Electrochemical Analysis of Glycoprotein Samples Prepared on a Pneumatically‐controlled Microfluidic Device

In this work, we designed and manufactured a microfluidic device for isolation and purification of glycoprotein samples. The conceived sample preparation device was fabricated in polycarbonate by micro‐milling. The flow control and the fluid dosage into the micro‐channels was solved by equipping the device with integrated pneumatic valves. The biochemical functionality was provided by beaded support modified by molecules with affinity to glycoproteins which was stacked inside the micro‐channel reminiscent of packed affinity columns used in glycoprotein lectin assays. Unlabeled glycoproteins, namely fetuin, asialofetuin, and prostate‐specific antigen, were voltammetrically analyzed using catalytic peak H at silver amalgam electrode.     

Electrochemical Determination of Sulphur‐containing Pharmaceuticals Using Boron‐doped Diamond Electrodes

N‐acetylcysteine (NAC) and gentamicin sulfate (GS) are biologically and pharmaceutically relevant thiol‐containing compounds. NAC is well known for its antioxidant properties, whereas GS is an aminoglycoside that is used as a broadband antibiotic. Both pharmaceuticals play a significant role in the treatment of bacterial infections by suppressing the formation of biofilms. According to the European Pharmacopeia protocol, GS is analyzed by high performance liquid chromatography (HPLC) using gold electrodes for electrochemical detection. Here, we report the electrochemical detection of these compounds at NH₂‐terminated boron‐doped diamond electrodes, which show significantly reduced electrode passivation, an issue commonly known for gold electrodes. Cyclic voltammetry experiments performed for a period of 70 minutes showed that the peak current decreased only by 1.6 %/7.4 % for the two peak currents recorded for GS, and 6.6 % for the oxidation peak of NAC, whereas at gold electrodes a decrease in peak current of 14.2 % was observed for GS, and of 64 %/30 % for the two peak currents of NAC. For their quantitative determination, differential pulse voltammetry was performed in a concentration range of 2–49 µg/mL of NAC with a limit of detection (LOD) of 1.527 µg/mL, and a limit of quantification (LOQ) of 3.624 µg/mL, respectively. The quantification of GS in a concentration range of 0.2–50 µg/mL resulted in a LOD of 1.714 µg/mL, and a LOQ of 6.420 µg/mL, respectively.     

Effect of Ionic Liquid Structure on the Electrochemical Response of Dopamine at Room Temperature Ionic Liquid‐modified Carbon Paste Electrodes (IL–CPE)

In this work 12 different ionic liquids (ILs) have been used added as co‐binders in the preparation of modified carbon paste electrodes (IL–CPEs) used for the voltammetric analysis of dopamine in Britton‐Robinson buffer. The ionic liquids studied were selected based on three main criteria: (1) increasing chain length of alkyl substituents (studying 1‐ethylimidazolium and ethyl, propyl, butyl, hexyl and decylmethylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids); (2) nature of the counter ion (dicyanamide, bis(trifluoromethylsulfonyl)imide and hexafluorophosphate) in 1‐butyl‐3‐methylimidazolium ionic liquids; and (3) cation ring structures (1‐butyl‐3‐methylimidazolium, 1‐butyl‐1‐methylpiperidinium, 1‐butyl‐1‐methylpyrrolidinium and 1‐butyl‐3‐methylpyridinium) in bis(trifluoromethylsulfonyl)imide or hexafluorophosphate (1‐butyl‐3‐methylimidazolium or 1‐butyl‐3‐methylpyridinium as cations) ionic liquids. The use of IL as co‐binders in IL–CPE results in a general enhancement of both the sensitivity and the reversibility of dopamine oxidation. In square wave voltammetry experiments, the peak current increased up to a 400 % when 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as co‐binder, as compared to the response found with the unmodified CPE. Experimental data provide evidence that electrostatic and steric effects are the most important ones vis‐à‐vis these electrocatalytic effects on the anodic oxidation of dopamine on IL–CPE. The relative hydrophilicity of dicyanamide anions reduced the electrocatalytic effects of the corresponding ionic liquids, while the use of 1‐ethyl‐3‐methylimidazolium hexafluorophosphate or 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (two relatively small and highly hydrophobic ionic liquids) as co‐binders in IL–CPE resulted in the highest electrocatalytic activity among all of the IL–CPE studied.     

