Determination of Sudan dyes in chili pepper powder by online solid‐phase extraction with a butyl methacrylate monolithic column coupled to liquid chromatography with tandem mass spectrometry

A poly(butyl methacrylate‐co‐ethylene dimethacrylate) monolithic column was fabricated and used as a novel sorbent for online solid‐phase extraction coupled to liquid chromatography with tandem mass spectrometry for the simultaneous determination of Sudan I–IV in chili pepper powder. The prepared columns were characterized by scanning electron microscopy, nitrogen adsorption‐desorption, and pressure drop measurements. Online solid‐phase extraction was performed on the synthesized monolithic column using 10 mM ammonium acetate solution as the loading solution with the aid of an online cleanup chromatography system. The desorption of Sudan I–IV was achieved with acetonitrile as the eluting solution at the flow rate of 0.5 mL/min. The extracted analytes were subsequently eluted into a C₁₈ analytical column for chromatographic separation using a mixture of 10% acetonitrile/90% formic acid (0.5%) solution as the mobile phase. Under the optimized conditions, the developed method had linear range of 1.0–50 μg/kg, a detection limit of 0.3 μg/kg, and a quantification limit of 1.0 μg/kg for each analyte. The intraday and interday recoveries of Sudan I–IV in chili pepper powder samples ranged from 94.8 to 100.9% and 94.9 to 99.4%, respectively. The intraday and interday precision were between 3.37–7.01% and 5.01–7.68%, respectively.     

Perhydroxylcucurbit[6]uril as a highly selective gas chromatographic stationary phase for analytes of wide‐ranging polarity

This work describes the separation performance of a perhydroxylcucurbit[6]uril stationary phase for capillary gas chromatography. The perhydroxylcucurbit[6]uril stationary phase exhibits higher resolving capabilities for critical analytes with better peak shapes than cucurbit[6]uril and conventional stationary phases. The advantageous separation feature of the perhydroxylcucurbit[6]uril stationary phase may originate from its unique structure and favorably balanced interactions with the analytes. Also, the perhydroxylcucurbit[6]uril column shows good separation repeatability with relative standard deviations in the range of 0.01–0.13% for intraday, 0.37–0.82% for interday, and 1.0–4.7% for column‐to‐column repeatability.     

Enantioselective determination of acaricide etoxazole in orange pulp,peel, and whole orange by chiral liquid chromatography with tandem mass spectrometry

An efficient enantioselective method for the determination of etoxazole in orange pulp, peel, and whole orange was developed using liquid chromatography with tandem mass spectrometry. The enantioseparation was performed on a Chiralpak AD‐3R column at 30ºC using acetonitrile with 0.1% formic acid solution (80:20, v/v) as the mobile phase in less than 5 min. Quantification was achieved using matrix‐matched standard calibration curves. The overall mean recoveries for two enantiomers from orange pulp and whole orange were 91.0–99.6% and the orange peel was 92.6–103.1%, with relative standard deviations of 0.8–5.4% intraday and 2.0–4.8% interday at 1, 10, and 100 μg/kg levels, and 1.3–5.2% intraday and 3.5–4.3% interday at 5, 50, and 500 μg/kg levels, respectively. The limits of quantification for all enantiomers in three matrices did not exceed 5 μg/kg. Moreover, the absolute configuration of etoxazole enantiomers had been determined by the combination of experimental and predicted electronic circular dichroism spectra, and the first eluted enantiomer was confirmed as (S)‐etoxazole on a Chiralpak AD‐3R column while (R)‐etoxazole was first on three cellulose chiral columns. The application of the proposed method to real sample analysis suggests its potential use in enantioselective determination of etoxazole enantiomers in citrus.     

