Preparation of phenolic microspheres in water/“water” system

Phenolic microspheres were obtained by condensation of resorcinol and formaldehyde via a novel water/“water” suspension polymerization (WWSP) system, which was proposed and constructed for the first time. Resorcinol/formaldehyde aqueous solutions, ammonium sulfate aqueous solution, hydroxyethyl cellulose (HEC), and sodium hydroxyl were employed as water phase, “water” phase, stabilizer for protecting colloid, and catalyst, respectively. Stable and perfect phenolic microspheres were prepared in this special WWSP system. Particle sizes, size distribution, as well as morphology of microspheres were investigated by scanning electron microscope and computerized image analysis program. The results showed that particle size increased from 0.38 to 2.22 µm along with the increase of concentration of ammonium sulfate in “water” phase from 1.5% to 12.5% and the ratio of resorcinol to formaldehyde from 1:1.5 to 1:4. On the contrary, the particle size decreased from 1.80 to 0.30 µm with the increase of the amount of HEC from 0.1 to 1.0 g and amount of catalyst from 0.05 to 0.2 g. The polydispersity index value of the resulting microspheres is quite narrow, ranging from 1.01 to 1.30, which meant that the morphology of phenolic microspheres was unique. Copyright © 2011 John Wiley & Sons, Ltd.     

Photo‐initiated thiol–ene “click” hydrogels from RAFT‐synthesized poly(N‐isopropylacrylamide)

Despite the efficiency and robustness of the widely used copper‐catalyzed 1,3‐dipolar cycloaddition reaction, the use of copper as a catalyst is often not attractive, particularly for materials intended for biological systems. The use of photo‐initiated thiol‐ene as an alternative “click” reaction to synthesize “model networks” is investigated here. Poly(N‐isopropylacrylamide) precursors were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and were designed to have trithiocarbonate moieties as end groups. This structure design provides opportunity for subsequent end‐group modifications in preparation for thiol‐ene “click.” Two reaction routes have been proposed and studied to yield thiol and ene moieties. The advantages and disadvantages of each reaction path were investigated to propose a simple but efficient route to prepare copper‐free “click” hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4626–4636     

On the “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory”

After having reviewed some pioneer integral approximations closely related to Rüdenberg's expansions of one‐ and two‐electron orbital products, we apply the previously described “Implicit Multi‐Center Integration” techniques on Roothaan's “restricted” Fock‐matrix components over standard atomic orbital bases. The resulting compact forms are very similar to the well‐known “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory,” which relates the various off‐diagonal matrix elements of “restricted” Fock‐type to their corresponding diagonal counterparts. In this way, a “nonempirical Extended‐Hückel Theory” can be created. © 2012 Wiley Periodicals, Inc.     

Facile synthesis of polyester dendrimer via combining thio‐bromo “Click” chemistry and ATNRC

This article reports on developing an efficient synthesis approach to aliphatic polyester dendrimer, poly(thioglycerol‐2‐propionate) (PTP), by combination of thio‐bromo “Click” chemistry with atom transfer nitroxide radical coupling (ATNRC). Through the one‐pot two‐step method, linear polystyrene with hydroxyl end groups (l‐PS‐2OH) was obtained by first atom transfer radical polymerization of styrene and following termination using 4‐(2,3‐dihydroxypropoxy)‐TEMPO (DHP‐TEMPO) to capture the PS macroradicals via ATNRC method. Using l‐PS‐2OH as support, the dendritic repeating units divergently were grown from the hydroxyl end groups via esterification and thio‐bromo “Click” reaction two‐step process. In every generation, the resulting intermediates l‐PS‐d‐PTP (G1‐G4) can be easily isolated from the excessive unreacted monomers by simple precipitation in ethanol without help of time, labor and solvent consuming column chromatographic purification. At last, cleavage of the alkoxyamine group between the PS support and dendrimer at elevated temperature (125 °C) provided the targeted polyester dendrimer PTP up to the fourth generation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1762–1768     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Interpreting geometric preferences in π‐stacking interactions through molecular orbital analysis

