Novel hydrazone derivatives of 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde

The structures of new oxaindane spiropyrans derived from 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde (SP1), namely N‐benzyl‐2‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]hydrazinecarbothioamide, C₂₇H₂₅N₃O₃S, (I), at 120 (2) K, and N′‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]‐4‐methylbenzohydrazide acetone monosolvate, C₂₇H₂₄N₂O₄·C₃H₆O, (II), at 100 (2) K, are reported. The photochromically active C_spiro—O bond length in (I) is close to that in the parent compound (SP1), and in (II) it is shorter. In (I), centrosymmetric pairs of molecules are bound by two equivalent N—H...S hydrogen bonds, forming an eight‐membered ring with two donors and two acceptors.     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

Di‐μ2‐chlorido‐dichloridobis(dimethylformamide)tetrakis[μ3‐1‐(2‐oxidobenzoyl)‐2‐(2‐oxo‐2‐phenylethanethioyl)hydrazine‐1,2‐diido]octacopper(II) dimethylformamide disolvate

The title compound, [Cu₈(C₁₅H₁₀N₃O₃S)₄Cl₄(C₃H₇NO)₂]·2C₃H₇NO, consisting of eight Cu^II cations, four trianionic 1‐(2‐oxidobenzoyl)‐2‐(2‐oxo‐2‐phenylethanethioyl)hydrazine‐1,2‐diide ligands, four chloride ligands and two coordinated and two solvent dimethylformamide molecules, crystallizes with the octanuclear molecule located on an inversion centre. The two halves of the molecule are connected by two bridging Cl atoms. This is the first example of an octanuclear complex based on a thiosemicarbazone‐derived ligand.     

η4‐HBCC‐σ,π‐Borataallyl Complexes of Ruthenium Comprising an Agostic Interaction

Thermolysis of [Cp*Ru(PPh₂(CH₂)PPh₂)BH₂(L₂)] 1 (Cp*=η⁵‐C₅Me₅; L=C₇H₄NS₂), with terminal alkynes led to the formation of η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)B{R‐C=CH₂}(L)₂] ( 2 a – c ) and η²‐vinylborane complexes [Cp*Ru(R‐C=CH₂)BH(L)₂] ( 3 a – c ) ( 2 a , 3 a : R=Ph; 2 b , 3 b : R=COOCH₃; 2 c , 3 c : R=p‐CH₃‐C₆H₄; L=C₇H₄NS₂) through hydroboration reaction. Ruthenium and the HBCC unit of the vinylborane moiety in 2 a – c are linked by a unique η⁴‐interaction. Conversions of 1 into 3 a – c proceed through the formation of intermediates 2 a – c . Furthermore, in an attempt to expand the library of these novel complexes, chemistry of σ‐borane complex [Cp*RuCO(μ‐H)BH₂L] 4 (L=C₇H₄NS₂) was investigated with both internal and terminal alkynes. Interestingly, under photolytic conditions, 4 reacts with methyl propiolate to generate the η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)BH{R‐C=CH₂}(L)] 5 and [Cp*Ru(μ‐H)BH{HC=CH‐R}(L)] 6 (R=COOCH₃; L=C₇H₄NS₂) by Markovnikov and anti‐Markovnikov hydroboration. In an extension, photolysis of 4 in the presence of dimethyl acetylenedicarboxylate yielded η⁴‐σ,π‐borataallyl complex [Cp*Ru(μ‐H)BH{R‐C=CH‐R}(L)] 7 (R=COOCH₃; L=C₇H₄NS₂). An agostic interaction was also found to be present in 2 a – c and 5 – 7 , which is rare among the borataallyl complexes. All the new compounds have been characterized in solution by IR, ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry and the structural types were unequivocally established by crystallographic analysis of 2 b , 3 a – c and 5 – 7 . DFT calculations were performed to evaluate possible bonding and electronic structures of the new compounds.     