Turn‐On Fluorescence Sensor Based on Single‐Walled‐Carbon‐Nanohorn–Peptide Complex for the Detection of Thrombin

Proteases play a central role in several widespread diseases. Thus, there is a great need for the fast and sensitive detection of various proteolytic enzymes. Herein, we have developed a carbon nanotube (CNT)‐based protease biosensing platform that uses peptides as a fluorescence probe for the first time. Single‐walled carbon nanohorns (SWCNHs) and thrombin were used to demonstrate this detection strategy. SWCNHs can adsorb a fluorescein‐based dye (FAM)‐labeled peptide (FAM‐pep) and quench the fluorescence of FAM. In contrast, thrombin can cleave FAM‐pep on SWCNHs and recover the fluorescence of FAM, which allows the sensitive detection of thrombin. This biosensor has a high sensitivity and selectivity toward thrombin, with a detection limit of 100 pM .     

Evaluation of the performance of single‐walled carbon nanohorns in capillary electrophoresis

This paper describes for the first time the use of single‐walled carbon nanohorns (SWNHs) as pseudostationary and stationary phases for EKC and CEC, respectively, taking advantage of their characteristic features, such as conical‐end termination, formation of spherical assemblies dahlia‐flower like superstructure and easy functionalization. The use of SWNHs as pseudostationary phase for EKC required the study of their dispersion in different surfactants as well as their compatibility with the electrophoretic system. The carboxylation and subsequent immobilization of carboxylated SWNHs in fused‐silica capillary to obtain useful, reproducible and stable stationary phases for CEC has also been investigated, with promising results. The electrophoretic separations obtained for water‐soluble vitamins in both modalities (EKC and CEC) have been systematically compared with those obtained with single‐walled carbon nanotubes.     

Preparation of restricted‐access material precolumns by grafting δ‐gluconolactone onto a hybrid silica monolithic column for on‐line solid‐phase extraction of tetracycline residues from milk

A restricted‐access material–hybrid monolithic column was prepared based on single‐component organosiloxane and dynamic grafting of δ‐gluconolactone for on‐line solid phase extraction of tetracycline antibiotic residues from milk. The hybrid monolithic column was prepared in a stainless‐steel chromatographic column using methyltrimethoxysilane as the single precursor. δ‐Gluconolactone was covalently coupled to aminopropyl derivatized hybrid monolithic column, which formed hydrophilic structures on the surface of the pore of the restricted‐access material–hybrid monolithic column. The columns were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, nitrogen adsorption, contact angle analysis, dynamic adsorption, and chromatographic performance evaluation. The restricted‐access material–hybrid monolithic column was applied to the on‐line extraction of tetracycline residues from milk. An enrichment factor of 15.8 and a good sample clean‐up effect were obtained under the optimized conditions. The recoveries of the three spiked milk samples were between 81.7 and 102.5% with relative standard deviations (n = 3) in the range of 2–5%. The limits of detection (S/N = 3) for target compounds were in the range of 3.80–9.03 μg/kg. The results show that the on‐line extraction using the restricted‐access material–hybrid monolithic column was powerful for food sample pretreatment with high selectivity and good clean‐up effect.     

A high‐throughput screening method for determination of multi‐antibiotics in animal feed

A high‐throughput method based on ultrasonic‐assisted extraction, 96‐well plate thin‐film microextraction was established to determinate 18 antibiotics in animal feed. In this method, the extraction was implemented by ultrasonic‐assisted extraction for 30 min with disodium ethylenediaminetetraacetic acid‐McIlvaine buffer (pH 5) containing 6% sodium chloride w/v, purified by thin‐film microextraction and combined with 96‐well plate system to improve the efficiency. Optimization of thin‐film microextraction conditions was performed by methods of single factor and response surface, and finalized as: condition time: 20 min; adsorption time: 55 min; washing time: 5 s with water; desorption time: 30 min with acetonitrile/water (8:2, v/v) containing 0.1% formic acid v/v. Evaluation of different extractive phases showed that polystyrene‐divinylbenzene‐polyacrylonitrile was the optimum coating. The analysis was performed by ultra‐high performance liquid chromatography with tandem mass spectrometry. Recovery, inter‐ and intraday precision, linearity, limit of detection, and quantitation were evaluated. The average recoveries of 18 antibiotics were 66.6–93.5% at three spiked levels, intraday precision was 1–8.4%, and interday precision was 3.0–16.4%. The linearity was good for r² > 0.99. Limits of detection and quantification were found in the range of 1–14 and 4–48 µg/kg, respectively.     

