Electrochemical Oxidation of Donepezil and Its Voltammetric Determination at Gold Electrode

The oxidative ability of donepezil, a frequently prescribed drug for the treatment of Alzheimer’s disease is reported for the first time at a gold electrode. It was oxidized by cyclic voltammetry and determined by square wave voltammetry in phosphate buffer electrolyte. Electrochemical degradation of donepezil was carried out by long term potential cycling. The identification and characterization of the major product, isolated by preparative high performance liquid chromatography, was performed by high resolution mass spectrometry and 1D and 2D nuclear magnetic resonance spectroscopy. Donepezil hydroxy derivative was identified as the major electrochemical oxidation product from donepezil.     

Development of an Electrochemical Sensor for Selective Determination of Dopamine Based on Molecularly Imprinted Poly(p-aminothiophenol) Polymeric Film

In this study, a molecularly imprinted electrochemical sensor (MIP/DA) was investigated for selective and sensitive determination of dopamine (DA) by electrochemical polymerization of p-aminothiophenol in the presence of DA on gold electrode. According to electrochemical behaviour of the sensor, gained through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), MIP/DA sensor showed distinctive electron transfer characteristics in comparison to the non-imprinted (NIP/DA) sensor. Besides the MIP/DA sensor showed high selectivity for dopamine through its analyte specific cavities. The sensor had a broad working range of 5.0×10⁻⁸–2.0×10⁻⁷ M with a limit of detection (LOD) of 1.8×10⁻⁸ M and the developed sensor was successfully applied for determination of dopamine in pharmaceutical samples.     

Electrochemical Morphine Sensor Based on Gold Nanoparticles Metalphthalocyanine Modified Carbon Paste Electrode

Composites of gold nanoparticles (Au) electrochemically deposited and different metal phthalocyanines (Co, Ni, Cu, and Fe) were chemically prepared. The composites were used as modifiers for carbon paste electrodes and were used for the determination of morphine in presence of ascorbic acid and uric acid. Central metal atoms of phthalocyanine moiety affected the rate of electron transfer. Thus, the electroactivity of different modifiers were evaluated towards morphine oxidation. Au‐CoPcM‐CPE possessed the highest rate for charge transfer rate in all studied pH electrolytes. Limit of detection was 5.48×10^?9 mol L^?1 in the range of 4.0×10^?7 to 9.0×10^?4 mol L^?1.     

A Prototype of Electrochemical Sensor for Measurements of Carbonyl Compounds in Air

The paper presents the results of investigation on a prototype sensor for measurements of benzaldehyde and formaldehyde in air. Sensitivity, limit of quantification and coefficient of selectivity of the sensor have been determined as a function of membrane thickness and electrode type using square wave voltammetry (SWV) technique. The working and counter electrodes were made of platinum and gold. Ionic liquids 1‐hexyl, 3‐methylimidazolium bis(trifluoromethanesulfonyl)imide constituted an internal electrolyte. Polydimethylsiloxane (PDMS) membrane separated gaseous medium from the electrolyte.     

A Simple and Sensitive Poly‐1,5‐Diaminonaphthalene Modified Sensor for the Determination of Sulfamethoxazole in Biological Samples

Sulfamethoxazole (SMZ), an antibacterial sulfonamide drug, has been selectively determined using poly‐1,5‐diaminonaphthalene (p‐DAN) modified glassy carbon electrode (GCE). The modified sensor was characterized by field emission scanning electron microscopy (FE‐SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). SMZ showed linear response in the concentration range of 0.5–150 µM by using square wave voltammetry (SWV) and the detection limit was found to be 0.05 nM with sensitivity of 0.085 µA µM^?1. The proposed sensor has been successfully employed to determine SMZ in the pharmaceutical tablets and human urine samples.     

Effect of Cetyltrimethyl Ammonium Bromide on Electrochemical Determination of Dexamethasone

The effect of surfactants on the electrochemical determination of dexamethasone at an edge plane pyrolytic graphite electrode (EPPGE), modified with single‐walled carbon nanotubes (SWNT) has been investigated. The unique electrocatalytic properties of SWNT along with the synergistic adsorption of CTAB on SWNT lead to sensitive voltammetric response of dexamethasone with the reduction peak at ca. ?1195 mV. The limit of detection and sensitivity of dexamethasone is estimated to be 9.1×10^?10 M and 0.727 µA µM^?1 respectively. The SWNT coated EPPGE had good stability and reproducibility. The analytical utility of the developed method was evaluated by applying it for sensing the drug in human body fluids and for the determination of dexamethasone content in several commercially available pharmaceutical preparations. A comparison of the observed results of proposed method with HPLC clearly indicates that the results of both the methods are in good agreement. The product obtained after the reduction of dexamethasone has also been characterized using ¹H NMR and carbonyl group at position 3 has been found to reduce. The method is instant, simple and accurate and can be easily applied for detecting cases of doping.     