The preference of π‐stacking interactions for parallel‐displaced (PD) and twisted (TW) conformations over the fully eclipsed sandwich (S) in small π‐stacked dimers of benzene, pyridine, pyrimidine, 1,3,5‐trifluorobenzene, and hexafluorobenzene are examined in terms of enhancement of the inter‐ring density through mixing of the monomer orbitals (MOs). PD and/or TW conformations are consistent with a non‐zero “stack bond order” (SBO), defined in analogy to the bond order of conventional MO theory, as the difference in the occupation of bonding and antibonding π‐type dimer MOs. In the S conformation, the equal number of bonding and antibonding MOs cancel overall stack bonding character between the monomers for an SBO of zero and an overall repulsive interaction. PD from the S shifts the character of at least one antibonding combination of monomer π‐type MOs with nodes perpendicular to the coordinate for PD to bonding, leading to an attractive nonzero SBO. The inter‐ring density measured through the Wiberg bond index analysis shows an enhancement at the PD conformations consistent with greater interpenetration of the monomer densities. This intuitive bonding model for π‐stacking interactions is complementary to highly accurate calculations of π‐stacking energies and allows a predictive understanding of relative stability using cheaper quantum chemical methods.     

Synthesis and functionalization of dendron‐polymer conjugate based hydrogels via sequential thiol‐ene “click” reactions

Fabrication and functionalization of hydrogels from well‐defined dendron‐polymer‐dendron conjugates is accomplished using sequential radical thiol‐ene “click” reactions. The dendron‐polymer conjugates were synthesized using an azide‐alkyne “click” reaction of alkene‐containing polyester dendrons bearing an alkyne group at their focal point with linear poly(ethylene glycol)‐bisazides. Thiol‐ene “click” reaction was used for crosslinking these alkene functionalized dendron‐polymer conjugates using a tetrathiol‐based crosslinker to provide clear and transparent hydrogels. Hydrogels with residual alkene groups at crosslinking sites were obtained by tuning the alkene‐thiol stoichiometry. The residual alkene groups allow efficient postfunctionalization of these hydrogel matrices with thiol‐containing molecules via a subsequent radical thiol‐ene reaction. The photochemical nature of radical thiol‐ene reaction was exploited to fabricate micropatterned hydrogels. Tunability of functionalization of these hydrogels, by varying dendron generation and polymer chain length was demonstrated by conjugation of a thiol‐containing fluorescent dye. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 926–934     

Synthesis of a Novel Oligoaniline: “Dumbbell‐Shaped” Oligoaniline

Summary: A new kind of aniline oligomer with a “dumbbell” shape was synthesized through a simple oxidative coupling reaction with a new rigid aromatic amine as starting material. The oligomer was characterized with mass spectrometry, IR and NMR spectroscopies. Its redox property was checked by cyclic voltammetry and chemical oxidation/reduction process was monitored by UV spectroscopy. We found it has a reversible electrochemical property like common oligoanilines. Combined with its well‐defined structure, it is expected to act as a model compound for a molecular electronic switch.

The “dumbbell‐shaped” oligoaniline compound synthesized here.     

Synthesis of ω‐phosphonated poly(ethylene oxide)s through the combination of kabachnik–fields reaction and “click” chemistry

The synthesis of new ω‐phosphonic acid‐terminated poly(ethylene oxide) (PEOs) monomethyl ethers was investigated by the combination of Atherton–Todd or Kabachnik–Fields reactions and the “click” copper‐catalyzed 1,3‐dipolar cycloaddition of azides and terminal alkynes. The Atherton–Todd route fails to give the corresponding phosphonic acid‐terminated PEOs due to competitive cleavage of the P? N bond during the dealkylation step. In contrast, the Kabachnik–Fields route leads with very good yields to ω‐phosphonic acid‐PEO through “click” reaction of azido‐PEO onto dimethyl aminopropargyl phosphonate prepared by Kabachnik–Fields reaction between propargylbenzylimine and dimethyl phosphonate, followed by acidic hydrolysis. The reported methodology, precluding the use of anionic polymerization of ethylene oxide, leads to novel well‐defined phosphonic acid‐terminated PEOs from commercially available products in good yields. Moreover, such a strategy can be adapted to anchor phosphonic acid functionality onto a wide range of polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cyclic alkoxyamine‐initiator tethered by azide/alkyne‐“click”‐chemistry enabling ring‐expansion vinyl polymerization providing macrocyclic polymers

