Organometallic complexes with biological molecules. XIV. Biological activity of dialkyl and trialkyltin(IV) [meso‐tetra(4‐carboxy‐ phenyl)porphinate] derivatives

The effects of several organotin(IV) meso‐tetra(4‐carboxyphenyl)porphinate] derivatives with the general formula (R₂Sn)₂TPPC and (R₃Sn)₄TPPC (R = Me, Bu, Ph) were tested in vivo on ascidian embryonic development. Embryos at the two‐cell stage were incubated in 1 × 10⁻⁵ or 1 × 10⁻⁷ M solutions of various compounds. The ligand, [meso‐tetra(4‐carboxyphenyl)porphine] (H₄TPPC) was toxic at 1 × 10⁻⁵ M , because development was blocked at an early gastrula stage, whereas 1 × 10⁻⁷ M H₄TPPC allowed the eggs to develop up to the larva stage. The most toxic among the tested compounds was tributyltin(IV) [meso‐tetra(4‐carboxyphenyl)porphinate], (Bu₃Sn)₄TPPC, since the fertilized eggs were unable to divide into two cells, even at a concentration of 1 × 10⁻⁷ M . To correlate this embryonic arrest with the metabolic pathway, and especially to understand why cellular organelles first underwent chemical damage, 10⁻⁵ and 10⁻⁷ M (Bu₃Sn)₄TPPC‐cultured fertilized eggs were tested for DNA, RNA, protein, glucose, lipid and ATP contents, comparing the values obtained with those of control culture fertilized egg contents. The higher concentration (1 × 10⁻⁵ M ) reduced the content of all the tested compounds, but the lower one (1 × 10⁻⁷ M ), even if still unable to allow cleavage, reduced only the lipids and the ATP contents. A hypothesis concerning initial damage to mitochondrial membrane is proposed. Copyright © 2000 John Wiley & Sons, Ltd.     

A Novel Molecularly Imprinted Photoelectrochemical Sensor Based on g‐C3N4‐AuNPs for the Highly Sensitive and Selective Detection of Triclosan

A novel molecularly imprinted polymer (MIP) photoelectrochemical sensor was fabricated for the highly sensitive and selective detection of triclosan. The MIP photoelectrochemical sensor was fabricated using graphite‐like carbon nitride (g‐C₃N₄) and gold nanoparticles (AuNPs) as photoelectric materials. The MIP/g‐C₃N₄‐AuNPs sensor used photocurrent as the detection signal and was triggered by ultraviolet light (UV‐Light 365 nm). g‐C₃N₄‐AuNPs was immobilized on indium tin oxide electrodes to produce the photoelectrochemically responsive electrode of the MIP/g‐C₃N₄‐AuNPs sensor. A MIP layer of poly‐o‐phenylenediamine was electropolymerized on the g‐C₃N₄‐AuNPs‐modified electrode to act as the recognition element of the MIP/g‐C₃N₄‐AuNPs sensor and to enable the selective adsorption of triclosan to the sensor through specific binding. Under optimal experimental conditions, the designed MIP/g‐C₃N₄‐AuNPs sensor presented high sensitivity for triclosan with a linear range of 2×10⁻¹² to 8×10⁻¹⁰ M and a limit of detection of 6.01×10⁻¹³ M. Moreover, the MIP/g‐C₃N₄‐AuNPs sensor showed excellent selectivity. The sensor had been successfully applied in the analysis of toothpaste samples.     

Investigation of Silver(I) Ion Sensing Property of Ruthenium(II) Thiosemicarbazone Complex Using Coated Graphite and Polymeric Membrane Electrodes