A Highly Efficient ZrO2 Nanoparticle Based Electrochemical Sensor for the Detection of Organophosphorus Pesticides

A sensitive electrochemical method for square‐wave voltammetric detection of organophosphate (OP) compounds was developed based on zirconia (ZrO₂) nanoparticles modified electrode. The electrode was fabricated using electrochemical deposition and characterized by scanning electron microscopy (SEM), which confirmed the successful formation of nanoparticles. Due to the strong affinity of ZrO₂ with the phosphoric group, nitroaromatic OPs can strongly bind to the surface of ZrO₂ nanoparticles (ZrO₂NPs). Under optimized operational conditions, SWV was employed for Omethoate (a model of OP compounds) detection with 5 min absorption, which showed a wide detection range from 98.5 pmol·L^?1 to 985 nmol·L^?1, with a detection limit as low as 52.5 pmol·L^?1. This electrochemical sensor has good selectivity, stability and reproducibility, and great potential in the detection of OP compounds in agriculture area.     

Electrochemical Studies of Ochratoxin A Mycotoxin at Gold Electrodes Modified with Cysteamine Self‐Assembled Monolayers. Its Ultrasensitive Quantification in Red Wine Samples

The quantification of ochratoxin A is studied at cysteamine self‐assembled monolayer modified gold electrodes in red wine samples by square wave voltammetry. Detection and quantification limits of 0.004 µg L^?1 and 0.012 µg L^?1, respectively, were determined. The recovery percentages were in the range from 146 % to 94.0 % at spiking levels ranging from 0.02 to 5 µg L^?1. The variation coefficients for within‐laboratory repeatability varied from 31.4 to 11.5 % for spiked level from 0.02 to 2.0 µg L^?1. The developed electrochemical method is efficient, reproducible, and ultrasensitive for the quantification of OTA in red wine samples.     

On the Utilization of Boron Doped Diamond Electrode as a Sensor for Parathion and as an Anode for Electrochemical Combustion Of Parathion

This work proposes the utilization of a boron doped diamond (BDD) electrode as a sensor for pesticides and as well as an anode for electrochemical combustion of Parathion in spiked, pure and natural waters. The square‐wave voltammetry was selected as the electroanalytical technique and the Britton–Robinson buffer as the electrolyte. The electrochemical reduction responses of Parathion were analyzed and compared with those previously obtained using a hanging mercury electrode (HMDE). The detection and quantification limits were calculated from the analytical curves both for BDD and HMDE in Milli‐Q water (2.4 and 7.9 μg L^?1 and 3.9 and 12.8 μg L^?1 respectively) showing only a slight improvement when used BDD. However, if the application involves polluted natural waters the improvement is accentuated due to the very low adsorption characteristics of BDD, which prevent the fouling of electrode surface by organic pollutants. The BDD was also used as anode for electrochemical remediation of Parathion contamination. In this case, electrolysis was carried out in high positive potential (3.0 V) and lead the electrochemical combustion of Parathion to CO₂ and H₂O, as measured by the diminishing of total organic carbon in the electrolyte.     

A Nitrite Electrochemical Sensor Based on Boron‐Doped Diamond Planar Electrochemical Microcells Modified with a Monolacunary Silicotungstate Polyoxoanion

A new boron doped diamond microcells (BDD) was modified, for rapid, selective and highly sensitive determination of nitrite, using a coating film of polyoxometalates (POMs), formed by cyclic voltammetry on the molecular p‐phenylenediamine (PPD) functionalized BDD. The scanning electron microscopy (SEM) technique was used to examine the morphology of (PPD/SiW₁₁) modified (BDD) electrode. It was found that (SiW₁₁) layer was uniformly formed on the electrode surface. It was observed that (BDD/PPD/SiW₁₁) showed excellent electrocatalytic activities towards nitrite ion. Under the selected conditions, the anodic peak maximum at ?0.6 V was linear versus nitrite concentration in the 40 µM–4 mM range, and the detection limit obtained was 20 µM. The newly developed electrode has been successfully applied to the determination of nitrite content in real river water samples.     