Simultaneous Electrochemical Detection of Co(II) and Cu(II) by 1‐Diazo‐2‐Naphthol‐4‐Sulfonic Acid/MWCNTs Modified Electrode

This work describes a simple preparation of 1‐diazo‐2‐naphthol‐4‐sulfonic acid (1,2,4‐acid) and multiwalled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) for the simultaneous detection of Co(II) and Cu(II). MWCNTs, with their good conductivity and large surface area, were drop‐casted onto the surface of the GCE prior to the electrodeposition of 1,2,4‐acid, a metal chelating agent. Co(II) and Cu(II) were simultaneously measured by differential pulse anodic stripping voltammetry (DPASV) in a batch system. Under optimum conditions, the linear range of Co(II) was between 0.10 and 2.5 μg mL⁻¹ with an LOD of 80 ng mL⁻¹. Two linear ranges were obtained for Cu(II), 0.0050 to 0.030 μg mL⁻¹ and 0.040 to 0.25 μg mL⁻¹,with an LOD of 2.4 ng mL⁻¹. The method offered a high operational stability for up to 52 measurements (RSD=3.4 % for Co(II) and 2.6 % for Cu(II)) and good reproducibility (RSD=1.2 % for Co(II) and 1.7 % for Cu(II)). In the simultaneous detection of Co(II) and Cu(II), there was no effect from common interferences found in wastewater. The method was successfully applied in real water samples with good recoveries (88.2±0.8 to 102.0±0.8 % for Co(II) and 96.5±0.4 to 103.8±0.9 % for Cu(II)) and the results were in good agreement with those obtained from inductively coupled plasma optical emission spectrometry (ICP‐OES) (P >0.05).     

Electrochemical Reduction of 1,2-Di（p-tolylimino）ethane and 1,2-Di（2,4-dimethylphenylimino）ethane in Dimethylformamide

1,2-Di（p-tolylimino）ethane （Ⅰ） and 1,2-Di（2,4-dimethylphenylimino）ethane （Ⅱ） were synthesized and their electrochemical behavior investigated in dimethylformamide using classical voltammetry, differential pulse voltammetry, cyclic voltammetry, chronoamperometry, controlled potential electrolysis and coulometry. Both bis-Schiff base ligands examined show a cathodic irreversible peak which corresponds to one-electron reduction of the substrate to form anion radical. According to the fact obtained from cyclic voltammetry, that the current function （ip/v^1/2） is a decreasing function of the scan rate, it can be concluded that there is a following coupling chemical reaction （EC mechanism）. Thus, the most probable mechanism of electroreduction of both ligands is the coupling of two radicals to form a dimer.     

Electrochemical and Spectroelectrochemical Analysis of 4‐(4‐(5‐Phenyl‐1,3,4‐oxadiazole‐2‐yl)phenoxy)‐Substituted Cobalt(II), Lead(II) and Metal‐Free Phthalocyanines

Electrochemical and spectroelectrochemical analyses of 4‐(4‐(5‐phenyl‐1,3,4‐oxadiazole‐2‐yl)phenoxy)‐substituted metal‐free phthalocyanine ( H₂Pc ( 1 )) and metallated phthalocyanines ( PbPc ( 2 ) and CoPc ( 3 )) were performed in solution. Voltammetric characterizations of the phthalocyanine complexes were investigated by using cyclic voltammetry and square wave voltammetry techniques. CoPc ( 3 ) gave common metal and ring based electron transfer reactions; however they split due to the aggregation. Although PbPc ( 2 ) illustrated reversible reduction processes during the voltammetric measurements, it was de‐metallized and thus turned to the metal free phthalocyanine during repetitive voltammetric cycles and in situ spectroelectrochemical measurements.     