A novel three‐dimensional coordination polymer: poly[di‐μ3‐acetato‐di‐μ2‐acetato‐di‐μ3‐hydroxido‐octa‐μ3‐triazolato‐heptamanganese(II)]

The title compound, [Mn₇(C₂H₂N₃)₈(C₂H₃O₂)₄(OH)₂]_n, is composed of centrosymmetric heptanuclear building units with the central Mn atom on an inversion center. In the building block, three Mn^II ions are held together by one μ₃‐hydroxide group, two μ₂‐triazolate (trz) ligands and two μ₂‐acetate groups, forming an Mn₃ cluster. Two Mn₃ clusters are bridged by an Mn atom via two μ₂‐trz ligands and two μ₂‐O atoms from two acetate ions to construct a heptanuclear building block. The heptanuclear building units, lying parallel to each other along the b direction, form one‐dimensional ladder‐like chains and are further interlinked, resulting in a three‐dimensional framework through Mn—N_trz bonds.     

Lanthanoidkomplexe von 1‐(2‐Propenyl)‐ und 1‐(3‐Butenyl)‐1,4,7,10‐tetraazacyclododecan‐4,7,10‐triessigsäure

η³‐1,4,7,10‐tetraazacyclododecane molybdenum tricarbonyl reacts with allyl bromide and 3‐butenyl bromide in dimethylformamide in the presence of K₂CO₃ yielding 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane ( 1a ) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane ( 1b ), which on their part react with bromoacetic acid tert‐butyl ester in CH₃CN to give 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid tert‐butyl ester ( 2a ) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid tert‐butyl ester ( 2b ), respectively. Compounds 2a and 2b are converted into the corresponding acids 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid ( 4a ) (MPC) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid ( 4b ) (MBC) via the trifluoroacetates 3a and 3b . Sm(NO₃)₃(H₂O)₆, LuCl₃(THF)₃, and TmCl₃(H₂O)₆ react with 4a and 4b forming the lanthanide complexes Sm(MPC) ( 5 ), Lu(MPC) ( 6 ), Tm(MPC) ( 7a ) and Tm(MBC) ( 7b ). The IR as well as the ¹H and ¹³C NMR spectra of the new compounds are reported and discussed.     

Synthesis and Fungicidal Activity of (E)‐5‐[1‐(2‐Oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐4‐one Derivatives

The novel fungicidal agents, (E )‐5‐[1‐(2‐oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐ 4‐one derivatives, were designed and synthesized in moderate to excellent yields in four steps using α ‐hydroxyketone and diketene as raw materials and characterized by HR‐ESI‐MS , ¹H NMR and X‐ray diffraction. The preliminary bioassay showed that some of these compounds, such as 5e , 6a , 6e , and 7 h exhibit 87.8%, 91.3%, 89.9% and 87.8% inhibition rates against Sclerotinia scleotiorum , 3b , 3c , 4c and 7 h exhibit 96.4%, 92.5%, 90.3% and 76.9% inhibition rates against Phytophthora capsici at the concentration of 50 µg/mL , respectively. These compounds exhibited significant fungicidal activities against S. scleotiorum and P. capsici with EC₅₀ values of 2.56–11.60 µg/mL , and compounds 6e and 7 h exhibited weak inhibition against the spore germination of S. scleotiorum , while the spore germination of P. capsici was strongly inhibited by compound 7 h solution. Scanning electron microscopy (SEM ) and transmission electron microscopy (TEM ) observation indicated that compound 7 h had a significant impact on the structure and function of the hyphal cell wall of P. capsici mycelium.     

η5‐(3)‐1‐Methyl‐1,2‐dicarbollyl‐η5‐2′,5′‐dimethylpyrrolylcobalt(III)

In the title compound, (η⁵‐2,5‐di­methyl­pyrrolyl)[(7,8,9,10,11‐η)‐7‐methyl‐7,8‐dicarba‐nido‐undecaborato]­cobalt(III), [3‐Co{η⁵‐[2,5‐(CH₃)₂‐NC₄H₂]}‐1‐CH₃‐1,2‐C₂B₉H₁₀] or [Co(C₃H₁₃B₉)(C₆H₈N)], the Co^III atom is sandwiched between the pentagonal faces of the pyrrolyl and dicarbollide ligands, resulting in a neutral mol­ecule. The C—C distance in the dicarbollide cage is 1.649 (3) Å.     

