Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

Enhanced Performance of a Microbial Fuel Cell with a Capacitive Bioanode and Removal of Cr (VI) Using the Intermittent Operation

This study investigated a system which simultaneously produced electricity and stored energy in the MFC integrated MnO₂-modified capacitive bioanode. Compared to the noncapacitive anode, the maximum power density of MFC with MnO₂-modified bioanode reached 16.47 W m^?3, which was 3.5 times higher than that of the bare anode (4.71 W m^?3). During the charging-discharging experiment, the MFC with a capacitance bioanode has a higher average peak current density of 5.06 mA cm^?2 and 36 times larger than that with the bare bioanode. With the capacitive electrode, it is possible to let the MFC at the same time for production and storage of renewable electricity. Then two different operations (intermittent operation and continuous operation) of the MFC with a capacitive bioanode were studied to degrade Cr (VI) in cathode chamber. Results showed that the Cr (VI) removal rates of intermittent operation are much higher than that of continuous operation under the same time in the closed circuit state. This is due to the good ability of storing and releasing electron of the biological capacitor with MnO₂ modified material. And this study showed that MFC with a capacitive bioanode is better adapted to treat heavy metal pollutants by intermittent mode.     

Binder Free Modification of Glassy Carbon Electrode by Employing Reduced Graphene Oxide/ZnO Composite for Voltammetric Determination of Certain Nitroaromatics

Reduced Graphene oxide/ZnO nanoflowers ( rGO/ZnO‐NFs ) composite has been synthesized in‐situ using asymmetric Zn complex ( 1 ) as a single‐source molecular precursor (SSMP) with GO at 150 °C. The rGO/ZnO‐NFs composite was characterized by PXRD, UV‐vis, SEM, EDX mapping, TEM and SAED pattern to confirm its purity and morphology. The rGO/ZnO‐NFs composite shows uniform distribution of nanoflowers on graphene sheets. The modified glassy carbon electrode ( GCE ) was fabricated by drop wise layering of the rGO/ZnO‐NFs composite at the surface of the GCE without using binder. The binder free modified electrode ( GCE‐rGO/ZnO ) was explored for detection of nitroaromatics such as p‐nitro‐phenol ( p ‐NP ), 2,4‐dinitrophenol ( 2,4‐DNP ), 2,4‐dinitrotoluene ( 2,4‐DNT ) and 2,4,6‐trinitrophenol ( 2,4,6‐TNP ). The fabricated sensor showed remarkable response for the both toxicants and explosives. The LOD, sensitivity and linear range for the studied toxicants and explosives were found to be in a good range: p ‐NP= 0.93 μM, 240 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4‐DNP= 6.2 μM, 203 μA mM⁻¹ cm⁻² and 0.1–0.9 mM; 2,4‐DNT= 10 μM, 371 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4,6‐TNP= 16 μM, 514 μA mM⁻¹ cm⁻² and 0.2–0.9 mM, respectively.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Tweaking Nickel with Minimal Silver in a Heterogeneous Alloy of Decahedral Geometry to Deliver Platinum-like Hydrogen Evolution Activity

Five-fold intertwined Ag_xNi_1−x (x=0.01–0.25) heterogeneous alloy nanocrystal (NC) catalysts, prepared through unique reagent combinations, are presented. With only ca. 5 at % Ag (AgNi-5), Pt-like activity has been achieved at pH 14. To reach a current density of 10 mA cm⁻² the extremely stable AgNi-5 requires an overpotential of 24.0±1.2 mV as compared to 20.1±0.8 mV for 20 % Pt/C, both with equal catalyst loading of 1.32 mg cm⁻². The turnover frequency (TOF) is as high as 2.1 H₂ s⁻¹ at 50 mV (vs. RHE). Site-specific elemental analyses show the Ag:Ni compositional variation, where the apex and edges of the decahedra are Ag-rich, thereby exposing Ni onto the faces to achieve maximum charge transport for an exceptional pH universal HER activity. DFT calculations elucidate the relative H-atom adsorption capability of the Ni centers as a function of their proximity to Ag atom.     