Electrochemical Determination of the “Furanic Index” in Honey

5-(hydroxymethyl)furan-2-carbaldehyde, better known as hydroxymethylfurfural (HMF), is a well-known freshness parameter of honey: although mostly absent in fresh samples, its concentration tends to increase naturally with aging. However, high quantities of HMF are also found in fresh but adulterated samples or honey subjected to thermal or photochemical stresses. In addition, HMF deserves further consideration due to its potential toxic effects on human health. The processes at the origin of HMF formation in honey and in other foods, containing saccharides and proteins—mainly non-enzymatic browning reactions—can also produce other furanic compounds. Among others, 2-furaldehyde (2F) and 2-furoic acid (2FA) are the most abundant in honey, but also their isomers (i.e., 3-furaldehyde, 3F, and 3-furoic acid, 3FA) have been found in it, although in small quantities. A preliminary characterization of HMF, 2F, 2FA, 3F, and 3FA by cyclic voltammetry (CV) led to hypothesizing the possibility of a comprehensive quantitative determination of all these compounds using a simple and accurate square wave voltammetry (SWV) method. Therefore, a new parameter able to provide indications on quality of honey, named “Furanic Index” (FI), was proposed in this contribution, which is based on the simultaneous reduction of all analytes on an Hg electrode to ca. −1.50 V vs. Saturated Calomel Electrode (SCE). The proposed method, validated, and tested on 10 samples of honeys of different botanical origin and age, is fast and accurate, and, in the case of strawberry tree honey (Arbutus unedo), it highlighted the contribution to the FI of the homogentisic acid (HA), i.e., the chemical marker of the floral origin of this honey, which was quantitatively reduced in the working conditions. Excellent agreement between the SWV and Reverse-Phase High-Performance Liquid Chromatography (RP-HPLC) data was observed in all samples considered.     

As(III) Voltammetric Detection by Means of Disposable Screen‐Printed Gold Electrochemical Sensors

Abstract

In this paper a disposable gold screen‐printed working electrode was tested for arsenic detection in aqueous solutions using Square Wave Anodic Stripping Voltammetry (SWASV). The dynamic range of the sensor and its response were characterised in standard As(III) solutions; particular efforts were devoted to optimize electrode surface conditioning and electrolyte solution composition. The detection limit was 2.5 µg l^?1 using 60 s as deposition time. A portable battery‐operated device was used to demonstrate the possibility to use the sensor for on‐site analysis. Analysis of spiked samples was also performed.     

电化学测定谷胱甘肽方法的研究

采用循环伏安扫描的方法, 促进谷胱甘肽与邻苯醌亲核加成产物在玻碳电极表面的生成和富集. 在此后的差分脉冲分析中, 邻苯醌的还原峰与谷胱甘肽-邻苯醌加合物的还原峰完全分开, 实现了谷胱甘肽的单独测定. 研究了溶液pH值, 邻苯二酚浓度及循环伏安扫描条件对谷胱甘肽测定的影响. 在优化的条件下, 测定谷胱甘肽的检测限为0.05 µmol/L, 线性范围是0.1 µmol/L～1.7 µmol/L, 同时抗坏血酸, 甘氨酸, L-酪氨酸, L-赖氨酸和半胱氨酸对测定没有干扰. 此电化学测定谷胱甘肽方法选择性好、灵敏度高.     

Graphite Based Microsensors Developed for the Electrochemical Determination of L‐Tyrosine from Pharmaceutical Samples

Two electrochemical sensors were proposed for the determination of L‐tyrosine from pharmaceutical capsules. The electrochemical sensors were based on plain graphite paste and chitosan modified graphite paste. Working conditions, e. g. pH, supporting electrolytes have been optimized. The results revealed for both electrodes very low limits of quantification (LOQ) (0.18 mg L^?1 and 0.0018 mg L^?1) for plain graphite paste based sensors and for chitosan modified paste sensors respectively. A higher sensitivity of 7.95×10^?10 A mg L^?1 was obtained for the sensor based on plain graphite paste (G). The uniformity content test showed that L‐Tyrosine can be recovered in pharmaceutical capsules with an average value higher than 98.00 % and a relative standard deviation (RSD%) value less than 1.00 % (N=5).     

Determination of Selenium with a Poly(1,8‐diamino‐naphthalene)‐Modified Electrode

The performance of a poly(1,8‐diaminonaphthalene)‐modified electrode for the determination of the Se(IV) ion in an aqueous medium was investigated with anodic stripping voltammetry without the pretreating of the sample. The experimental parameters for the analysis of Se(IV) were optimized and the characteristics of this polymer‐modified electrode were investigated by using cyclic voltammetry. The Se(IV) ions were chemically deposited onto the surface of the pDAN‐Au electrode in an acidic medium. The detection limit employing the anodic stripping differential pulse voltammetry was 9.0×10^?9 M for Se(IV) with 4.4 % of RSD. Satisfactory result for the determination of Se(IV) was acquired employing a certified standard urine reference material, SRM's 2670 (trace element in urine) with 4.1 ppb of SD.     