Preparation of a polymer monolith modified with delaminated layered double hydroxides for the microextraction of β‐agonists

In the present study, a novel poly(acrylamide‐co‐N‐isopropylacrylamide‐co‐ethylene dimethacrylate) monolithic column modified with saline‐modified delaminated layered double hydroxides was developed and exploited as the stationary phase in the polymer monolith microextraction of β‐agonists. Transmission electron microscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray photoelectron spectroscopy, and thermal gravimetric analysis with derivative thermogravimetric determination were employed to characterize the monoliths. By coupling with high‐performance liquid chromatography determinations, extraction parameters affecting the extraction efficiency, including sample volume, flow rate, sample pH, eluent volume, and eluent flow rate were investigated with an orthogonal experiment design, L₁₆ (4⁵). Results demonstrated that under the optimal experimental conditions, low limits of detection in the range of 0.025–0.280 ng/mL were obtained with relative standard deviations in the range of 4.3–7.6% (intraday) and 6.7–8.8% (interday). When the developed method was applied to the analysis of β‐agonists in pork samples, recovery values were obtained in the range of 80.5−108.6%.     

Preparation of monolithic fibers for the solid‐phase microextraction of chlorophenols in water samples

Monolithic fibers were synthesized and applied for the solid‐phase microextraction and determination of chlorophenols in environmental water samples by coupling with HPLC. The fibers were prepared by copolymerization of vinylimidazole and ethylene dimethacrylate as functional monomer and cross‐linker, respectively. The effect of the preparation conditions of monolithic fibers on the extraction efficiencies was investigated in detail. Several characteristic techniques, such as elemental analysis, infrared spectroscopy, mercury‐intrusion porosimetry, and SEM were used to characterize the monolithic material. The effect of the extraction parameters, including desorption solvent, extraction and desorption time, pH values, and ionic strength in sample matrix on the extraction performance was investigated thoroughly. Under the improved extraction conditions, the linear ranges of 2‐chlorophenol, 2,4‐dichlorophenol and pentachlorophenol were 1.0–200 μg/L and 2.0–200 μg/L for 2,4,6‐trichlorophenol. The detection limits (S/N = 3) were in the range of 0.16–0.45 μg/L, the RSDs for intraday and interday precisions were <7.0%. Finally, the proposed method was successfully used to detect different environmental water samples. The recoveries of spiked water samples were ranged from 90.0 to 115%. At the same time, satisfactory repeatability was achieved with RSDs < 9.0%.     

Determination of 3-hydroxy pterocarpan, a novel osteogenic compound in rat plasma by liquid chromatography-tandem mass spectrometry: application to pharmacokinetics study

A rapid, sensitive and selective LC‐MS/MS method for the quantitative analysis of 3‐hydroxy pterocarpan (S006‐1709) in female rat plasma has been developed and validated. A Discovery RP₁₈ column was used for the chromatographic elution using acetonitrile and 0.1% acetic acid in water as mobile phase (80:20 v/v) at the flow rate of 0.5 mL/min. MS/MS analysis was performed using a triple quadrupole mass spectrometer with electrospray ionization in negative ion mode using biochanin as an internal standard (IS). Extraction of S006‐1709 and IS from rat plasma was done by liquid–liquid extraction method using diethyl ether. The LC‐MS/MS method was sensitive with 1.95 ng/mL as the limit of detection and 3.9 ng/mL as the lower limit of quantification. The method was linear in the concentration range of 3.9–1000 ng/mL. The percentage bias for intraday and interday accuracy was not greater than 4.2 and the %RSD for intraday and interday precision was not greater than 13.2. The recoveries of S006‐1709 and IS were 73.9–79.3 and 85.7%, respectively. S006‐1709 was found to be stable in various stability studies. The validated LC‐MS/MS method was successfully applied for the oral pharmacokinetics study of S006‐1709 at 10 mg/kg in female Sprague–Dawley rats. Copyright © 2010 John Wiley & Sons, Ltd.     