Enhanced NADH Oxidation Using Polytyramine/Carbon Nanotube Modified Electrodes for Ethanol Biosensing

Polytyramine (PT) has been electro‐deposited onto multi‐walled carbon nanotube (MWCNT) modified glassy carbon (GC) electrodes via oxidation of tyramine in 0.1 M H₃PO₄ by cycling the potential over the range of −400 mV to 1300 mV (versus Ag/AgCl). The reactivity of the resulting chemically‐modified electrodes was characterized using cyclic voltammetry in the presence and absence of reduced nicotinamide adenine dinucleotide (NADH). The modified electrodes displayed electrochemical activity due to the formation of quinone species and were catalytically active towards NADH oxidation by lowering the oxidation peak potential by 170 mV compared to the value of the MWCNT modified electrode with a peak potential of 180±10 mV (versus Ag/AgCl). The MWCNT/PT surface was further characterized using SEM and XPS methods, which indicated that a thin polymeric film had been formed on the electrode surface. The present work demonstrates the advantage of using PT as a platform that combines both the immobilization of alcohol dehydrogenase (ADH) and the mediation of NADH oxidation at a low overpotential essential to the design of high performance ethanol biosensors, all within an easily electropolymerizable film. The resulting biosensor displayed an ethanol sensitivity of 4.28±0.06 μA mM⁻¹ cm⁻², a linear range between 0.1 mM and 0.5 mM and a detection limit of 10 μM.     

Improving the Electrocatalytic Activity of a Nickel-Organic Framework toward the Oxygen Evolution Reaction through Vanadium Doping

Metal-organic frameworks (MOFs) have been considered as potential oxygen evolution reaction (OER) electrocatalysts owning to their ultra-thin structure, adjustable composition, high surface area, and high porosity. Here, we designed and fabricated a vanadium-doped nickel organic framework (V_1−x−Ni_xMOF) system by using a facile two-step solvothermal method on nickel foam (NF). The doping of vanadium remarkably elevates the OER activity of V_1−x−Ni_xMOF, thus demonstrating better performance than the corresponding single metallic Ni-MOF, NiV-MOF and RuO₂ catalysts at high current density (>400 mA cm⁻²). V_0.09−Ni_0.91MOF/NF provides a low overpotential of 235 mV and a small Tafel slope of 30.3 mV dec⁻¹ at a current density of 10 mA cm⁻². More importantly, a water-splitting device assembled with Pt/C/NF and V_0.09−Ni_0.91MOF/NF as cathode and anode yielded a cell voltage of 1.96 V@1000 mA cm⁻², thereby outperforming the-state-of-the-art RuO₂⁽⁺⁾||Pt/C⁽⁻⁾. Our work sheds new insight on preparing stable, efficient OER electrocatalysts and a promising method for designing various MOF-based materials.     

Metal Oxide Nanostructures Generated from In Situ Sacrifice of Zinc in Bimetallic Textures as Flexible Ni/Fe Fast Battery Electrodes

An “in situ sacrifice” process was devised in this work as a room‐temperature, all‐solution processed electrochemical method to synthesize nanostructured NiO_x and FeO_x directly on current collectors. After electrodepositing NiZn/FeZn bimetallic textures on a copper net, the zinc component is etched and the remnant nickel/iron are evolved into NiO_x and FeO_x by the “in situ sacrifice” activation we propose. As‐prepared electrodes exhibit high areal capacities of 0.47 mA h cm⁻² and 0.32 mA h cm⁻², respectively. By integrating NiO_x as the cathode, FeO_x as the anode, and poly(vinyl alcohol) (PVA)‐KOH gel as the separator/solid‐state electrolyte, the assembled quasi‐solid‐state flexible battery delivers a volumetric capacity of 6.91 mA h cm⁻³ at 5 mA cm⁻², along with a maximum energy density of 7.40 mWh cm⁻³ under a power density of 0.27 W cm⁻³ and a maximum tested power density of 3.13 W cm⁻³ with a 2.17 mW h cm⁻³ energy density retention. Our room‐temperature synthesis, which only consumes minute electricity, makes it a promising approach for large‐scale production. We also emphasize the in situ sacrifice zinc etching process used in this work as a general strategy for metal‐based nanostructure growth for high‐performance battery materials.     

