On‐chip pressure generation using a gel membrane fabricated outside of the microfluidic network

On‐chip generation of pressure gradients via electrokinetic means can offer several advantages to microfluidic assay design and operation in a variety of applications. In this article, we describe a simple approach to realizing this capability by employing a polyacrylamide‐based gel structure fabricated within a fluid reservoir located at the terminating end of a microchannel. Application of an electric field across this membrane has been shown to block a majority of the electroosmotic flow generated within the open duct yielding a high pressure at the channel–membrane junction. Experiments show the realization of higher pressure‐driven velocities in an electric field‐free separation channel integrated to the micropump with this design compared to other similar micropumps described in the literature. In addition, the noted velocity was found to be less sensitive to the extent of Debye layer overlap in the channel network, and therefore more impressive when working with background electrolytes having higher ionic strengths. With the current system, pressure‐driven velocities up to 3.6 mm/s were realized in a 300‐nm‐deep separation channel applying a maximum voltage of 3 kV at a channel terminal. To demonstrate the separative performance of our device, a nanofluidic pressure‐driven ion‐chromatographic analysis was subsequently implemented that relied on the slower migration of cationic analytes relative to the neutral and anionic ones in the separation channel likely due to their strong electrostatic interaction with the channel surface charges. A mixture of amino acids was thus separated with resolutions greater than those reported by our group for a similar analysis previously.     

Circular‐shaped microfluidic device to study the effect of shear stress on cellular orientation

Understanding the effects of shear stress on mammalian cells is a crucial factor for understanding a number of biological processes and diseases. Here, we show the development of a circular‐shaped microfluidic device for the facile generation of shear stress gradients. With this microfluidic device, the effect of shear stress on orientation of human umbilical vein endothelial cells was studied. This microfluidic device, which enables to control the alignment of human umbilical vein endothelial cells within a microchannel, can be a valuable tool to mimic blood vessels.     

Rapid and inexpensive method for the simple fabrication of PDMS‐based electrochemical sensors for detection in microfluidic devices

The fabrication of PDMS microfluidic structures through soft lithography is widely reported. While this well‐established method gives high precision microstructures and has been successfully used for many researchers, it often requires sophisticated instrumentation and expensive materials such as clean room facilities and photoresists. Thus, we present here a simple protocol that allows the rapid molding of simple linear microchannels in PDMS substrates aiming microfluidics‐based applications. It might serve as an alternative to researchers that do not have access to sophisticated facilities such as clean rooms. The method developed here consists on the use of pencil graphite leads as template for the molding of PDMS channels. It yields structures that can be used for several applications, such as housing support for electrochemical sensors or channels for flow devices. Here, the microdevices produced through this protocol were employed for the accommodation of carbon black paste, which was utilized for the first time as amperometric sensor in microchip electrophoresis. This platform was successfully used for the separation and detection of model analytes. Ascorbic acid and iodide were separated within 45 s with peak resolution of 1.2 and sensitivities of 198 and 492 pA/μM, respectively. The background noise was ca. 84 pA. The analytical usefulness of the system developed was successfully tested through the quantification of iodide in commercial pharmaceutical formulations. It demonstrates good efficiency of the microfabrication protocol developed and enables its use for the easy and rapid prototyping of PDMS structures over a low fabrication cost.     

Investigation on the mechanical behavior of poly(2‐hydroxyethyl methacrylate) hydrogel membrane under compression in the assembly process of microfluidic system

A microfluidic system with an inserted membrane assembled using mechanical fastening process is described. The membrane is made of a biocompatible water swollen poly(2‐hydroxyethyl methacrylate) (PHEMA) hydrogel thin film as a sealing component. The hyperelastic characteristics of PHEMA membrane under the compression during fastening are investigated through numerical simulations, including strain and Von Mises stress distribution, and potential fracture in correlation with the microchannel's geometry and dimensions. To validate the modeling, the experiments have also been conducted to visualize the deformation induced in membrane and internal stress distribution using 3D optical measuring system. The results from this study have revealed the implications in connection with the mechanical behavior of the PHEMA membranes in the assembly of microfluidic system through mechanical fastening technique. This will ultimately assist to produce a guideline for the optimum design of microchannels in the uses of PHEMA membranes and associated assembly process. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 485–495     