Sulfonated poly(styrene‐divinylbenzene) modified with amines and the application for pipette‐tip solid‐phase extraction of carbendazim in apples

Sulfonated poly(styrene‐divinylbenzene) modified with five kinds of amine functional groups was applied to the determination of carbendazim in apple samples with a pipette‐tip solid‐phase extraction method. The structures of the polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Five different modifications of the solid‐phase extraction sorbent based on sulfonated poly(styrene‐divinylbenzene) were tested under static and pipette‐tip solid‐phase extraction conditions. The polymer modified with p‐methoxyaniline showed the best recognition capacity and adsorption amount for carbendazim. Under the optimum conditions, 3.00 mg of the adsorbent, 1.00 mL of ethyl acetate as washing solvent, and 1.00 mL of ammonia/acetonitrile (5:95, v/v) as elution solvent were used in the pretreatment procedure of apple samples. The calibration graphs of carbendazim in methanol were linear over 5.00–200.00 μg/mL, and the limits of detection and quantification were 0.01 and 0.03 μg/mL, respectively. The method recoveries of carbendazim were in the range of 91.31–98.13% with associated intraday relative standard deviations of 0.76–2.13% and interday relative standard deviations of 1.10–1.85%. Sulfonated poly(styrene‐divinylbenzene) modified with p‐methoxyaniline showed satisfactory results (recovery: 97.96%) and potential for the rapid purification of carbendazim in apple samples combined with the pipette‐tip solid‐phase extraction.     

Simultaneous determination of NG‐monomethyl‐l‐arginine,NG,NG‐dimethyl‐l‐arginine,NG,NG′‐dimethyl‐l‐arginine,and l‐arginine using monolithic silica disk‐packed spin columns and a monolithic silica column

We have developed and validated a high‐performance liquid chromatography method that uses monolithic silica disk‐packed spin columns and a monolithic silica column for the simultaneous determination of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, and N^G,N^G′‐dimethyl‐l ‐arginine in human plasma. For solid‐phase extraction, our method employs a centrifugal spin column packed with monolithic silica bonded to propyl benzenesulfonic acid as a cation exchanger. After pretreatment, the methylated arginines are converted to fluorescent derivatives with 4‐fluoro‐7‐nitro‐2,1,3‐benzoxadiazole, and then the derivatives are separated on a monolithic silica column. l ‐Arginine concentration was also determined in diluted samples. Standard calibration curves revealed that the assay was linear in the concentration range 0.2–1.0 μM for methylated arginines and 40–200 μM for l ‐arginine. Linear regression of the calibration curve yielded equations with correlation coefficients of 0.999 (r²). The sensitivity was satisfactory, with a limit of detection ranging from 3.75 to 9.0 fmol for all four compounds. The RSDs were 4.3–4.8% (intraday) and 3.0–6.8% (interday). When this method was applied to samples from six healthy donors, the detected concentrations of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, N^G,N^G′‐dimethyl‐l ‐arginine and l ‐arginine were 0.05 ± 0.01, 0.41 ± 0.07, 0.59 ± 0.11, and 83.8 ± 30.43 μM (n = 6), respectively.     

Development of a γ‐alumina‐ nanoparticle‐functionalized porous polymer monolith for the enrichment of Sudan dyes in red wine samples

Monolithic materials were synthesized in capillaries by in situ polymerization with N‐isopropylacrylamide, glycidyl methacrylate, and ethylene dimethacrylate as the monomers, and methanol and PEG as the porogens. With γ‐alumina nanoparticles attached to the surface of the porous monolithic column via epoxide groups, a novel polymer monolith microextraction (PMME) material was prepared with a good mechanical stability and a high extraction capacity. SEM and X‐ray photoelectron spectroscopy were employed to characterize the modified monolithic column, demonstrating that γ‐alumina nanoparticles were effectively functionalized onto the monolithic column. In addition, a new method was developed for the analysis of Sudan I–IV dyes using PMME coupled with HPLC. In order to obtain the optimum extraction efficiency, the PMME conditions including desorption solvent type, sample pH, sample volume, sample flow rate, and eluent flow rate were investigated. Under the optimum conditions, we obtained acceptable linearities, low LODs, and good intra‐ and interday RDSs. When applied to the determination of Sudan I–IV dyes in red wine samples, satisfactory recoveries were obtained in the range of 84.0–115.9%.     