A ruthenium(II) complex [Ru(PPh₃)₂(pytsc)₂] {Hpytsc = pyridine‐2‐carbaldehydethiosemicarbazone, (C₅H₅N)C²(H)=N³‐N²(H)‐C¹(=S)N¹H} has been used as an ion carrier for the selective determination of silver(I) ions in solution. Silver(I) ion‐selective coated graphite based (CGE) and PVC polymeric membrane based (PME) electrodes exhibit Nernstian slope for silver(I) ions over a wide concentration range from 1.0 × 10⁻¹ M to 5.0 × 10⁻⁶ M (with CGE) and 1.0 × 10⁻¹ M to 2.0 × 10⁻⁵ M (with PME). The working pH range of these electrodes has been found to be from 1.2 to 7.2 for CGE and 2.2 to 6.5 for PME. The proposed CGE sensor exhibits better analytical features like sensitivity and selectivity towards different secondary ions in comparison to the corresponding PME with no interference from mercury(II) ions . These electrodes also act as indicator electrodes in potentiometric titration and have been successfully used for the determination of silver content in solution of real samples (1 gm dissolved in 100 mL of dilute nitric acid) such as silver ornaments and thin silver foils. Silver content determined by the use of ion selective electrode was found to vary in the concentration range from 1.20 x 10⁻² M to 7.45 x 10⁻² M and results were found to be comparable with those obtained from the traditional volumetric method of analysis. It is the first report of a metal‐ligand complex used as an ion carrier in ion selective electrode, which is selective for a metal ion other than the one used in the complex.     

The Electropolymerization of 2,6‐Diaminopyridine and Its Application as Mercury Ion Selective Electrode

A composite graphite (CG) electrode modified with poly(2,6‐diaminopyridine) (PDAP) was used as solid state‐ion selective electrode for determination of mercury. The electrooxidation of monomer 2, 6 diaminopyridine (DAP) onto CG was accomplished from the 30 mM DAP in 5% H₂SO₄ and 0.5 M ZnSO₄. The electrode displayed Nernstian response with slope of 28.4±1 mV decade⁻¹ in concentration range of 1×10⁻⁶ to 1×10⁻¹ M and in solution of pH 3–5. The limit of detection for electrode was 3×10⁻⁸ M with response time of 25 s. The electrode was also suitable as an indicator electrode in the potentiometric titration of Hg²⁺ with iodide.     

Nonenzymatic H2O2 Electrochemical Sensor Based on SnO2‐NPs Coated Polyethylenimine Functionalized Graphene

This paper demonstrated using polyethylenimine (PEI)‐functionalized graphene (Gr) incorporating tin oxide (SnO₂) hybrid nanocomposite as a platform for nonenzymatic H₂O₂ electrochemical sensor. The results of UV‐vis spectroscopy and X‐ray diffraction (XRD) confirmed the simultaneous formation of tin oxide (SnO₂) nanocomposite and reduction of graphene oxide (GO). Transmission electron microscopy (TEM) images showed a uniform distribution of nanometer‐sized tin oxide nanoparticles on the grapheme sheets, which could be achieved using stannous chloride (SnCl₂) complex instead of tin oxide as precursor. The electrochemical measurements, including cyclic voltammetry (CV) and amperometric performance (I‐t), showed that the PEI‐functionalized Gr supported SnO₂ (SnO₂‐PEI‐Gr) exhibited an excellent electrocatalytic activity toward the H₂O₂. The corresponding calibration curve of the current response showed a linear detection range of 9×10⁻⁶∼1.64×10⁻³ mol L⁻¹, while the limit of detection was estimated to be 1×10⁻⁶ mol L⁻¹. Electrochemical studies indicated that SnO₂ and functionalized Gr worked synergistically for the detection of H₂O₂.     

Supramolecular association in proton‐transfer adducts containing benzamidinium cations. I. Four molecular salts with uracil derivatives