Electrocatalytic Determination of the antibiotic Levofloxacin using modified carbon paste electrode with a poly-murexide thin film voltammetrically

In this work, a simple, cheap, sensitive, and selective modified carbon paste electrode is proposed for the electroanalytical determination of Levofloxacin (LEVO), the drug used to treat pneumonia caused by coronavirus. The electrochemical polymerization method was applied to create a thin poly-murexide film (POMUR) on the bare carbon paste electrode (BCPE) surface to enhance its electrocatalytic activity. The peak current response of LEVO obtained by POMUR/CPE was increased by 14.2 μA compared to BCPE. Scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques were employed to characterize BCPE and POMUR/CPE. Under the optimal experimental circumstances, the prepared sensor was capable of determining LEVO with a low limit of detection (LOD) of 7.18 nM (S/N = 3) for a linear dynamic range of 25 – 1 × 10³ nM utilizing differential pulse voltammetry (DPV). Moreover, the practical applicability of POMUR/CPE for determining LEVO in pharmaceutical formulations and biological samples (human serum) demonstrated high sensitivity and selectivity with a recovery of 95.08 – 100.5 %.     

Fe3O4 Nanorods-RGO-ionic Liquid Nanocomposite Based Electrochemical Sensor for Aflatoxin B1 in Ground Paprika

A novel and sensitive method for the determination of aflatoxin B1 (AFA−B1) in ground paprika using a methyltrioctylammonium chloride ionic liquid (IL), iron oxide nanorods (Fe₃O₄ nanorods) and reduced graphene oxide (RGO) fabricated glassy carbon electrode (GCE) was developed. The synthesized nanoparticles, nanocomposites and modified electrode surfaces were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA/DSC) and x-ray diffraction (XRD) analyses. Moreover, the electrochemical performance of the developed sensor was determined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The obtained results demonstrate that the sensitivity of AFA−B1 is significantly enhanced on RGO-Fe₃O₄ nanorods-IL-GCE in comparison with bare GCE, RGO-GCE and RGO-Fe₃O₄ nanorods-GCE. The redox peak currents of AFA−B1 exhibited good linear relationship with its concentration in the range from 0.02 to 0.33 ng mL⁻¹ with detection limit of (LOD) 0.03 ng mL⁻¹ and limit of quantification (LOQ) 0.36 ng mL⁻¹ respectively (S/N=3). In addition, the fabricated electrode showed good stability and reproducibility. The proposed technique was effectively applied to identify the AFA−B1 in real ground paprika samples with acceptable results.     

Sensitive and Profitable Electrochemical Detection of Uric Acid in the Presence of Dopamine with a Novel Carbon Paste Electrode Decorated with a Copper(II) Complex

A new microcomposite with copper(II) complex and carbon paste (Cu_C/CPE) was developed to determine the uric acid (UA) content in the presence of dopamine (DP) and was characterized via cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and energy dispersive spectroscopy (EDS). The results showed high selectivity for UA compared with DP because the anodic peak currents for DP were near those of a CPE without Cu_c and were considerably increased for UA. The UA and DP increases were 86.9 % and 14.3 %, respectively, according to CV and 96.6 % and 25.5 %, respectively, according to square wave voltammetry (SWV) with the Cu_C/CPE. Moreover, the anodic peak separation for UA and DP was 0.17 V. With optimal parameters (pH, 3.3; adsorption time(t_ADS), 30 s;adsorption potential (E_ADS)_, 0.10 V), the anodic peak currents for UA were proportional to concentrations between 1.6 and 14.4 μmol L^?1 using standard solutions with UA concentrations ranging from 8.0–40.5 μmol L^?1 and real samples. The UA detection limit was 0.13 μmol L^?1. The new sensor was used to determine the UA contentin human urine samples, and the method was checked with a urine chemistry control from Bio‐Rad based on human urine spiked with quantities of UA and showed a recovery between 84 % and 106 % at concentrations below 10.0 μmol L^?1.     

Influence of Temperatures on the Tautomerism of the N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine and Investigation of Its Electrochemical Behaviour

Synthesis of N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine was carried out under microwave irradiation (MWI) conditions. Dynamic ¹H NMR investigation of N‐(1H‐imidazoline‐2‐yl)‐1H‐benzimidazol‐2‐amine compound was reported at temperature range of 223–333 K in DMF‐d₇. Some physical parameters, such as coalescence temperature (T_c), the free energy of activation (ΔG^??) and rate constant (k) values were calculated from its ¹H NMR spectra at various temperatures. Electrochemical feature of this compound was investigated by cyclic (CV) and square wave voltammetry (SWV).     