A Surface Grafting of Carbon Allotropes with in‐situ Generated 3‐aryl Diazonium Chlorides: Electrochemical Kinetic Studies

In this work three different carbon allotropes: multi‐walled carbon nanotubes (MWCNT), graphene and carbon nanohorns (CNH) were covalently bound with in‐situ generated 3‐diazonium aryl chlorides. These species were attached to the carbon surface using an electrochemically‐initiated radical coupling, similar to the Gomberg‐Bachman type reaction. An electrochemical grafting of the extended π‐systems at the carbon surface was performed in aqueous media in a simple 3‐electrode system and its kinetics was investigated by a modified Butler‐Volmer approach. The analysis of Hammett constants demonstrated a strong influence of the type of electron donating‐/withdrawing substituents on the reduction potential peak position and the peak current. Moderately or strong electron withdrawing groups like ‐carboxy or ‐nitro tend to shift reduction potential towards more positive values, which facilitates an electron uptake. The deposition time varies for different carbon allotropes and depends on the carbon graphitization and the surface area. The best surface coverage was obtained at 90–150 sec of the deposition. Although, the surface functionalities are less conductive than the carbon, the electrodes showed a low internal resistance and thus a high rate of electron transfer (high exchange current density and the electron transfer rate constant), with the most promising observed for carbon nanohorns. The best performing carbon revealed also superior mass transport of the redox active species toward the electrode surface, owing to their unique particle shapes and its very porous structure. The Tafel analysis complemented by an impedance spectroscopy allowed selecting the best carbon substrate for the functionalization with a 3‐aminobenzoic acid.     

Determination of endocrine disruptors in environmental waters using poly(acrylamide-vinylpyridine) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography with fluorescence detection

A method for the determination of endocrine disruptors, bisphenol A and 17alpha-ethinylestradiol, in environmental water samples was developed using in-tube solid-phase microextraction followed by liquid chromatography and fluorescence detection. A poly(acrylamide-vinylpyridine) monolithic capillary column was applied as the extraction media in view of its greater phase ratio than open-tubular capillaries and thus higher extraction efficiency. After optimizing the extraction conditions, bisphenol A and 17alpha-ethinylestradiol were extracted directly from water samples in a wide dynamic linear range of 0.5-1000 ng mL(-1), with the detection limits obtained as 0.064 and 0.12 ng mL(-1), respectively. The precision of the method was satisfactory with the intraday and interday RSD values smaller than 7.2%. Environmental water samples of different sources were successfully analyzed with the presented method and the monolithic capillary was proved to be robust and reusable in analyzing real water samples.     

Photosensitizing Electron Transfer Processes of Fullerenes,Carbon Nanotubes,and Carbon Nanohorns

In this account, studies on the photosensitizing electron transfer of nanocarbons, such as fullerenes, single‐walled carbon nanotubes (SWCNTs), and carbon nanohorns (CNH), performed in our laboratory for about 15 years in the early 21st century have been briefly reviewed. These novel nanocarbons act as excellent electron acceptors, when they are linked to light‐absorbing electron donors, such as porphyrins or phthalocyanines. For such molecule–nanocarbon hybrids, the direct confirmation of fast, transient, electron‐transfer phenomena must be performed with time‐resolved spectroscopic methods, such as transient absorption spectral measurements, in addition to fluorescence time‐profile measurements in the wide‐wavelength regions. Careful use of these methods affords useful information to understand photoinduced electron‐transfer mechanisms. In addition, kinetic data obtained by these methods can assist in the construction of light‐active devices, such as photovoltaic cells and solar H₂‐generation systems.     