金电极上苯二酚异构体的电化学性质及同时测定

采用循环伏安法研究了邻苯二酚(CAT)、间苯二酚（RE）和对苯二酚(HQ)在0.5 mol/L硫酸水溶液中的电化学行为,循环伏安法和差分脉冲伏安法研究了CAT、RE 和HQ共存体系的伏安行为。 实验结果表明,在pH=0的硫酸水溶液中,扫描速率为10 mV/s,循环伏安法扫描电位在0～1.2 V（vs.Ag/Cl）时,分离效果明显。 本文采用差分脉冲伏安法,测定了CAT、RE和HQ的混合物,检出限依次为3.9×10-6、3.9×10-6和7.8×10-6 mol/L。 将该方法用于合成样品测定,其精密度和准确度均满足分析要求。     

安乃近在蒙脱土修饰电极上的电化学行为及测定

制备了蒙脱土修饰电极,并采用循环伏安法研究了安乃近在该电极上的电化学行为。结果表明,该电极过程是一受扩散控制的不可逆过程。用方波溶出伏安法优化了实验参数,测定了浓度与峰电流Ipa的线性关系,发现Ipa与安乃近浓度在2.0×10-6~8.0×10-5mol.L-1之间呈良好的线性关系,其线性回归方程为:Ipa(μA)=-0.07784-15443.54c(μmol.L-1),r=-0.9993,检出限可达1.12×10-6mol.L-1,回收率为94.0%~108.25%。该方法可用于药物中安乃近含量的测定。     

基于金胶的选择性聚集实现p53基因的电化学超灵敏检测

介绍了一种利用金胶的选择性聚集实现信号扩增的超灵敏的电化学方法, 用于人类p53肿瘤抑制剂基因的检测. 在实验中, 根据p53基因的序列设计了能特异性检测p53肿瘤抑制剂基因的二段探针, 在一段探针上固定磁性颗粒以捕获并富集目标基因, 同时在另一段探针上标记金纳米颗粒作为检测信标. 另外, 通过硫代三聚氰酸和金纳米颗粒的自组装作用, 形成金纳米颗粒和硫代三聚氰酸的网状结构, 获得金纳米颗粒的选择性聚集, 实现信号扩增. 用此法检测目标p53野生型DNA, 最低检测限为2.24×10-17 mol/L, 同时进一步研究了该探针对p53野生型和一碱基错配的突变型的选择性.     

A Novel Adsorptive Square Wave Voltammetric Method for Pico Molar Monitoring of Lorazepam at Gold Ultra Microelectrode in a Flow Injection System by Application of Fast Fourier Transform Analysis

Abstract

This paper describes development of a new analysis system for determination of lorazepam by a novel square wave voltammetry method to perform a very sensitive method. The method used for determination of lorazepam involves measuring the changes in admittance voltammogram of a gold ultramicroelectrode (in 0.05 M H₃PO₄ solution) caused by adsorption of the lorazepam on the electrode surface. Variation of admittance in the detection process is created by inhibition of oxidation reaction of the electrode surface, by adsorbed lorazepam. Furthermore, signal-to-noise ratio is significantly increased by application of discrete fast Fourier transform (FFT) method, background subtraction, and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work, some parameters such as SW frequency, eluent pH, and accumulation time were optimized. Calibration plots are given for solutions containing 10^?6–10^?11 M of lorazepam. The detection limit is calculated to be 6.0 × 10^?12 M (～ 2 pg/ml). The relative standard deviation at concentration 3.0 × 10^?8 M is 6.1% for 5 reported measurements.     

Electrochemical Behaviors of Baicalin at an Electrochemically Activated Glassy Carbon Electrode and Its Determination in Human Blood Serum

Electrochemical behavior of baicalin (BA) at an electrochemically activated glassy carbon electrode (GCE) had been investigated in Britton‐Robinson (B‐R) buffer solution (pH = 2.87) by cyclic voltammetry (CV) and square wave voltammetry (SWV). The experimental results suggested that the electrode exhibited an electrocatalytic activity toward the redox of BA. The electron transfer coefficient (α) and the standard rate constant (k_s) of BA at the electrochemically activated glassy carbon electrode were calculated. The reaction mechanism was proposed and discussed in this work. Under the selected conditions, the reduction peak current was linearly dependent on the concentration of BA in the range of 5.0 × 10^?8 to 3.0 × 10^?6 mol L^?1 (r = 0.9990), with a detection limit of 2.0 × 10^?8 mol L^?1. The relative standard deviation (R.S.D.) for five times successful determination of 1.0 × 10^?6 mol L^?1 baicalin were 2.9%. The proposed method was also successfully applied for the determination of BA in human blood serum.     

