Synthesis of 1‐Arylethyl‐2‐arylethylamino‐5‐trifluoroacetyl‐1,2,3,4‐tetrahydropyridines and Related Compounds with Potential Cell Efflux Pump Inhibition

This study reports a simple, fast, and efficient method for the synthesis of a new series of 1‐arylethyl‐2‐arylethylamino‐5‐trifluoroacetyl‐1,2,3,4‐tetrahydropyridines and related compounds from the reaction of 2‐alkoxy‐5‐trifluoroacetyl‐3,4‐dihydro‐2H‐pyrans with 2‐arylethanamines and related 2‐ethanamines. The desired tetrahydropyridines were obtained in excellent yields (90–98%), through a reaction that can be described as an AAB′ three‐component reaction protocol following an ANRORC‐type mechanism.     

A kinetic study of the high temperature rearrangement of 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazole

The kinetics of the thermal rearrangement 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazoles, 1 , to the corresponding 1‐ethyl‐3,5‐diphenyl‐1‐alkyl‐1H‐1,2,4‐triazoles, 2 , was studied in 15‐Crown‐5 and octadecane at 330 °C. The reaction was very slow in octadecane but proceed well in 15‐Crown‐5. The reaction order for the reaction was not constant but changed from an initial second order rate law towards a first order rate law as the reaction progressed. This was confirmed by the concentration dependent reaction order, n_c, which was larger than the time dependent rate law, n_t. The rationale for the observation was, that at high substrate concentrations the reaction order was second order while at lower concentrations a competing solvent assisted reaction plays an increasing important role. The data were in agreement with a mechanism in which the neutral 4‐alkyl‐triazoles in an intermolecular nucleophilic displacement reaction form a triazolium triazolate, which in a subsequent nucleophilic reaction gives the observed product.     

Gold‐Catalyzed Formal C−C Bond Insertion Reaction of 2‐Aryl‐2‐diazoesters with 1,3‐Diketones

The transition‐metal‐catalyzed formal C−C bond insertion reaction of diazo compounds with monocarbonyl compounds is well established, but the related reaction of 1,3‐diketones instead gives C−H bond insertion products. Herein, we report a protocol for a gold‐catalyzed formal C−C bond insertion reaction of 2‐aryl‐2‐diazoesters with 1,3‐diketones, which provides efficient access to polycarbonyl compounds with an all‐carbon quaternary center. The aryl ester moiety plays a crucial role in the unusual chemoselectivity, and the addition of a Brønsted acid to the reaction mixture improves the yield of the C−C bond insertion product. A reaction mechanism involving cyclopropanation of a gold carbenoid with an enolate and ring‐opening of the resulting donor–acceptor‐type cyclopropane intermediate is proposed. This mechanism differs from that of the traditional Lewis‐acid‐catalyzed C−C bond insertion reaction of diazo compounds with monocarbonyl compounds, which involves a rearrangement of a zwitterion intermediate as a key step.     

An Efficient and Green Synthesis of 6‐Amino‐3‐phenyl‐4‐aryl‐1,4‐dihydropyrano [2,3‐c]pyrazole‐5‐carbonitrile Derivatives under Ultrasound Irradiation in Aqueous Medium

A facile and eco‐friendly approach for the synthesis of 6‐amino‐3‐phenyl‐4‐aryl‐1,4‐dihydropyrano[2,3‐c]pyrazole‐5‐carbonitrile derivatives via four‐component reaction of hydrazine, ethyl 3‐oxo‐3‐phenylpropanoate, aldehydes, and malononitrile is described. The reaction is performed in water, without using any catalyst, and under ultrasound irradiation. The developed sonochemical‐assisted multi‐component reaction provides an improved and accelerated conversion when compared with conventional procedure.     

An Environment‐friendly Synthesis of 2,3‐Disubstituted‐2‐iminothiazoline‐4‐ones

A series of 2,3‐substituted‐2‐iminothiazoline‐4‐ones derivatives have been synthesized via an improved method including an auto‐catalyzed reaction. This method avoided using any extra catalyst except for the reaction material. This method has been successful in both the aromatic substituted 2‐iminothiazolines and the alkyl substituted 2‐iminothiazolines. The special product with a hydroxyl group on the 2‐iminogroup of 1,3‐thiazoline‐4‐ones has also been obtained unexpectedly. The possible mechanism has been proposed for the special process of dealkylation and hydroxylation. This method offered a special way to afford the 2‐hydroxyimino‐substituted thiazoline‐4‐one derivatives in an efficient and eco‐friendly way. The mechanism of the transformation under acid condition has also been proposed.     