Sodium desoxycholate‐assisted capillary electrochromatography with methacrylate ester‐based monolithic column on fast separation and determination of coumarin analogs in Angelica dahurica extract

A rapid and sensitive CEC method with methacrylate ester‐based monolithic column has been developed for separation and determination of five coumarins (byakangelicin, oxypeucedanin hydrate, xanthotoxol, 5‐hydroxy‐8‐methoxypsoralen and bergapten) in Angelica dahurica extract. Surfactant sodium desoxycholate (SDC) was introduced into the mobile phase as the pseudostationary to dynamically increase the selectivity of analytes instead of increasing the hydrophobicity of stationary phase. In addition, other factors, pH of phosphate buffer, ACN content and applied voltage, for instance, have also an obvious effect on the resolution but little on the retention time. Satisfactory separation of these five coumarins was achieved within 6 min under a 30:70 v/v ACN–buffer containing 20 mM sodium dihydrogen phosphate (NaH₂PO₄) and 0.25 mM SDC at pH 2.51. The RSDs of intraday and interday for relative peak areas were less than 3.0% and 4.7%, respectively; and the recoveries were between 87.5% and 95.0%. The LODs were lower than 0.15 μg/mL and the LOQs were lower than 0.30 μg/mL, respectively, while calibration curves showed a good linearity (r² > 0.9979). Finally, five target coumarins from the crude extracts of A. dahurica were separated, purified, and concentrated by D‐101 macroporous resin, and were successfully separated and quantitatively determined within 6 min.     

Enantioselective determination of carboxyl acid amide fungicide mandipropamid in vegetables and fruits by chiral LC coupled with MS/MS

An efficient enantioselective method for the determination of mandipropamid in vegetables and fruits was presented by LC coupled with MS/MS. The mandipropamid residues in samples (potato, pepper, grape, and watermelon) were extracted with acetonitrile containing 1% acetic acid. An aliquot was cleaned up with primary and secondary amine and C₁₈ sorbent. Complete enantioseparation of mandipropamid enantiomers in <4 min was obtained on a Lux Cellulose‐2 column at 25°C using methanol with 0.1% formic acid/0.1% aqueous formic acid solution (85:15, v/v) as mobile phase. Good linearity was obtained over the concentration range of 0.5–250 μg/L for each enantiomer in the standard solution and sample matrix calibration curves. Quantification was achieved using matrix‐matched standard calibration curves. The interday mean recoveries, intraday repeatability, and inter‐day reproducibility varied from 76.4 to 97.1%, 3.4 to 9.4%, and 3.5 to 11.4%, respectively. The limits of quantification for mandipropamid enantiomers in vegetables and fruits were both 1 μg/kg. Moreover, the absolute configuration of mandipropamid enantiomers was determined by the combination of experimental and predicted electronic circular dichroism spectra, and the first eluted enantiomer was confirmed as (R)‐mandipropamid on five chiral columns.     

Surface‐activated chemical ionization and cation exchange chromatography for the analysis of enterotoxin A

Surface‐activated chemical ionization (SACI) has been widely used in recent years for the analysis of different compounds (e.g. peptides, street drugs, amino acids). The main benefits of this technology are its high sensitivity and its effectiveness under different chromatographic conditions [i.e. ion exchange chromatography and reversed‐phase (RP) chromatography]. Here we used SACI in conjunction with quadrupole time‐of‐flight mass spectrometry to analyze enterotoxin A, which is produced by Staphylococcus aureus, in milk matrix using both RP and ion exchange chromatographies. SACI had increased sensitivity as compared with electrospray ionization. Moreover, the higher quantitation efficiency of this technique, mainly in terms of limit of detection (0.01 ng/ml), limit of quantitation (0.05 ng/ml), linearity range (0.05–50 ng/ml), matrix effect, accuracy (intraday and interday accuracy errors were 9.2% and 10.3%, respectively) and precision (intraday and interday precision errors were 5.3% and 12.8%, respectively), is shown and discussed. Copyright © 2009 John Wiley & Sons, Ltd.