Gold Nanoparticles Modified Electrode for the Determination of an Antihypertensive Drug

The nature of binding between Terazosin (TR) and gold nanoparticles (Au‐Nps) is investigated using UV‐vis and fluorescence spectroscopies, cyclic voltammetry, SEM, and EIS. The results suggest that Au‐Nps are effective carriers for TR. An electrochemical sensor for TR is introduced using Au‐Nps electrodeposited on carbon paste electrode. The effect of parameters including pH and scan rate on the response was investigated. A linear range from 8.0×10^?9 to 5.4×10^?5 mol L^?1 with correlation coefficient of 0.9995 and detection limit of 1.2×10^?10 mol L^?1 was obtained. This sensor was used for determining TR spiked in urine, and excellent recovery results are achieved.     

A Highly Sensitive Sensor Based on Reduced Graphene Oxide,Carbon Nanotube and a Co(II) Complex Modified Carbon Paste Electrode: Simultaneous Determination of Isoprenaline,Captopril and Tryptophan

This paper describes the development of a reduced graphene oxide (RGO), carbon nanotube (CNT) and Co(II) complex (cobalt(II) bis (benzoylacetone) ethylenediimino) (CBE) modified carbon paste electrode (CPE) for simultaneous determination of isoprenaline (IP), captopril (CAP) and tryptophan (Try). A pair of well‐defined redox peaks of Co(II) complex were obtained through a direct electron transfer between the Co(II) complex and the CPE. The proposed sensor showed very efficient electrocatalytic activity for anodic oxidation of IP in a 0.1 M phosphate buffer solution (pH 7.0). Square wave voltammetry (SWV) exhibited two linear dynamic ranges of 0.125–30.0 µM and 30.0–300.0 µM for IP. The detection limit for IP was found to be 50 nM. The proposed sensor was successfully applied for the determination of IP in real samples such as human blood serum, urine and IP ampoule.     

Electrochemical Sensor Based on Gold Nanoparticles Stabilized in Poly(Allylamine hydrochloride) for Determination of Vanillin

Gold nanoparticles stabilized in poly(allylamine hydrochloride) (AuNP‐PAH) were synthesized, characterized and applied in the development of a new sensor for the determination of vanillin by square‐wave voltammetry. Under optimized conditions, the calibration curve showed a linear range for vanillin of 0.90 to 15.0 µmol L^?1, with a limit of detection of 55 nmol L^?1. The sensor demonstrated acceptable selectivity and stability, as well as good intra‐day and inter‐day repeatability and electrode‐to‐electrode repeatability (with relative standard deviations of 3.5, 4.5 and 3.9 %, respectively). The sensor was successfully applied in the determination of vanillin in different commercial samples.     

Electrochemical Behavior and Ultrasensitive,Simple and Effective Voltammetric Determination of Acetaminophen Using Modified Glassy Carbon Electrode Based on 4-Hydroxyquinoline-3-carboxylic Acid

An electrochemical oxidation of acetaminophen (ACOP) has been successfully performed by using glassy carbon electrode covered with 4-hydroxyquinoline-3-carboxylic acid (4HQ3CA) to reinforce electrode's feature. To characterize the modified electrode (4HQ3CA/GC), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and Fourier transform infrared spectroscopy (FT-IR) techniques were used. The finding optimum conditions (supporting electrolyte, pH) and the electrochemical determination studies were performed with differential pulse voltammetry (DPV). It was decided that the supporting electrolyte medium suitable for ACOP determination was Britton-Robinson (BR) buffer and the effect of pH change on the oxidation peak of ACOP in this media was investigated. The effect of changing scan rate on the oxidation peak of ACOP was examined and this study showed that the oxidation process of ACOP on the 4HQ3CA/GC modified electrode surface was diffusion and adsorption controlled process. A wide concentration range from 0.0025 μM to 141 μM with a limit of detection (LOD) of 5.98×10⁻¹⁰ M (3 s/m) was obtained. This prepared sensor was carried out for the determination of ACOP in pharmaceutical sample.     

双酚A在纳米金-离子液体复合修饰电极上的电化学行为及测定

该文制备了纳米金-离子液体修饰电极(GNP-[BMIM]PF6/GCE),用红外光谱对GNP和[BMIM]PF6进行了表征.采用交流阻抗法研究了GNP-[BMIM]PF6/GCE的表面电化学特性,同时研究了双酚A(BPA)在该修饰电极上的循环伏安行为.结果表明,BPA在该修饰电极上出现1个氧化峰,无还原峰,为不可逆电化...