4‐Aminopyridinium 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate monohydrate

The title compound, 2C₅H₇N₂⁺·2C₂₃H₁₃O₂⁻·H₂O, formed as a by‐product in the attempted synthesis of a nonlinear optical candidate molecule, contains two independent 4‐aminopyridinium cations and 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate anions with one solvent water molecule. This is the first reported structure containing these anions. The two anions are not planar, having different interplanar angles between the anthracenyl and inden‐1‐olate moieties of 59.07 (5) and 83.92 (5)°. The crystal packing, which involves strong classical hydrogen bonds and one C—H...π interaction, appears to account for both the nonplanarity and this difference.     

Three‐dimensional networks in 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate

The two title proton‐transfer compounds, 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate, C₄H₇N₂⁺·C₇H₅O₆S⁻, (I), and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate, 2C₄H₇N₂⁺·C₇H₅O₆S²⁻, (II), are each organized into a three‐dimensional network by a combination of X—H...O (X = O, N or C) hydrogen bonds, and π–π and C—H...π interactions.     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile, C₁₅H₁₀N₂S, (I), and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile, C₂₆H₂₄N₂S, (II), were prepared by base‐catalyzed reactions of the corresponding indole‐3‐carbox­aldehyde with thio­phene‐3‐aceto­nitrile. ¹H/¹³C NMR spectral data and X‐ray crystal structures of compounds (I) and (II) are presented. The olefinic bond connecting the indole and thio­phene moieties has Z geometry in both cases, and the mol­ecules crystallize in space groups P2₁/c and C2/c for (I) and (II), respectively. Slight thienyl ring‐flip disorder (ca 5.6%) was observed and modeled for (I).     

catena‐Poly[[tetra­kis(μ‐propionato‐κ2O:O′)dicopper(II)]‐μ‐3‐pyridylmethanol‐κ2N:O‐[bis­(propionato‐κO)bis­(3‐pyridylmethanol‐κN)copper(II)]‐μ‐3‐pyridylmethanol‐κO:N]

The title compound, [Cu₃(C₃H₅O₂)₆(C₆H₇NO)₄]_n, is composed of polymeric chains formed by alternating centrosymmetric Cu₂(μ‐CH₃CH₂CO₂)₄ and Cu(C₃H₅O₂)₂(C₆H₇NO)₂ units. These elemental units are linked by two bridging 3‐pyridylmethanol (3PM) ligands. The Cu₂(μ‐CH₃CH₂CO₂)₄ group presents a centrosymmetric tetra­bridged structure with four syn–syn bridging propionate ligands to which two 3PM mol­ecules are bonded (through N), occupying the apical positions of each square‐pyramidal polyhedron around the Cu^II ions. The remaining mononuclear group is centred around a third Cu^II ion, which lies on a symmetry centre and is bound to two monodentate propionate groups (through O), two monodentate 3PM mol­ecules (through N) and two bridging 3PM mol­ecules (through O), thus completing a square‐bipyramidal CuO₂N₂O₂ coordination.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

From α‐carbamoyl‐α‐cyano­oxiranes to 3‐halogenopyruv­amides

The crystal structures of the first stable α‐diol from the α‐halogenopyruv­amide series, 3‐chloro‐2,2‐di­hydroxy‐3‐phenyl­propan­amide, C₉H₁₀­ClNO₃, and three products [3‐(4‐chloro­phenyl)‐2‐cyano‐2,3‐epoxy­propan­amide, C₁₀H₇­ClN₂O₂, 3‐bromo‐2‐cyano‐2‐hydroxy‐3‐p‐tolyl­propan­amide, C₁₁H₁₁Br­N₂O₂, 3‐bromo‐2‐oxo‐3‐p‐tolyl­propan­amide, C₁₀H₁₀­BrNO₂] obtained during the systematic synthesis of α‐halogenopyruv­amides are reported. The crystal structures are dominated by hydrogen bonds involving an amide group. The stability of the geminal diol could be ascribed to hydrogen bonds which involve both hydroxyl groups.     