Four organic salts, namely benzamidinidium orotate (2,6‐dioxo‐1,2,3,6‐tetrahydropyrimidine‐4‐carboxylate) hemihydrate, C₇H₉N₂⁺·C₅H₃N₂O₄⁻·0.5H₂O (BenzamH⁺·Or⁻), (I), benzamidinium isoorotate (2,4‐dioxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carboxylate) trihydrate, C₇H₉N₂⁺·C₅H₃N₂O₄⁻·3H₂O (BenzamH⁺·Isor⁻), (II), benzamidinium diliturate (5‐nitro‐2,6‐dioxo‐1,2,3,6‐tetrahydropyrimidin‐4‐olate) dihydrate, C₇H₉N₂⁺·C₄H₂N₃O₅⁻·2H₂O (BenzamH⁺·Dil⁻), (III), and benzamidinium 5‐nitrouracilate (5‐nitro‐2,4‐dioxo‐1,2,3,4‐tetrahydropyrimidin‐1‐ide), C₇H₉N₂⁺·C₄H₂N₃O₄⁻ (BenzamH⁺·Nit⁻), (IV), have been synthesized by a reaction between benzamidine (benzenecarboximidamide or Benzam) and the appropriate carboxylic acid. Proton transfer occurs to the benzamidine imino N atom. In all four acid–base adducts, the asymmetric unit consists of one tautomeric aminooxo anion (Or⁻, Isor⁻, Dil⁻ and Nit⁻) and one monoprotonated benzamidinium cation (BenzamH⁺), plus one‐half (which lies across a twofold axis), three and two solvent water molecules in (I), (II) and (III), respectively. Due to the presence of protonated benzamidine, these acid–base complexes form supramolecular synthons characterized by N⁺—H...O⁻ and N⁺—H...N⁻ (±)‐charge‐assisted hydrogen bonds (CAHB).     

A 2D cadmium metal–organic framework: Synthesis,structure and luminescence sensing for chromate,permanganate, cupric,silver and ferric

A multi-responsive Cd metal–organic framework {[Cd (ttpe)(H₂O)(ip)]•4H₂O•DMAC}_n ( 1•4H ₂ O•DMAC ) was synthesized using hydrothermal method (ttpe = 1,1,2,2-tetra(4-(1H-1,2,4-triazol-1-yl)phenyl)ethylene, ip = isophthalate, DMAC = N,N-dimethylacetamide), and characterized. 1 exhibits a 2D (4,4) network. The luminescent sensing experimrnts showed that 1•4H ₂ O•DMAC as a new MOF luminescent sensor can detect Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ in aqueous solution with simultaneously high efficiency and high sensitivity. The quenching constants K_sv for Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ are 4.231 × 10⁴ M⁻¹, 2.471 × 10⁴ M⁻¹, 6.459 × 10³ M⁻¹, 7.617 × 10³ M⁻¹, 1.563 × 10⁴ M⁻¹ and 3.574 × 10⁴ M⁻¹, respectively. The detection limits are 0.094 μM for Cr₂O₇²⁻, 0.108 μM for CrO₄^{2 −} , 0.346 μM for MnO₄⁻, 0.302 μM for Cu²⁺, 0.221 μM for Ag ⁺ , and 0.100 μM for Fe³⁺. 1•4H ₂ O•DMAC exhibits high photocatalytic efficiency for degradation of methylene blue under visible light irradiation.     

Sensitive and Selective Sensing of Hydrogen Peroxide with Iron‐Tetrasulfophthalocyanine‐Graphene‐Nafion Modified Screen‐Printed Electrode

We developed a novel iron‐tetrasulfophthalocyanine‐graphene‐Nafion (FeTSPc‐GR‐Nafion) modified screen‐printed electrode to determine hydrogen peroxide (H₂O₂) with high sensitivity and selectivity. The nanocomposite film (FeTSPc‐GR‐Nafion) exhibits an excellent electrocatalytic activity towards oxidation of H₂O₂ at a potential of +0.35 V in the absence of enzyme. A comparative study reveals that the FeTSPc‐GR complexes play a dual amplification role. Amperometric experiment indicates that the sensors possess good sensitivity and selectivity, with a linear range from 2.0×10^?7 M to 5.0×10^?3 M and a detection limit of 8.0×10^?8 M. This sensor has been successfully used to develop the glucose biosensor and has also been applied to determine H₂O₂ in sterile water.     