Ionic liquids in enhancing the sensitivity of capillary electrophoresis: Off‐line and on‐line sample preconcentration techniques

The popularity of ionic liquids (ILs) has grown during the last decade in enhancing the sensitivity of CE through different off‐line or on‐line sample preconcentration techniques. Water‐insoluble ILs were commonly used in IL‐based liquid phase microextraction, in all its variants, as off‐line sample preconcentration techniques combined with CE. Water‐soluble ILs were rarely used in IL‐based aqueous two phase system (IL‐ATPS) as an off‐line sample preconcentration approach combined with CE in spite of IL‐ATPS predicted features such as more compatibility with CE sample injection due to its relatively low viscosity and more compatibility with CE running buffers avoid, in some cases, anion exchange precipitation. Therefore, the attentions for the key parameters affecting the performance of IL‐ATPSs were generally presented and discussed. On‐line CE preconcentration techniques containing IL‐based surfactants at nonmicellar or micellar concentrations have become another interesting area to improve CE sensitivity and it is likely to remain a focus of the field in the endeavor because of their numerous to create rapid, simple and sensitive systems. In this article, significant contributions of ILs in enhancing the sensitivity of CE are described, and a specific overview of the relevant examples of their applications is also given.     

Practical generation of 3,5‐dimethoxybenzyllithium: application to the synthesis of 5‐substituted‐resorcinols

Reductive lithiation of 3,5‐dimethoxybenzyl methyl ether was successfully performed with lithium wire and a catalytic amount of naphthalene in dry tetrahydrofuran at ?15°C, leading to the quantitative generation of 3,5‐dimethoxybenzyllithium. This organometallic compound, which can be stored for at least 24 h, was trapped with a variety of different electrophiles, including, besides aldehydes, non‐functionalized and functionalized alkyl halides and an epoxide. Accordingly, it is a useful intermediate in the synthesis of 5‐substituted natural and non‐natural resorcinols. Copyright © 2003 John Wiley & Sons, Ltd.     

Dried blood spot on‐card derivatization: an alternative form of sample handling to overcome the instability of thiorphan in biological matrix

Thiorphan, the active metabolite of racecadotril, can undergo oxidation in biological matrices such as blood and plasma. In bioanalysis, a general approach for the stabilization of such a molecule is to derivatize the thiol group to a more stable thioether, often requiring complex handling procedures at the clinical site. In this research, the concept of dried blood spot (DBS) on‐card derivatization was evaluated to stabilize thiorphan. DBS cards were in‐house pre‐treated with 2‐bromo‐3′‐methoxyacetophenone and left to dry prior to blood spotting. Thiorphan was shown to be effectively derivatized to thiorphan–methoxyacetophenone once applied on the in‐house pre‐treated cards. Thiorphan–methoxyacetophenone was extracted by soaking a 6 mm DBS punch in methanol containing the internal standard (thiorphan–methoxyacetophenone‐D₅). Chromatographic separation was achieved on a Waters XBridge C₁₈ column with a gradient elution of 5 m m NH₄HCO₃ and methanol in 2.5 min and detection by ESI(+)/MS/MS. A linear (weighted 1/x²) relationship was obtained over a concentration range of 5.00–600.00 ng/mL. The assay met regulatory guidelines acceptance criteria for sensitivity, selectivity, precision and accuracy, matrix effect, recovery, dilution integrity and multiple stability evaluations. The DBS on‐card derivatization has shown to be an easy and reliable alternative form of sample collection for the quantification of thiorphan. Copyright © 2012 John Wiley & Sons, Ltd.     