Enzyme‐Mediated Preparation of (+)‐ and (−)‐β‐Irone and (+)‐ and (−)‐cis‐γ‐Irone from Irone alpha®

The (−)‐ and (+)‐β‐irones ((−)‐ and (+)‐ 2 , resp.), contaminated with ca. 7 – 9% of the (+)‐ and (−)‐trans‐α‐isomer, respectively, were obtained from racemic α‐irone via the 2,6‐trans‐epoxide (±)‐ 4 (Scheme 2). Relevant steps in the sequence were the LiAlH₄ reduction of the latter, to provide the diastereoisomeric‐4,5‐dihydro‐5‐hydroxy‐trans‐α‐irols (±)‐ 6 and (±)‐ 7 , resolved into the enantiomers by lipase‐PS‐mediated acetylation with vinyl acetate. The enantiomerically pure allylic acetate esters (+)‐ and (−)‐ 8 and (+)‐ and (−)‐ 9 , upon treatment with POCl₃/pyridine, were converted to the β‐irol acetate derivatives (+)‐ and (−)‐ 10 , and (+)‐ and (−)‐ 11 , respectively, eventually providing the desired ketones (+)‐ and (−)‐ 2 by base hydrolysis and MnO₂ oxidation. The 2,6‐cis‐epoxide (±)‐ 5 provided the 4,5‐dihydro‐4‐hydroxy‐cis‐α‐irols (±)‐ 13 and (±)‐ 14 in a 3 : 1 mixture with the isomeric 5‐hydroxy derivatives (±)‐ 15 and (±)‐ 16 on hydride treatment (Scheme 1). The POCl₃/pyridine treatment of the enantiomerically pure allylic acetate esters, obtained by enzymic resolution of (±)‐ 13 and (±)‐ 14 , provided enantiomerically pure cis‐α‐irol acetate esters, from which ketones (+)‐ and (−)‐ 22 were prepared (Scheme 4). The same materials were obtained from the (9S) alcohols (+)‐ 13 and (−)‐ 14 , treated first with MnO₂, then with POCl₃/pyridine (Scheme 4). Conversely, the dehydration with POCl₃/pyridine of the enantiomerically pure 2,6‐cis‐5‐hydroxy derivatives obtained from (±)‐ 15 and (±)‐ 16 gave rise to a mixture in which the γ‐irol acetates 25a and 25b and 26a and 26b prevailed over the α‐ and β‐isomers (Scheme 5). The (+)‐ and (−)‐cis‐γ‐irones ((+)‐ and (−)‐ 3 , resp.) were obtained from the latter mixture by a sequence involving as the key step the photochemical isomerization of the α‐double bond to the γ‐double bond. External panel olfactory evaluation assigned to (+)‐β‐irone ((+)‐ 2 ) and to (−)‐cis‐γ‐irone ((−)‐ 3 ) the strongest character and the possibility to be used as dry‐down note.     

Hydrogen bonding and π–π stacking in methyl­aminium 4′,7‐dihydroxy­isoflavone‐3′‐sulfonate dihydrate and hexa­aqua­iron(II) bis­(4′,7‐diethoxy­isoflavone‐3′‐sulfonate) tetra­hydrate

In methyl­aminium 4′,7‐dihydroxy­isoflavone‐3′‐sulfonate dihydrate, CH₆N⁺·C₁₅H₉O₇S⁻·2H₂O, 11 hydrogen bonds exist between the methyl­aminium cations, the iso­flavone‐3′‐sulfonate anions and the solvent water mol­ecules. In hexa­aqua­iron(II) bis­(4′,7‐diethoxy­isoflavone‐3′‐sulfonate) tetra­hydrate, [Fe(H₂O)₆](C₁₉H₁₇O₇S)₂·4H₂O, 12 hydrogen bonds exist between the centrosymmetric [Fe(H₂O)₆]²⁺ cation, the isoflavone‐3′‐sulfonate anions and the solvent water mol­ecules. Additional π–π stacking inter­actions generate three‐dimensional supramolecular structures in both compounds.     

