.     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

Exchange‐Coupled fct‐FePd/α‐Fe Nanocomposite Magnets Converted from Pd/Fe3O4 Core/Shell Nanoparticles

We report the controlled synthesis of exchange‐coupled face‐centered tetragonal (fct) FePd/α‐Fe nanocomposite magnets with variable Fe concentration. The composite was converted from Pd/Fe₃O₄ core/shell nanoparticles through a high‐temperature annealing process in a reducing atmosphere. The shell thickness of core/shell Pd/Fe₃O₄ nanoparticles could be readily tuned, and subsequently the concentration of Fe in nanocomposite magnets was controlled. Upon annealing reduction, the hard magnetic fct‐FePd phase was formed by the interdiffusion between reduced α‐Fe and face‐centered cubic (fcc) Pd, whereas the excessive α‐Fe remained around the fct‐FePd grains, realizing exchange coupling between the soft magnetic α‐Fe and hard magnetic fct‐FePd phases. Magnetic measurements showed variation in the magnetic properties of the nanocomposite magnets with different compositions, indicating distinct exchange coupling at the interfaces. The coercivity of the exchange‐coupled nanocomposites could be tuned from 0.7 to 2.8 kOe and the saturation magnetization could be controlled from 93 to 160 emu g^?1. This work provides a bottom‐up approach using exchange‐coupled nanocomposites for engineering advanced permanent magnets with controllable magnetic properties.     

Research on WPU‐RGO/ATP‐Fe3O4/chitosan composites with excellent electrical and magnetic properties

First, attapulgite‐Fe₃O₄ magnetic filler (ATP‐Fe₃O₄) was prepared by using a chemical precipitation method. Subsequently, graphite oxide (GO) was prepared through Hummer method, and then reduced GO (RGO) was prepared through GO reduced by chitosan (CS). Finally, a series of WPU‐RGO/ATP‐Fe₃O₄/CS composites were prepared by introduced RGO/ATP‐Fe₃O₄/CS to waterborne polyurethane. The structure and properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometry (VSM), thermogravimetric analysis TGA, conductivity test, and tensile test. The experimental results indicated that thermal stability and tensile strength of nanocomposites were improved with the increase of the content of RGO/ATP‐Fe₃O₄/CS. Meanwhile, with the increase of the RGO/ATP‐Fe₃O₄/CS content, the electrical and magnetic properties of WPU‐RGO/ATP‐Fe₃O₄/CS composites were improved. When the content of RGO/ATP‐Fe₃O₄/CS was 8 wt%, the electrical conductivity and the saturation magnetic strength of WPU‐RGO/ATP‐Fe₃O₄/CS composites were 3.1 × 10^?7 S·cm^?1 and 1.38 emu/g, respectively. WPU‐RGO/ATP‐Fe₃O₄/CS composites have excellent electrical and magnetic properties.     

Indicator-free electrochemical genosensing originated from the self-signal of poly-xanthurenic acid enhanced by Fe3O4/reduced graphene oxide

In this paper, an indicator-free electrochemical genosensing platform based on the self-signal changes of poly-xanthurenic acid (PXa) enhanced by Fe₃O₄/reduced graphene oxide (Fe₃O₄/RGO) was constructed. The resulting nanocomposite (PXa-Fe₃O₄/RGO) was characterized by transmission electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). The π–π* stacking and hydrogen bonding between the conjugated Fe₃O₄/GO and aromatic ring of xanthurenic acid monomer promoted the electropolymerization efficiency accompanied with an increased electrochemical response of PXa. The immobilization of the specific probe DNA was successfully realized via the noncovalent method due to the π–π* interaction between the conjugated nanostructure of PXa-Fe₃O₄/RGO and DNA bases. The hybridization between the probe DNA and target DNA induced the resulted double-stranded (ds)DNA to be released from the conjugated nanocomposite, accompanied with the self-signal regeneration of nanocomposite (“signal-on”). The self-signal changes could serve as a powerful tool for indicator-free and freely switchable detection of different target genes, and the synergistic effect of the integrated graphene-based nanocomposite effectively improved the sensitivity for the target DNA detection via EIS.     

Fe3O4/MIL‐101(Fe) nanocomposite as an efficient and recyclable catalyst for Strecker reaction

A highly porous metal‐organic framework, MIL‐101(Fe), was prepared by a solvothermal method in the presence of amino‐modified Fe₃O₄@SiO₂ nanoparticles, in order to achieve Fe₃O₄/MIL‐101(Fe) nanocomposite, which was characterized by XRD, FT‐IR, SEM, TEM, BET, and VSM. This hybrid magnetic nanocomposite was employed as heterogeneous catalyst for α‐amino nitriles synthesis through three‐component condensation reaction of aldehydes (ketones), amines, and trimethylsilyl cyanide in EtOH, at room temperature. The recoverability and reusability was admitted for the heterogeneous magnetic catalyst; no significant reduction of catalytic activity was observed even after five consecutive reaction cycles.     