A new non-synchronous preparative counter-current centrifuge—the next generation of dynamic extraction/chromatography devices with independent mixing and settling control,which offer a step change in efficiency

A new and significantly more robust design of non-synchronous coil planet centrifuge is introduced where the degree of mixing between two immiscible phases can be changed independently from the “g” field required to separate out the phases. A hypothesis that an optimum ratio between the speed of the bobbin and the speed of the rotor can be found to optimise the efficiency of the separation for a given force field is upheld for an intermediate polarity phase system. This paves the way for extensive further research to find the optimum non-synchronous conditions for a range of different phase systems that are desirable for the separation of large molecules, proteins and biologics but can tend to emulsify in the standard “J” type centrifuge systems currently available and routinely in use for aqueous organic phase systems. A step change of up to 30% in resolution and 90% in plate efficiency is demonstrated.     

Automated headspace solid‐phase microextraction and on‐fiber derivatization for the determination of clenbuterol in meat products by gas chromatography coupled to mass spectrometry

A method was developed for the determination of clenbuterol in meat using stable‐isotope‐dilution gas chromatography with mass spectrometry coupled with solid‐phase microextraction and on‐fiber derivatization. The samples were first homogenized with hydrochloric acid followed by protein deposition. After headspace solid‐phase microextraction and on‐fiber derivatization, the content of clenbuterol was measured with the aid of stable‐isotope dilution. The condition of solid‐phase microextraction was optimized by central composite design. The relative standard deviations, limit of detection, and recoveries for clenbuterol were 4.2–9.2%, 0.48 μg/kg, and 96–104%, respectively. The proposed method was satisfactory for analysis of real samples as compared with the Chinese standard method.     

Perspective to the Potential Use of Graphene in Li‐Ion Battery and Supercapacitor

Graphene is a hot star in materials science with various potential application aspects, including in Li‐ion battery and supercapacitor. The burst of scientific papers in this area seems to validate the performance of graphene, but also arouses large dispute. Herein, we share our judgment of these trends to all, encouraging the discussion and enhancing the understanding of the structure‐performance relationship of graphene.     

Assessment of errors in the determination of Mark–Houwink–Sakurada and Stockmayer–Fixman constants using size‐exclusion chromatography with on‐line viscometric detection: Analyses of poly(p‐substituted styrenes) in tetrahydrofuran

In this work, we present values for the Mark–Houwink–Sakurada (MHS) and Stockmayer–Fixman (SF) constants for a series of homopolymers of para‐substituted styrenes (4‐X‐styrene; X = OCH₃, OCH₂CH₃, CH₃, F, Cl, and Br) in THF at room temperature. The respective values of K (in 10⁻⁵ dL/g) and α were: 0.685 and 13.2; 0.662 and 14.1; 0.740 and 8.41; 0.781 and 5.24; 0.726 and 8.95; 0.700 and 7.79. The respective values for K_θ (in 10⁻⁴ dL/g) and K' (in 10⁻⁷ dL/g) were: 6.01 and 16.1; 6.22 and 9.07; 7.64 and 17.4; 5.59 and 23.7; 6.29 and 17.3; 4.44 and 10.3. These constants were measured using size‐exclusion chromatography with on‐line viscometry. As part of this work, we investigate the applicability of common model fitting procedures to this method of measuring MHS/SF constants and the effect of uncertainties in their estimated values on the accuracy of molecular weight analysis. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2557–2570, 1999     

Challenges in the use of density functional theory to examine catalysis by M‐doped ceria surfaces

For CeO₂ or M‐doped CeO₂ catalysts, reliable energetics associated with surface reactivity requires accurate representation of oxidized and reduced metal states. Density functional theory (DFT) is used extensively for metals and metal oxides; however, for strongly correlated electron materials, conventional DFT fails to predict both qualitative and quantitative properties. This is the result of a localized electron self‐interaction error that is inherit to DFT. DFT+U has shown promise in correcting energetic errors due to the self‐interaction error, however, its transferability across processes relevant to surface catalysis remains unclear. Hybrid functionals, such as HSE06, can also be used to correct this self‐interaction error. These hybrid functionals are computationally intensive, and especially demanding for periodic surface slab models. This perspective details the challenges in representing the energetics of M‐doped ceria catalyzed processes and examines using DFT extensions to model the localized electronic properties. © 2013 Wiley Periodicals, Inc.     