Microwave‐induced Stereoselectivity in Synthesis of trans‐4‐Aryl‐3‐methyl‐6‐oxo‐4,5,6,7‐tetrahydro‐2H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

A facile synthesis of trans isomers of 4‐aryl‐3‐methyl‐6‐oxo‐4,5,6,7‐tetrahydro ‐ 2H ‐ pyrazolo[3,4‐b]pyridine‐5‐carbonitriles via three‐component condensation reaction of an aldehyde, 3‐amino‐5‐methylpyrazole and ethyl cyanoacetate in acetonitrile has been developed under microwave irradiation. This one‐pot reaction proceeds without any catalyst in short times and gives the product in high selectivities and high yields.     

Space‐ and Time‐Resolved In‐situ Spectroscopy on the Coke Formation in Molecular Sieves: Methanol‐to‐Olefin Conversion over H‐ZSM‐5 and H‐SAPO‐34

Formation of coke in large H‐ZSM‐5 and H‐SAPO‐34 crystals during the methanol‐to‐olefin (MTO) reaction has been studied in a space‐ and time‐resolved manner. This has been made possible by applying a high‐temperature in‐situ cell in combination with micro‐spectroscopic techniques. The buildup of optically active carbonaceous species allows detection with UV/Vis microscopy, while a confocal fluorescence microscope in an upright configuration visualises the formation of coke molecules and their precursors inside the catalyst grains. In H‐ZSM‐5, coke is initially formed at the triangular crystal edges, in which straight channel openings reach directly the external crystal surface. At reaction temperatures ranging from 530 to 745 K, two absorption bands at around 415 and 550 nm were detected due to coke or its precursors. Confocal fluorescence microscopy reveals fluorescent carbonaceous species that initially form in the near‐surface area and gradually diffuse inwards the crystal in which internal intergrowth boundaries hinder a facile penetration for the more bulky aromatic compounds. In the case of H‐SAPO‐34 crystals, an absorption band at around 400 nm arises during the reaction. This band grows in intensity with time and then decreases if the reaction is carried out between 530 and 575 K, whereas at higher temperatures its intensity remains steady with time on stream. Formation of the fluorescent species during the course of the reaction is limited to the near‐surface region of the H‐SAPO‐34 crystals, thereby creating diffusion limitations for the coke front moving towards the middle of the crystal during the MTO reaction. The two applied micro‐spectroscopic techniques introduced allow us to distinguish between graphite‐like coke deposited on the external crystal surface and aromatic species formed inside the zeolite channels. The use of the methods can be extended to a wide variety of catalytic reactions and materials in which carbonaceous deposits are formed.     

溴化镁催化的1,2,3,4-四氢吡啶酮无溶剂合成研究

An efficient and environmentally friendly procedure for the one-pot synthesis of tetrahydropyrimidinones from aldehydes, β-diketones and urea/thiourea by using magnesium bromide as an inexpensive and easily available catalyst under solvent-free conditions was described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good to excellent yields (74%-94%) and short reaction time (45-90 min). The structure of the Biginelli reaction product from β-diketone, salicylaldehyde and urea has been proposed to possess an oxygen-bridge by cyclization (intramolecular Michael-addition).     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

ECEC and ECE‐Type Mechanisms in Electrochemical Oxidation of 4‐Substituted Catechols in the Presence of 4‐Hydroxy‐6‐methyl‐2‐pyrone

Electrochemical oxidation of 3,4‐dihydroxybenzoic acid ( 1 ) and 4‐tert‐butylcatechol ( 5 ) in the presence of 4‐hydroxy‐6‐methyl‐2‐pyrone ( 2 ) as nucleophile in aqueous solution has been studied using cyclic voltammetry and controlled‐potential coulometry. The results indicate that 1 via Michael reaction under electro‐decarboxylation reaction converts to heterocyclic compound 4 , and the quinone derived from 4‐tert‐butylcatechol ( 5 ) participates in Michael reaction with 2 and through an ECE mechanism converts to the corresponding o‐quinone ( 6a ). The electrochemical synthesis of 4 and 6a has been successfully performed in an undivided cell.     