Electrochemical modification of a carbon paste electrode with poly (1,5-diaminonaphthalene) and copper-cobalt nanostructures for the determination of thioctic acid in real samples

This study used square-wave voltammetry and cyclic voltammetry to investigate the electrochemical oxidation of Thioctic Acid (TA) on a Carbon Paste Electrode (CPE) modified with copper-cobalt nanostructures and poly (1,5-Diaminonaphthalene). The voltammetric sensor was sensitive to the oxidation of TA. In addition, we optimized the effects of multiple cycles of deposition of Cu-Co nanostructures, and electro-polymerization of monomer 1,5-DAN, scan rate, and pH. The sensor showed good identification capabilities for TA. The linear responses obtained ranged from 0.6 μM to 150 μM with a detection limit of 0.48 μM for the modified CPE. The adsorption process controlled the oxidation of TA. We used the proposed sensor and method to determine TA in real samples.     

Spectral and Electrochemical Investigation of Intercalations of Adrenaline and CT－DNA

A strong interaction between double stranded calf-thymus DNA (ds-DNA) and adrenaline in solution, but no interaction between single stranded calf-thymus DNA (ss-DNA) and adrenaline was observed by the use of UV-visible spectroscopy and voltammetric techniques. It is suggested that the interaction leads to an intercalation of adrenaline molecules into the groove of ds-DNA and the formation of ds-DNA (adrenallne)n complex. The binding site size of the interaction of adrenaline with CT-DNA in nucleotide phosphate [ NP] has been determined as 25. The interaction of different concentration adrenaline with DNA modified GCE shows that the DNA modified GCE can be a good tool to detect lower concentration adrenaline.     

Electrochemical Characteristics of 4‐oxo‐4H‐pyran‐dicarboxylic Acid (Chelidonic Acid) and some of its Metal Complexes

A few novel metal complexes of chelidonic acid (chelH₂), namely [Ca(chel)(H₂O)₃] ( 1 ), [Cu(chel)(H₂O)₅] ⋅ 2H₂O ( 2 ) and [VO(chel)(H₂O)₃] ⋅ 2H₂O ( 3 ) were prepared, identified by elemental analysis and characterized by electrochemical methods. IR‐spectra and thermal stability in solid state are discussed as well. The electrochemical characteristics of the free chelidonic acid and its complexes 1 – 3 were studied by (cyclic) square‐wave voltammetry, on static mercury drop electrode (SMDE) and paraffin‐impregnated graphite electrode (PIGE), in aqueous media over a wide pH range. The reduction of chelidonic acid on SMDE is a kinetically controlled electrode reaction, occurring with the transfer of one electron and two protons for 1<pH<6, whereas in very alkaline media the electron transfer is pH independent, i.e . the mechanism of electro‐reduction of chelH₂ is proposed. The experimental parameters of the electroanalytical procedure were optimized and the method was applied for the investigation of the metal ion coordination preferences toward chelidonic acid. For the direct determination of solid complexes 1 – 3 , SW voltammetry of microparticles was used.     

配位聚合物[Cu(pa)(vim)2]n的合成、晶体结构和电化学性质研究

本文合成了一种新型配位聚合物[Cu(pa)(vim)2]n(pa为邻苯二甲酸阴离子,vim为1-乙烯基-1H-咪唑),并用x射线单晶衍射仪和元素分析表征了其单晶结构。晶体属单斜晶系,C2/c空间群,晶胞参数分别为：a＝1.6527(3) nm, b＝0.81800(16) nm, c＝1.4463(3) nm, β＝113.19(3)°, V＝1.7973(7) nm3, Z＝4, Dc＝1.537 g?cm－3。 [I＞2σ(I)]时：R1＝0.0476, wR2＝0.1235,对所有数据：R1＝0.0693, wR2＝0.1355。配合物的结构中存在沿着c轴的zigzag聚合链。每个铜原子位于晶体中心,与两个N原子和两个O原子进行配位,形成了扭曲的平面结构。电化学研究表明在配合物中Cu2+/Cu+的氧化还原是一个单电子的准可逆过程。     

Mechanistic Study of the Titanocene(III)‐Catalyzed Radical Arylation of Epoxides

An atom‐economical and catalytic arylation of epoxide‐derived radicals is described. The key step of the catalytic system is a sequential electron and proton transfer for the rearomatization of the radical σ‐complex and catalyst regeneration. Kinetic, computational, spectroscopic, and cyclovoltammetric investigations highlight the key issues of the reaction mechanism and catalyst stabilization by collidine hydrochloride. Studies employing radicophiles rule out the participation of cations as reactive intermediates.