Analytical Biosensing of Hydrogen Peroxide on Brilliant Cresyl Blue/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrode

A cationic quinine‐imide dye brilliant cresyl blue (BCB) and horseradish peroxidase (HRP) were co‐immobilized within ormosil on multiwalled carbon nanotubes modified glassy carbon electrode for the fabrication of highly sensitive and selective hydrogen peroxide biosensor. The presence of epoxy group in ormosil as organic moiety improves the mechanical strength and transparency of the film and amino group provides biocompatible microenvironment for the immobilization of enzyme. The presence of MWCNTs improved the conductivity of the nanocomposite film. The surface characterization of MWCNT modified ormosil nanocomposite film was performed with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Cyclic voltammetry and amperometry measurements were used to study and optimize the performance of the resulting peroxide biosensor. The apparent Michaelis–Menten constant was determined to be 1.5 mM. The proposed H₂O₂ biosensor exhibited wide linear range from 3×10^?7 to 1×10^?4 M, and low detection limit 1×10^?7 M (S/N=3) with fast response time <5 s. The probable interferences in bio‐matrix were selected to test the selectivity and no significant response was observed in the biosensor. This biosensor possessed good analytical performance and long term storage stability.     

Electrochemical behaviors and determination of melamine in neutral and acid aqueous media

The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH 7.0) and 0.5 M H₂SO₄. Various methods including UV–vis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1 M PBS (pH 7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5 M H₂SO₄, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234 nm are linearly increasing in a same concentration range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ M in 0.5 M H₂SO₄ (determination limit, 1 × 10⁻⁸ and 3 × 10⁻⁸ (3σ)). The proposed method was successfully applied to the determination of MEL in real sample.

     

On‐line Liquid‐liquid Extraction Coupled to a Reversed Micellar‐mediated Chemiluminescence Detection System: Application to the Determination of Amino/Nitroaromatic Compounds

A simple and fast flow method for the trace level determination of p‐toluidine, 2‐methyl‐5‐nitroaniline, and 2,4‐dinitroaniline in aqueous samples is reported. These amino/nitroaromatics are related to trinitrotoluene (TNT) and appear during the degradation process of the explosive. The chemical principles of ion‐pair formation and liquid‐liquid extraction are applied: In aqueous acidic medium, the protonated analyte [HA]⁺ makes an ion‐pair with the tetrachloroaurate(III) ion, followed by on‐line ion‐pair extraction into the dichloromethane carrier used. After membrane separation, the CH₂Cl₂ containing the ion‐pair, [HA]⁺[AuCl₄]⁻, is mixed with the reversed micellar luminescent reagent of luminol (in 0.3 M Na₂CO₃) prepared from cetyl‐trimethylammonium chloride in CH₂Cl₂‐cyclohexane and the [AuCl₄⁻‐luminol chemiluminescence (CL) output is recorded. The detection limits (S/N> 3) are: p‐toluidine, 1.0 × 10⁻⁴M; 2‐methyl‐5‐nitroaniline, 1.0 × 10⁻⁷ M; 2,4‐dinitroaniline, 1.0 × 10⁻⁷ M, while the calibration curves are linear between 1.0 × 10⁻⁴ — 1.0 × 10⁻² M for all the compounds. Although spectral studies indicated the formation and extraction of a very small amount of the ion‐pair species, the reversed micellar‐mediated CL detection system provides an alternative procedure for the determination of degradation products of the explosive TNT in environmental aqueous samples.     