The phenol efficient degradation using co-culture coupled with enhanced electricity generation capability

The co-culture of strain Citrobacter sp. RDC and Geobacter sulfurreducens PCA was used in this study and it was found that the co-culture using 200 mg/L phenol as carbon source exhibited higher maximum current density than using the single strain RDC and G. sulfurreducens PCA, respectively. Meanwhile, the co-culture was used to generate electricity by degrading phenol with the current density of 699.07 μA/cm² by using 200 mg/L phenol as the sole carbon source, which was higher than that only using G. sulfurreducens PCA (236.20 μA/cm²). Especially, the degradation efficiency of 200 mg/L phenol by co-culture can reach 55.16 % within 36 h being 4.16-fold higher than the single strain G. sulfurreducens PCA. Furthermore, the component ratio of two strains was optimized for increasing electricity generation using 500 mg/L phenol as carbon source. The maximum current density was 501.54 μA/cm² under the ratio of 3 : 1 for strain RDC to G. sulfurreducens PCA. These results highlight that phenol is good carbon source for co-culture to produce electricity. The co-culture system provides a promising application pathway for phenol degradation treatment coupled with electricity generation in the future.     

A Flexible Energy Harvester from an Organic Ferroelectric Ammonium Salt

Organic ferroelectrics due to their low cost, easy preparation, light weight, high flexibility and phase stability are gaining tremendous attention in the field of portable electronics. In this work, we report the synthesis, structure and ferroelectric behavior of a two-component ammonium salt 2 , containing a bulky [Bn(4-BrBn)NMe₂]⁺ (Bn=benzyl and 4-BrBn=4-bromobenzyl) cation and tetrahedral (BF₄)⁻ anion. The structural analysis revealed the presence of rich non-classical C−H⋅⋅⋅F and C−H⋅⋅⋅Br interactions in this molecule that were quantified by Hirshfeld surface analysis. The polarization (P) vs. electric field (E) hysteresis loop measurements on 2 gave a remnant polarization (P_r) of 14.4 μC cm⁻² at room temperature. Flexible polymer composites with various (5, 10, 15 and 20) weight percentages (wt%) of 2 in thermoplastic polyurethane (TPU) were prepared and tested for mechanical energy harvesting applications. A notable peak-to-peak output voltage of 20 V, maximum current density of 1.1 μA cm⁻² and power density of 21.1 μW cm⁻² were recorded for the 15 wt% 2 -TPU composite device. Furthermore, the voltage output generated from this device was utilized to rapidly charge a 100 μF capacitor, with stored energies and measured charges of 156 μJ and 121.6 μC, respectively.     

An Arrayed Micro‐glutamate Sensor Probe Integrated with On‐probe Ag/AgCl Reference and Counter Electrodes

Complete all‐in‐one multi‐arrayed glutamate (Glut) sensors have been constructed on a silicon‐based micromachined probe composed of micro‐platinum (Pt) working electrodes, a micro‐silver/silver chloride (Ag/AgCl) reference electrode (RE), and a micro‐Pt counter electrode (CE). The OCP shift of the electrodeposited Ag/AgCl on‐probe micro‐reference electrode compared with a Ag/AgCl wire is <0.1 mV/h. The composition ratio of Ag, Cl, and Pt on the electrodeposited on‐probe micro‐reference electrode is observed to be 1.00 : 0.48 : 0.02 analyzed by EDS. The miniaturized amperometric Glut biosensors were constructed on working electrode sites (electrode area: ∼8.5×10⁻⁵ cm²) of the microprobe modified with glutamate oxidase (GlutOx) enzyme layers for the selective, fast, and continuous detection of L‐glutamate. The sensor selectivity towards common electroactive interferents has been improved significantly by coating the electrode surface with perm‐selective polymer layers, overoxidized polypyrrole (PPY) and Nafion®. The sensitivity, detection range, and response time of the proposed all‐in‐one Glut biosensors are 204.7±5.8 nA μM⁻¹ cm⁻² (N=5), 4.99–109 μM, and 2.7±0.3 sec, respectively and no interferent signals of AA and DA were observed. The sensor can be reused over 19 times of continuous repetitive operation (total measurement time: ∼4 hours) and the sensor sensitivity can retain up to four weeks of storage.     

Biofuel Cell Based on Anode and Cathode Modified by Glucose Oxidase

A single compartment biofuel cell (BFC) based on an anode and a cathode powered by the same fuel glucose is reported. Glucose oxidase (GOx) from Aspergillus niger was applied as a glucose consuming biocatalyst for both anode and cathode of the BFC. The 5‐amino‐1,10‐phenanthroline modified graphite rod electrode (GRE) with cross‐linked GOx was used as the bioanode, and the GRE with co‐immobilised horseradish peroxidase and GOx was exploited as the biocathode of the BFC. The open‐circuit voltage of the designed BFC exceeded 450 mV and a maximal power density of 3.5 µW/cm² was registered at a cell voltage of 300 mV.     