High‐Yielding Synthesis of the Anti‐Influenza Neuraminidase Inhibitor (−)‐Oseltamivir by Two “One‐Pot” Sequences

The efficient asymmetric total synthesis of (?)‐oseltamivir, an antiviral reagent, has been accomplished by using two “one‐pot” reaction sequences, with excellent overall yield (60 %) and only one required purification by column chromatography. The first one‐pot reaction sequence consists of a diphenylprolinol silyl ether mediated asymmetric Michael reaction, a domino Michael reaction/Horner–Wadsworth–Emmons reaction combined with retro‐aldol/Horner–Wadsworth–Emmons reaction and retro Michael reactions, a thiol Michael reaction, and a base‐catalyzed isomerization. Six reactions can be successfully conducted in the second one‐pot reaction sequence; these are deprotection of a tert‐butyl ester and its conversion into an acyl chloride then an acyl azide, Curtius rearrangement, amide formation, reduction of a nitro group into an amine, and a retro Michael reaction of a thiol moiety. A column‐free synthesis of (?)‐oseltamivir has also been established.     

An Efficient Synthesis of N‐Substituted‐3‐aryl‐3‐(2‐hydroxy‐4,4‐dimethyl‐6‐oxocyclohex‐1‐enyl)propanamides by Four‐component Reaction in Aqueous Medium

A mild and efficient synthesis of N‐substituted‐3‐aryl‐3‐(2‐hydroxy‐4,4‐dimethyl‐6‐oxocyclohex‐1‐enyl)propanamides via four‐component reaction of an aldehyde, amine, Meldrum's acid and 5,5‐dimethylcyclo‐hexane‐1,3‐dione in the presence of benzyltriethylammonium chloride (TEBAC) in aqueous medium is described. This method has the advantages of accessible starting materials, good yields, mild reaction conditions and eco‐friendliness.     

A Green Synthesis of 2‐Amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles by a Step‐wise and One‐pot Three‐component Gewald Reaction

An eco‐friendly method has been developed for the synthesis of 2‐amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles from preliminary carbazole ( 1 ) through an intermediate of 2‐(1‐(9H‐carbazole‐3‐yl)ethylidene)malononitriles using the Knoevenagel condensation followed by the Gewald reaction. On the other hand, the target compounds could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of 1‐(9H‐carbazole‐3‐yl)ethanone ( 3 ), malononitrile, and elemental sulfur. The merits of this preparation are mild reaction conditions. The Gewald reaction is executed with inorganic base NaHCO₃ (H₂O) in tetrahydrofuran, easy work‐up procedure with good yields.     

Metallation reactions. XXXIV. Synthesis of 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives

The reaction of benzoxathiole‐3‐oxide with lithiumdiisopropylamide in tetrahydrofuran gave an anion, which was reacted with various aryl‐methyl‐ketones to give 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives. The reaction was carried out in different temperature conditions: at ‐88 °C the trans addition stereoisomers to the sulfoxide oxygen atom were the main products.     

Cycloadducts of Furan with Arynes Generated from 2‐Bromo‐1,4,5,8‐tetramethoxynaphthalene and 2,6‐Dibromo‐1,4,5,8‐tetramethoxynaphthalene

The reaction of 2‐bromo‐1,4,5,8‐tetramethoxynaphthalene ( 7 ) with sodium amide (or LDA) in the presence of a large excess of furan gave the epoxy compound 9 . The similar reaction of 2,6‐dibromo‐1,4,5,8‐tetramethoxynaphthalene ( 8 ) afforded the diepoxy compound 10 . The crystal structure of antidiepoxide 10 was determined by an X‐ray crystallography.     