Eight salt forms of sulfadiazine

Proton transfer to the sulfa drug sulfadiazine [systematic name: 4‐amino‐N‐(pyrimidin‐2‐yl)benzenesulfonamide] gave eight salt forms. These are the monohydrate and methanol hemisolvate forms of the chloride (2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium chloride monohydrate, C₁₀H₁₁N₄O₂S⁺·Cl⁻·H₂O, (I), and 2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium chloride methanol hemisolvate, C₁₀H₁₁N₄O₂S⁺·Cl⁻·0.5CH₃OH, (II)); a bromide monohydrate (2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium bromide monohydrate, C₁₀H₁₁N₄O₂S⁺·Br⁻·H₂O, (III)), which has a disordered water channel; a species containing the unusual tetraiodide dianion [bis(2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium) tetraiodide, 2C₁₀H₁₁N₄O₂S⁺·I₄²⁻, (IV)], where the [I₄]²⁻ ion is located at a crystallographic inversion centre; a tetrafluoroborate monohydrate (2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium tetrafluoroborate monohydrate, C₁₀H₁₁N₄O₂S⁺·BF₄⁻·H₂O, (V)); a nitrate (2‐{[(4‐azaniumylphenyl)sulfonyl]azanidyl}pyrimidin‐1‐ium nitrate, C₁₀H₁₁N₄O₂S⁺·NO₃⁻, (VI)); an ethanesulfonate {4‐[(pyrimidin‐2‐yl)sulfamoyl]anilinium ethanesulfonate, C₁₀H₁₁N₄O₂S⁺·C₂H₅SO₃⁻, (VII)}; and a dihydrate of the 4‐hydroxybenzenesulfonate {4‐[(pyrimidin‐2‐yl)sulfamoyl]anilinium 4‐hydroxybenzenesulfonate dihydrate, C₁₀H₁₁N₄O₂S⁺·HOC₆H₄SO₃⁻·2H₂O, (VIII)}. All these structures feature alternate layers of cations and of anions where any solvent is associated with the anion layers. The two sulfonate salts are protonated at the aniline N atom and the amide N atom of sulfadiazine, a tautomeric form of the sulfadiazine cation that has not been crystallographically described before. All the other salt forms are instead protonated at the aniline group and on one N atom of the pyrimidine ring. Whilst all eight species are based upon hydrogen‐bonded centrosymetric dimers with graph set R₂²(8), the two sulfonate structures also differ in that these dimers do not link into one‐dimensional chains of cations through NH₃‐to‐SO₂ hydrogen‐bonding interactions, whilst the other six species do. The chloride methanol hemisolvate and the tetraiodide are isostructural and a packing analysis of the cation positions shows that the chloride monohydrate structure is also closely related to these.     

Kinetic study and UV–Vis spectra of 1:2 complexation of free base para‐substituted meso‐tetraphenylporphyrins with trimethylsilyl chloride

The UV–Vis spectra for 1:2 complexation of four different para‐substituted meso‐tetraphenylporphyrin (H₂t(4‐X)pp) and meso‐tetraphenylporphyrins (H₂tpp) with trimethylsilyl chloride (TMSC) displayed large and different redshifts (28–32.4 nm) of Soret and (15–41.7 nm) Q_(0‐0) bands, whereas 1:2 complexation of the less flexible tetramesitylporphyrin (H₂tmp) with TMSC led to rather small redshift (24.8 nm) of the Soret band and blueshift (−7.4 nm) of the Q_(0‐0) band. The varying spectral behavior for the porphyrins complexation seems to essentially reflect the different extent of π‐interactions between the meso‐aryl groups and the presumably saddled porphyrin macrocycle, through their relative coplanarity. The observed order of the rate constants for the complexation of various para‐substituted porphyrins, H₂t(4‐OCH₃)pp (9.27 ± 0.03) × 10⁻³ > H₂t(4‐CH₃)pp (6.68 ± 0.05) × 10⁻³ > H₂tpp (3.2 ± 0.05) × 10⁻³ > H₂t(4‐Cl)pp (8.36 ± 0.06) × 10⁻⁴, clearly demonstrated a higher reaction rate for the porphyrins containing para‐substituents with stronger electron donor ability. The calculated order for porphyrins (0.9 ± 0.1) and for TMSC (1.0 ± 0.1) suggests rate = K[Por][TMSC] for the complexation. Attempts were made to explain the absence of spectral evidence for the presence of an intermediate 1:1 (TMSC) Por adduct in terms of its high reactivity and/or relative instability. © 2007 Wiley Periodicals, Inc. 39: 231–235, 2007     

Enhanced third‐order nonlinear optical properties determined in thin films using the Z‐scan technique: bis(μ‐4,4′‐oxydibenzoato)bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine)cobalt(II)]