Determination of sulfadimethoxine in milk with aptamer‐functionalized Fe3O4/graphene oxide as magnetic solid‐phase extraction adsorbent prior to HPLC

An aptamer (Apt) functionalized magnetic material was prepared by covalently link Apt to Fe₃O₄/graphene oxide (Fe₃O₄/GO) composite by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride and N‐hydroxysuccinimide, and then characterized by FTIR spectroscopy, X‐ray diffraction, and vibration sample magnetometry. The obtained composite of Fe₃O₄/GO/Apt was employed as magnetic solid‐phase extraction adsorbent for the selective preconcentration of sulfadimethoxine prior to analysis by high‐performance liquid chromatography. Under the optimal conditions (sample pH of 4.0, sorbent dosage of 20 mg, extraction time of 3 h, and methanol‐5% acetic acid solution as eluent), a good linear relationship was obtained between the peak area and concentration of sulfadimethoxine in the range of 5.0 to 1500.0 µg/L with correlation coefficient of 0.9997. The limit of detection (S/N = 3) was 3.3 µg/L. The developed method was successfully applied to the analysis of sulfadimethoxine in milk with recoveries in the range of 75.9‐92.3% and relative standard deviations less than 8.1%. The adsorption mechanism of Fe₃O₄/GO/Apt toward sulfadimethoxine was studied through the adsorption kinetics and adsorption isotherms, and the results show that the adsorption process fits well with the pseudo‐second‐order kinetic model and the adsorbate on Fe₃O₄/GO/Apt is multilayer and heterogeneous.     

Amorphizing of Ag Nanoparticles under Bioinspired One‐step Assembly of Fe3O4‐Ag/rGO Hybrids via Self‐redox Process with Enhanced Activity

Efficient and reusable nanocatalysts fabricated via a facile assembly are highly desirable for the cost‐effective hydrogenation reduction. Inspired by a fishing process with a fishnet, multifunctional nanostructured catalysts are rationally designed to combine interesting features via the self‐redox assembly of Fe₃O₄‐Ag composites on reduced graphene oxide (rGO) (Fe₃O₄‐Ag/rGO). In detail, Fe₃O₄ nanoparticles (NPs) endow the ternary hybrids with superparamagnetism (21.42 emu g^?1), facilitating catalysts to be separated from the reaction system. rGO could provide electron transfer pathways, enhancing catalytic activity. More interestingly, GO and Ag⁺ could behave as oxidants to oxidize Fe²⁺ for the in situ assembly of Fe₃O₄‐Ag/rGO without any addition of reductant/oxidant or organic solvents, and AgNPs endow the ternary hybrids with excellent catalytic behaviour. Meaningfully, the bioinspired process enables the ternary hybrids to possess more abundant micro?/nanopores, larger surface area, and more amorphization. They exhibit exceptional catalytic performance, and could be recycled with excellent activity by means of convenient magnetic separation (at least 7 times). Moreover, the ternary hybrids could degrade methylene blue under UV light due to different valence states of Fe in Fe₃O₄. Therefore, the proposed bioinspired assembly and structure design for hierarchical catalysts would pave a promising way to assemble other catalysts.     

Preparation,characterization and heterogeneous catalytic applications of GO/Fe3O4/HPW nanocomposite in chemoselective and green oxidation of alcohols with aqueous H2O2

Graphene oxide ‐ Fe₃O₄ ‐ NH₃⁺H₂PW₁₂O₄₀ ^‐ magnetic nanocomposite (GO/Fe₃O₄/HPW) was prepared by linking amino ‐ functionalized Fe₃O₄ nanoparticles (Fe₃O₄ ‐ NH₂) on the graphene oxide (GO), and then grafting 12 ‐ tungstophosphoric acid (H₃PW₁₂O₄₀) on the graphene oxide ‐ magnetite hybrid (GO ‐ Fe₃O₄ ‐ NH₂). The obtained GO/Fe₃O₄/HPW nanocomposite was well characterized with different techniques such as FT ‐ IR, TEM, SEM, XRD, EDX, TGA ‐ DTA, AGFM, ICP and BET measurements. The used techniques showed that the graphene oxide layers were well prepared and the various stages of preparation of the GO/Fe₃O₄/HPW nanocomposites successfully completed. This new nanocomposite displayed excellent performance as a heterogeneous catalyst in the oxidation of alcohols with H₂O₂. The as ‐ prepared GO/Fe₃O₄/HPW catalyst was more stable and recyclable at least five times without significantly reducing its catalytic activity.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Nano‐Fe3O4@SiO2‐SO3H: A magnetic,reusable solid‐acid catalyst for solvent‐free reduction of oximes to amines with the NaBH3CN/ZrCl4 system

In this study, the immobilization of sulfonic acid on silica‐layered magnetite was carried out by the reaction of ClSO₃H with silica‐layered magnetite. The prepared magnetic nanoparticles of Fe₃O₄@SiO₂‐SO₃H were then characterized using scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH₃CN in the presence of ZrCl₄. All reactions were carried out under solvent‐free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.     