The Dark Side of Hydrogen Bonds in the Design of Optical Materials: A Charge‐Density Perspective

A combined investigation of the structural, electronic, and optical properties of three crystalline nonaaqualanthanoid(III) triflates, [Ln(H₂O)₉(CF₃SO₃)₃], has provided unambiguous experimental evidence for charge redistribution in the first coordination sphere of a lanthanide ion as a result of hydrogen bonds with outer‐sphere anions. As well as resulting in charge transfer from the noncoordinated anions to the coordinated water molecules, these hydrogen bonds give rise to a new excited state, an hydrogen‐bond‐induced charge‐transfer state, which is observed experimentally for the first time. This state was shown to be responsible for the previously unknown negative aspect of hydrogen bonds with a lanthanide‐bound water molecule: rather than increasing the luminescence efficiency of the complex, they can lead to additional quenching that is unfavorable for the task‐specific design of optical materials.     

Performance of the OP correlation functional in relation to its formulation: Influence of the exchange component and the effect of incorporating same‐spin correlations

In the present study, we have investigated two significant features of the OP correlation functional, namely the incorporation of the exchange functional into itself, and the inclusion of only opposite‐spin (OS) effects. To explore the latter feature, we have compared OP with B95 and a new functional introduced in the present study – the OPB method that combines OP with the same‐spin (SS) component of B95. In general, we find that B95 and OPB perform comparably. Our comparisons of the various DFT procedures suggest that the incorporation of a meta‐GGA (e.g., TPSS) into OP and OPB does not necessarily lead to a chemically more accurate procedure than the use of a related GGA (e.g., PBE). An important finding is the more notable (and somewhat more consistent) improvement in performance with the incorporation of SS correlation, particularly for longer‐range chemical properties. Nonetheless, on average across our test sets of over 800 systems, the difference between the performances of OP versus B95 or OPB is not exceedingly large. By drawing a parallel between these DFT methods and the wavefunction scaled‐MP2‐type methods, we reason that one can further develop the OP functional, and perhaps a wider range of correlation functionals by combining it with the technique of range separation. © 2016 Wiley Periodicals, Inc.     

NMR study of the nanomorphology in thin films of polymer blends used in organic PV devices: MDMO‐PPV/PCBM

The disclosure of the nanomorphology of thin films in organic solar cells, prepared from blends of conjugated polymers and PCBM, is of key importance for a better understanding of the occurring photovoltaic (PV) mechanisms. Hereto solid‐state NMR relaxometry has been evaluated as a complementary technique to traditional microscopic techniques like atomic force microscopy and transmission electron microscopy. It is demonstrated that proton wide‐line solid‐state NMR relaxometry is a useful and innovative tool to study the phase morphology of blends used in semi‐conducting polymer based PV devices. Attention is focused on the influence of the blend composition and casting conditions on the resulting phase morphology. Two different casting techniques, i.e. spincoating and Doctor Blading, were compared. To demonstrate the applicability of NMR relaxometry in this field, MDMO‐PPV/PCBM blends where used, since these are known for their significant phase separation behavior in combination with toluene as solvent. In films prepared from blends in toluene with a PCBM content ≥70 wt %, a fraction of the PCBM is phase separated into crystalline domains, whereas the remaining part remains homogeneously mixed with the MDMO‐PPV. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 138–145, 2008     

A DFT study on Cu(I) coordination in Cu‐ZSM‐5: Effects of the functional choice and tuning of the ONIOM approach