Facile and Large-Scale Fabrication of Sub-3 nm PtNi Nanoparticles Supported on Porous Carbon Sheet: A Bifunctional Material for the Hydrogen Evolution Reaction and Hydrogenation

Facile and large-scale preparation of materials with uniform distributions of ultrafine particles for catalysis is a challenging task, and it is even more difficult to obtain catalysts that excel in both the hydrogen evolution reaction (HER) and hydrogenation, which are the corresponding merging and splitting procedures of hydrogen, respectively. Herein, the fabrication of ultrafine bimetallic PtNi nanoparticles embedded in carbon nanosheets (CNS) by means of in situ self-polymerization and annealing is reported. This bifunctional catalyst shows excellent performance in the hydrogen evolution reaction (HER) and the hydrogenation of p-nitrophenol. Remarkably PtNi bimetallic catalyst with low metal loading (PtNi₂@CNS-600, 0.074 wt % Pt) exhibited outstanding HER activity with an overpotential as low as 68 mV at a current density of 10 mA cm⁻² with a platinum loading of only 0.612 μg_Pt cm⁻² and Tafel slope of 35.27 mV dec⁻¹ in a 0.5 m aqueous solution of H₂SO₄, which is comparable to that of the 20 % Pt/C catalyst (31 mV dec⁻¹). Moreover, it also shows superior long-term electrochemical durability for at least 30 h with negligible degradation compared with 20 % Pt/C. In addition, the material with increased loading (mPtNi₂@CNS-600, 2.88 % Pt) showed robust catalytic activity for hydrogenation of p-nitrophenol at ambient pressure and temperature. The catalytic activity towards hydrogen splitting is a circumstantial evidence that agrees with the Volmer–Tafel reaction path in the HER.     

Multilayer structured carbon nanotubes/poly-l-lysine/laccase composite cathode for glucose/O2 biofuel cell

Multilayer film of laccase, poly-l-lysine (PLL) and multi-walled carbon nanotubes (MWNTs) were prepared by a layer-by-layer self-assembly technique. The results of the UV–vis spectroscopy and scanning electron microscopy studies demonstrated a uniform growth of the multilayer. The catalytic behavior of the modified electrode was investigated. The (MWNTs/PLL/laccase)_n multilayer modified electrode catalyzed four-electron reduction of O₂ to water, without any mediator. The possible application of the laccase-catalyzed O₂ reduction at the (MWNTs/PLL/laccase)_n multilayer modified ITO electrode was illustrated by constructing a glucose/O₂ biofuel cell with the (MWNTs/thionine/AuNPs)₈ GDH film modified ITO electrode as a bioanode and the (MWNTs/PLL/laccase)₁₅ film modified ITO electrode as a biocathode. The open-circuit voltage reached to 700 mV, and the maximum power density achieved 329 μW cm⁻² at 470 mV of the cell voltage.     

Constant Electricity Generation in Nanostructured Silicon by Evaporation-Driven Water Flow

Recently, hydrovoltaic technology emerged as a novel renewable energy harvesting method, which dramatically extends the capability to harvest water energy. However, the urgent issue restricting its device performance is poor carrier transport properties of the solid surface if large charged interface is considered simultaneously. Herein, a hydrovoltaic device based on silicon nanowire arrays (SiNWs), which provide large charged surface/volume ratio and excellent carrier transport properties, yields sustained electricity by a carrier concentration gradient induced by evaporation-induced water flow inside nanochannels. The device can yield direct current with a short-circuit current density of over 55 μA cm⁻², which is three orders larger than a previously reported analogous device (approximately 40 nA cm⁻²). Moreover, it exhibits a constant output power density of over 6 μW cm⁻² and an open-circuit voltage of up to 400 mV. Our finding may pave a way for developing energy-harvesting devices from ubiquitous evaporation-driven internal water flow in nature with semiconductor material of silicon.     

Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

Improved Sensing Performance of Amperometric Urea Biosensor by Using Platinum Nanoparticles

A novel Platinum nanoparticle (PtNPs) modified Poly(pyrrole-co-1-(2-Aminophenyl)pyrrole)/Urease film coated Au electrode was designed for amperometric detection of urea. PtNPs quantity, film density and pH were optimized and interference effect of some substances readily found in municipal wastewater and blood was investigated. The biosensor responded to urea with a measurement concentration range of 0.1 to 30 mM, a sensitivity of 31.8 μA mM⁻¹ cm⁻², a LOD of 7.58 μM, an accuracy of 104 % and a RSD% of only 0.82. It sensed the concentration of urea in the municipal sewage water with recovery of 97.6 % (n=3) and remained 78 % of its initial response at 28^th day. Results confirmed that PtNPs with strong conductivity improved the electron transfer ability of the working electrode.     

Enzymatic Electrosynthesis of Alkanes by Bioelectrocatalytic Decarbonylation of Fatty Aldehydes

An enzymatic electrosynthesis system was created by combining an aldehyde deformylating oxygenase (ADO) from cyanobacteria that catalyzes the decarbonylation of fatty aldehydes to alkanes and formic acid with an electrochemical interface. This system is able to produce a range of alkanes (octane to propane) from aldehydes and alcohols. The combination of this bioelectrochemical system with a hydrogenase bioanode yields a H₂/heptanal enzymatic fuel cell (EFC) able to simultaneously generate electrical energy with a maximum current density of 25 μA cm^?2 at 0.6 V and produce hexane with a faradaic efficiency of 24 %.     

A Ferroelectric Aminophosphonium Cyanoferrate with a Large Electrostrictive Coefficient as a Piezoelectric Nanogenerator

Hybrid materials possessing piezo- and ferroelectric properties emerge as excellent alternatives to conventional piezoceramics due to their merits of facile synthesis, lightweight nature, ease of fabrication and mechanical flexibility. Inspired by the structural stability of aminophosphonium compounds, here we report the first A₃BX₆ type cyanometallate [Ph₂(ⁱPrNH)₂P]₃[Fe(CN)₆] ( 1 ), which shows a ferroelectric saturation polarization (P_s) of 3.71 μC cm⁻². Compound 1 exhibits a high electrostrictive coefficient (Q₃₃) of 0.73 m⁴ C⁻², far exceeding those of piezoceramics (0.034–0.096 m⁴ C⁻²). Piezoresponse force microscopy (PFM) analysis demonstrates the polarization switching and domain structure of 1 further confirming its ferroelectric nature. Furthermore, thermoplastic polyurethane (TPU) polymer composite films of 1 were prepared and employed as piezoelectric nanogenerators. Notably, the 15 wt % 1 -TPU device gave a maximum output voltage of 13.57 V and a power density of 6.03 μW cm⁻².     

Enhanced Photoelectrochemical Water Splitting of Black Silicon Photoanode with pH-Dependent Copper-Bipyridine Catalysts

Since the water oxidation half-reaction requires the transfer of multi-electrons and the formation of O−O bond, it's crucial to investigate the catalytic behaviours of semiconductor photoanodes. In this work, a bio-inspired copper-bipyridine catalyst of Cu(dcbpy) is decorated on the nanoporous Si photoanode (black Si, b-Si). Under AM1.5G illumination, the b-Si/Cu(dcbpy) photoanode exhibits a high photocurrent density of 6.31 mA cm⁻² at 1.5 V_RHE at pH 11.0, which is dramatically improved from the b-Si photoanode (1.03 mA cm⁻²) and f-Si photoanode (0.0087 mA cm⁻²). Mechanism studies demonstrate that b-Si/Cu(dcbpy) has improved light-harvesting, interfacial charge-transfer, and surface area for water splitting. More interestingly, b-Si/Cu(dcbpy) exhibits a pH-dependent water oxidation behaviour with a minimum Tafel slope of 241 mV/dec and the lowest overpotential of 0.19 V at pH 11.0, which is due to the monomer/dimer equilibrium of copper catalyst. At pH ∼11, the formation of dimeric hydroxyl-complex could form O−O bond through a redox isomerization (RI) mechanism, which decreases the required potential for water oxidation. This in-depth understanding of pH-dependent water oxidation catalyst brings insights into the design of dimer water oxidation catalysts and efficient photoanodes for solar energy conversion.