π‐Conjugated organic materials exhibit high and tunable nonlinear optical (NLO) properties, and fast response times. 4′‐Phenyl‐2,2′:6′,2′′‐terpyridine (PTP) is an important N‐heterocyclic ligand involving π‐conjugated systems, however, studies concerning the third‐order NLO properties of terpyridine transition metal complexes are limited. The title binuclear terpyridine Co^II complex, bis(μ‐4,4′‐oxydibenzoato)‐κ³O,O′:O′′;κ³O′′:O,O′‐bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)cobalt(II)], [Co₂(C₁₄H₈O₅)₂(C₂₁H₁₅N₃)₂], (1), has been synthesized under hydrothermal conditions. In the crystal structure, each Co^II cation is surrounded by three N atoms of a PTP ligand and three O atoms, two from a bidentate and one from a symmetry‐related monodentate 4,4′‐oxydibenzoate (ODA²⁻) ligand, completing a distorted octahedral coordination geometry. Neighbouring [Co(PTP)]²⁺ units are bridged by ODA²⁻ ligands to form a ring‐like structure. The third‐order nonlinear optical (NLO) properties of (1) and PTP were determined in thin films using the Z‐scan technique. The title compound shows a strong third‐order NLO saturable absorption (SA), while PTP exhibits a third‐order NLO reverse saturable absorption (RSA). The absorptive coefficient β of (1) is −37.3 × 10⁻⁷ m W⁻¹, which is larger than that (8.96 × 10⁻⁷ m W⁻¹) of PTP. The third‐order NLO susceptibility χ⁽³⁾ values are calculated as 6.01 × 10⁻⁸ e.s.u. for (1) and 1.44 × 10⁻⁸ e.s.u. for PTP.     

Novel materials from bis(arene)metal‐containing polyacrylonitrile

Novel bis(arene)metal‐containing polyacrylonitrile materials have been prepared by the polycyanoethylation reaction between acrylonitrile and (arene)₂M (M = Cr or V; arene = PhH, C₆H₄Et₂ or mesitylene) in the absence of solvent. The resulting star‐shaped molecules consist of a central (arene)₂M species with up to four polyacrylonitrile arms covalently bonded to the arene ligands. The materials are readily soluble and films can be cast from solutions in acetonitrile. The IR and solid state ¹³C NMR spectra (or EPR spectrum for the oxidized chromium‐containing polymer) are consistent with the presence of a metal–arene bond and confirm the persistence of the sandwich structure. The properties of the thermolysed materials are consistent with the formation of conjugated naphthyridine‐type structures. The value of |n₂| determined by the degenerate four‐wave mixing technique at 1064 nm with a 6 ns pulse duration for a solution in conc. H₂SO₄ (1 g l⁻¹) of the chromium‐containing polymer pyrolysed at 350 °C was found to be 0.8 × 10⁻¹³ cm² W⁻¹ corresponding to |lRe _χ⁽³⁾| = 0.4 × 10⁻¹¹ esu.     

Kinetics and products of propargyl (C3H3) radical self‐reactions and propargyl‐methyl cross‐combination reactions

Propargyl (HCC CH₂) and methyl radicals were produced through the 193‐nm excimer laser photolysis of mixtures of C₃H₃Cl/He and CH₃N₂CH₃/He, respectively. Gas chromatographic and mass spectrometric (GC/MS) product analyses were employed to characterize and quantify the major reaction products. The rate constants for propargyl radical self‐reactions and propargyl‐methyl cross‐combination reactions were determined through kinetic modeling and comparative rate determination methods. The major products of the propargyl radical combination reaction, at room temperature and total pressure of about 6.7 kPa (50 Torr) consisted of three C₆H₆ isomers with 1,5‐hexadiyne(CHC CH₂ CH₂ CCH, about 60%); 1,2‐hexadiene‐5yne (CH₂CC CH₂ CCH, about 25%); and a third isomer of C₆H₆ (∼15%), which has not yet been, with certainty, identified as being the major products. The rate constant determination in the propargyl‐methyl mixed radical system yielded a value of (4.0 ± 0.4) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for propargyl radical combination reactions and a rate constant of (1.5 ± 0.3) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ for propargyl‐methyl cross‐combination reactions. The products of the methyl‐propargyl cross‐combination reactions were two isomers of C₄H₆, 1‐butyne (about 60%) and 1,2‐butadiene (about 40%). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 118–124, 2000     

A Hydrogen Peroxide Biosensor Based on Room Temperature Ionic Liquid Functionalized Graphene Modified Carbon Ceramic Electrode