A cyclic initiator for the nitroxide‐mediated controlled radical polymerization (NMP) is a powerful tool for the preparation of macrocyclic polymers via a ring‐expansion vinyl polymerization mechanism. For this purpose, we prepared a Hawker‐type NMP‐initiator that includes an azide and a terminal alkyne as an acyclic precursor, which is subsequently tethered via an intramolecular azide/alkyne‐“click”‐reaction, producing the final cyclic NMP‐initiator. The polymerization reactions of styrene with cyclic initiator were demonstrated and the resultant polymers were characterized by the gel permeation chromatography (GPC) and the matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). These results prove that the ring‐expansion polymerization of styrene occurred together with the radical ring‐crossover reactions originating from the exchange of the inherent nitroxides generating macrocyclic polystyrenes with higher expanded rings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3402–3416, 2010     

“Bottom‐Up” Fabrication of BODIPY‐Functionalized Fluorescent Hyperbranched Glycopolymers for Hepatoma‐Targeted Imaging

A novel type of multivalent and highly specific fluorescent hyperbranched glycopolymers h‐P(GalEA‐co‐VBPT‐co‐BYMA) (hPGVB) is designed and prepared successfully via a facile “bottom‐up” strategy. The acetylated hPGVB is prepared by one‐pot reversible addition‐fragmentation chain transfer (RAFT) copolymerization of acrylate‐type galactose monomers AcGalEA and methacrylate‐type fluorescent monomers BYMA in presence of an inimer‐type RAFT chain transfer agent. After deacetylation, the resulting amphiphilic hPGVB can self‐assemble into stable nanoparticles in aqueous media, showing strong green fluorescence with relative high quantum yields and good photostability. The cell viability study indicates the excellent biocompatibility of the hPGVB fluorescent nanoparticles (FNPs) against HepG2 and NIH3T3 cells. More importantly, comparing with the galactose‐free fluorescent hyperbranched polymers h‐P(OEGMA‐co‐VBPT‐co‐BYMA), hPEVB FNPs can be selectively internalized by asialoglycoprotein (ASGP) receptor‐rich HepG2 cells, indicating their potential application in the bioimaging fields.     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A “quasi‐flexible” automatic docking processing for studying stereoselective recognition mechanisms. Part I. Protocol validation

The main purpose of this work is the development and validation of a general scheme based on a systematic and automatic “quasi‐flexible” docking approach for studying stereoselective recognition mechanisms. To achieve our goals we explore the conformational and configurational space for small‐ or medium‐size flexible molecules in a systematic way, seeking a method that is both reasonably accurate and relatively fast from the computational point of view. In particular, we have developed a general computational protocol for the global molecular interaction evaluation (“Glob‐MolInE”) to efficiently explore the orientational and conformational space of flexible selectors and selectands used in modern chiral high‐performance liquid chromatography (HPLC); the enantioselective binding of the selector (S)‐N‐(3,5‐dinitrobenzoyl)‐leucine‐ n‐propylamide (S)‐ 1 towards the selectand N‐(2‐naphthyl)‐alanine methyl ester 2 has been studied; the global minimum obtained for the homochiral associate [S( 1 )/S( 2 )] (Pop. >99%) is very close (RMS≃0.20) to the crystallographically determined structure. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 515–530, 2000     

Azide/Alkyne‐“Click”‐Reactions of Encapsulated Reagents: Toward Self‐Healing Materials

The successful encapsulation of reactive components for the azide/alkyne‐“click”‐reaction is reported featuring for the first time the use of a liquid polymer as reactive component. A liquid, azido‐telechelic three‐arm star poly(isobutylene) ( = 3900 g · mol⁻¹) as well as trivalent alkynes were encapsulated into micron‐sized capsules and embedded into a polymer‐matrix (high‐molecular weight poly(isobutylene), = 250 000 g · mol⁻¹). Using (Cu^IBr(PPh₃)₃) as catalyst for the azide/alkyne‐“click”‐reaction, crosslinking of the two components at 40 °C is observed within 380 min and as fast as 10 min at 80 °C. Significant recovery of the tensile storage modulus was observed in a material containing 10 wt.‐% and accordingly 5 wt.‐% capsules including the reactive components within 5 d at room temperature, thus proving a new concept for materials with self‐healing properties.

     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008