Functionalization of Quinazolin‐4‐ones Part 1: Synthesis of Novel 7‐Substituted‐2‐thioxo Quinazolin‐4‐ones from 4‐Substituted‐2‐Aminobenzoic Acids and PPh3(SCN)2

4‐(Nitro, amino, acetylamino)‐2‐aminobenzoic acid were allowed to react with PPh₃(SCN)₂ and gave the crossholding 7‐nitro, 7‐acetylamino‐ and 7‐amino‐2‐thioxo quinazolin‐4‐ones respectively. The nature of the substituent at position 4 of the 2‐aminobenzoic acids has significant influence on the outcome of the cyclisation reaction with PPh₃(SCN)₂. Similarly, the nature of the substituent at position 7 of the 2‐substituted quinazolin‐4‐ones significantly affected the ease with which alkylation reactions could be performed. The alkylation selectivity of the 7‐ substiuted‐2‐thioxo quinazolin‐4‐ones was found to depend on the nature of the alkyl halide and the nature of the substituent at position 2.     

Poly[di‐μ‐aqua‐[μ6‐N‐(4‐bromophenylsulfonyl)dithiocarbimato]dipotassium] and poly[di‐μ‐aqua‐[μ4‐N‐(4‐iodophenylsulfonyl)dithiocarbimato]dipotassium]

The rigid organic linkers N‐(4‐bromophenylsulfonyl)dithiocarbimate(2−) and N‐(4‐iodophenylsulfonyl)dithiocarbimate(2−) crystallize with two potassium cations and two water molecules in their asymmetric units, forming the title coordination polymers, [K₂(C₇H₄BrNO₂S₃)(H₂O)₂]_n and [K₂(C₇H₄INO₂S₃)(H₂O)₂]_n. The anions and the water molecules link the potassium cations into broad two‐dimensional networks, which are further linked by K...halide interactions.     

Hydrogen bonding in two ammonium salts of 5‐sulfosalicylic acid: ammonium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate and triammonium 3‐carboxy‐4‐hydroxybenzenesulfonate 3‐carboxylato‐4‐hydroxybenzenesulfonate

The structures of two ammonium salts of 3‐carboxy‐4‐hydroxybenzenesulfonic acid (5‐sulfosalicylic acid, 5‐SSA) have been determined at 200 K. In the 1:1 hydrated salt, ammonium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate, NH₄⁺·C₇H₅O₆S⁻·H₂O, (I), the 5‐SSA⁻ monoanions give two types of head‐to‐tail laterally linked cyclic hydrogen‐bonding associations, both with graph‐set R₄⁴(20). The first involves both carboxylic acid O—H...O_water and water O—H...O_sulfonate hydrogen bonds at one end, and ammonium N—H...O_sulfonate and N—H...O_carboxy hydrogen bonds at the other. The second association is centrosymmetric, with end linkages through water O—H...O_sulfonate hydrogen bonds. These conjoined units form stacks down c and are extended into a three‐dimensional framework structure through N—H...O and water O—H...O hydrogen bonds to sulfonate O‐atom acceptors. Anhydrous triammonium 3‐carboxy‐4‐hydroxybenzenesulfonate 3‐carboxylato‐4‐hydroxybenzenesulfonate, 3NH₄⁺·C₇H₄O₆S²⁻·C₇H₅O₆S⁻, (II), is unusual, having both dianionic 5‐SSA²⁻ and monoanionic 5‐SSA⁻ species. These are linked by a carboxylic acid O—H...O hydrogen bond and, together with the three ammonium cations (two on general sites and the third comprising two independent half‐cations lying on crystallographic twofold rotation axes), give a pseudo‐centrosymmetric asymmetric unit. Cation–anion hydrogen bonding within this layered unit involves a cyclic R₃³(8) association which, together with extensive peripheral N—H...O hydrogen bonding involving both sulfonate and carboxy/carboxylate acceptors, gives a three‐dimensional framework structure. This work further demonstrates the utility of the 5‐SSA⁻ monoanion for the generation of stable hydrogen‐bonded crystalline materials, and provides the structure of a dianionic 5‐SSA²⁻ species of which there are only a few examples in the crystallographic literature.