The coordination of Cu⁺ at the T1 and T7 positions of the M7 ring of Cu‐ZSM‐5, and the interaction of NO with coordinated Cu⁺ were investigated by means of DFT/ONIOM calculations. The B3LYP, BLYP, PBE1PBE, PBE, M06, and M062X functionals with the def2‐TZVP (def2‐QZVP for Cu) basis set were used in the high‐level part of ONIOM calculations, with the HF/3‐21G, B3LYP/LANL2DZ, M06/LANL2DZ, and M062X/LANL2DZ methods in the low‐level part. The ability of suitable combinations of the above methods to reproduce (i) the crystallographic structure of purely siliceous ZSM‐5, (ii) the tendency of Cu⁺ to be twofold or fourfold coordinated by framework oxygen atoms of Cu‐ZSM‐5, and (iii) the interaction energy and the N? O stretching frequency of adsorbed nitrogen oxide are discussed, showing that different results are obtained depending on the adopted computational approach. With reference to above properties, some considerations about the employment of the ONIOM approximations are also included. © 2015 Wiley Periodicals, Inc.     

Density functional study of the relative reactivity in the concerted 1,3‐dipolar cycloaddition of nitrile ylide to disubstituted ethylenes

Density functional theory was used to perform a theoretical evaluation of (E)‐1,2‐disubstituted ethylenes as dipolarophiles for the 1,3‐dipolar cycloaddition reaction. The reactivities of electron‐withdrawing and ‐donating substituted ethylenes were examined by estimating their activation energies. The calculated activation energies predicted that the most reactive species is (E)‐1,2‐C₂H₂(NO)₂, whereas the least reactive is (E)‐2‐butene. Namely, it was demonstrated that 16‐electron 1,3‐dipole reactants with more electropositive substituents in terminal positions and ethylenes that possess more strongly electron‐withdrawing substituents facilitate 1,3‐dipolar cycloaddition reactions. All of the theoretical results can be rationalized using the configuration mixing model. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 83: 318–323, 2001     

Semi‐interpenetrating polymer networks based on polyurethane and polymethacrylate functional prepolymers: Morphology and mechanical properties in dependence of the concentration of functional groups

Grafted semi‐interpenetrating polymer networks (IPNs) were prepared from polyurethane (PU) prepolymers with polyester soft segments and hard segments containing carboxylic functional groups as well as polymethacrylate (PM) prepolymers with tertiary amine functional groups. The dependence of morphological and mechanical properties on the concentration of functional groups was studied. The enhanced miscibility of PU and PM prepolymers was observed at concentrations of functional groups of 0.25 mmol/g of polymer and above. Despite the improved miscibility, the PM prepolymers showed a tendency toward phase separation. Because the observed glass‐transition temperature shifts of PU prepolymers indicated substantial miscibility, we ascribed this phenomenon to the presence of methyl methacrylate rich sequences in the PM prepolymer. The observed changes in mechanical properties by increasing the content of functional groups were typical for ionomers. Young's modulus increased as a result of physical interactions between functional groups. A significant drop in tensile strength was observed in IPN samples with phase‐separated PU and PM prepolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 115–123, 2002     

Kinetics of radical‐molecule reactions in aqueous solution: A benchmark study of the performance of density functional methods

The performance of 18 density functional approximations has been tested for a very challenging task, the calculations of rate constants for radical‐molecule reactions in aqueous solution. Despite of the many difficulties involved in such an enterprise, six of them provide high quality results, and are recommended to that purpose. They are LC‐ωPBE, M06‐2X, BMK, B2PLYP, M05‐2X, and MN12SX, in that order. This trend was obtained using experimental data as reference. The other relevant aspects used in this benchmark are: (i) the SMD model for mimicking the solvent; (ii) the conventional transition state, the zero‐curvature tunneling correction, and the limit imposed by diffusion for the calculation of the rate constants. Even though changing any of these aspects might alter the trend in performance, at least, when using them, the aforementioned functionals can be successfully used to obtain high quality kinetic data for the kind of reactions investigated in this work. © 2014 Wiley Periodicals, Inc.