A room temperature ionic liquid (IL) 1‐butyl‐3‐methylimidazolium hexafluorophosphate functionalized graphene (GE) was prepared and a hydrogen peroxide (H₂O₂) biosensor was fabricated by immobilizing hemoglobin (Hb) into the IL‐GE composite film. UV‐visible and Fourier transform infrared spectra of the composite film indicated that Hb retained its native structure in the film. Electrochemical investigation of the biosensor showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa=?0.209 V and E_pc= ?0.302 V (vs. SCE) in pH 7.0 phosphate buffer solution at the scan rate of 100 mV/s. To the reduction of H₂O₂, the biosensor had a good linear range from 8.0×10^?7 to 1.8×10^?4 mol/L with a detection limit of 3.0×10^?7 mol/L. The apparent Michaelis‐Menten constant K^app_M was estimated to be 3.4×10^?5 mol/L.     

Quenching of I(2P½) by R-OH compounds. Influence of the alkyl group on the quenching efficiency

The deactivation of I(²P_½) by R-OH compounds (R = H, C_nH_2n+1) was studied using time-resolved atomic absorption at 206.2 nm. The second-order quenching rate constants determined for H₂O, CH₃OH, C₂H₅OH, n-C₃H₇OH, i-C₃H₇OH, n-C₄H₉OH, i-C₄H₉OH, s-C₄H₉OH, t-C₄H₉OH, are respectively, 2.4 ± 0.3 × 10⁻¹², 5.5 ± 0.8 × 10⁻¹², 8 ± 1 × 10⁻¹², 10 ± 1 × 10⁻¹², 10 ± 1 × 10⁻¹², 11.1 ± 0.9 × 10⁻¹², 9.8 ± 0.9 × 10⁻¹², 7.1 ± 0.7 × 10⁻¹², and 4.1 ± 0.4× 10⁻¹² cm³ molec⁻¹ s⁻¹ at room temperature. It is believed that a quasi-resonant electronic to vibrational energy transfer mechanism accounts for most of the features of the quenching process. The influence of the alkyl group and its role in the total quenching rate is also discussed. © 1997 John Wiley & Sons, Inc.     

Enzyme Immobilization and Direct Electrochemistry Based on a New Matrix of Phospholipid‐Monolayer‐Functionalized Graphene

A new nanocomposite material for enzyme immobilization and subsequent direct electrochemistry and electrocatalysis was developed by using 1,2‐dimyristoyl‐sn‐glycero‐3‐phospho‐(1‐rac‐glycerol)‐phospholipid‐monolayer‐membrane‐modified graphene (DMPG‐G). Microperoxidase‐11 (MP11) was chosen as a model enzyme to investigate the composite system. Owing to the improved conductivity and biocompatible microenvironment, MP11 that was immobilized in the matrix of the DMPG‐G nanocomposite (DMPG‐G‐MP11) effectively retained its native structure and bioactivity. DMPG‐G‐MP11‐modified glassy carbon electrode (DMPG‐G‐MP11/GCE) exhibited a pair of well‐defined quasi‐reversible redox peaks of MP11 and showed high electrocatalytic activity towards hydrogen peroxide (H₂O₂). The linear response of the developed biosensor for the determination of H₂O₂ ranged from 2.0×10^?6 to 4.5×10^?4 M with a detection limit of 7.2×10^?7 M . This biosensor exhibited high reproducibility and long‐term storage stability. The promising features of this biosensor indicate that these lipid–graphene nanocomposites are ideal candidate materials for the direct electrochemistry of redox proteins and that they could serve as a versatile platform for the construction of a third‐generation biosensor.     

Nonenzymatic Hydrogen Peroxide Electrochemical Sensor Based on Au‐HS/SO3H‐PMO (Et) Nanocomposite

A newly nonenzymatic sensor for hydrogen peroxide (H₂O₂) based on the (Au‐HS/SO₃H‐PMO (Et)) nanocomposite is demonstrated. The electrochemical properties of the as‐prepared nanocomposite were studied. It displayed an excellent performance towards H₂O₂ sensing in the linear response range from 0.20 µM to 4.30 mM (R=0.9999) with a sensitivity of 6.35×10² µA µM^?1 cm^?2 and a low detection limit of 0.0499 µM. Furthermore, it was not affected by electroactive interference species. These features proved that the modified electrode was suitable for determination of H₂O₂.