Hydroaluminierung: Synthese,Struktur und Eigenschaften von 1‐Methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octan und des Alan‐triallylamin‐Adduktes

Hydro‐Alumination: Synthesis, Structure, and Properties of 1‐Methyl‐ cis ‐1‐azonia‐5‐alabicyclo[3.3.0]octane and of the Alan‐triallylamine Adduct The alan‐N‐methyl‐diallylamine adduct ( I ) was obtained by the reaction of N,N‐diallyl‐methyl‐ammoniumchloride with LiAlH₄. Subsequently the reaction product was transformed by intramolecular hydro‐alumination reaction into bis(1‐methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octane) ( II ). In contrast to I , the bis(alan‐triallylamine) adduct ( III ) does not undergo an analogous hydro‐alumination reaction. The compounds I , II and III were characterized by MS, IR, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and the X‐ray structures of II and III are reported and discussed.     

Catalytic Asymmetric Inverse‐Electron‐Demand Oxa‐Diels–Alder Reaction of In Situ Generated ortho‐Quinone Methides with 3‐Methyl‐2‐Vinylindoles

The first catalytic asymmetric inverse‐electron‐demand (IED) oxa‐Diels–Alder reaction of ortho‐quinone methides, generated in situ from ortho‐hydroxybenzyl alcohols, has been established. By selecting 3‐methyl‐2‐vinylindoles as a class of competent dienophiles, this approach provides an efficient strategy to construct an enantioenriched chroman framework with three adjacent stereogenic centers in high yields and excellent stereoselectivities (up to 99 % yield, >95:5 d.r., 99.5:0.5 e.r.). The utilization of ortho‐hydroxybenzyl alcohols as precursors of dienes and 3‐methyl‐2‐vinylindoles as dienophiles, as well as the hydrogen‐bonding activation mode of the substrates met the challenges of a catalytic asymmetric IED oxa‐Diels–Alder reaction.     

A simple synthesis of 5‐ethoxycarbonyl‐6‐phenyl‐1,3‐dioxin‐4‐ones and ethyl 3‐benzoyl‐4‐oxo‐2,6‐diphenylpyran‐5‐carboxylate

4‐Ethoxycarbonyl‐5‐phenyl‐2,3‐dihydrofuran‐2,3‐dione 1 reacts with aldehydes via the acylketene intermediate 2 giving the 1,3‐dioxin‐4‐ones 3a‐e and the 1,4‐bis(5‐ethoxycarbonyl‐4‐oxo‐6‐phenyl‐4H‐1,3‐dioxin‐2‐yl)benzene 4 , and a one step reaction between dibenzoylmethane and oxalylchloride gave 3,5‐dibenzoyl‐2,6‐diphenyl‐4‐pyrone 7 . The reaction of 1 with dibenzoylmethane, a dicarbonyl compound, provided ethyl 3‐benzoyl‐4‐oxo‐2,6‐diphenylpyran‐5‐carboxylate derivative 9 . Compound 9 was converted into the corresponding ethyl 3‐benzoyl‐4‐hydroxy‐2,6‐diphenylpyridine‐5‐carboxylate derivative 10 via its reaction with ammonium hydroxyde solution in 1 ‐butanol.     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.     

A Concise Synthesis of 2‐Amino‐1,2,3,4‐tetrahydronaphthalene‐6,7‐diol (‘6,7‐ADTN’) from Naphthalene‐2,3‐diol

2‐Amino‐1,2,3,4‐tetrahydronaphthalene‐6,7‐diol ( 2 ; 6,7‐ADTN) was synthesized starting from naphthalene‐2,3‐diol in seven steps and with an overall yield of 44%. Methylation of naphthalene‐2,3‐diol with dimethyl sulfate, followed by Friedel? Crafts acylation with AcCl, gave 2‐acetyl‐6,7‐dimethoxynaphthalene. 2‐Acetyl‐6,7‐dimethoxynaphthalene was converted to 6,7‐dimethoxynaphthalene‐2‐carboxylic acid by a haloform reaction. Birch reduction of the carboxylic acid with 4 mol‐equiv. of Na in liquid ammonia afforded 1,2,3,4‐tetrahydro‐6,7‐dimethoxynaphthalene‐2‐carboxylic acid, from which 2 was obtained by a Curtius reaction, followed by hydrogenolysis and demethylation.