A practical and highly efficient synthesis of densely functionalized nicotinonitrile derivatives catalyzed by zinc oxide‐decorated superparamagnetic silica attached to graphene oxide nanocomposite

Zinc oxide‐decorated superparamagnetic silica attached to graphene oxide (Fe₃O₄/SiO₂/PTS‐GO‐ZnO), as a novel nanocomposite, was designed, and its core‐shell structure was appropriately characterized by different spectroscopy or microscopy methods and thermal techniques as well as measuring of its porosity and magnetic properties. The catalytic activity of Fe₃O₄/SiO₂/PTS‐GO‐ZnO, as a reusable heterogeneous catalyst, was investigated for efficient one‐pot multi‐component synthesis of medicinally important functionalized 2‐amino‐6‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐arylnicotinonitrile derivatives. The significant features of the present procedure are mild reaction conditions, low loading of the catalyst, high to quantitative yields of the desired products, avoiding the use of toxic heavy metals or solvents, simple isolation and purification of the products, and stability as well as reusability of the catalyst after at least six consecutive runs.     

Fe3O4@SiO2‐PANI‐Au Nanocomposite Prepared for Electrochemical Determination of Quercetin in Food Samples and Biological Fluids

A new electrochemical sensor based on Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was fabricated for modification of glassy carbon electrode (Fe₃O₄@SiO₂‐PANI‐Au GCE). The Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was characterized by TEM, FESEM‐EDS‐Mapping, XRD, and TGA methods. The Fe₃O₄@SiO₂‐PANI‐Au GC electrode exhibited an acceptable sensitivity, fast electrochemical response, and good selectivity for determination of quercetin. Under optimal conditions, the linear range for quercetin concentrations using this sensor was 1.0×10^?8 to 1.5×10^?5 mol L^?1, and the limit of detection was 3.8×10^?9 mol L^?1. The results illustrated that the offered sensor could be a possible alternative for the measurement of quercetin in food samples and biological fluids.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

Biocatalytic Performance of pH‐Sensitive Magnetic Nanoparticles Derived from Layer‐by‐Layer Ionic Self‐Assembly of Chitosan with Glucoamylase

Based on the characteristics of polycations of chitosan and glucoamylase, which are oppositely charged, they were successfully alternatingly deposited onto the surface of aldehyde‐modified Fe₃O₄ nanoparticles by using a layer‐by‐layer ion exchange method to form magnetic carriers to construct multilayer films (designated as Fe₃O₄@(CS/GA)_n). The (CS/GA)_n film systems were endowed with the pH‐dependent properties of chitosan as well as the catalytic activity of glucoamylase. The changes in weight loss and surface chemistry, morphology, and magnetic sensitivity were monitored and verified by UV/Vis spectroscopy, zeta potential, TEM, and a vibrating sample magnetometer. Subsequently, the influence of the number of bilayers, storage stability, pH, temperature, and reusability of Fe₃O₄@(CS/GA)₅ biocatalysts on catalytic activity were investigated. The results from characterization and determination remarkably indicate that Fe₃O₄@(CS/GA)₅ presents excellent catalytic activity, storage stability, pH stability, and reusability in comparison with free enzyme. Fe₃O₄@(CS/GA)₅ retained >60 % of its initial activity at 65 °C over 6 h; the optimum temperature and pH also increased to the ranges of 45–65 °C and 2.5–3.5, respectively, and only 27 % activity was lost after 10 cycles. This new strategy simplifies the reaction protocol and improves encapsulation efficiency and catalytic activity for new potential applications in biotechnology.     

Graphene grafted silica‐coated Fe3O4 nanocomposite as absorbent for enrichment of carbamates from cucumbers and pears prior to HPLC

In this paper, a novel graphene (G) grafted silica‐coated Fe₃O₄ nanocomposite was fabricated by the chemical bonding of G onto the surface of silica‐coated Fe₃O₄ nanoparticles. Some carbamates (metolcarb, carbaryl, pirimicarb, and diethofencarb) in cucumber and pear samples were enriched by this nanocomposite prior to their determination by HPLC with UV detection. Experimental parameters that may affect the extraction efficiency were investigated. Under the optimum conditions, a linear response was achieved in the concentration range of 0.5–100.0 ng/g for metolcarb, carbaryl, and diethofencarb, and 1.0–100 ng/g for pirimicarb with the correlation coefficients (r) ranging from 0.9956 to 0.9984. The LOD (S/N = 3) of the method were found to be in the range from 0.08 to 0.2 ng/g. The RSDs were in the range from 2.4 to 5.8%. The results indicated that the G grafted silica‐coated Fe₃O₄ nanocomposite was stable and efficient for magnetic SPE and has a great application potential for the preconcentration of other organic pollutants from real samples.     

Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.